[Wireless] MBP 9,1, error when installing b43 driver

I followed the guide for the 9,2 Macbook Pros, and tried to install the driver for b43. However, I get the following error when I run 'make':
gamma% make
make -C /lib/modules/3.13.7-1-ARCH/build M=/home/glitch/compat-drivers-2013-03-28-5 modules
make[1]: Entering directory '/usr/lib/modules/3.13.7-1-ARCH/build'
make[1]: *** No rule to make target 'modules'. Stop.
make[1]: Leaving directory '/usr/lib/modules/3.13.7-1-ARCH/build'
Makefile:103: recipe for target 'modules' failed
make: *** [modules] Error 2
I didn't find anything in the wiki about this, so I'm turning to the forum.

That page gives some horrible advice. Not only are you trying to build a module that is already included in the kernel, but this page tells you to do it in a way that will result in untracked files in /usr. Essentailly you are trying to build a module from 9 months ago for the current kernel. Even if this were what you needed to do, you should be using the Arch packaging tools to install it with pacman (its actually super easy).
If you still want to use b43, just install the b43-firmware from the AUR. This will pull the firmware out of the broadcom sta driver with the b43-fwcutter package and use it for the b43 modules.

Similar Messages

PCI standard PCI-to-PCI bridge error when install Chipset driver to T430 with Windows XP

Hi,
I have one T430 and wanna downgrade to Windows XP. After I finished installing OS and procceded to update drivers, this error message
"Cannot Install this Hardware
There was a problem installing this hardware PCI standard PCI-to-PCI bridge
An error occurred during the installation of the device
The data is invalid"
came out when trying to install Chipset driver, which is the only one I failed.
Any ideas about this problem? Thank you.

Hi,
Please restart your system and re-install.
Ps should work now.
Regards,
Ashutosh

MBP "System Profile" error when try read "Logs" and long time blue screen

MBP "System Profile" error when try to read "Logs" and it takes long time blue screen at startup.
This happened all time when I open the "System Profiler" application and then select the option "Log", then the system crashed again over and over. The system was reinstalled clean but the error occurs again, without any third party application installed.
Here is the error:
Sun Jun 22 20:13:47 2008
panic(cpu 0 caller 0x001A8CD4): Kernel trap at 0x007efc12, type 14=page fault, registers:
CR0: 0x80010033, CR2: 0x00000000, CR3: 0x013ab000, CR4: 0x00000660
EAX: 0x00000000, EBX: 0x045ce1e0, ECX: 0x05782c64, EDX: 0x00010001
CR2: 0x00000000, EBP: 0x344d3ca8, ESI: 0x046ad5c0, EDI: 0x046a8040
EFL: 0x00010206, EIP: 0x007efc12, CS: 0x00000008, DS: 0x00010010
Error code: 0x00000000
Backtrace, Format - Frame : Return Address (4 potential args on stack)
0x344d3ab8 : 0x12b0fa (0x459294 0x344d3aec 0x133243 0x0)
0x344d3b08 : 0x1a8cd4 (0x4627fc 0x7efc12 0xe 0x461fac)
0x344d3be8 : 0x19ede5 (0x344d3c00 0x206 0x344d3ca8 0x7efc12)
0x344d3bf8 : 0x7efc12 (0xe 0x48 0x10 0x3e0010)
0x344d3ca8 : 0x3ef261 (0x45ce1e0 0x46a2c40 0x49a7a4 0x0)
0x344d3ce8 : 0x40abe6 (0x46a8040 0x46a2c40 0x344d3d28 0x3eeac0)
0x344d3d08 : 0x40e4fb (0x46aec00 0x46a2c40 0x46aec04 0x46aec00)
0x344d3d28 : 0x43ab14 (0x46aec00 0x46a2c40 0x600000 0x19c8d1)
0x344d3d78 : 0x18801e (0x46aec00 0x4a5e5ac 0x4a5e5c0 0x11d975)
0x344d3db8 : 0x12d17e (0x450adac 0x4a5e590 0x0 0x0)
0x344d3df8 : 0x126257 (0x450ad00 0x0 0x18 0x344d3ee4)
0x344d3f08 : 0x1973dd (0x344d3f44 0x0 0x0 0x0)
0x344d3fc8 : 0x19f3b3 (0x479fee0 0x0 0x10 0x0)
No mapping exists for frame pointer
Backtrace terminated-invalid frame pointer 0xbffff1c8
Kernel loadable modules in backtrace (with dependencies):
com.apple.iokit.IOFireWireIP(1.7.1)@0x7ea000->0x7f2fff
dependency: com.apple.iokit.IOFireWireFamily(3.4.4)@0x6ed000
dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x5d1000
BSD process name corresponding to current thread: ioreg
Mac OS version:
9D34
Kernel version:
Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
System model name: MacBookPro3,1 (Mac-F4238BC8)
This is the System Config:
Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplayspciedevice, 256 MB
Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 1 incoming serial ports
Network Service: Ethernet, Ethernet, en0
PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA

