Wireless MiFi4510L set up...I NEED HELP!

Okay,
Here's the story. I am a blonde young lady and cannot for the life of me figure out how to set this up. My brother is away on business and I have no one to help me...how can I set this up?
Is there any kind of online Customer Service chat?
Does anyone have a phone number I could maybe call?
My zip code is 07901 if that helps.
Thanks everyone!

Hello,
What are you having problems with on the MiFi 4510 when it comes to configuring the device? The MiFi is a device that comes ready to go with basic functionality out of the box, so you dont need to configure anything unless you have a specific objective in mind. If you share some specifics I'm sure we could help you out.
Otherwise the general Verizon 1-800 number should be able to route you over to tech support. The Customer Service number is 1 (800) 922-0204. Just ask for technical support and you can speak to someone for more help.

Similar Messages

Issue setting up iview - Need help

Hi,
I'm setting up an iview to surface a SAP BW report through SAP NetWeaver 7.0 (2004s)
I've tested the iview with the following value in the "BEx Web Application Query String" property of the iview
and am able to view my BW report in the portal iview as expected
CMD=LDOC&TEMPLATE_ID=Z_CCA_UK_FIB_OPEX_TOTAL&VAR_NAME_1=ZPERRESP&VAR_VALUE_EXT_1=W123456
I now want to use a variable so that the VAR_VALUE_EXT_1 property of the url is generated at runtime
The VAR_VALUE_EXT_1 property is the user's login id (which must be uppercased for the BW report) so my url now becomes
CMD=LDOC&TEMPLATE_ID=Z_CCA_UK_FIB_OPEX_TOTAL&VAR_NAME_1=ZPERRESP&VAR_VALUE_EXT_1=<User.userID[UPR_CASE]>
The above however fails to give me a report.
On debugging the url at the report end I can see that
&VAR_VALUE_EXT_1=<User.userID[UPR_CASE]> is being presented to the report rather than the user's actual login id
being substituted at run time as expected
I'm using the information here
http://help.sap.com/saphelp_nw04/helpdata/en/36/5e3842134bad04e10000000a1550b0/frameset.htm
as a guide but am unable to get my report to work with the runtime url parameter substitution
Has anyone come across this before and have a solution?
Thanks in advance
Krishna

Hello,
It sounds like you have almost everything set up but the vlan tagging on the ports. You will need to have inter-vlan routing disable which it seems like you have already done (enabling this feature will allow vlans to talk to one another). You may need to take a screen shoot of how everything is set up under L2 switch. Make sure all the ports are set to untagged and set to access port, you will need to put VLAN 1 on ports 1 and 2 and VLAN 2 on ports 3 and 4. As long as all the ports are set to access ports and untagged you should be fine at this point.
If you are still having issues take some screen shoots so we can check and see how it is set up.
Edit: while looking at the admin guide I see they are not called access ports. Guess its been a while since I've checked out a RVS4000.
Hope that helps!
Thanks,
Clayton Sill

RVS4000 Private networking, setting up VLANs need help!

Hello,
I live in a two family residential house and we share a common fibre connection to the internet. In the basement we have a modem/router(zyxel) which is in "bridge mode". Therefore not acting as DHCP.
Behind this zyxel we have a Cisco RVS4000 router. Ports 1 and 2 go to family A, and Ports 3 and 4 go to family B.
Family A and B have separate routers which are both set to "access point mode". Family A has an ASUS RT-N66U router while family B has a dlink DIR-615. The asus has an "access point mode" while the dlink needs to be set up manually to achieve this. The dlink must also have a static IP adress. The asus can receive ip adress.
What I have unsuccessfully tried to achieve and am currently begging for help with is to separate the networks so that both families can access internett, but at the same time it must be impossible to access VLAN1(Family A) from VLAN2(Family B) vice versa. Meaning no communication between the two families through the local network.
I have tried different options but I am not sure how to deal with trunk, tagged, untagged etc. etc. etc. It seems every time I manage to create two different networks there is still accessability/communication between the two VLANs and everytime I manage to give out different IP adresses to different ports i.e. 192.168.10.xx and 192.168.2.xx it is still possible to communicate. What also usually happens is that the internetconnection is severed at the same time.
Could anyone be so kind as to help me out? Since I am quite unseasoned in networking I need a step-by-step guide stating every action I need to take. If possible also with illustrations.
Any help will be much appreciated.

