Wireless mac key board won't function

I Spilled water in my iMac wireless keyboard. It won't function. Can it be repaired?
I Have replaced the batteries. No help. Suggestions? Or do I need to replace it?

I suggest you replace it. Liquids almost certainly damage a KB and repairing it is not an option.
Barry

Similar Messages

  • Problems with the latest MAC wireless key Board board

    I recently purchased the most recent wireless MAC keyboard and it worked great for a whle and now I am having problems.
    The ALT key will not give me the @ symbol have to get it from the special characters menu, instead I get ™, have tried new batteries, resetting nothing seems to help. I have not downloaded Mountain Lion.
    Any suggestions

    It sounds like your input language might have been changed. Open your Langage & Text control panel and make sure it is set appropriately under "input sources".

  • My Mac wireless keyboard and mouse won't reconnect

    My Mac wireless keyboard and and mouse one day disconnected and I can't  reconnect. They have new batteries.

    Hi Saint Anne,
    Happy Thanksgiving Day!  Since both of your wireless input devices are not working at the moment, do you have a wired mouse you can use to straighten this out?  Here are some troubleshooting steps to try:
    Wireless Connection issue
    Make sure Bluetooth is turned on
    First, choose Apple () menu > System Preferences > Bluetooth and confirm that Bluetooth is turned ON.
    The Bluetooth menu bar icon should turn:
    Black if Bluetooth is turned ON and no devices are connected.
    Light grey with three dots if Bluetooth is ON and at least one wireless device is connected.
    Light grey (or disappear completely) if Bluetooth is turned OFF, or if the iMac is unable to communicate with the Bluetooth module.
    Refer to the Bluetooth Menu Icon table below for more information on determining the Bluetooth status. If the Bluetooth icon does not appear, or if the menu bar status continues to indicate that Bluetooth is off, restart your computer and then attempt to turn Bluetooth ON again.
    Bluetooth OFF
    Bluetooth ON and connected to wireless device
    Bluetooth menu icon
    Bluetooth status
    Bluetooth turned on, but there are no devices connected to the Mac. See the "Make sure the wireless mouse or keyboard is turned on" section of this article.
    Bluetooth turned on and at least one wireless device is connected.  See the "Make sure the wireless mouse or keyboard is turned on" section of this article.
    When this icon flashes, at least one wireless device has a low battery. Click the Bluetooth icon to identify the affected device, then replace the batteries.
    Bluetooth is off. Click the Bluetooth icon using a USB mouse and select "Turn Bluetooth On". Note: Mac OS X won’t allow Bluetooth to be turned off unless a USB mouse is connected.
    Bluetooth offline. Restart your Mac. If the Bluetooth status doesn’t change, disconnect all USB devices and restart your Mac again.
    Make sure the wireless mouse and keyboard are turned on.
    Mouse
    Slide the On/Off switch on the bottom of your mouse to turn it on. Note: If the battery compartment cover is not installed properly the On/Off switch may not function correctly or may be difficult to operate. Remove the battery compartment cover and carefully reinstall it.
    When your mouse is on and paired, and the batteries are charged, the indicator light glows steadily.
    If your mouse isn’t paired with a Mac, the indicator light will blink, indicating your mouse is in discovery mode and ready to pair.
    If the indicator light doesn't illuminate, check to make sure you have two good batteries and that they're installed correctly. 
    Keyboard
    Push and release the On/Off switch to turn on the Apple Wireless Keyboard.
    When your keyboard is on and paired, and the batteries are charged, the light will glow steadily for several seconds, then turn off.
    If your wireless keyboard isn’t paired with your Mac, the indicator light will begin to blink. This indicates your keyboard is in discovery mode and ready to pair with your Mac.
    If the LED doesn't light up, remove the batteries to make sure they're good and that they're installed correctly. 
    Check preferences
    From the Apple () menu, choose System Preferences, then choose Bluetooth from the View menu. The Bluetooth preferences pane will list the Bluetooth devices paired with the computer, the status of the devices (paired or connected), and whether Bluetooth power is on or not.
    Click the gear icon and choose "Connect" to connect a device that is powered on.
    To set up a new device, click the + icon and follow the Bluetooth setup assistant.