Hello @larrycarol99,
I understand that after upgrading your computer when you plug in an ethernet cord you get a hardware malfunction error. I am providing you with a Microsoft Support document: Hardware Malfunction Results in System Error Message that explains what causes that error and provides steps on fixing it. I am also including a link to the Compaq Presario 5300US Desktop PC Drivers page, which unfortunately does not have any drivers for your computer running Windows Vista.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Error when install Infrastructure 10g 10.1.2 in Windows2000 server

My environment:
RDBMS Version: 10.1.0.3.1
Operating System and Version: Windows2000 SP4
Product (i.e., OAS, IAS, etc): 10g AS Release 2
Product Version: 10.1.2
JDK Version: 1.4
I have the folowing error when installing the Infrastructure (in the stage of SSO Configure Assistant):
Default Subscriber GUID: E0575BDE015C411CAD99BDEF85F79029
Subscriber Naming attribute: dc
Default Subscriber Name: server01
*** Resetting user DN and GUID information ...***
Done....
PL/SQL procedure successfully completed.
No errors.
Disconnected from Oracle Database 10g Enterprise Edition Release 10.1.0.3.1 - Production
With the Partitioning, Real Application Clusters, OLAP and Data Mining options
NLS_LANG character set = WE8MSWIN1252
NLS_LANG param = AMERICAN_AMERICA.WE8MSWIN1252
ERROR : Exception while configing SSO DAD :
oracle.ias.repository.schema.SchemaException: Unable to establish connection to the Oracle Internet Directory Server ldap://myserver.domain.com:3060/. Base Exception : javax.naming.CommunicationException: Request: 1 cancelled
at oracle.ias.repository.directory.DirectoryReader.connect(DirectoryReader.java:124)
at oracle.ias.repository.IASSchema.getDBConnect(IASSchema.java:523)
Please advice.
Thanks
Trung

I don't know much about the 10g Releases yet but I had the same error with 9.0.2.3. The problem is that OID isn't available when it needs to be.
When you get the error, start OID using the command line then try running the config assistant again.
Hope this helps
Alex

TS3212 I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

I get an apple application support error when installing itunes. It says uninstall and re-install. Does not work. same message. What is a solution?

Is that an error 2 message?
If so, let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.)

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

?I am getting an error when installing on my dell inspiron with latest updates for drivers. Error 1406. I have the problem with Scan Snap software and a full version of reader.

Error 1402 | Error 1406 | Acrobat, Reader

What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?!

Hello,
My computer was working perfectly with Win7 for about 2years until I formatted on monday to clean a little bit my drives ... Since then I'm unable to install windows again. I have the 0x80070570 error.
The complete error message is:
Windows cannot install required files. The file may be corrupt or missing. Make sure that all files required for installation are available and restart the installation. Error code:0x80070570.
What is the 0x80070570 error when installing Win7 or Win8 or Win 8.1 on a clean SSD/HDD ?! These versions are full from MSDN.
What I did already:
check my RAM (16go gskill)
remove unnecessary hard drives
replace my "old" SSD with a clean new one
remove my sound cards
remove the mouse and use only keyboard
reset the BIOS
check every LED on the motherboard (asus sabertooth z77) and there is no problem
What are the problems?
Thanks,
Adrien.

