Wireless laptops in the domain disconnect and try to re-authenticate
Hi,
I have a wireless setup that is using WLSM in a 6500 switch which is also acting as WDS.
The problem that am encountering is that wireless laptops that are not in the domain are working
perfectly without any issues,they can roam without dropping the wireless LAN connection while
laptops that are joined in the domain are dropping the wireless connection and get stuck while trying
to re-authenticate.
Your help will be highly appreciated.
Thanks,
Sidi
Sidi,
Just a stab in the dark here, but maybe your group policies are effecting your laptops local firewall and blocking something on the WiFi card which cuases them to get bumped off the WiFi.
Connect those laptops hard wired to the domainand force an update using gpupdate /force, after all is done and logged out with group policy, then try the WiFi connection again.
Hope this helps...
Similar Messages
-
Whenever i try to sync my ipod a message keeps coming up saying "1 or more items could not be synced", apparently its error -69. Please help, i've tried rebooting my laptop, installing the latest itunes and turning off the wifi but nothing seems to work.
Are you using security software on your PC? If yes, try to disable the software or check the settings. More info here: http://support.apple.com/kb/TS3125
-
i am trying to unlock my ipod, i have done all the steps, disconnected and held the home button but it keeps saying try again. how do i get it to unlock
Connect the iOS device to your computer and try to make a backup
iOS: How to back up
Then restore via iTunes. The iPod will be erased. Place the iOS device in Recovery Mode if necessary to allow the restore.
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
For how to restore:
iTunes: Restoring iOS software
To restore from backup see:
iOS: How to back up
If you restore from iCloud backup the apps will be automatically downloaded. If you restore from iTunes backup the apps and music have to be in the iTunes library since synced media like apps and music are not included in the backup of the iOS device that iTunes makes.
You can redownload iTunes purchases by: -
I have a user on an iMac 10.6 connected to our domain. She uses Outlook web access for email on our exchange server. Last week she received the following message which is randomly preventing her from sending emails. She claims no attachment was involved in the original email when this all started. I have not been able to look at her account as she is out of the office but maybe someone else dealt with this issue. I realize this may not be Mac related but thought I'd give it a try. She did say it occurred once over two days while working on a PC but it continued over the past weekend.
If an internal user tries to send a message with infected attachment using Outlook Web Access, it may report the following error message: The action could not be completed because of a conflict with the original item. The conflict may have occurred when an existing item was updated on another computer or device. Open the item again and try making your changes. If the problem continues, contact technical support for your organization.
This is because F-Secure Anti-Virus for Microsoft Exchange has detected a virus in the attachment. If the user tries to send the message again, the message will be sent but without the attachment. At the same time a blank message with an attachment named "Attachment_information.txt" will remain in the user's Drafts folder. The "Attachment_information.txt" will contain information about the virus detected in the message.PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!! -
last night while i was sleeping at somone has tried to open my passcode if Iphone 6 plus model A1524. Now i cannot see the passcode screen and it just saysi phone is disable connect to itunes . Then i decided to restore my iphone and i have download almost 4 firmware files (iPhone7,1_8.3_12F70_Restore.ipsw and iPhone7,1_8.0_12A366_Restore.ipsw and iPhone7,1_8.0.1_12A402_Restore.ipsw and fourth one is iPhone7,1_8.2_12D508_Restore.ipsw.part) and restore (by holding shift in itunes and selecting file ) using itunes ( which is current version 12.1.2.27 64 bit) but for everytime two of them(while extracting ) which are (iPhone7,1_8.3_12F70_Restore.ipsw and iPhone7,1_8.2_12D508_Restore.ipsw.part) it says "Iphone "Iphone" could not be restored becuse firmware file was corrupted please disconnect and try again later" .i have tried to download "iPhone7,1_8.3_12F70_Restore.ipsw " manually and via itunes (when i download and restore using itunes it says
"There was a problem downloading the software for the iPhone ''iPhone'' A unknown error occured (9006).
Make sure your networks settings are correct and your network connection is active, or try again.''
but nothing works (While for rest of two it says firmware file is not compatible).. I'm tired of these now as i'm working on this problem for 5 days ...
Please help me as soon as possible..
sorry for my poor english..Hello JD_NINJA,
Thanks for using Apple Support Communities.
Error 9006 when restoring your iOS device indicates that there is security software on your computer which is preventing connection to the Apple server or your device. To troubleshoot this issue please follow the directions below.
Check your security software
Related errors: 2, 4, 6, 9, 1611, 9006. Sometimes security software can stop your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't blocking a connection to the Apple servers.
