Wireless Media Server: "Failed To Load Component of Media Serve

When I try to install Wireless Software it always ends up in telling me "Failed to load component of Media Server" after I've restarted the system. Media Server is not running and no icon of Media Server is to be found in the system tray. ?

I am having the same problem. Did you ever get a solution?
I've tried:
uninstalling/reinstalling all the software
forcing exceptions in my firewall (Norton), showing they permit all traffic from the Media Server & Console
assigning a static IP address (my router shows the receiver as connected to the network)
But I still get the "Failed to load component of media server" message every time I log in to Windows or try to start the Media Server manually. When I try to do the receiver's Network Setup (either letting my router assign and address, or with assigning the static address), at first I get the flashing green lights, then just a solid red, with the message that my settings are incorrect. Are those two separate problems, or the same problem?
I am using a 2Wire HomePortal Gateway. The main computer I am attempting to set up through is connected by Ethernet to the gateway. I am using WEP 64-bit encryption with a single key. There are notes about "open" vs "Shared key" modes, but I don't know where to find that info in the HomePortal's settings. I have connected a laptop and a PDA wirelessly with no problems once the key is entered. I can see the receiver on the gateway's summary page of my home network.
Any help is appreciated!

Similar Messages

Failed to load Media Management Library

Hi,
I have an AIX Server which has 5 instances already running Oracle 9i and 1 instance on Oracle 10G.
We created a new database on this server and trying to run RMAN Backup. I get error message as follows:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03009: failure of allocate command on mcb1 channel at 02/26/2009 09:16:43
ORA-00604: error occurred at recursive SQL level 1
ORA-01422: exact fetch returns more than requested number of rows
ORA-19554: error allocating device, device type: SBT_TAPE, device name:
ORA-27211: Failed to load Media Management Library
Additional information: 2
I found that libobk.a file is not available under $ORACLE_HOME/lib. I created a link to this file. Still i get same error.
Can any one advice what might be wrong? We are on Oracle 10.2.0.4.
Thanks,
Giridhar

Excellent. Thank you very much Anand. It worked with the recommendations made in that article.
Thank You.
Giridhar

Linux - Oracle - Crystal Report Server XI : Error in File Report1: Failed to load database information.

I am using Crystal Reports Server XI on Linux Server with Oracle Server 10g.
I did install Oracle Client on Report Server and config Oracle SID in tnsnames.ora also. It works well with tnsping command. Then, I published a report which was created in Crystal Reports developer on this server.
When I preview the report on Report Server. I got the following error message:
Error in File Report1: Failed to load database information.
Try to fix the problem I ran web Central Management Console -> Objects ->Report1->Process -> Database and set there the following parameters:
Database driver: Oracle
Server: servers_host_name
Database: (tried both ORACLE_SID and tns_name)
User: oracle_user_name
Password: oracle_pw
It still got the same problem.
I will appreciate any help.
Tham.

I was having a similar problem in Crystal Reports Server 2008 v1, and had to install the full client to resolve it, which I didn't like. I poked around some, and was able to get the Instant Client working with a few minor changes. Note that I tried it only with the 32-bit Instant Client even though I was on a 64-bit system because that was what SAP recommended when I talked to them.
The changes I had to do was initialize the Oracle environment variables (the instant client doesn't have a script to do this for you) and to create a soft-link which is included in the full client, but not in the instant client.
To setup the environment variables I created a file called env.sh and put it in /opt/crystal/bobje/setup/oracle/, where /opt/crystal was my install path. This ensured that it got called by the /opt/crystal/bobje/setup/env.sh script which runs as part of the System init scripts to initialize the environment. The following is what I put in my file (again for the 32-bit 11g R2 instant client):
     export ORACLE_SID=summitdb
     export ORACLE_HOME='/usr/lib/oracle/11.2/client'
     export ORACLE_BASE='/usr/lib/oracle/'
     export TNS_ADMIN='/usr/lib/oracle/11.2/client/network/admin'
     export PATH="$:/usr/lib/oracle/11.2/client/bin"
     export LD_LIBRARY_PATH="$$/usr/lib/oracle/11.2/client/lib"
After that, I created the missing soft link using this command:
     ln -s "$/lib/libclntsh.so.11.1" "$/lib/libclntsh.so.10.1"
Once I had done those two things, and restarted the service using the /etc/init.d script, it worked fine.