Hi,
If all images cannot be installed, we have a reason to suspect the hardware cause.
If you use two memory slots to get 16G RAM, I suggest you test with just one (8G) to check the result.
Alex Zhao
TechNet Community Support

Update Operation Fatal Error when installing Technical Preview Build 10041 Upgrade

I posted this in the Microsoft Community forums and was redirected here.
Below is the original post (URL: http://answers.microsoft.com/en-us/insider/forum/insider_wintp-insider_install/update-operation-fatal-error-when-installing/6eaff1b9-0223-4357-afc8-884382590e82 )
Hello,
In trying to perform an upgrade install of the Windows 10 Technical Preview Build 10041 (as is the latest available for direct download as of my writing), I am running into a problem I cannot find mention of anywhere else on the web.
I fall into two categories with regards to this build: A) Product tester who actually needs to test application performance under Windows 10 on bare metal, B) Semi-crazy techie who loves using (usable) beta software as his primary environment ;)
so it is rather important to me that I get this working on my machine in some non-virtualized respect. I am reluctant to do a full/fresh install if installation problems are happening, because my Windows 8 product key has been f***ed up from the
start (likely some random database corruption) and I've had to utilize phone support to get around an "unknown error" the last two times I've had to use it. So, for fear of that key completely crapping out on me, I don't want to move to Win10 unless
I'm confident it will install and I can stick with it (for better or worse) through the end. Problems within the Preview after I install it I can deal with.
So, I first tried to install the Preview through the standard Windows Update method. The installer took about 7 hours (but from reading lots of internet discussions, stupidly long install times in that range seem to be a common problem with
this builds separate from it actually failing). During the reboot between the "Setting up Devices" (Or is it Setting up Drivers? I forget) and "Taking Care of a Few More Things" (Again, possibly paraphrased), for about a split second, underneath
the Windows logo and throbber, some error like this appeared:
Fatal Error Performing Update Operation # of ##: ERROR CODE
It only appeared for a fraction of a second, and I had no chance of reading the precise numbers or error.
However, the installer then seemed to continue, and went until the main circle was at 100%. As soon as 100% hit, however, the screen went black for something like 30min. Then, I briefly saw "Attempting to recover installation" before "Restoring
your previous version of Windows." And I was, quite impressively considering how far along that installer was, back in Windows 8.1 completely unharmed.
I tried again by burning an ISO and doing a disc upgrade install. I let that one run overnight and was asleep for the error, but I was back in Win8.1 in the morning, so I can only assume a similar thing happened there.
As for my system specs, I'm running on a MacBook Pro 9,1 under Boot Camp. I am upgrading from Windows 8.1.2 Pro with Media Center. I have found other online accounts of people quite successfully installing Windows 10 on Macs, so that isn't the issue.
Does anyone have any clue as to what this error might have been/be, and how I might fix it? Or at least have it on good authority that a fresh installation would be unaffected (meaning it's software-related)? If not, I can try installing to a VHD,
which would at least let me product test on bare metal, but wouldn't have the harddrive space to be my daily driver and would probably only get used occasionally.
Thanks in advance to anyone who can help!
So far, I have the yet-to-be-tried idea of a clean boot prior to installation.
If anyone here has any more specific ideas, lemme hear 'em.
Thanks!