Get help with iOS update and restore errors - Apple Support
When restoring your iPhone, please make sure to follow the directions in the link below to properly restore.
Restore your device from an iCloud or iTunes backup - Apple Support
Take care,
Alex H. -
I just connected my iPod after opening iTunes to make a playlist and repeatedly have gotten the message that 'iTunes has detected an iPod that might be corrupted." I can either disconnect and try again, which I've done multiple times to no avail, or restore. I don't want to lose the dozens of playlists, so do I have any options that anyone knows of?
Thank you.What iPhone do you have? You can check in settings>>general>> about.
If you have a 3G you cannot update beyond iOS 4.2.1. The 3G is over 4 years old an was discontinued over 2 1/2 years ago. You need the latest ios to run the latest versions of some apps. If you have a 3GS you can update.
If your phone is not responding, reset it by pressing and holding down both the home button ad lock/ sleep button simultaneously until the Apple logo appears. -
My instagram app icon on my iphone 4 is missing. When I go to the app store and try to reinstall it, it says open. When I search for it on my phone it can't find it? What should I do?
Make sure your phone is connected to the computer and iTunes is open
1. Visit Instagram.com from your computer web browser
2. Click "Download in the app store"
3. It will download and show up in your iTunes
4. Highlight and sync the app to your iPhone (note: it will not show up on your phone, even after it says syncing is complete).
5. In iTunes, select the Instagram icon and click "Remove" or "Uninstall"
6. Click Accept and Uninstall when it asks you to confirm as it will remove instagram and its data from your iPhone
7. Disconnect the phone from the computer
8. Manually reboot the phone after exiting all apps
9. Upon re-start, you will be able to access the app in the App Store, and install it -
Hello,
Suddenly the working CRM is being stopped for some group of users.
I drilled down to the issue and have checked that the users from Domain in which CRM is installed are having CRM access.
But for other domain user having problem to access CRM.
I tried to add a user from a domain which is not of CRM domain then it gives following error.
"Business Management Error: You are attempting to create a user with a domain logon that does not exist. Select another domain logon and try again.
<Message>LookupAccountNameW failed with error</Message> "
The change is made - AD group have upgraded Activer Directory server to 2012 R2
Please help as the Production CRM is not working for other domain user.We have Activer Directory Structure like below.
One Root Domain says A
and there are multiple child domain like B,C,D etc...
B,C and D are all in same level,they are child of A domain.
There are two way transitive trusts between A and all the child Domain.
But there is no trust in between B and C and so on.
Our CRM server is in B domain and B domain's user can access CRM but users of Domain C,D and so on can not access CRM.
If this post answers your question, please click "Mark As Answer" on the post and "Mark as Helpful" -
i connected my laptop to the tv and it has worked before. this time only the laptop flashes the blue screen and the tv is saying no signal. when i tried to check the dispaly arrangement it says this:The Arrangement tab of Displays preferences is hidden because you only have a single display attached to this computer.
It is not properly connected to the network.
Make sure location is set correctly
DNS should be on auto (settings - general - network)
Try ethernet
Signal strength on device won't account for issues, you would need a network report from istumbler, netstumbler or similar. This will show accurate signal strength along with noise and nearby networks -
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin:0in;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:10.0pt;
font-family:"Times New Roman","serif";}
Issue:
Cisco firewalls require only one level of password i.e. the domain username and password are used for both logging in as well as reaching global configuration mode.
Background:
We have multiple Cisco network devices set up which authenticate to our Windows domain controller using NPS (Windows 2008 R2). The switches we have set up all function exactly as we would hope as they require your domain username and password to login to the device. They then require a separate password when you use the enable command, this is stored in Active Directory:
Switches:
Username:domain-username
Password:domain-password
SWITCH>enable
Password:enable-password-in-Active-Directory
SWITCH#
Firewalls (as they currently are):
Username:domain-username
Password:domain-password
FIREWALL>enable
Password:domain-password
FIREWALL #
With the firewalls however, they require your domain username and password first, and then your domain password again when using the enable command. I want the firewalls to use the enable level password that the switches currently use instead of the domain password again. The current configuration look like the following:
Current switch configuration:
aaa new-model
aaa authentication login default group radius local
aaa authentication enable default group radius enable
aaa authorization exec default group radius local
aaa session-id common
radius-server host 192.168.0.1 auth-port 1645 acct-port 1646
radius-server source-ports 1645-1646
radius-server key 7 1234abcd
Current firewall configuration:
aaa-server DC01 protocol radius
aaa-server DC01 (outside) host 192.168.0.1
aaa authentication ssh console DC01 LOCAL
aaa authentication enable console DC01 LOCAL
key 1234abcd
Any help would be great, thanks!Cisco ASA works that way by design. You could remove "aaa authentication enable" and then you could use the "enable password" command to set your enable password.
