Wireless MAC filter can not be active to connect to WIFI?

I use a Linksys router with WEP security and a Wireless MAC filter. When I turned off WEP I was unable to connect to the router with my iphone 3g but when I enabled WEP and turned off the MAC filter I connected right away.
Has anybody else seen this or has anyone successfully connected to a router with a MAC filter?
Thanks

I have no problems connecting to a router with MAC filtering enabled... I would just double check that you entered the correct MAC address into your router (Settings>General>About>Wi-Fi Address) and make sure the permissions are set correctly for that MAC address (if applicable)...

Similar Messages

  • Problem with connetction to wrt54g2 via wireless connection with WPA/WPA2 & wireless MAC filter

    Hello,
    I'm Alexey from Novosibirsk, Russia.
    I have a problem with connection to wrt54g2 from my DELL D630 notebook via wireless connection. When I setup WPA/WPA2 in wireless security and wireless MAC filter I can't connect from notebook to WRT - in Windows I see that dynamic IP address from WRT is not assigned. When I switch off security mode to disable always OK, but I need a wireless security between DELL and WRT.
    Connection via cable Ethernet port is OK.
    Can You help me?

    Have you tried the different laptop...?
    Download 1.71 MB the firmware for WRT54G2 v1 and reflash the router's firmware.After reflashing/upgrading the router's firmware,reset the router for 30 seconds and reconfigure the router from scratch. 

  • Mac mini can not find the NAS

    In my network I have a Mac mini, AirPort Extreme base station and a Netgear ReadyNAS Duo v2. Everything is connected by cable. The problem is that the Mac mini can not find the NAS. Mac mini is looking for wirelessly connected devices, type TimeCapsule. How do I get my Mac mini to find the NAS and set the NAS as a source of data storage?

    I have a ReadyNAS and use it as a Time Machine destination with no problems, even over WiFi. The ReadyNAS and Mac are both on the same LAN (even though the Mac is on WiFi), please check to see if your WiFi is on a different LAN to the Ethernet side of things, I have my Airport set to bridging mode so both sides of the AirPort count as the same LAN.
    Next you need to check you have actually configured Time Machine in the ReadyNAS, as shipped it is initially turned off. You need to go to the ReadyNAS web management interface (FrontView) and then click on Backup on the left, and then select Time Machine. You also need to make sure Bonjour is enabled for the ReadyNAS, this is accessed by clicking on Services on the left and then selecting Discovery Services, make sure all the Bonjour options are ticked on.

  • Have to disable Wireless MAC filter to see other computers

    I have two Windows 7 machines connected by wireless-N to my WAG160N. I frequently find that, although both computers can see the network, they can't see each other. I can temporarily solve this problem by disabling, and then re-enabling, the Wireless MAC filter. Any suggestions welcome
    Solved!
    Go to Solution.

    Unfortunately just leaving MAC filtering off doesn't help. I have to turn it off and then it on again every time. As soon as I turn it on again the other computer becomes visible. Here are my settings:
    Encapsulation: RFC 2364 PPPoA
    Multiplexing: VC
    QoS Type: UBR
    Autodetect: Sisable
    Virtual Circuit: 8 VPI, 48 VCI
    DSL Molulation: Multimode
    DHCP Server: Enable
    DDNS Service: Disable
    MAC Address Clone: Disable
    NAT: Enable
    RIP: Disable
    Wireless Configuration: Manual
    Network Mode: Mixed
    Radio Band: Standard - 20 MhZ Channel
    Wide Channel: 4
    Standard Channel 11-2.462 GHz
    SSID Broadcast: Enable
    Security Mode: WPA2-Personal
    Encription: TKIP or AES
    Pre-Shared key: <something long>
    Key renewal: 3600 seconds
    AP isolation: Disable
    SPI Firewall Protection: Enable
    Filters: nothing checked
    Blok WAN Requests: Block Anonymous Internet Requests
    UPnP: Enable
    Management via WLAN: Enable
    IGMP Proxy: Disable
    Firmware Version: V1.00.15

  • HT1937 Hi few days ago I bought a second hand iphone 5 white 64 gb, and when I try to activate it I see the following message: "This iPhone can not be activated for service.please contact your carrier or AppleCare"

    Hi few days ago I bought a second hand iphone 5 white 64 gb, and when I try to activate it I see the following message: "This iPhone can not be activated for service.please contact your carrier or AppleCare"

    So then do what it says...contact Apple or your wireless carrier.
    However your phone is probably locked to another carrier and cannot be used on yours.