To the individual who proposed this as an answer to my problem: It's not even applicable. I specifically stated that I was trying to avoid doing a clean installation (at least without knowing more about the problem at hand). An answer saying to do the thing
you're trying to avoid doing is not an answer. You can see my last reply for the current status of this issue. 6-8 hour blocks of time in which I can't use my computer (as is required to install build 10041) aren't super common for me, but I haven't abandoned
this thread. There have simply been no more updates. If your motivation as a mod was that you simply don't like there being unanswered threads on this forum, then perhaps you could attempt to contribute rather than arbitrarily marking the first reply as an
answer.
I will continue to update this thread as I try new things and get more information.
Thank you.

Errors when installing Oracle Client 10.2.0.2.0 on zLinux (Red Hat)

I am receiving errors when installing Oracle Client 10.2.0.2.0 (Administrator) on zLinux. During the install I receive two notifications for File Not Found when the installer tries to create the link for lib32/libclntsh.so.10.1. I hit ignore on the pop-ups and the install completes. The Oracle Net Configuration Assistant then fails to launch with the following error:
Output generated from configuration assistant "Oracle Net Configuration Assistant":
Command = /opt/oracle/product/10.2.0/db_1/bin/netca /orahome /opt/oracle/product/10.2.0/db_1 /orahnam Oracle_home /instype custom /inscomp client,oraclenet,ano /insprtcl tcp /cfg local /authadp NO_VALUE /nodeinfo NO_VALUE /responseFile /opt/oracle/product/10.2.0/db_1/network/install/netca_clt.rsp
UnsatisfiedLinkError exception loading native library: njni10
Configuration assistant "Oracle Net Configuration Assistant" failed
The "/opt/oracle/product/10.2.0/db_1/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.
I have seen multiple threads relating to very similar errors, but none of the fixes that were suggested have worked. I have double checked the required Red Hat packages and made sure they were all installed on the server. All of the prerequisite checks for the installer are successful. Any assistance would be of most helpful!

Worked with my Linux system admin and figured out that we were indeed missing some packages. There are 390 and 390x rpm's for Red Hat on System Z, i.e. 64 bit and 32 bit versions. Since we are running a 64 bit os some of those 32 bit packages did not get installed. Since our roles are split up, I am kind of blind as to the OS setup so I was not able to catch the problem. It is truly puzzling as to why Oracle would need 32 bit packages even though Oracle client is 64 bit. Regardless, after adding the 32 bit rpm's the installer was able to perform the linking operation that was failing, and the network configuration script ran successfully.

Getting an "installer failed to initialize" error when installing CS5 from CD

Getting an "installer failed to initialize" error when installing CS5 from CD
Mac OS X Version 10.7.5

Try using the Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
If you continue to have problems getting the CD installation to work you can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site or else the download will not work properly.
CS5:
http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

Error when installing SDK on BW platform

We have successfully installed SDK to our DS client, but get an error when installing the extensions on the BW platform (SP12):
I understand that I need to reboot the portal server, but the error message indicate that the issue will not be resolved. Any suggestions?

Hi,
it could be that the depending extension was unpacked while installing the extension pack.
please go to folder C:\user\..\Analysis-config\plugins and check if the extension jar-file is available. If there is only a folder with the extension name you have to delete this folder,
uninstall the extension pack in your Design Studio (client side),
go to Eclipse and check the "Unpack after installing" checkbox in your project Features,
if it is checked please unckeck it,
export your extension pack to zip-file,
install your extenion pack again on client side,
now the jar-file should be available.
You sholud deploy your extension on Server without any errors.
kind regards
Patrick

Error when installing SM7 "The step runMigrationMonitor with step key "

Hi all
Please help for the following error when installing
ERROR 2009-06-13 00:27:13.515
FCO-00011 The step runMigrationMonitor with step key |NW_Onehost|ind|ind|ind|ind|0|0|NW_Onehost_System|ind|ind|ind|ind|2|0|NW_CreateDBandLoad|ind|ind|ind|ind|10|0|NW_ABAP_Import_Dialog|ind|ind|ind|ind|5|0|NW_ABAP_Import|ind|ind|ind|ind|0|0|runMigrationMonitor was executed with status ERROR .
Regards
Kevin

