Wireless media transfer in Z3 Compact, NOT CONNECTING

Need Help! Using Z compact. Pairing OK but wireless media transfer says NOT CONNECTED. How to solve this? Thanks

Hi and welcome to the community! Since you're new please be sure that you have checked out our Discussion guidelines.
Have you tried to restart your router? If yes, I suggest that you take a look in the following FAQ-topic to see if you find any tips:
https://talk.sonymobile.com/t5/FAQ/Wi-Fi-problems/m-p/348104
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

Error: wireless media transfer doesn't work

Good day.I have a problem on my Sony z Ultra. It can not make a wireless wi-fi connection with my PC. A few times i have connected my phone with PC wireless, but then it seem to be that I have something spoiled. Now PC tell me that "it isn't possible to coordinate device parameters with this system"What can I do in this situation?

Hey guysHave you read what the gentlemen above wrote?wireless media transfer doesn't work....not usb cable connection does not work.!!! I have the same problem.Can you please help me with it? Win7Pro64bit, Sony Experia Z1 compactI follow all the steps as given by the phone, it even says, the devices are pairedbut when I want the devices to connect, it just hangs and then gives me message "It isn't possible to connect to [yourpc]" Can you please give me some troubleshooting steps?What to check, where to look, how it works, links, articles, anything? please Thank you Hugo

I recently replaced my dead airport router with a netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer and yet when I try to print wirelessly I get the message: "printer not connected; printer offline".

I recently replaced my dead airport router with a Netgear91-5g router and synced it successfully to my Lexmark Pro 915 printer and my computer; yet when I try to print wirelessly I get the message: "printer not connected; printer offline". Lexmark support verified that my printer was connected to the new router and the problem was with the computer's printer configuration and they could reconfigure it online if I paid for their "Premium Support" services ($119 for one year, 3 fixes). I declined, feeling sure that this is something I could do if I knew how. Could it be an incompatability issue with OS 10.8.3?

You saved me $$$ that I can ill afford on my fixed income. I was very unhappy with the "support" from Lexmark... what a rip off! Thank you dwb!

Wireless Media Transfer PROBLEM

So, I've got my Z1C in here, trying to pair it with my PC through cable, and both are connected on the same network.
I tried from the phone itself "Settings>Xperia Connectivity>Wireless Transfer" , then following the steps, I end up with confirmation from my PC, and I get a "Finish" message from my mobile saying it will connect automatically when I unplug the cable, so I go ahead and do it, and it takes forever till it tries to connect but with no hope and ends up with " Not Connected " on my phone, and I can't even access it from my PC.
I also tried using a similar method from SONY PC COMPANION, which pretty much didn't even give me a confirmation message, but an error instead.
Any help ?

I have the same problem. I installed air droid and I gave up trying...

Wireless network monitor says I'm not connected to internet, but I am?

Hi,
I have a WRT54G v6 and a WUSB54GC. I can connect to the inter just fine and for the most part the linksys wireless network monitor says I'm connected to the access point and internet. The problem is occasionally it will says that I'm connected to the access point but the internet when I really am and I can browse the web just fine. I get the not connected to internet msg for a few minutes then it just goes back to connected. Any ideas?

Hi...
I think here the issue may be that the utility and the internet connection are not getting synchronised. The operating system on your computer is it win XP? If it is win xp, u can use the windows wireless software to manage to your wireless network. In order to use the windows wireless zero configuration, right click on the linksys icon at the bottom right hand corner of the task bar, select the option that says "use windows wireless ....".
The linksys icon will be grayed and windows will be managing the wireless network. Connect to your wireless network and you should be able to go online.

I have a HP2101nw wireless print server and it will not connect to my router.

The status of my wireless print server always says it is not connected and idle on both my laptops. I have tried to connect through the advanced settings but it does not find my router. I have tried to connect manually but it fails. Could a firewall be blocking it? My router works fine on the internet for both laptops. Any ideas?

If other wireless devices are connecting OK, you know that the AirPort Express is operating correctly since all devices are receiving the same wireless signal from the Express.
It's possible, but extremely unlikely that there will be other Samsung phone users on an Apple support forum, so I would suggest that you check with Samsung support to reset the Samsung phone back to default wireless settings so you can set up a new connection again.