Hello,
It sounds like you have almost everything set up but the vlan tagging on the ports. You will need to have inter-vlan routing disable which it seems like you have already done (enabling this feature will allow vlans to talk to one another). You may need to take a screen shoot of how everything is set up under L2 switch. Make sure all the ports are set to untagged and set to access port, you will need to put VLAN 1 on ports 1 and 2 and VLAN 2 on ports 3 and 4. As long as all the ports are set to access ports and untagged you should be fine at this point.
If you are still having issues take some screen shoots so we can check and see how it is set up.
Edit: while looking at the admin guide I see they are not called access ports. Guess its been a while since I've checked out a RVS4000.
Hope that helps!
Thanks,
Clayton Sill

Design for wireless project....need help....

Hi Team
i have a requirement from client and need suggestions on the design. Client has 1 main office and 5 remote branches. client requires wireless in all offices. approx 600 access points with 100 in each location client requires all wireless access points to be registered at HO controller and a redundant controller to be at the branch. if the controllet @ HO goes down access point to be served by the controller local to the site.
Is this type of a design possible ? kindly do help me in suggesting the best for my clent.
Thanks !!!

The 7500 has two 10 gig connections that can be used. So you will need a 10 gig module to connect that to. You don't need to use a tertiary wlc unless you have one available. Usually two is good enough. Again.. You need to decide if you want to go local or h-reap. You can go either way, but why put one wlc in HQ and the other at the remote site. If your concern is 100% redundancy, then put two out at each site. If you have more money to use, then add another WLC at HQ for your tertiary. Now I don't think you need more than a 5508-500 at HQ because the percentage of loosing all 6 sites WLC's is pretty slim. If you go h-reap, then put the WLC's at HQ. Get 3 5508-500 for redundancy unless you have the WiSM2. If you have 10gig, then two 7500's will do. You have many options.
Thanks,
Scott Fella
Sent from my iPhone

HT203993 How do I make a new iCloud i have one set up but need help deleting it

i have an Apple ID and I know the password. I had set up an iCloud account but I put the wrong email.. So now I don't know how to delete it because I don't know the password please somebody help me

https://iforgot.apple.com/appleid
If you forgot your Apple ID password - Apple Support
Contact Apple for help with Apple ID account security
https://ssl.apple.com/emea/support/itunes/contact.html
(988)

Airport Extreme wireless no longer working. Need help!

Until a couple of days ago, I had my brand new Airport Extreme (ver 7.2.1) connected to a cable modem and everything was ok. My Macbook and my Airport Extreme were going wireless fast and easy.
After moving out of town, I’ve changed internet provider and I had to buy a ethernet modem, thus I bought a NETGEAR ADSL2+ modem (model DM111P) and suddenly I lost my wireless connectivity.
The modem looks working just fine. Infact, if I connect my Macbook to the modem NETGEAR DM111P with an ethernet cable, everything is ok.
Also, if I connect my Airport Extreme to the modem NETGEAR DM111P with an ethernet cable, and than I connect the Macbook to the Airport Extreme with another ethernet cable, everything is still fine: I can surf the web without any problems.
But when I try to go “wireless”, my Macbook is not able to find any base. I tried reseting my Airport Extreme to the factory settings and starting over, but It is impossible to “configure” the airport express wireless, because the Macbook doesn’t see it.
I’ve tried also with a wireless pc, but it was not able to find any wireless device.
I tried reseting my modem NETGEAR DM111P and my Airport Extreme to the factory settings and starting over again and I’m still not able to establish a wireless network. I can only access to the internet via ethernet cable. I’ve also turned off encryption. The computer still didn’t see the network. The IP address looks to be valid: 10.0.1.1.
I don’t know what else to do.
Is the Airport Extreme to be considered out of order and should I obtain warranty service or it is just a matter of settings? If so, what kink of settings?