Hi Uday
import.monitor.java.log
Loading of 'SASACONT1' import package: OK
Import Monitor jobs: running 2, waiting 23, completed 4, failed 0, total 29.
Import Monitor jobs: running 3, waiting 22, completed 4, failed 0, total 29.
Loading of 'SAPSSEXC' import package: ERROR
Import Monitor jobs: running 2, waiting 22, completed 4, failed 1, total 29.
Loading of 'REPOSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 22, completed 4, failed 2, total 29.
Loading of 'SAPAPPL0' import package: ERROR
Import Monitor jobs: running 0, waiting 22, completed 4, failed 3, total 29.
Import Monitor jobs: running 1, waiting 21, completed 4, failed 3, total 29.
Import Monitor jobs: running 2, waiting 20, completed 4, failed 3, total 29.
Import Monitor jobs: running 3, waiting 19, completed 4, failed 3, total 29.
Loading of 'DOKCLU' import package: ERROR
Import Monitor jobs: running 2, waiting 19, completed 4, failed 4, total 29.
Loading of 'SAPAPPL1' import package: ERROR
Import Monitor jobs: running 1, waiting 19, completed 4, failed 5, total 29.
Loading of 'SAPAPPL2' import package: ERROR
Import Monitor jobs: running 0, waiting 19, completed 4, failed 6, total 29.
Import Monitor jobs: running 1, waiting 18, completed 4, failed 6, total 29.
Import Monitor jobs: running 2, waiting 17, completed 4, failed 6, total 29.
Import Monitor jobs: running 3, waiting 16, completed 4, failed 6, total 29.
Loading of 'DD03L' import package: ERROR
Import Monitor jobs: running 2, waiting 16, completed 4, failed 7, total 29.
Loading of 'SAPSSRC' import package: ERROR
Import Monitor jobs: running 1, waiting 16, completed 4, failed 8, total 29.
Loading of 'STERM_TEXT' import package: ERROR
Import Monitor jobs: running 0, waiting 16, completed 4, failed 9, total 29.
Import Monitor jobs: running 1, waiting 15, completed 4, failed 9, total 29.
Import Monitor jobs: running 2, waiting 14, completed 4, failed 9, total 29.
Import Monitor jobs: running 3, waiting 13, completed 4, failed 9, total 29.
Loading of 'SEOSUBCODF' import package: ERROR
Import Monitor jobs: running 2, waiting 13, completed 4, failed 10, total 29.
Loading of 'E071K' import package: ERROR
Import Monitor jobs: running 1, waiting 13, completed 4, failed 11, total 29.
Loading of 'SAPSDIC' import package: ERROR
Import Monitor jobs: running 0, waiting 13, completed 4, failed 12, total 29.
Import Monitor jobs: running 1, waiting 12, completed 4, failed 12, total 29.
Import Monitor jobs: running 2, waiting 11, completed 4, failed 12, total 29.
Import Monitor jobs: running 3, waiting 10, completed 4, failed 12, total 29.
Loading of 'ATAB' import package: ERROR
Import Monitor jobs: running 2, waiting 10, completed 4, failed 13, total 29.
Loading of 'SAPSPROT' import package: ERROR
Import Monitor jobs: running 1, waiting 10, completed 4, failed 14, total 29.
Loading of 'SAPSDOCU' import package: ERROR
Import Monitor jobs: running 0, waiting 10, completed 4, failed 15, total 29.
Import Monitor jobs: running 1, waiting 9, completed 4, failed 15, total 29.
Import Monitor jobs: running 2, waiting 8, completed 4, failed 15, total 29.
Import Monitor jobs: running 3, waiting 7, completed 4, failed 15, total 29.
Loading of 'SAPPOOL' import package: ERROR
Import Monitor jobs: running 2, waiting 7, completed 4, failed 16, total 29.
Loading of 'SAPSLOAD' import package: ERROR
Import Monitor jobs: running 1, waiting 7, completed 4, failed 17, total 29.
Loading of 'SAPSLEXC' import package: ERROR
Import Monitor jobs: running 0, waiting 7, completed 4, failed 18, total 29.
Import Monitor jobs: running 1, waiting 6, completed 4, failed 18, total 29.
Import Monitor jobs: running 2, waiting 5, completed 4, failed 18, total 29.
Import Monitor jobs: running 3, waiting 4, completed 4, failed 18, total 29.
Loading of 'SAPDDIM' import package: ERROR
Import Monitor jobs: running 2, waiting 4, completed 4, failed 19, total 29.
Loading of 'SAPDFACT' import package: ERROR
Import Monitor jobs: running 1, waiting 4, completed 4, failed 20, total 29.
Loading of 'SAPCLUST' import package: ERROR
Import Monitor jobs: running 0, waiting 4, completed 4, failed 21, total 29.
Import Monitor jobs: running 1, waiting 3, completed 4, failed 21, total 29.
Import Monitor jobs: running 2, waiting 2, completed 4, failed 21, total 29.
Import Monitor jobs: running 3, waiting 1, completed 4, failed 21, total 29.
Loading of 'SAPDODS' import package: ERROR
Import Monitor jobs: running 2, waiting 1, completed 4, failed 22, total 29.
Loading of 'SAP0000' import package: ERROR
Import Monitor jobs: running 1, waiting 1, completed 4, fail
ed 23, total 29.
Loading of 'SAPUSER' import package: ERROR
Import Monitor jobs: running 0, waiting 1, completed 4, failed 24, total 29.
Edited by: Kevin Wong on Jun 18, 2009 11:23 AM
Edited by: Kevin Wong on Jun 18, 2009 11:24 AM