Adobe Media Encoder Dynamic Link Server NOT CONNECTING to Premiere Pro

I have Media Encoder CS5, as part of the Creative Suite 5. My programs say that I have no updates to install, so everything is up to date.
I am having an issue with the dynamic link server.
Here's what has happened thus far.
Recently when I have tried to encode a project sequence from Adobe Premiere Pro it DOES NOT work. This is the first time that has happened.
I repeated the process and again, it still happened, unable to connect to the Dynamic Link.
The Error messages that I was getting was "could not read from source. Check if it has been moved or been deleted"
Once, I received this, I went to check to see if all files were linked properly, and they were. Everything was rendered and all was good in the timeline and the project itself.
Yet, again, the error message appeared.
Then I tested a previous project that I knew had been exported and worked through Adobe to Media Encoder. And all the files were linked properly and yet again received the error message I wrote above.
Then I thought the Dynamic Link itself wasn't working properly, so I tested importing an Adobe After Effects Comp into a Premiere Timeline and it DID WORK.
Then I went and tested if a video file of an already exported project would be able to sync to Media Encoder. And this WORKED.
I then went to add the file directly from Media Encoder and when I went to add a sequence from a saved Premeire File, it would take about 5 minutes "Connecting to Dynamic Link Server", to then state, "Connecting to Dynamic Link Server Failed"
My question is, how do I fix the dynamic link between Media Encoder and Premiere? Because, additionally, importing and After Effects Sequence works with Media Encoder.

I've been searching/troubleshooting for days, none of the firewall, new shortcuts in folder, antivirus, you name it I tried it even wiped my system which seemed to work at first..
What did it for me in the end was I had Dxtory (a software recorder, for recording gameplay) running on startup, and somehow it interfered with only Premiere projects in Media Encoder, I could still import AE projects go figure.
Check all the programs you have running or use sometimes, if they have some sort of hook into other programs/deal with video/codecs this could be your problem too!
Thanks to everyone trying to solve this problem!
-JonOfAllGames

My iPad 2 is connected to wireless, but safari says it's not connected to the internet

My wife went on a trip and took our iPad 2 with her. While she was gone, I had to replace our wireless router (we use AT&T U-Verse). Wireless works fine on my iMac and on my iPhone 4, but not on the iPad. I've put in the correct wireless information (Settings says it's connected to the wireless), but I can't connect to the internet. I've tried updating the software, as well as rebooting my iPad. Suggestions????

Here are several things that you can try that might help.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up.
Check Settings>General>Date &Time>Set Automatically>On.
Reset your router by unplugging it from power for about 30 seconds and then plug it back in again.

CAN NOT CONNECT TO WIRELESS INTERNET ON IPAD 2, CAN NOT CONNECT TO WIRELESS INTERNET ON IPAD 2

i had to switch out my ipad and now for some reason when i try to conncet to the internet it not letting me please help some one i have reset wifi like 5 times it not that because the computer works fine with the wifi

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
Additional things to try.
Turn Off your iPad. Then turn Off the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
On your iPad go to Settings > General > Reset > Reset network settings and see if that enables you to connect.
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
 Cheers, Tom

Can you print from an ipad to a wireless printer if the printer is not connected to the internet?

I am purchasing an iPad for my mother; she lives in a farm with no possibility of high speed internet, however, Verizon does have good cell phone coverage there.
So here is my question: she will have an iPad with 3g internet access. I want her to be able to print to a wireless printer; however, the printer that I buy will not be hooked up to any computer or internet...
1) can a wireless printer be discovered on the ipad without any additional hardware?
2) will i need to purchase a router and hook this router up to the printer to send out the wireless printer's signal?
someone please help. her ipad won't be much good if she can't print docs and photos.
thanks in advance...

It sounds like her situation is like mine at school--I find what I want with my Internet capable network, then switch to my ad hoc network for printing, so make sure she's comfortable going into settings and turning WiFi on and selecting a network.
And make sure you allow yourself time for the initial printer setup--and do that somewhere where you have Internet access for the firmware updates and test the printer and then do the ad hoc setup at her home.
(You can also use an Airport Express to set up local network and just connect to the Internet (and ignore the warning light). I played around with this and it's a much more powerful network but overkill for what most people need.)
The ad hoc network just requires a name and a WEP password. Make sure you write down the password and the network name in case she has to join the network again.
I actually found the Amazon reviews for my printer very helpful in terms of explaining the set-up process.