When connecting to a server farm in sharepoint foundation 2013 cannot create new farm error: One or more types failed to load

When trying to create a new server farm in the sharepoint foundation 2013 we get a following error :
The local farm is not accessible. Cmdlets with FeatureDependencyId are not registered.
PS C:\Users\Administrator> New-SPConfigurationDatabase
cmdlet New-SPConfigurationDatabase at command pipeline position 1
Supply values for the following parameters:
DatabaseName: SharePoint_Config
DatabaseServer: PC78\SQLEXPRESS,25111
FarmCredentials
Passphrase: *********
New-SPConfigurationDatabase : One or more types failed to load. Please refer
to the upgrade log for more details.
At line:1 char:1
+ New-SPConfigurationDatabase
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : InvalidData: (Microsoft.Share...urationDatabase:
SPCmdletNewSPConfigurationDatabase) [New-SPConfigurationDatabase], SPUpgra
deException
+ FullyQualifiedErrorId : Microsoft.SharePoint.PowerShell.SPCmdletNewSPCon
figurationDatabase
And the error log is shown below :
Microsoft.SharePoint.Upgrade.SPUpgradeException: One or more types failed to load.
Please refer to the upgrade log for more details.
at Microsoft.SharePoint.Upgrade.SPActionSequence.LoadUpgradeActions()
at Microsoft.SharePoint.Upgrade.SPActionSequence.get_ActionsInternal()
at Microsoft.SharePoint.Upgrade.SPUtility.GetLatestTargetSchemaVersionByMajorVersion(Type typeActionSequence, Int32 majorVer)
at Microsoft.SharePoint.Upgrade.SPUtility.get_CurrentSPSiteWssTargetSchemaVersion()
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPContentDatabase database, SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, Strin... b712a522-fa85-49eb-b59c-dedf55295504
...g secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, String quotaTemplate, String sscRootWebUrl, Boolean useHostHeaderAsSiteName, Boolean overrideCompatibilityRestriction)
at Microsoft.SharePoint.Administration.SPSiteCollection.Add(SPSiteSubscription siteSubscription, String siteUrl, String title, String description, UInt32 nLCID, Int32 compatibilityLevel, String webTemplate, String ownerLogin, String ownerName, String ownerEmail, String secondaryContactLogin, String secondaryContactName, String secondaryContactEmail, Boolean useHostHeaderAsSiteName)
at Microsoft.SharePoint.Administration.SPAdministrationWebApplication.CreateDefaultInstance(SqlConnectionStringBuilder administrationContentDatabase, SPWebService adminService, IdentityType identityType, ... b712a522-fa85-49eb-b59c-dedf55295504
...String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateAdministrationWebService(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.CreateBasicServices(SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuilder configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, IdentityType identityType, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.Administration.SPFarm.Create(SqlConnectionStringBuil... b712a522-fa85-49eb-b59c-dedf55295504
...der configurationDatabase, SqlConnectionStringBuilder administrationContentDatabase, String farmUser, SecureString farmPassword, SecureString masterPassphrase)
at Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase.InternalProcessRecord()
at Microsoft.SharePoint.PowerShell.SPCmdlet.ProcessRecord() b712a522-fa85-49eb-b59c-dedf55295504
Error Category: InvalidData Target Object Microsoft.SharePoint.PowerShell.SPCmdletNewSPConfigurationDatabase Details NULL RecommendedAction NULL b712a522-fa85-49eb-b59c-dedf55295504
Leaving ProcessRecord Method of New-SPConfigurationDatabase. e9ae5ba6-c499-0000-d35c-aee999c4cf01
we are using server 2012 R2 and we don't have office 2010 installed

Yes,SQL server is on the same server as SharePoint
SQL has both the permissions Securityadmin
and DBcreator roles on SQL Server.
When we run those sharepoint management shell commands the database will be created with the error
msg (shown in attachment)

HTTP.SYS fails to load after ProLiant NIC driver update on Server 2008 R2

Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command
prompt...) DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because
it has no enabled devices associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then
restore the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...