  • I have an Airport Extreme wireless router & I can not connect my Kindle.

    I have an Airport Extreme wireless router & I can not connect my Kindle.  Also, my password will not work when a visitor uses it for a laptop (even a Mac) or any other device that uses the internet.  It says the password is incorrect.  I easily connected a Kindle last year, but I got a new one & now I can not connect wirelessly.  I see no tab to create a guest network.  I do not mind giving my password to visitors, but that does not work.

    If you temporarily disable wireless encryption on your 802.11n AirPort Extreme Base Station (AEBSn), can the Kindle connect to the router and gain access to the Internet now? If so, then I would suggest that you reconfigure the AEBSn to use "WPA2 Personal" for the Wireless Security setting, and then, try connecting with the Kindle again.
    As far as establishing a Guest Network, the AEBSn must not be in bridge mode. That is, it should be the only router in your current network and directly conncted to the Internet modem. If it is, then you would find the Guest Networking option on the AirPort > Guest Networking tab:

  • Interface Manager Material Transaction can not be activated

    Hi hussein,
    One of the interface managers for INVENTORY module can not be activated.
    I tried to activated it using:
    Navigation: INVENTORY > Setup >Transactions > Interface Managers > Material Transactions
    Goto Tools > Launch Manager > Submit Conc. program "Process Transaction Inferface"
    Then after the job is completed, I checked the manager but it is still "inactive" status. :(
    Its log says:
    +---------------------------------------------------------------------------+
    Inventory: Version : 11.5.0 - Development
    Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
    INCTCM module: Process transaction interface
    +---------------------------------------------------------------------------+
    Current system time is 07-DEC-2009 14:57:19
    +---------------------------------------------------------------------------+
    +---------------------------------------------------------------------------+
    Executing request completion options...
    Output is not being printed because:
    The print option has been disabled for this report.
    +------------- 1) PRINT   -------------+
    +--------------------------------------+
    Finished executing request completion options.
    +---------------------------------------------------------------------------+
    Concurrent request completed successfully
    Current system time is 07-DEC-2009 14:57:21
    +---------------------------------------------------------------------------+Please help.....
    Thanks a lot
    msk

    Hi yxes;
    Navigation: INVENTORY > Setup >Transactions > Interface Managers > Material Transactions
    Goto Tools > Launch Manager > Submit Conc. program "Process Transaction Inferface" Related Cm is Up? If yes please follow below and see its helpful:
    The print option has been disabled for this report.
    Regard
    Helios

  • HT1203 i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    i have tried this 6+ times to "How to share music between different accounts on a single computer" on my wifes mac and can not get it to work!! On my PC no problem but on the MAC it will not work, follow the instructions to the T but no go????

    It is almost as if the program does not exist on my computer. If I search for it, the only thing that comes up is the installer. I cannot find it anywhere despite the fact I have installed it numerous times, uninstalled it and conducted a fresh install, and the Adobe website checks says that it is installed.

  • HT4623 Dear AppleCare,  My iPhone 5 was bought with full price in the USA from Sprint, and I was told that it is a global phone.  But when I am back in China  using local carrier,  Can not be activated

    >
    >>Dear AppleCare，
    >>My iPhone 5 was bought with full price in the USA from Sprint, and I was told that it is a global phone.
    >>But when I am back in China  using local carrier,  Can not be activated
    >>I can't believe that !
    >>>Details:
    >>>SN:F1*******8GL
    <Personal Information Edited by Host>

    Sorry to tell you this but this is not AppleCare.
    This is a forum of users just like yourself who do their best to help other users.
    We are not able to help you with your problem

  • HT204053 why is my phone number can not be activated for iMessage?

    why is my phone number can not be activated for iMessage?

