Wireless keypad not pairing with imac

I purchased a wireless keypad for my iMac but can't get it to pair with the Mac. The computer recognizes it but pairing is unsuccessful. I can't get it to work.

How did you get on? My brother is having a similar problem, he bought a replacement wireless keyboard which is not recognized by/paired with his iMac and thus he can't login..

Similar Messages

  • Wireless keyboard not pairing with IMac while mouse

    I am having trouble with the wireless keyboard entering my password when booting up. It will not let me enter any characters. My wireless mouse & trackpad seem to work fine. Right now I am submitting this issue through my Ipad (3rd Gen) using the same keyboard that will not pair with my IMac. I called Apple tech yesterday and he had me remove  the new batteries from the keyboard and depress the power button for one minute, then replace the batteries and power up the Imac. That solution seemed to work yesterday. Last evening i shut the machine down and tried to start today and had the same issue. The keyboard is working fine with this Ipad and had no trouble recognizing it on bluetooth. Has anybody had this same problem, I was considering purchasing a USB apple keyboard until I tried the keyboard with a different device (my ipad)

    How did you get on? My brother is having a similar problem, he bought a replacement wireless keyboard which is not recognized by/paired with his iMac and thus he can't login..

  • Wireless Keyboard Will Not Pair With iMac

    After installing Security Update 2007-007 and Pro Applicatiion Support 4.0.1 my wireless keyboard stopped being recognized by my computer. When I run my Bluetooth Setup Assistant it sees my keyboard but I can not pair it. I even installed new battteries in it thinking that was the problem. I had a brand new never used wireless keyboard in the closet which i got out and installed batteries in it and it will also not pair with my iMac. Any sugggestions will be greatly appreciated since I am stumped! Oh, my wireless mouse is working fine.

    The model number is M9270LL/A (its the one that comes with the iMac). When the screen comes up and asks for you to enter a set of numbers to pair with the computer and I type the nembers on the keyboard I then receive an message that an error has occured. I try and try again to pair the keyboard to the computer with the same results. Thanks.

  • Apple keyboard not pairing with iMac

    My wireless keyboard was working fine just until 2 weeks ago when I went out of town for a couple of weeks (and it has worked fine for over 2 years now).  Now it is giving me problems pairing with my iMac.  I've gone through all the support discussions and I've tried everything. 
    I uncoupled the device from the computer because it was not connecting and have tried connecting it ever since and nothing seems to work.  The computer seems to "find" the keyboard but won't connect to it.
    I have pushed down the power button the entire time during pairing process as suggested by some people with the problem on the discussion boards and that doesn't do it either.   While occasionally the computer will see the keyboard, it just does not seem to want to connect to it.  The green light comes on for a bit when I hold the power key down (or even when I just push it once) and then goes off.  It never blinks i.e. it doesn't seem like it's going into pairing mode at all.
    This is really confounding.  Any help would be greatly greatly appreciated.  I'm already 3 hours in the whole trying to fix this.

    Thanks Barry.
    I had already deleted the KB from the bluetooth preferences and it was discoverable, so no idea why it wasn't working.
    However, eventually what ended up working was that I turned the iMac off, I took the keyboard to work (i.e. away from anywhere near the iMac's vicinity) and then when I brought it back at the end of the day, the green light suddenly started blinking again and the iMac discovered the KB.   I don't know how these things are designed but apparently, you need to take the KB out of the range of the device it was formerly paired with EVEN IF you have deleted the device from the bluetooth preferences.  Otherwise, somehow, the pairing is still remembered and the device is not recognized.
    If this happens again, next time, I'll try your reset SMC suggestion.  thanks for your help.

  • Pxc360bt not pairing with iMac

    I have a pair of Sennheiser pxc360bt bluetooth headphones which pair fine with my 4g ipod touch and even my android tablet. However when i try to pair with my imac (intel i5) it cannot find the headphones when i search for available devices in the bluetooth setup assistant. Any ideas how to fix the issue. I assume its a problem with the mac and not the headphones.