MY LINKSYS WIRELESS ROUTER STOPPED WORKING AND WILL NOT CONNECT !!!! HELP

SIMPLE FIX : PRESS AND HOLD THE RESET BUTTON FOR 30 SECONDS. THE RESET BUTTON IS LOCATED ON THE BACK OF THE LINKSYS MODEM. DONE !!!!!!! YOU'RE WELCOME !!!!

Maybe one fix however there maybe other problems or interferences that may cause devices not to connect or inhibit proper router operations. Entails more troubleshooting then doing a factory reset. Sometimes it could help though.
Thanks for your suggestion though.

Pointing out a bug with Z10 not connecting wirelessly to BBLink

After troubleshooting the following problem - BBLink does not recognize the Z10 wirelessly even though it is recognized by every thing else on the router's netowrk - I have discovered:
(1) it works the first time you connect the phone wirelessly with BBLink
(2) It does not connect to BBLink through wireless from then on.
(3) The ONLY way (I tested everything I could think of or look up in the forums*) to establish the connection again is to do a battery pull.
(4) Then the next time you try to establish a wireless connection to BBLink it does not connect (back to point 2 ...)
*I tried:
Rebooting computer
Rebooting phone
Rebooting wi-fi router
Restarting BBLink
Re-install / repair existing installation of BBLink
Removing my Z10 from BBLink and setting it up from scratch
Activating / deactivating / reactivating all options in BBLink
Changing every "Setting" and option on the Z10 in regardes to wi-fi connections and applications using wi-fi to connect to my computer (they all work properly; i.e. I can use wireless to access folders on my computer, as setup using BBLink)
Uninstalling BBLink (and using a third-party program to scrub all files and registry entries)
Clean install of BBlink

Are you saying that 802.11g cards were the first to support WPA?
Some disambiguation is needed. Speed is not the issue here, but WPA compatibility. I'm in the same boat. However, for about 6 months, my TiBook w/Original Airport Card did indeed connect using WPA (at 802.11b on a "b/g" network)...but no longer...others on these boards have had the same experience.
My expanded comments are in this thread: <http://discussions.apple.com/message.jspa?messageID=12466697#12466697>
Message was edited by: Scott in Boston

I have an ipad3 which has been spontaneously restarting and is not connecting well to either mobile service or wireless networks.

I have an ipad3 which has been spontaneously restarting and is not connecting well to either mobile service or wireless networks. It has become unusable. Is there a software update to fix this issue?
I have tried removing and reinserting the sim card - I am not even being asked to put in the sim pin to unlock the sim
I have reset the network settings and reconnected to my wireless network. I can get onto the wireless network but the ipad does not connect to my carrier even though my mobile phone (same carrier) has great service.
It seems to me that due to the connecton issue the ipad then restarts itself so I cant even use it for the local apps that do not require any connection to run because every few minutes the unit reboots.
heading to an istore tomorrow to have it looked at but wondered if there is a software upate or setting I can change myself to fix this isse.
not happy after the cost of the unit and ony had a few days use before the issues started!

Thanks Alan,
in the end it was replaced at the Apple iStore, they restored factory settings and it was still playing up for them too. Weird but the replacement is working perfectly!!

IPad will not connect to wireless

iPad will not connect to wireless network, keeps trying but will not connect. Working on our other iPad that has no issue connecting to the same network

Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
And this - Unplug the charger from the iPad and then replug. May resume charging.
Or - Recalibrate the battery. See link below.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
What to Do If Your iPad Won't Charge
http://ipad.about.com/od/iPad_Troubleshooting/a/What-To-Do-If-Your-Ipad-Will-Not -Charge.htm
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
 Cheers, Tom

Deskjet 3050 HPJ610a not connecting

I have the above printer.
I am trying to get it to print using the wireless. I have been all over the HP pages, but nothing helps. I turn on the wireless connection, and the little screen says "wireless on" but it also says "not connected". How do I get the printer to connect to my wireless network?

Hello sandtalker. I understand you want to connect your printer wireless. I located the HP Wireless Printing Center which provides troubleshooting you can attempt to resolve your issue: http://www.hp.com/global/ca/en/wireless/troubleshooting.html
Please inform me of your results. If this troubleshooting does not help, please provide your troubleshooting results for each step of the above link. If you could also respond with the operating system of your computer, that would be greatly appreciated.
Mario
I worked on behalf of HP.

Wireless media transfer in Z3 Compact, NOT CONNECTING

Similar Messages

Maybe you are looking for