Hi team,
This has been driving me crazy for a week and I can't find any reference to solving the problem in Technet or any forums...
I have a ProLiant ML350G5 server that I installed Server 2008 R2 on and migrated all my domain AD, DNS, File Services, Shares and files from SBS2003 (end of life, so let's take that out of the network) - Exchange and SharePoint were not being used so Standard
server 2008 was the choice seeing that the server hardware is 4 years old...
Everything went well, migration was successful, AD was primary and active.
Then (stupidly) I decided I'd better install all the updated drivers and management software from HP. The NIC is showing as an HP NC373i which is a Broadcom BCM5708C. I updated the FLASH in that card (HP utility) and updated the driver to the latest version
7.8.52.0 along with a bunch of other updates all handled by HP's Support Solutions Framework (msi).
After the reboot required, I noticed that the Print Spooler (set to Automatic) didn't start, neither did IIS or Web Services...
Trying to manually start them gives the error that a dependency failed. Now Print Spooler only uses HTTP (no longer a "service" but integrated into the kernel for multiple http connections on the same port and controlled using netsh http command prompt...)
DCOM and RPC. The last 2 are running, so that leaves HTTP as the culprit.
The Event Log shows that HTTP failed to load as "the services cannot be started. Either because it is disabled or because it has no enabled devices
associated with it"
From an administrator cmd prompt, net start http gives the same failure error.
netsh http show servicestate returns "The handle is invalid" - it's not seeing http at all...
OK. If you've read this far, thank you - keep going...
Here's my thinking... Updating the NIC driver has "broken" the association with HTTP.SYS - How to I get that association back?
I uninstalled anything http related, IIS, BITS, Web, Printing Services. Reboot after reboot and still no HTTP. I deleted http.sys from \windows\system32\drivers and did sfc to get windows to give me a clean one. Reboot, still doesn't load so it's not a damaged
http.sys.
I uninstalled EVERYTHING ProLiant, uninstalled the NIC, deleted the bxnd60a.sys driver so Windows would use it's own, rebooted, let it load NIC drivers, set the IP's up again, reboot - still no http.sys loading...
I've tried older versions of drivers from Broadcom, the latest version of drivers, still in the same hole...
Does anyone know how I can get HTTP.SYS to associate with the NIC? Can I do anything in the registry to achieve this? Do I have to do a System State Backup (is that the only way to preserve the AD and DNS?) scrub the server and start from scratch and then restore
the System State to get my AD and DNS back? If I do that will it bring the http.sys fault back?
I'm really at a loss - please, someone, please help...

Failed to load resource: the server responded with a status of 404 (Not Found)

I uploaded 2 x small Wordpress sites to Azure this morning using the local Git repository on my iMac. They worked fine when I checked them earlier and now I see the websites are not loading correctly with 30+ errors on each effecting all .css, .js and
.jpg files - using view source, these are the error messages.
Failed to load resource: the server responded with a status of 404 (Not Found)
When I open the web root in my ftp client the files are definitely there as you would expect. I am using Azure Small Basic Hosting, any thoughts on what has gone wrong and how to fix the websites?
Site 1: http://goo.gl/VONbHc
Site 2: http://goo.gl/wdTP67
Liam

Hi,
I tested your site 1, when I open http://goo.gl/VONbHc, it direct me to
http://templestudios.azurewebsites.net/ ,so I think you create templestudios as your azure website name. it seems that the page will go directory to another page, one image html code as below.
<img width="300" height="225" title="Portrait Photography" class="thumb wp-post-image" alt="Portrait Photography" src="http://www.photostudio.ie/wp-content/uploads/portrait-girl-dublin-300x225.jpg">
The image was not found seems more relate to
http://www.photostudio.ie , I open this site, contents are as following screenshot.
Hope this helps
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405

Hi,
while consuming the WCF service POST method Jquery, getting error in Chrome and firefox, in IE Its working fine.
ERROR:Failed to load resource: the server responded with a status of 405 (Method Not Allowed) XMLHttpRequest cannot load (WCF service URL). Invalid HTTP status code 405.
Jquery used to call:
$.support.cors = true
$.ajax({
type: "POST",
url: serviceURL,
data: JSON.stringify(managedProps),
useDefaultXhrHeader:false,
contentType: "application/json; charset=utf-8",
dataType: "json",
//processData: true,
crossDomain: true,
success: function (data, status, jqXHR) {
alert("sucess");
error: function (xhr) {
alert("error");
WCF sevice Web.config
<webHttpBinding>

<binding name="crossDomain" crossDomainScriptAccessEnabled="true" transferMode="StreamedResponse" />
</webHttpBinding>
</bindings>
<services>
<service name="DynamicRefinerWCF.DynamicRefiner">
<endpoint address="" behaviorConfiguration="REST" bindingConfiguration="crossDomain" binding="webHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<endpoint address="mex" binding="mexHttpBinding" contract="DynamicRefinerWCF.IDynamicRefiner" />
<host>
<baseAddresses>
<add baseAddress="http://localhost/example.svc" />
</baseAddresses>
</host>
</service>
</services>


</system.serviceModel>
<system.webServer>

<modules>
<remove name="WebDAVModule" />
</modules>
<handlers>
<remove name="WebDAV" />
</handlers>
<directoryBrowse enabled="true" />
<httpProtocol>
<customHeaders>
<add name="Access-Control-Allow-Origin" value="*"/>
<add name="Access-Control-Allow-Headers" value="Content-Type"/>
<add name="Access-Control-Allow-Methods" value="GET, POST, PUT, DELETE, OPTIONS"/>
<add name="Access-Control-Request-Headers:" value="*" />
<add name="Access-Control-Request-Method:" value="*" />
</customHeaders>
</httpProtocol>


</system.webServer>
</configuration>
Thanks,
Swathi

Right on - I have done that a number of times.