    Thanks Barry.
    I had already deleted the KB from the bluetooth preferences and it was discoverable, so no idea why it wasn't working.
    However, eventually what ended up working was that I turned the iMac off, I took the keyboard to work (i.e. away from anywhere near the iMac's vicinity) and then when I brought it back at the end of the day, the green light suddenly started blinking again and the iMac discovered the KB.   I don't know how these things are designed but apparently, you need to take the KB out of the range of the device it was formerly paired with EVEN IF you have deleted the device from the bluetooth preferences.  Otherwise, somehow, the pairing is still remembered and the device is not recognized.
    If this happens again, next time, I'll try your reset SMC suggestion.  thanks for your help.

  • A1255 Wireless keyboard not pairing with macbook pro 10.6.5

    Trying to pair my wireless keyboard with macbook pro but it's not pairing.
    What i did is :
    System Preference -> Keyboard -> set up bluetooth wirless keyboard
    my keyboard appears for a moment and the i goes off.
    it says 1 keyboard found then keep searching and suddenly no keyboard found.
    Any help is appreciated.
    Cheers

    Hello H:
    These forums are not chat rooms, but since you used my name I will address your post.
    Do you work for Apple?
    No. These are user-to-user forums. The forums are moderated by Apple, but do not represent official responses from the company. If an Apple employee would post here (very rare), they would have either a purple apple (forum host) or a silver apple (employee) under their name.
    Every post about this issue, going back to early 2009 you have made the SAME suggestion. It doesn't work.
    That statement is inaccurate. If you read the posts carefully, I do not cut/paste the same suggestion to address issues. However, trying to address issues without hands-on access to devices necessarily requires one to suggest solutions that have worked in similar situations. Bluetooth issues are not rocket science and there are only a few things that are available to resolve problems. If you look at the little blue bars next to my name that represent user +"thank yous+" for suggestions that worked, I must have made a few suggestions that did work.
    Like everyone else that tries to help others here, we are unpaid volunteers. If you have better sources to obtain information, I certainly recommend that you seek those sources out. If you have issues with Apple, take them up with the company. Ranting here about your particular problem is not helping anyone.
    Barry

  • White A1016 wireless keyboard not pairing with new MacBook Pro

    I still have (and love) the original white bluetooth Mac keyboard (model A1016, with numeric keypad and function keys). It won't pair to my new MacBook Pro. It's discoverable, appears in the list, I can select it and try to pair. Then it sits with the spinning wheel for some time before giving up.
    Oddly, if I press "return" during the spinning, it (very) briefly displays the passcode, but of course by then it's too late, and fails saying that I got the passcode wrong!
    This appears to be a Bluetooth system preference problem - is anyone else seeing this?
    This Apple technote suggests that this keyboard should work with iOS, whereas the original aluminium one doesn't (although it's not entirely clear)... if it works with iOS, I can't see why it won't work with OS X 10.8.4!

    My old Bluetooth Mighty Mouse won't work with my newer MBP running Mountain Lion, either. I suspect that the keyboard is incompatible with your new machine/OS X 10.8.x.
    Clinton

  • Cannot get wireless keypad to sync with imac.

    Cannot get new wireless keyboard to sync.

    Tough to help you without knowing what the device is, I'm assuming it's at least a blue tooth device and  you have checked to see if it's compatible with 10.8.3.

