Wireless LED doesn;t turn on

i bought my new printer 3 days ago.
Sometime i tried to hold wireless button more than 5 seconds
Now, wireless doesn't work, can not search any wireless, wireless LED on printer doesn't on or blink anymore
I tried to reset printer, turn printer off, hold wireless and cancel button together, turn printer on,
wait until green and red lights blink together, but blue light doesn't work

Don't jack with it. Take it back for an exchange.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Similar Messages

If I turn off Mac Mini Mid2011, LED doesn't turn black.

I turned off the Mac Mini Mid 2011. BUT, the Mac Mini's Light(White LED) doesn't want to turn off and the only way to COMPLETELY shut down is to force shut down.I'm worrying about bad sectors so I'm asking.
Is there any way to solve?

mazwig wrote:
I just want to know if I turn off iMessages and iCloud Back up, and ONLY use SMS myself and my family just SMS's me - and do this on my PHONE ONLY and not touch his ipad (so he doesn't know), if he will get any of my messages I send or receive on his ipad please. Its just a temp thing and I just want to take action myself on my own phone and want to know if this will work. Does anyone know?
SMS messages will not go to the iPad Mini. It's not capable of receving them. If you have access and can do it without it causing a problem, remove your iPhone from the Apple ID Support profile:
Go to: https://supportprofile.apple.com/MySupportProfile.do
Log in if not already logged in.
Click on "Edit Products"
Click on the "X" to the right of the product.
Click "Unregister"
If anyone in your family uses iMessage, they will go to both you and your boyfriend unless you do that.
To be completely safe, you may want to simply use an alternate message app such as Skype, Viber, Whatsapp (assuming everyone has a smartphone) until the issue is resolved. Google Voice will also allow you to send and receive texts to another number on your phone.
Best of luck.

LED doesn't turn on State Machine

Hi!
I just cannot get my head arount this problem. I have state machine VI and would like that LED blink the same way as digital channels are open. On output module the lights are blinking as they should, but I would like also that they blink on front panel of VI.
I have observed data flow (highlited execution) and LED is getting TRUE statment, but it still doesn't blink?
Please help.
See the attached VI. On front panel please insert timings 2, 4, 4, 6, 8, 10.
Thanks in advance!
Have a nice day,
Jure
Attachments:
MaproPopravki.vi ‏644 KB

The only LED I see on your front panel is the one called "Polozaj 1", and I never see a True written to it. The tunnel that feeds data to it is set to "Use Default If Unwired", and nothing is connected to it in any of the cases. Thus, it always outputs a False.
Your code raises a number of questions. It's very sloppy, for one thing. It's extremely difficult to follow wires. The ANDing of Booleans with True/False constants is pointless. ANDing anything with False ALWAYS produces False. ANDing with True ALWAYS returns the value of the other Boolean. Thus, I don't see what you are trying to do there. Do not use numbers for state names. Someone else looking at the code will have no idea what the states are supposed to do. Use names for the states instead. Create a typedef for you enumeration. I can see one red dot, which indicates that at least one of the enumeration constants doesn't match another. This will lead to errors.

Flex 2: stuck in sleep/battery led doesn't turn on

Hi Everybody,
My laptop no longer will turn on and was wondering if anyone had this experience in the past.
With all my materials on it, I hesistate to ship it out for 3 weeks.
Please advise.

Hello i've had my Flex 2 14 for just over 2 months, i stopped using it one evening and it went into sleep mode. The next day coming back to turn it on the power light is flashing like its in sleep mode but it won't turn on. Unplugging the charger stops the flashing but when i press the power button again it resumes flashing and won't respond to any of my attempts to turn it on. The battery is sealed inside so i can't remove it and try that method to get it to wake up. i've also done the tried and tested press and hold the button and scrolling on the mousepad but nothing wakes it up. Does anyone know what can cause this problem and if anyone has any ideas on how to fix this issue please let me know. i'd greatly appreciate any and all suggestions. Thank you for your time in advance .

Display replaced...but iSight led doesn't work

I've a Macbook Pro (June '07) on which i've totally repleaced the display. They (the apple support) have mounted the new MacBook Pro display (Feb '08), that is as the old one, but with only one difference: http://nobi.com/nobilog/archives/001795.html
Now if i use my integrated iSight the green led doesn't turn on. Is this an internal cable-connection issue or does the led work just with the new MacBook Pros?