I have been having a similar problem using 802.11g
with the netgear DM111p it's happy with ethernet but apparently has compatibility issues with AEBS
I found a number of reviews from AEBS users who have effectively given up trying to make this work
http://store.apple.com/Apple/WebObjects/ukstore.woa/wo/StoreReentry.wo?productLe arnMore=TK797
I'd say both companies should find a workaround

Struggling to set up. Need help with pairing Apple TV and the remote. Any guidance, other than holding down the Menu and R buttons?

I am using Ethernet cable to connect Apple TV. I have connected to Cable TV box as directed by cable provider. I have connected the HDMI cable from TV back to the Apple TV box. Power cord is connected. What am I doing wrong? Remote and Apple TV are not connecting....

Thanks for sending the link.....unfortunately we are a home without wireless...My phone and iPad use 3G and our TV and Mac computers are connected via Ethernet ....
That said, my new Apple TV is using Ethernet and I cannot use the app without wireless.
Thanks for your effort to assist!

Microsoft hosted network virtual adaptor - setting ip is impossible - need help

I am able to create hostednetwork and access internet when I have public or private wifi
when I try to do the same with my reliance data card and share the internet to other device, it failed
problem Is the ip address in hosted network client is disappearing as soon as exit the window.
by default it should be 192.168.137.1, 255.255.255.0 but I am unable to set it manually.
need help
I am waiting for the solution for more than six months

reliance data card?
which means.. its a broadband USB modem(CDMA type)
but now i have reinstalled the os. i got the solution for sharing internet from such a cdma type USB modem to hostednetwork.
the sol is
Creating a new connection( set up a new connection or network) in network and sharing centre .
assing the dial up code, user name , password in that setup.
dial the new conncetion
now your system is connceted to the internet (just like the process done by the software given in that usb modem to get connected to the internet)
now we can share this internet to the hostednetwork client.
so click on the new conncetion -> setting> sharing>share to other dev
fornew hostednetwork
cmd window as admin
type the following cmd in cmd window
netsh wlan set hostednetwork mode=allow ssid=funonly key=12345678
netsh wlan start hostednetwork

NEED HELP TO SET UP SMALL NETWORK - WIRELESS SIGNAL FROM NOVATEL U760 USB

Hello -
I need help setting up a small network in my new home in Florida, which has no wired broadband capability - not cable, not dsl. My options are satellite (which I'd like to avoid) or wireless broadband via Millenicom (or now Virgin Mobile) using their Novatel U760 USB stick.
Here are the network components - someone please tell me how to set this up:
PC #1 (has wireless card, but I've connected it by ethernet to the router)
PC #2 (no wireless card; connected via ethernet to router)
MACBOOK, 1 1/2 years old (2.1 GHz Intel Core 2 Duo, 4 gigs RAM), running OS 10.58, connected wirelessly to router.
AIRPORT EXTREME BASE STATION, Model A1143.
I'm not thrilled about using a wireless 3G signal as my primary one, (sprint network, claims 600 - 1400 kbps speed), but it costs 1/2 to 1/3 of what a slightly faster satellite signal would.
I have not ordered this service yet. Before I do, I'd like a clear understanding that I can, in fact, set up my simple network, which I'd probably do the same as it's now configured with cable broadband - both PC's plug via
ethernet into the Airport Extreme router, the MacBook connects wirelessly - AND,
my question is this:
Can I plug the wireless card - a Novatel U760 USB-stick device - straight into that USB slot in the Airport Extreme base station and will it automatically recognize that device?
Or, do I have to plug it into the MacBook and somehow share that wireless signal between the 2 PC's (only 1 of which has a wireless card, so I'd have to get a card for PC #2)?
And help anyone can provide will be much appreciated!
Thanks,
Em

from the Airport FAQ #14:
"Question: Can I connect my Soundsticks or other USB speakers to AirPort Express?
Answer: No. The USB port is for connecting a printer, not for other devices."
Im assuming other devices include USB modems.
So, I would say your cheaper route would be to get a second wireless card and just share your internet connection from one of your PC.