Intel HD3000 graphics and sound drivers fail to load on Server 2008

I managed to install Windows Server 2008 x64 on a separate partition without Boot Camp, but I'm having issues with my drivers. Windows 7 drivers are compatible with Server 2008 in most cases. Since Boot Camp doesn't support Server editions I attempted to install the drivers myself, but I keep getting error 39 on my HD3000 graphics drivers. Went through multiple reboots, rollbacks, and driver reinstalls using both the official drivers and the Boot Camp drivers.
Is there a way to modify the Boot Camp driver install package to bypass the Windows 7 requirement? I tried to manually install the drivers from the Boot Camp folders (tried several variations of them as well) but I'm still not getting proper sound, graphics, or wifi. All my services are properly configured to enable them, and the device manager shows driver failed to load errors.
If people are able to get Windows 7 drivers installed that means there needs to be a way to do this with Server 2008 (not R2).
I need this to run natively, not virtualized.
Seems to me the easiest way to fix this would be to bypass the desktop-only limitations of Boot Camp, but I'm guessing there's no easy work around.
. Why the restrictions?
I'm running a MacBook Pro 8.1 (late 2011 release).
I tried using test mode but that failed to fix what I thought might be a driver signing issue.

IIRC, Apple doesn't expose the Intel embedded GPU to WIndows, only the discreet GPU. If my memory is correct, that would explain why you can't install the drivers for hardware that WIndows doesn't see.

Failed to load webapp and Could not discover administration URL for server

Not able to deploy application on SOA server.
Hi All,
I am not able to deploy my application to the SOA server as i am getting the below error..I am not using bam server at all and still it is saying "Could not discover administration URL for server 'bam_server1'." plz help.
[07:53:58 PM] [Deployer:149191]Operation 'deploy' on application 'ProjectCreationApplication' is initializing on 'soa_server1'
[07:53:58 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ProjectCreationApplication on soa_server1.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
[07:53:59 PM] [Deployer:149193]Operation 'deploy' on application 'ProjectCreationApplication' has failed on 'soa_server1'
[07:53:59 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application ProjectCreationApplication on soa_server1.: Failed to load webapp: '/workflow/ProjectCreation_UI'.
[07:54:01 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: '/workflow/ProjectCreation_UI'
[07:54:01 PM] Caused by: java.lang.ClassNotFoundException: oracle.bpel.services.workflow.client.worklist.servlet.IntegrateTaskFlowWithTask
[07:54:01 PM] See server logs or server console for more details.
[07:54:01 PM] weblogic.application.ModuleException: Failed to load webapp: '/workflow/ProjectCreation_UI'
[07:54:03 PM] Taskflow deployment failed to deploy to server. Remote deployment failed
[07:54:03 PM] #### Deployment incomplete. ####
[07:54:03 PM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)

Hi Vipin,
Might be the way you're deploying your ADF UI project.
Are you right clicking the name of your ADF UI project in the Application Navigator tab and then clicking "Deploy"? While this works great for your BPM composite project, you'll get errors like this when deploying the ADF project in the same manner.
Dan

Server Admin Problem - File Sharing fails to load

We recently switched over from a 10.4 server to an Intel Quad Core Xserve running 10.5.8. Things seemed to be working for about a week but now The File Sharing part of Server Admin fails to load. After spinning for a few minutes I get a kNetworkError on the File Sharing Service.
I'm not totally through setting up all the share points so this is causing quite a problem. Otherwise the Sharepoints that are set up are working properly. The first time this happened a server restart cleared the problem. This time nothing seems to help.
Anyone have a cure for this?

The problem seems to be getting worse. Once the error occurs some of the other services are not available through SA either. Anybody have any suggestions, or is it a reformat and reinstall situation?