Hello Marco
Try the suggestions in Apple's How to Troubleshoot iSight.
Regardless of whether you can see a green led, if your built-in iSight does not work (meaning you can see a picture from your iSight) with any app in any user account, the repair job is not finished. Contact the people who worked on your Mac and ask them to correct the problem or credit you for what you paid for the part of the work that was not completed.
If your iSight works but you cannot see the green LED, you can decide whether a return trip to get the led working is worthwhile to you. I probably wouldn't bother, but you might want to have it made right. The most meaningful reason I can imagine to take it back ONLY for an LED fix is that a working LED might be important to someone to whom you consider selling your Mac at some future time.
EZ Jim
PowerBook 1.67 GHz w/Mac OS X (10.4.11) G5 DP 1.8 w/Mac OS X (10.5.2) External iSight

My Macbook Pro Retina doesn't turn on but charger led works

I haven't used my mac for a month but it use to work perfectly fine. I tried to use it but it wouldn't turn on. When i plug the magsafe connecter the led goes orange. But when i press the power button it doesn't turn on. i tried smc reset using left shift, control and option (and power button) while charging and not charging but it doesn't work. Please help.

IF the battery was completely discharged, give it some time on the charger before trying to start up. The amber LED means it is charging, give it an hour or so before trying again.

The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't work. All software is updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

2007 wireless keyboard led doesn't display

I have a 2007 wireless keyboard that the green LED doesn't display. I just replaced the batteries with new ones and the LED still doesn't display after pressing the on button, so I replaced the batteries with another set of 3 brand new batteries. Still no LED.
The batteries are installed correctly, all positive in same direction, all pointing in.
Is there a reset button, or is it possible that a keyboard can die?
There is no visible sign of abuse or being dropped at all. Can an older keyboard like this be repaired?
Thanks,
Steven

Also I'm not sure where the LED is located in the keyboard. On the trackpad it's in the right top part of the round part where the batteries go into. I assumed the keyboard might be the same.
Oh. that led! I was thinking it was a keyboard that had a led in a key, for example my Tactile Pro keyboard has a light in the caps lock key. If it's the led indicating a bluetooth connection attempt like the one on the trackpad and magic mouse, then forget it, there's no way you can repair that own your own. And I don't think even apple would either since it is far cheapr and simpler to just replace the device.

Satellite S45-ASP4310SL doesn't turn on, after pressing the power button, a LED blink

Mi laptop Toshiba Satellite doesn't turn on anymore, THIS MODEL DOESN'T ALLOW ME TO REMOVE THE BATTERY, everytime I lift my finger from the power button the white LED light blinks, I've tried pressing for 30 seconds and a bit more and doesn't works, I've been using this laptop for more than a year, 2 days ago I leave it charging while gaming and go to the bathroom, when I head back, it was turned off and doesn't charge neither.
Please help me, and excuse me for my bad English

Hello.
Do you have any security passwords set for your hard drives?
There was a user that reported a similar problem with his machine a couple of weeks
ago, and it turned out to be tied to the HD password he had set. When he turned the
password off, the machine booted normally.
ThinkPad W540 (20BG) - i7-4800MQ/24GB // ThinkPad T440s (20AQ) - i7-4600U/12GB
ThinkPad T440p (20AW) - i7-4800MQ/16GB // ThinkPad Helix (3698-6EU) - i5-3337U/4GB
ThinkPad W520 (4282-W4Q) - i7-2720QM/32GB // ThinkPad T400 (2767-W1C) - P9500/8GB
ThinkPad T61 (7665-CTO) - T7700/4GB // ThinkPad T60p (8741-C2G) - T7400/4GB

Power & Wireless LEDs turn off on WRT54GX2

Over the past week, this has happened 6 times: the power and wireless LEDs turn off, the ethernet(1) and internet LEDs flicker like mad. While it's like that, all LAN and WAN traffic is disabled. It is connected to a DSL modem and the LEDs there appear normal. If I cycle power on the router, it returns to normal. I have not yet connected this behavior to any special events on my LAN. Does anyone have a suggestion?