    If the Mouse System Preferences pane is open and no wired or wireless mouse is connected, your Mac will immediately start looking for a wireless mouse (with Mac OS X v10.6.  For Mac OS X v10.5, the Setup Assistant should open).
    Keyboard or mouse intermittently stops responding
    Click the mouse
    Click the mouse once to reconnect it with your Mac. It may take a moment for the mouse to respond.
    Check the battery level of the mouse. Choose System Preferences from the Apple (), then choose Mouse from the View menu. The battery level indicator is in the lower-left corner. Replace the batteries if they are low.  Note: Choose Keyboard & Mouse from the View menu with Mac OS X v10.5.  For more information on keyboard and mouse battery levels in Mac OS X v10.5, see Desktop computers: Troubleshooting wireless keyboard and mouse issues.
    Press a key on the keyboard 
    Press a key on the keyboard to reconnect it with your Mac. It may take a moment for the keyboard to respond.
    Check the battery level of the keyboard. Choose System Preferences from the Apple (),  then choose Keyboard from the View menu and select the Keyboard tab. The battery level indicator is in the lower-left corner. Replace the batteries if they are low.
    Check for signal interference
    Wireless networks that operate on 2.4GHz may cause interference.
    Move cordless phone base stations, microwave ovens, and other 2.4GHz electrical devices away from the Mac if you suspect interference.
    Keep wireless devices within 10 meters (33 feet) of the Mac.
    Avoid putting metal objects between the device and the Mac.
    Mouse doesn't scroll up or down or side to side
    For mice that have a scroll ball, refer to How to clean your Mighty Mouse.
    Check the Scrolling speed slide-control at the top, and make sure the “Scroll” checkbox is checked.
    For scrolling side-to-side, make sure the application you’re using supports side-to-side scrolling.
    Remember, scrolling is done with one finger, and navigating is done by swiping side-to-side with two fingers.
    Navigating moves from page to page in a document or internet browser unlike scrolling.
    Mouse does not track as expected (jittery, jumpy, slow, fast).
    The Apple Wireless Mouse can be used on most smooth surfaces, however if tracking issues occur try these options:
    Choose System Preferences from the Apple () menu, then choose Mouse from the View menu. Set the Tracking slider to adjust how fast the pointer moves as you move the mouse.
    Try using a different surface to see if the tracking improves.
    Turn the mouse over and inspect the sensor window. Use compressed air to gently clean the sensor window if dust or debris is present.
    If multiple Bluetooth wireless devices are in use nearby, try turning them off one at a time to see if the issue improves. Bandwidth intensive devices could affect tracking.
    Mouse buttons do not work as expected.
    The Mouse preference pane allows users to customize the mouse features to meet their needs.
    Choose System Preferences from the Apple () menu, then choose Mouse from the View menu. Set the Tracking slider to adjust how fast the pointer moves as you move the mouse.
    Try using a different surface to see if the tracking improves.
    Turn the mouse over and inspect the sensor window. Use compressed air to gently clean the sensor window if dust or debris is present.
    If multiple Bluetooth wireless devices are in use nearby, try turning them off one at a time to see if the issue improves. Bandwidth intensive devices could affect tracking.
    Keyboard has one or more keys that do not respond. 
    Use the Keyboard Viewer to test whether the keyboard keys are responding correctly when they are pressed.
    Choose System Preferences from the Apple () menu, then choose Language & Textfrom the View menu (or International from the View menu in Mac OS X v10.5 or earlier).
    Select Input Sources.
    Select the Keyboard & Character Viewer checkbox.
    Enable the input source for the keyboard layout you are testing by selecting the checkbox next to it.
    Make sure that "Show Input menu in menu bar" is enabled.
    Choose Show Keyboard Viewer from the Input menu in the menu bar, as shown.  
    The Keyboard Viewer shows the keyboard layout.
    Type the key on the keyboard that doesn’t respond and observe whether the corresponding key highlights on the Keyboard Viewer. If it does, that particular key is functioning correctly. In the sample shown above the shift and command keys are being pressed.
    If the mouse keys feature in the Universal Access System Preferences pane is enabled, many of the keyboard keys may not respond as expected.
    Try starting up into single user mode to determine whether a software issue is causing the issue.
    Cheers,
    Judy