Forms 11g Server compilation issues: FRM-18108: Failed to load the following objects

Attempting to upgrade to 11g (Forms 11 Version 11.1.2.1.0 on Linux) from 9i.
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - 64bit Production
Compiling an FMB on the server (not windows PC) is giving error FRM-18108: Failed to load the following objects. The compiler is unable to find OLB files and PLL files. This seems to be a config issue but I cannot track it down.
We have a /nhbcapps/lib for library and object library (pll, olb) files and we have a /nhbcapps/bin for executables (mmx, fmx, plx)
We have our own envmt file, cdb.env (in same folder as default.env):
FORMS_PATH=/nhbcapps/bin:/nhbcapps/lib:/app/oracle/Middleware/Oracle_FRHome2/forms:/app/oracle/Middleware/asinst_1/FormsComponent/forms
PATH=/nhbcapps/bin:/nhbcapps/lib:/app/oracle/Middleware/Oracle_FRHome2/bin:/app/oracle/Middleware/Oracle_FRHome2/jdk/bin
formsweb.cfg:
envFile=cdb.env
Please could anyone help get this working?

Your module NC_REF.fmb (or NC_REF.olb), which is referenced for shared objects, cannot be found. The best way to test it is to place it in the working directory (the start-in directory of the windows shortcut from where you launch Forms Builder). That way you are independent from the FORMS60_PATH, because the working directory is searched first.

Failed to load database information. Crystal Reports Server 2008

Received the following error message:
Error in File Relatorio4: Failed to load database information.
I'm trying to run a report Crystal Reports 2008 in Crystal Reports Server 2008.
Configuration:
Driver connection: Oracle Server
Server: Windows Server 2003 R2
Any help would be appreciated!

Hi Vilari,
What is the drivers you are using to connect to your database.
Just check with the connection type you are using.
Is the SQL connection with user credentials are working fine.
Just try to connection with SQL 2000 drivers rather than 2005 native client drivers.
Thanks,
Naveen.

"View failed to load" error when I open Resources - Project Server 2013

Hello,
I get the following error when I open the Resources Page (I am using Project Server 2013):
"The view failed to load. Press OK to reload this view with the default settings. Press Cancel to select another view"
Help please.

Hi,
Is your environment up to date with the latest SP/CU?
HAve you tried selecting another view?
See those hotfix :
http://support.microsoft.com/kb/2760261/en-us
http://support.microsoft.com/kb/2863881/en-us
Hope this helps,
Guillaume Rouyre, MBA, MCP, MCTS |

Scan to pdf failed to load pdf document (wireless)

I have a photosmart d110a and I cannot scan wireless to PDF file (get error failed to load pdf document)
I am able to scan to JPEG,
This has always worked before.
This is on multiple computers: ChromeOS, and Mac operating systems.
I have checked to see if software update to date and it is.
I have unplugged printer to see if that would help and did not.
Printing works fine with no problems.
Any suggestions would be greatly appreciated

Hello everyone, I've been looking into this issue,
Tom - Due to feature limitations, the abilities you are looking for don't appear to be available with this printer. I would recommend a USB connection to scan.
Paul - I would love to try and help you, but I do need a little information first. I am linking a few HP Support documents below that will show you how to find your product number. Also, please include which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit. With this information and the product number we can provide you with accurate information.
How Do I Find My Model Number or Product Number?
Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
Which Windows operating system am I running?
Is the Windows Version on My Computer 32-bit or 64-bit?
Ray84 - I would recommend updating the printer firmware:
HP Update Software Utility
I would also suggest downloading and running the HP Print and Scan Doctor.
Bravo52 - What version of Windows are you running?
I would also suggest downloading and running the HP Print and Scan Doctor.
I would suggest this document to everyone as well:
Printer Does Not Maintain Wireless Connection
Please keep me posted.
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

AP Downloader-"Failed to load plugins to get media from devices"

I'm using Photoshop Elements 6.0/ Premiere 4.0, the problem comes up if I try to load to either program. I have it set to automatically download my pics when I insert a media card into my computer; the following dialog box comes up when I insert a card; Adobe Photo downloader- “Failed to load plugins to get media from devices”. I tried to fix the problem by using the Adobe CD, but the program asks for “Disk 1”, the original disk is in & I have no other disks. What needs to be done to correct this problem?
Thank You
photodave77

Dave,
Please close Organizer and delete the folder Organizer inside your user folder @ path: C:\Documents and Settings\<username>\Application Data\Adobe\Photoshop Elements\6.0\Organizer.
This would delete your APD preferences. If relaunch doesnot fix the problem, remove your card and restart your system and try again. Let me know if this works.
~V

Wireless Media Server: "Failed To Load Component of Media Serve

Similar Messages

Maybe you are looking for