You should Upgrade your router's firmware...
Download Firmware 3.70 MB...Firmware Ver.1.01.22...
Follow these steps to upgrade the firmware on the device : -
Open an Internet Explorer browser page on a computer hard wired to the router...
In the address bar type - 192.168.1.1...Leave the Username blank & in Password use admin in lower case...
Click on the 'Administration' tab- Then click on the 'Firmware Upgrade' sub tab- Here click on 'Browse' and browse the .bin firmware file and click on "Upgrade"...
Wait for few seconds until it shows that "Upgrade is successful" After the firmware upgrade, click on "Reboot" and you will be returned back to the same page OR it will say "Page cannot be displayed".
Now reset your router :
Press and hold the reset button for 30 seconds...Release the reset button...Unplug the power cable from your router, wait for 30 seconds and re-connect the power cable...Now re-configure your router...
If your Internet Service Providor is Cable follow this link
If your Internet Service Providor is DSL follow this link

Apple Wireless Keyboard Caps Lock light doesn't turn off

Hello
Recently the caps lock button light doesn't turn off on my apple wireless keyboard. Anybody know how to turn it off. Every time i press a key, the light dims a little, but when not pressed, its fully on. I tried resetting it, taking the batteries off, unpairing it. But nothing =(
hmmm

This doesn't turn off your light, but you should check out CapSee on Apple's downloads page. (www.apple.com/downloads/macosx/systemdiskutilities/capsee.html) It puts a notification pane (or bezel) on the screen letting you know when you turn caps lock on and off. Looks just like the volume and brightness bezels. Very slick, and it's free.

Star Trails doesn't turn off view screen LED

When using Star Trails on my A-6000, I would like to turn off the LED view screen to save power and eliminate some light pollution. The Star Trails instructions give a clear set of steps to do this. These steps move the display to the view finder - ok, but insufficient. The LED continues to operate, heat the sensor, increase the noise, and burn the very limited battery.
If I place a piece of sticky paper over the eyepiece, the LED does actually turn off.
Any chance of an automated software controlled stickey paper? Thanks

You can force a power-off by holding the power button down for 7 to 10 seconds. If it reoccures post back for instructions on debugging it.

MacBook Pro suddenly doesn't turn on.

My MBP suddenly stopped working.
It was sleeping and when I decided to use it, it doesn't turn on at all.
The charger's LED indicator doesn't work either, or any of the lights in the computer.
I don't know if a SMC reset can help fix it? Help..?

gabyy1026 wrote:
I don't know if a SMC reset can help fix it? Help..?
The only way you will know if you do it! If it doesn't work, then post back.

Macbook Pro 2009 doesn't turn on without battery

Hi. I have a mbp mid 15" mid 2009 2.66. In time the battery bacame very low like 4% health, and now is completely dead or broken. When i check the battery status leds it shows full and when I try to turn on the computer (of course with AC power) it tries to turn on for 1 sec then it dies, even with AC plug. i hear the fans trying to spin for 1 sec or less, i hear the hdd sound and i see the standby led like it is trying to power on normally but It seems like it's trying to use the battery to power on. (Even when the battery was good, it would't turn on if it was 0%.. i would have to wait 10-20min or whatever to charge it to aprox20% or whatever).
I can't buy a new battery right now so I tried to turn it on without battery (I am sure the battery is completely dead and if I put a new battery it will work for sure) but why it doesn't turn on without battery?? I don't believe it needs battery to run on AC power. It's a SMC thing. What can i do to use the SMC and run the computer wihout battery? Now I'm using it with SMC bypass (keep pushing power for 10 sec and plug the ac chord) but with SMC bybass the fans run at max speed, no keyboard backlight no sensors and all that uses smc its not working. Is it safe to use it that way? (it's not running slower, i don't have performance issues).
I tried PRAM reset SMC reset, removing battery with AC on.. nothing works. It won't turn on without battery. Only with smc bybass.
It is something i can do? or buying a new battery is the only solution?
Thanks.

You have a hardware problem. More than likely it is the cable that goes from the logic board to the display. It sounds like an internmitent short. Works sometimes not at other times.
The only way to fix a hardware problem is to replace the faulty piece of hardware and the only people that do that is either an Apple store or an Apple authorized repair center. That is unless you can diagnose the actual failed hardware part, find one from an Aftermarket Mac parts seller and replace the part yourself.

TS2570 my mac doesn't turn on??? even it is charged

my mac pro 13 doesn't turn on ??
when i press the power button it just on the led light but laptop doesn't turn on. though the charger is connected..

Hello, not too much you can try, might be the charger gone out?
Intel-based Macs: Resetting the System Management Controller (SMC)...
http://support.apple.com/kb/HT3964

Wireless LED doesn;t turn on

Similar Messages

Maybe you are looking for