But if you do that, then ASA would change your username to "enable_15". That would break Authorization and Accounting if you're using them. Let me clarify with an example
Firewalls :
Username:domain-username
Password:domain-password
FIREWALL>show curpriv
Username : domain-username
Current privilege level : 1
Current Mode/s : P_UNPR
FIREWALL>enable
Password:enable-password-from-running-config
FIREWALL #show curpriv
Username : enable_15
Current privilege level : 15
Current Mode/s : P_PRIV
If you're using Authorization and Accounting it's recommended to stick with your current behavior. -
How can I make the background one solid color? It is too difficult and noticeable when I use the retouch button and try to erase all the creases in my backdrop. So, how can I have just a solid white background?
When talking about a specific image posting the image may be useful.
One can use a Layer Mask and add a white Layer underneath. -
According to a web and support forum search, myself and another person, Chloe in the Dreamweaver Club forum, have ever reported this. Trying to follow along a Lynda.com tutorial, and the instructor isn't getting this error. Can't imagine why it's happening. I'd be very grateful for any help. I'm also getting an error dialog message:
DIALOG BOX:
While executing onClick in InsertFGDiv.htm, the following JavaScript error(s) occurred:
At line 687 of file "Macintosh HD:Applications:Adobe Dreamweaver CC 2014.1:Configuration:Commands:InsertFGElement.js": The object is not currently contained in a document.
This appears at the top of the screen:
Couldn't commit the changes made in Live View. Refresh the Live View and try editing again. [Refresh doesn't do anything.]Try the suggestions here -
Index to Dreamweaver FAQ
The solution for Javascript errors is likely the one. -
I am having problems saving documents back to SharePoint when any of the document properties (metadata columns) are set to be "managed metadata". The check-in/save fails with error:
The document could not be saved. The server said:
“The operation failed because an unexpected error occurred. (Result code 0×80020005)”
Please ensure you have completed all required properties with the correct information and try again.
I have seen similar threads that suggest this is a known issue with this version of Acrobat but I would like conformation from Adobe that this is a known issue and whether it is fixed in a newer version?
Adobe Acrobat version 10.1.13
SharePoint 2010Hi quodd,,
We are sorry for the issue being faced by you. I need some information from you so that I take further steps:
1. Which Adobe product are you using Acrobat or Adobe reader- what is the complete version?
2. How are you opening and saving the PDF, the exact workflow?
Are you doing it from within Adobe Reader/Acrobat application or opening it from browser, doing changes and saving it using browser itself.
3. Can you try to save a PDF to library with Custom template and managed metadata columns using browser directly.
4. Please verify that columns name do not contain spaces or some other special characters.
Can you try to save PDF to library with Custom template and just a single managed metadata column with a simple name
Thanks,
Nikhil Gupta -
I have just subscribed to iTunes Match, and get the above error message. I have signed out and signed in several times, and still get the same message. Can anyone help with a solution?
I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured. -
Help I just hooked up my iPhone to my laptop for the first time and i accidentally chose to have it read it as my ipod so all my pictures were deleted off of it. I had not backed it up before. Is there anything I can do? Please tell me my photos aren't gone :[
Did you by chance have photo stream turned on? If so then they might be there. When you restored your phone it deleted everything and they will be unretreivable from your computer.
Maybe you are looking for
-
ITS A BLUE SIGN WITH A MUSIC SYMBOL ON IT.
-
i have installed ias on my machine.but i don't know how to deploy my existing forms application in it.There is no adminstration page also for ias.how do i upload my application in ias and how do i administer ias null
-
Newly downloaded images don't create a new project
When I download images from my CF card, they don't show up anywhere in my projects, They only show up in the last download folder. My settings for import are Destination: New Project, Shore files: Aperture library, Rename files: none, No effect prese
-
Dear All, I have two tables with different data bindings, rendering output in one column as comnadLink component On both tables comnadLink components has actionlistener binded to one method on backing bean. For some reason actionListener is not firin
-
IPhone won't sync when any account is logged in iTunes
As the title states, after I restored my iPhone 3G 8gb because it wouldn't sync with my computer I finally narrowed down the problem after many hours of troubleshooting to an account being logged into iTunes when the iPhone is trying to sync. My Desk