I need help in setting up a wireless connection

I need help in setting up a wireless connection.
I have a 2005 iMac G5 and currently I am using a Qwest DSL Modem with a Belkin router.
Qwest suggested that I buy a new wireless modem/router. It may be the Motorola 3347 or another wireless modem. I am worried about security when on the internet and have read about changing the SSID password and use the WPA for encryption. All of this is a mystery to me.
Also, I would like to buy from Directv the Linksys wireless adapter to use on my HD-DVR receiver to get their “On Demand Movies.”
My question is, does my iMac G5 have all of the security I need to use a wireless modem, and with the Linksys adapter can I view my photos or DVD’s in iMovie wirelessly to my TV in the living room?
I am concerned about security with a wireless setup, but it seems that all of the new TV’s have the ability to have a wireless connection to the internet.
Any suggestions would help me.
Thanks,
DaisyMay

NETGEAR RangeMax Dual-Band Wireless-N Router with 4 Ethernet Ports
Model: WNDR3400-100NAS | SKU: 1208844
This wireless router enables speeds up to 600 Mbps for efficient operation and features a broadband usage meter that ensures accurate measurement of daily, weekly and monthly Internet traffic.
4 Read reviews (21)
Sale: $79.99

I need help setting this up. 2 wireless routers off one internet connection

I have a cable internet connection. I want to connect a netgear wireless router and then plug in a 80ft ethernet cable attached to a Linksys wireless router. Can the Linksys router be used as an access point? Or basically I want to use both wireless routers. I need help putting this together.

Yes you can do that, here are the steps on hot to do it.The router A or your netgear must be configured like router A on the illustration on this link ^_^
Click Here
Many thanks,
Akira893
wE dOnt gEt mAd! wE gEt evEn!
^_^

Need Help With Wireless Bridging

Hello all, I have recently perchased high speed WiFi for my house so I could do some gaming on my Xbox. Problem is my roommate, who is a tech support professional, set the modem up in his bedroom, my Xbox is old and requires a wireless adapter to pick up signals but since the modem is so far away from it it barely recieves the signal. So currently I'm paying for nothing so I confronted him about this issue and he attempted to fix it by wirelessly bridging a router to the modem but after a month he hasn't succeeded and has given up so now it's up to me and I have no clue where to even begin. The modem we have is a Cisco DPC3825 and the router is a NetGear Wireless-N Router WVR2000 V2. Any help would be greatly appreciated.

Denver: I did not actually understand what kind of bridging you want to do?
The modem already has a wireless transmitter. I think you mean the router is picking up the wireless signal and provide the xbox with connectivity via wired cable. is that right?
If correct, It looks like the issue is with the distance/barriers between your modem and router. You need to try to eliminate some barriers in between to get better signl. Try also to put the devices as close as possible to each other.
HTH
Amjad
Rating useful replies is more useful than saying "Thank you"

I need help getting a Novatel Wireless Merlin S720 to work on my G4 PB

I need help with "Sprint Mobile Broadband Card Novatel Wireless Merlin S720.
I have a Mac PowerBook G4 running 10.4.8 as follows:
Machine Name: PowerBook G4
Machine Model: PowerBook3,3
CPU Type: PowerPC G4 (2.1)
Number Of CPUs: 1
CPU Speed: 667 MHz
L2 Cache (per CPU): 256 KB
Memory: 1 GB
Bus Speed: 133 MHz
Boot ROM Version: 4.2.9f1
I was told by a "Sprint PCS Level 2" Tech that if
I got one of the "Sprint" cards that I would have to
set it up on a "Windows" Laptop and then call a
"Sprint PCS Level 2" tech and have them walk me
through setting it up on my PowerBook G4...
I purchased a "PanTech PX500"... set it up on my
"Windows" laptop and called to be told that I should
have purchased a "Novatel S720" and the the "PanTech"
would NOT work in my Powerbook...
I took the "PanTech" back and finally (after of month of looking
for one in a Sprint Store to no avail) ordered on from Sprint's
Tel-Sales unit...
When it arrived I set it up on my "Windows" laptop and called
back to a Sprint Level 2 Tech... I got a tech that was very helpful,
however, was NOT able to get the "Novatel S720" to work... He
told me I should have purchased a "PanTech PX500"!!!
This morning I went to a "Sprint Store" and was told that they had
sold several "Novatel S720's" to Mac owners and suggested that
I keep the "Novatel S720" and even though they could not set it up
on my Mac... they suggested that I call back to another Level 2 tech...
Is there anyone out there that can help me get this working???
Many Thanks In Advance!!!
THX
John

I went to the Sprint Store in St Peters MO and one of the Sprint
Associates told me that she had sold several Sprint cards including
20 or so S720's to a customer of her's..
A large graphics house based in St Louis.
She emailed the Senior VP there and ask that he contact me
if he could/would help...
I received an email from him in less than 4 hours and he
directed me to their in-house tech dept!
I called and talked to the person that he had directed me to
and that person told me that it was a little tricky... You have to do
some modification of the "Code" in the Kernel...
He said if would bring my Mac & the card over the next day
at 10AM it would take him about 10 minutes to get me up and
running!!!
I ask what the charge would be??? He said... "The Boss is a
real Mac Guy... Just Bring it over and we'll get you fixed
up!!! It's a Mac thing!!!"
It works Great!!! I've used it in several areas around the MidWest
and my next road trip will include IN, IL, MO (KC), KY, TN, AL, FL,
GA and SC... That will be the test!!!
I'm finding that I'm able to get on line with the Sprint Card in places
that I don't get very good Sprint PCS Cel service...Must be the
Sprint/NEXTEL combination!
I've been a Mac owner/user/teacher since early '84... It's
GREAT to me a Mac Person!!!
Thanks for your reply and taking the time to help!!!
THX
John

Need Help using WRT54GL as Wireless Bridge for Xbox

Hi.
I need help configuring my WRT54GL as a wireless bridge for my xbox.
I have a Billion BiPAC 7404VGO currently in service as my main router/modem. i.e. I have my ADSL connection and PC connected to this. I also connect to this with a laptop.
I have an original xbox at the other end of the house (cat5 NOT an option).
Basically I want to connect my xbox to the rest of network. I have a WRT54GL I can use for this. I just dont know how to set it up.
The WRT54GL has Firmware Version: v4.30.7 (out of the box).
My Wireless network is using WPA.
I have a VPN setup through to work via the Billion.
The idea is to stream media from my PC to the xbox (media centre).
Any help would be HUGELY appreciated.
Thanks in advance.
Katman

A wireless router is a device which requires its own wired internet connection. A wireless router is not a wireless access point like the Linksys WAPs. A wireless router does not connect wireless to other wireless routers/APs with standard Linksys firmware. With Linksys firmware you need a WAP54G or similar. The WAPs support wireless bridging and repeater mode.
If you already have a WRT54GL then you have to install a 3rd party firmware which adds wireless bridging capabilities. Read the wikipedia article on "WRT54G" for information about which WRT models support 3rd party firmware and an overview of projects and links.
Remember, however, that you may brick your router if you install a 3rd party firmware incorrectly and you probably void the warranty if you install 3rd party firmware (it is even possible to find out after you restore the original Linksys firmware if you don't clear the NVRAM before).

Need network security settings for wireless printer set-up

I have an older airpot extreme base station. I'm trying to set-up my wireless brother printer and it says that I need the following network information:
SSID- I know this one
Authentication Method (open system/shared key/WPA-PSK/WPA2-PSK)
Encription Mode (None/WEP/TKIP/AES/CKIP)
Encryption Key (WEP key/Passphrase)
From what I've found, I believe that I should be using WPA-PSK and TKIP, but what is that passphrase that I'm supposed to use or where can I find out that information?

I am also trying to set up a wireless printer set up. I have an Airport Extreme and a new Brother wireless printer. Sounds perfect, right? Well, I am so confused right now. I bought an Airport Extreme while overseas a bunch of years ago and am now using it in the States. I have no memory of any info such as what is being asked from me to set up wireless printing. I don't remember the wireless security password, authenication method, or either of the Encryption thingies. I don't know where to find this information, whether it be on my computer somewhere or online. Please advise. Plus I don't use any security settings as I live pretty far from other humans in my neighborhood. Does that matter in the big picture?
Please help a girl out!

Wireless MiFi4510L set up...I NEED HELP!

Similar Messages

Maybe you are looking for