  • Assigned F key to play an action does not work. Why? Using cs6  iMac and wireless key board

    Assigned F key to play an action does not work to play the action on an image. When the F key is selected it seams to control computer attributes rather than the play action assigned in photoshop. Why? Using cs6  iMac and wireless key board.
    Is this a possible preference setting in mac or is it a setting in cs6 photoshop ? Help and knowledge will be appreciated.

    *** Moderator Action ***
    This networking question has been moved from the Solaris 10 discussion space,
    to the Solaris Networking discussion space, for closer topic alignment.
    Whereas there may be IPV6 nuances specific to your Solaris 10 environment and to the hardware, this appears to be a discussion that may be more global in effect.

  • Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this a factor?

    Installed new hard drive in imac and i get folder with question mark, put in OS install disk and it does nothing? All I have is wireless key board and mouse, is this an issue?

    Other than put disc in you don't give much info about what you've done. With the install disc inserted restart your Mac while holding the C key, that should start it up from the install disc. Should also work fine with a wireless Apple keyboard.

  • My Macbook air 2011, one line of key board (a to l) do not respond, but when an external keyboard is hooked up these keys starts functioning as normal, after disconnecting the external key board (from the USB) the problem comes back...Please help. Thank y

    My Macbook air 2011- key board (a-l) do not respond, but when you hook up an external key board to the usb these keys on the computer also starts functioning as normal and when you disconnect the external key, these keys stops functioning...?

    Perform SMC reset
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • I have a power mac g3 it boots fine but mouse and key board do not work

    The mac boots fine, I can see desk top, etc. The key board and mouse are connected but do not appear to work.  This has just happened.

    You could take it to a service center but: 1) It would probably cost more than the computer is worth. 2) You'd be lucky to find somebody who knows what a G4 is (maybe I exaggerate but really, they would laiugh at anything that "old"). 3) I don't think we're done here.
    Do you still have the original discs. One of them has a hardware test that you can run.  You could also see
    if it boots to the original disc and if things still won't work.  You could even try OS9.
    Also look into CUDA reset and NVRAM reset.  I think they are both references in the link I provided earlier.
    [X-Lab: The Apple Hardware Test|http://www.thexlab.com/faqs/aht.html]
    [Apple's AHT support|http://www.info.apple.com/support/aht.html] - Apple Hardware Test Images and Information (for pre-Intel Macs)
    Here's the list and downloads for AHT if you have an old G4...
    http://www.info.apple.com/support/aht.html
    If it really turns out to be the USB hardware that's bad you could probably find a third party USB card you could slip in there for next to nothing and would also give you USB2 speeds.  There's minor disadvantages.
    Oh, did we determine if it really isn't working at any stage?  What about if you hold down the mouse key while booting the computer? That should open the optical drive door if it is being sensed.

  • How do I pair an apple key board to a brand new mac mini?

    How do I pair an apple key board to a brand new mac mini?

    Have you tried a wired keyboard to turn on the BT system?  Macs can require some special key-combinations that *must* be seen before the OS starts and BT sometimes does not activate before the OS.

  • Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

    Hey! recently my key board settings has changed and now my volume buttons are no longer F10 and F11, now if i want to change the volume i have to do it on the top bar of the screen! how do i change it back to work normally on my wireless keyboard?