  • IPad 2 can't pair with iMac wireless Keyboard (late 2009)

    ipad 2 will not pair with wireless keyboard that came with iMac late 2009.
    I've read countless ways to do this in support forums, but no matter what I do, I can not get the ipad 2 to work with my wireless keyboard.
    In settings>bluetooth, I UNCHECKED discoverable for the keyboard, as I've read many times.
    I then clicked the minus button and a box came up ( I can not recall what it said but it basically asked if I wanted to ?remove? the device, and I clicked OK.
    Then, I went to the iPad 2, into bluetooth, and went to pair it. The keyboard was discoverable, and then something with a code came up on the iPad screen, and I clicked OK.
    NOTHING happened, even though it said it was connected.
    I looked at my iMac screen, and there was something there with a code that had to be typed in? This is where I get confused. I disconnected the keyboard, yet I got a box on the iMac screen, asking me to put the code in to pair it with the ipad 2 !  I figured it must be a mistake, because I disconnected the keyboard from the imac.
    well, I tried to key in the code and it worked on the IMAC...which, technically, it should not have been able to do.
    I've watched countless Youtube videos, read through the support forums here and...I can't find anyone with  this same problem and so, I toss it out to you all in Apple Support.
    What could I be doing wrong?? 
    Thanks.

    Spoke with an Apple Care Tech today on this issue:
    Apparently, this is how it works : First, you have to go to BLUE TOOTH and when you see your keyboard, delete it or remove it, and then shut down the computer.
    Then, you must go to your iPAD. (initially, your blue tooth on iPAD should be TURNED OFF- now, turn it ON.
    Press and hold the button on the right side of your keyboard for 5 seconds, and watch for it to blink then go off.
    Next, push the button on the side of the keyboard again, it will go on.
    On your ipad, under Blue Tooth, you will see some numbers and it might say NOT CONNECTED. Click that.
    Be patient and then under that, something like YOUR NAME KEYBOARD will appear. Click it and it will give you a code to type in. Type it in. Be patient. Might not take the first time. Do it again. When the code comes up again, type it in again.
    This worked for me as suddenly the keyboard was paired with the iPAD 2.
    When you want to unpair it, turn blue tooth on the  ipad OFF. Turn your computer back on. Initially your screen will come up to sign in (if you have it set up that way). In a few seconds, you will see that your keyboard has reconnected to your Mac. Sign in and that's that:)

  • My bluetooth keyboard (Macnus 3.0) is recognised by my iMac but will  not pair?  I have paired it with my iPad using code 8310 but it still will not pair with my iMac.  Can someone help please?

    My bluetooth keyboard (Macnus brand - bought recently in Thailand)(similar to Mac small keyboard) will pair with my iPad using code 8310,and is recognized by my iMac but will not pair?
    There are very scant instructions with the keyboard and no mention of any code (the code was prompted by my iPad).
    I have followed the instructions but it still will not pair with my iMac!
    Can anyone help please?
    My iMac is 20 inch  Mid 2007 OSX10.9.1 4GB RAM

    Hi All, thank you for you suggestions.  I have been unable to find any website for the maker, but have looked at several Thai/cambodian sites incl <http://www.buycoms.com/Article/8435/index.asp>  which mentions the keyboard being suitable for tablet or windows.  No mention of iMac!  although the box is branded to indicate Mac compatable.
    I'm thinking that maybe it just will not pair with an iMac.
    Ill keep looking for the maker website, which might come on later in the future? maybe?
    thanks again.

  • Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac.  Any solutions?

    Since upgrading to OS Mavericks, my iPhone 5 will not pair with my iMac.  Any suggestions please?

    Yes, it did.  I have not had any problem with my iPad pairing, just the iPhone.  Thank you
    Pam

  • Wireless keyboard will not pair with computer. Unable to submit password.

    My wireless keyboard will not pair with the computer. Now I am unable to submit the password in order to access the computer.

    What version of the Mac OS are you running (from "About this Mac" under your Apple menu)?

  • HT4112 I can not get the 2003 Bluetooth wireless keyboard to pair with my ipad.  How do I do this?  According to the information above, this IS possible...

    I can not get the 2003 Bluetooth wireless keyboard to pair with my ipad mini, 32gb wifi.  How do I do this?  According to the information above, this IS possible...

    Never mind...  Didn't see the "not compatible"...  Stupid...  It's bluetooth.  Bluetooth apple should connect to bluetooth apple...  Period...