Error when installing "contents of this disk cannot be changed".

I'm getting this error when installing Snow Leopard, 'The contents of this disk cannot be changed'.
Any ideas?

Install 10.5.8 COMBO update, then try SL.

Error when installing app

I keep getting an error when installing some apps - unknown error (0xE8000013)
Anyone know what this is or why this is happening???
any help apreciated

leefilmer,
Have you tried the steps in article http://support.apple.com/kb/TS1702 ? Reporting the problem to the particular application developer may be helpful, since it seems to be occurring with some apps.
Oddly, the article I found documenting the error doesn't seem related to the issue you're experiencing: http://support.apple.com/kb/TS1266. Do you have a SIM PIN on your iPhone by chance?
Other than that, have you tried restoring your iPhone and setting it up as a new phone? More information can be found here: http://support.apple.com/kb/HT1414 .
Hope this helps,
Raleigh

Error when installing applications

I am getting a error when installing a few different application.
I get this error installing the Citrix Receiver, I get similar errors when installing the Cisco VPN software as well. These are two very important aps for us and need to work on 8.1 if we are to move forward with upgrades.
Product: Citrix Receiver(USB) -- Error 1406. Could not write value GUID to key \SYSTEM\CurrentControlSet\Control\Citrix\Tracing\Modules\IcaClient_GenericUsb_Vdgusb. System error . Verify that you have sufficient access to that key, or contact your support
personnel.
It seams like it is not creating the key in the registry, even though I am a local admin on the system. I have tried running it as a domain admin with the same error. I have also verified I can create keys in the registry
I am currently running Windows 8.1 Enterprise eval on my laptop, we are testing this in our environment.
Thanks in advanced for any help, this one has stumped me a little.

Ask Cisco support/forum for help. This seems to be vendor/product specific
https://supportforums.cisco.com/discussion/12191531/cisco-vpn-client-wont-install-error-1406
http://community.spiceworks.com/topic/492304-cisco-vpn-client-installtion-error-code-1406
http://vootwerk.wordpress.com/2008/06/05/fix-error-1406-during-cisco-vpn-client-installation-or-upgrade/
HTH
Milos

[Wireless] MBP 9,1, error when installing b43 driver

Similar Messages

Maybe you are looking for