    Got this from another post.  General>settings>network>reset.  Then try.  Worked for me.  Good luck!

  • Hello! i am new to Macbook pro, i have recently transferred my data from my Pc to Mac, i can not open .exe file. Please give me any suggestion regarding this!

    hello! i am new to Macbook pro, i have recently transferred my data from my Pc to Mac, i can not open .exe file. Please give me any suggestion regarding this!
    I have using Mac OS 10.9.2

    Try running it through WineSkin or CrossOver Mac, or installing Windows through VirtualBox, Parallels Desktop, VMware Fusion, Boot Camp, or similar software.
    (106527)

  • I can download and view PDF docs on my MAC but can not save or print them - Help !

    I can download and view PDF docs on my MAC but can not save or print them - Help !

  • HT1267 I have a factory unlocked Iphone 4S, it worked fine but it was lossing the signal and going into search, I decided to restore, but now can not activate it, a message can not be activated because the server is temporary unavailable try again later??

    I have a factory unlocked Iphone 4S, it worked fine but it was often lossing  signal and going into search, I decided to restore, but now can not activate it, a message can not be activated because the server is temporary unavailable try again later, I have tried this for 3 days, any suggestions?

    yes did you buy it of somebody or a well known company such as apple or carphone warehouse?
    and i mean the phone would have been activated in the first place with the sim card you get given when you first get the phone.
    trying to activate the phone with another sim card that you did not get when you brought the phone may result in you not being able to activate it
    no worries

  • I tried upgrading my Ipad to IOS 4.3 and now i get a message that my ipad can not be activated. HELP!

    I recently tried to upgrade the software on my Ipad to IOS 4.3 (in order to get Google Earth and now I get this message:"  Your Ipad can not be activated because the activiation server is temporarily unavailable. Try connecting your Ipad to ITunes [i did] to activate it or try again [i did sever times] in a couple of minutes. If this problem persists, contact Apple Support at apple.com/support"

    You can only update to the current iOS 5.1.1.
    iOS 5: Updating your device to iOS 5
    http://support.apple.com/kb/HT4972
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect to your computer & click on the "Update your device using iTunes".
    Tip - You may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. After you update to iOS 5.x, the next update can be installed via wifi (i.e., not connected to your computer).
     Cheers, Tom

  • HT4623 why my ipphone can not be activated when I updated to IS06? My iphone is 3gs and original locked but now it's offical unlocked before i updated to ISO6

    why my iphone can not be activated when I updated to IS06?
    My iphone is 3gs 8g, and original locked but now it's offical unlocked before i updated to ISO6.
    iphone information:
    iphone 3gs
    Model：MC640LL
    SN：84xxxxEDG
    <Edited By Host>

    That means your phone is now a brick. Congratulations.
    That's a risk you take when you decide to hack the phone.
    You can't get any help here. Discussing hacked and jailbroken devices is forbidden by the terms of service.
    Maybe you can find something on google that will help you.

Maybe you are looking for

  • ICloud files unable to be viewed or downloaded

    I uploaded both pages and keynote files to iCloud from my Imac and Macbook pro they show up like this.  They are able to be duplicated or deleted but not downloaded. Just started this week and has never happened before that I recall.  I've tried dele

  • A simple problem to solve... I hope.

    $A simple problem to solve... I hope. Hi Guys, This is my first post on this forum, and I'm hoping that the problem I'm encountering at the moment is down to my own stupidity rather than technical issues. Firstly, I should mention that I have used my

  • How to find path for an OA page

    Dear All, I need to modify a seeded page in OA fmwk. for which I am unable to get its physical location in the directory structure for its CO and related java and class files. This page is regarding the Purchase Order . Also when I navigate to this p

  • [Solved] Can't upgrade system - cups related problem

    Hi, I can't upgrade (pacman -Syu) my system due some cups related problems. AS you can see, although the problem seems to be cups related, none of the other packages has been upgarded as well. Please advise.:mad: Thanks, Michael Badt Here's a copy of

  • Can't access pictures on my tablet

    App keeps telling me to reset privacy settings??  What privacy settings?