  • Bluetooth ANYCOM FIPO Pairs with iMac but does not connect

    Bluetooth ANYCOM FIPO Pairs with iMac but does not connect. Have paired and connected iMac to Bluetooth Keyboard, Mouse and a Plantronics Headset without issue. I have a Dell Latitude D620 that paired and connected with the ANYCOM FIPO so I know the device works. It is currently plugged into the iDock port in a Bose SoundDock..
    Bluetooth Device Details.
    Devices (Paired, Favorites, etc):
    FIPO:
    Name: FIPO
    Address: 00-07-88-a0-12-ce
    Type: Headset
    Services:
    Paired: Yes
    Favorite: Yes
    Connected: No
    Apple Bluetooth Software Version: 1.9.0f8
    Hardware Settings:
    Computer:
    Address: 00-14-
    Manufacturer: Cambridge Silicon Radio
    Firmware Version: 3.1965 (3.1965)
    Bluetooth Power: On
    Discoverable: Yes
    HCI Version: 3 ($3)
    HCI Revision: 1965 ($7ad)
    LMP Version: 3 ($3)
    LMP Subversion: 1965 ($7ad)
    Device Type (Major): Computer
    Device Type (Complete): Desktop Computer
    Composite Class Of Device: 1057028 ($102104)
    Device Class (Major): 1 ($1)
    Device Class (Minor): 1 ($1)
    Service Class: 129 ($81)
    Requires Authentication: No

    You may have to enter device code like 000 in phone so it can pair up.
    Try checking the box you mentioned
    Check the manual for your Bluetooth device it will tell you the code Read all of it!!!!!
    Try turning on Bluetooth just as phone is put in search mood.

  • My Apple blue tooth keyboard will not pair with my mac mini

    My Apple wireless keyboard was paired with my Mac Mini. It is no longer paired. I have put in new Batteries. I have pressed the button on the top right hand section of the keyboard, the green led lights up briefly. The Blue Tooth set up assistant appears on screen and searches for the keyboard. I has brifly seen it but does not make a connection. The Magic moose is doing the same thing.

    Hi Darrell,
    If your Apple Bluetooth and keyboard are not paring to your Mac Mini, then take a look at the article below to walk you through some general troubleshooting to get it to pair and start working again. If you have not done so already, try looking form anything could be causing interference like cordless phones as well and thing metal between the keyboard and the Mac Mini.  
    Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/en-us/TS3048
    Let me know if this helps or if you need further assistance,
    -Norm G.

Maybe you are looking for

  • Problem while creating Dimension in AW...

    Hi I m facing error while creating the Dimension in AW. i have done the following steps. 1.I have created the AW name "myfirstaw" and i can see the AW in my DB. 2.I have a DIm table Products. 3.i have attached the AW using below command EXECUTE DBMS_

  • Error while reading USB Port : using JSR80

    Hi Everybody Iam trying to read the data from a usb device [a fingerprint scanner] by using jsr80 with the help of following files which are in my classpath 1) jsr80-1.0.1.jar 2) jsr80_ri-1.0.1.jar 3) jsr80_windows.jar 4) commons-logging-api-1.1.1.ja

  • How do I submit my photo for my podcast page?

    I already submitted my podcast and it was accepted by iTunes. At the time, I didn't have a photo to put up so I skipped that part (thinking I could do it later). Now I can't figure out how to get an image up, and it's all ready (600x600 px). I also d

  • How to do this Export / Import

    Calling all database gurus, I Have database_1 on Windows which has a particular schema / user tables I want to copy to a different database on Linux (which does not have the schema, tables, users), Put simply How do I export the relavent schema/users

  • Mac OS X Update 10.5.6 Installation's process stopped in about 8%

    I have MacBook (intel) with Mac OS X 10.5.1 and i want to install the update. after download Mac OS X 10.5.6 Update Combo,I tried to install it. but the installation's process stopped in about 8%,it wasn't really stop, it said configuring Installatio