    Hi, did you upgrade the OS lately?
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php

  • My Mac book pro won't print to canon IR-ADV C5035 wirelessly but my I pad will

    My Mac book pro won't print to canon IR-ADV C5035 wirelessly but my I pad will

    It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
    Please describe in detail all you have attempted to do in order to resolve the issue.  Contacted Canon's tech support for instance?

  • My Wireless mac keypad has stopped properly working. The keys sometime do not correspond to the result, or a a simultaneous duel actio, for example when the delete button is pressed the. Ursor does go backwards, but it also turns the sound up. Any ideas?

    My Wireless mac keypad has stopped properly working. The keys sometime do not correspond to the result, or a a simultaneous duel actio, for example when the delete button is pressed the. Ursor does go backwards, but it also turns the sound up. The keyboard is properly connected to the computer, and the battery life is up in the nineties.
    Help please !!!!

    Hi, thankyou for your response. Can I just confirm that you mean turning the computer on and off again, or re-booting the whole system. If it is the first I have already turned the system on and off, with no luck.
    Regards

  • Does wireless Key board Model # A1016 work with the Macbook air?

    I have an old Apple wirless key board Model # A1016, I am trying to pair it with my Macbook air. Doesn't seem to be working, does anyone know if it is even compatible or not?

    My understanding is that the BWI uses an 802.11b wireless standard that is perfectly compatible with the built-in reception that the MBA has.
    Is there anything that would lead you to doubt the compatibility?

  • Where can I find commands for wireless key board with my Ipad?

    how do I find a command list for using my apple wireless key board with my Ipad?

    you will have to power off the wireless keyboard...or go into your settings and turn off the bluetooth when you aren't using it.
    the default for hte ipad is to only have one keyboard at a time. And if your ipad senses a blue tooth attached, your onscreen one will not be visible.

  • How to restrict key board function keys ex:-F10 in forms 6i.urgent plz..

    how to restrict key board function keys ex:-F10 in forms 6i.urgent plz..

    Hi,
    At Form level, write trigger for WHEN_KEY_DOWN, check for F10 and put action as NULL.
    Regards,
    Amol

  • The 5 keys (qwert) on a Mac book key board are inoperative, what is the fix

    The 5 keys (qwert) on a Mac Book key board are inoperative, OS10.6.8.  What is the fix?

    This may help:
    http://docs.info.apple.com/article.html?path=Keynote/5.0/en/kyntc6568cef.html
    http://support.apple.com/kb/HT1343
    Ciao.

Maybe you are looking for

  • How to change the title of a block/form/table in the WebIC CRM 2007 ?

    Hi, We want to change the title of a block in the work area for example from 'Account details' to 'Partner details'. After investigation we think that we have to change the text in SOTR_EDIT transaction by editing the Alias or defining a new one with

  • Problems with sound in Macbook 1,1

    Hello, I have a macbook 1,1 with CPU 2.0Ghz (i don't really know what is the right model) that a friend give to me after He buy a new one. It came with windows xp. I tryed to install windows 7 (without bootcamp, using only win7 DVD) and everything wa

  • On-Line Games

    Every time I select an on-line game to play, i.e., daily crossword, the puzzle will not open. All I see is the leaderboard. Anyone else having these issues? New to Xfinity and must say not too impressed when it comes to this issue.

  • Ipod shuffle 2GB issue

    I have an ipod shuffle 2GB. I put 15 songs on it. When it connect it to my computer, it shows all 15 songs there (also saying there is 2.09GB available), however only 3 songs play. Any ideas?

  • ValueBound() valueUnbound() for every jsp:setProperty .../

    Hi.           My helper class (implementing HttpSessionBindingListener) is put into           the HttpServletSession.           What I want is valueBound()/valueUnbound() on creation/deletion of the           session.           The following code: