Wireless Mighty Mouse/Bluetooth problems

Good day to you all, ladies and gents!
Right, well I have attempted some research on this and it seems that there's quite a few other people that have issues with the Wireless (not so) Mighty Mouse.
Mine keeps cutting out. Basically just clicking and moving it around like a mad hatter reconnects it in a matter of 5 seconds, but it's getting really bad, and I've had this iMac for well over a year, I've only really been noticing it in the last 3/4 months or so...
The upgrade to 10.5.7 didn't sort it out either...
I don't use my bluetooth for much else, just transferring photos from my phone, and that works fine... My Apple remote seems to work fine too..
Sorry if there's already a forum dedicated to this issue, if there is I couldn't find one an I'm a noob!
Thanks!

Hi and Welcome to Apple Discussions ...
How to Clean a Mighty Mouse
Minimize Bluetooth Interference
(I have to keep my TV remote more than 3ft away from my wireless MM, other wise is disables the mouse and TV remote isn't Bluetooth)
Check System Preferences/Keyboard&Mouse and click Bluetooth.
Sometimes just re-pairing the mouse can help
Carolyn
Message was edited by: Carolyn Samit

Similar Messages

Wireless Mighty Mouse - Bluetooth Auto Login?

It is a little pity: whenever i forget to switch on my wireless mighty mouse before starting my macbook i have to go through the bluetooth settings and manually search for the mighty mouse.
isn't it possible to configure the bluetooth settings for my mighty mouse that it automatically logs in whenever it is switched on?
someone might say: why switching the mouse off. i thought it would help the environment by saving batteries. but actually a apple care representative told me you can set the wireless mighty mouse to go in a sleep modus automatically and thus leave it on all the time (so the laser pointer 'window' on the backside is always open). however i couldn't find to set a mouse sleeping mode in the mighty mouse system settings.

closing

Wireless Mighty Mouse Tracking Problem

I'm finding that sometimes my mighty mouse is not tracking downwards.
During these blips it will still tracking left / right and upwards.
When this happens, I can feel that the 'wheel' is not engaging the internal mechanism that drives the scrolling / tracking. After sometime of operation the mouse starts tracking again and I can physically 'feel' that the 'wheel' is engaging the internal mechanism.
Does anyone know if this is a common problem, does hte mouse need to be cleaned inside? Do I need a new one??
Luke

Hi
There are many threads on this but here's Apple's advice:
http://docs.info.apple.com/article.html?artnum=302417
Steve

Wireless Mighty Mouse unresponsive during Bluetooth connection to K800i

Whenever I use Bluetooth to sync my Sony Ericsson K800i with my Mac, I notice that my Wireless Mighty Mouse sometimes becomes slow and unresponsive. I have to switch the mouse off and on again, after switching off Bluetooth on the phone, for the mouse to go back to normal.
I am using a third-party plugin to provide iSync support for this phone, but I don't know if that would make a difference. I never had this issue with my K750i.
Any suggestions would be very welcome!
iMac Core 2 Duo 20" Mac OS X (10.4.8)

The combo update rolls up all the patches Apple has released since 10.5 hit the shelves into one monster download; so you don't need to have installed 10.5.3 to install 10.5.4 - you can go from any version. Some users swear that applying the combo update makes for a more reliable Mac, and it fixed my Mac problem.
But beware the combo is over 1/2 Gb in size and will take a good while to download, even on a DSL connection. You can find it on the Apple downloads page at:
http://www.apple.com/downloads/macosx/apple/
There are separate versions for the regular version of MacOS X and the more specialised server edition, so make sure you download the correct version (most people just need the file named Mac OS X 10.5.4 Combo Update).
Once you've got the update, close any applications you are running (remembering to save your data), double-click the update to start and follow the instructions. You will have to restart your machine at the end of the installation and rebooting may take a little longer than normal - this only happens the first time you restart your machine. Hopefully you'll be back in business as soon as you see the login prompt.
HTH.
Mike.

Bluetooth not working = wireless mighty mouse not working too

I've received an apple wireless mighty mouse from my gf and it's not responding to anything. and my bluetooth icon in the top right of the screen says it's not enable everytime since. So it's surely in my imac the problem. Is there a way i can fix it buy myself or i have to send it to an apple store?
N.B. i have the same problem as the rest of the peps who have the latest update of Leopard

"can you tell my why it says that while 2 weeks ago my WIRELESS mighty mouse
was working and that i was able to go into bluetooth icon and it was active???"
http://docs.info.apple.com/article.html?artnum=86496 Apple Wireless Keyboard and Mouse: Troubleshooting Connection Issues
If the above Article is of no help and DaddyPaycheck does not have any more solutions then I suggest that you cross-post over in the Bluetooth Keyboard/Mouse Forums where the Bluethooth users hang out.

Issues with Bluetooth/Wireless Mighty Mouse since Snow Leopard Install

Hi,
I am having issues with my bluetooth wireless mighty mouse. It was fine after initially having installed Snow Leopard. However, in the past week it has become progressively more and more unresponsive. It functions perfectly normal for the first while after startup, then after a short period of time it becomes slow to respond to the mouse movements that move the cursor. Eventually it gets to the point that moving the mouse results in no cursor movement whatsoever. It also becomes unresponsive to squeezing the side buttons. There are no issues with clicking or scrolling with the track ball.
I have searched the discussion forums to find issues that pertain to "bluetooth" and "wireless mighty mouse" and have tried the following suggested remedies... Repairing my Mouse with my Mac mini. Renaming my mouse. Deleting the com.apple.Bluetooth.plist file from Macintosh HD\Library\Preferences and restarting my Mac. Reset PRAM and NVRAM. Also tried to install Bluetooth Firmware update 2.0.1 but I get an indication that the update is not needed on my Mac mini. I have also checked for software updates but there are none...
I am going to attempt resetting the SMC but am doubtful that this will help...
Can anyone help... Please... ?
Thanks,
Des

I had read in another forum where someone had an understanding that the bluetooth problem had something to do with Airport/Time Capsule. I had also read about how someone was having an issue with being unable to turn off airport. (I had this same problem.)
Upon deleting a few airport related plist files (see below url) I was able to turn off/on airport AND my Mouse issue has no longer appeared... everything is working a-ok now.
http://discussions.apple.com/thread.jspa?messageID=10125976&#10125976

Windows 7 and Wireless Mighty Mouse, Wireless Keyboard and sound problem

Hi,
I just installed Windows 7 x64 Ultimate on my iMac 24" white ( OS X Leopard 10.5 ). Surprisingly, it installed without any problems. The only problems I have now are the Wireless Mighty Mouse and the Wireless Keyboard ( alu ).
After I installed Windows I inserted the Leopard Instal DVD and installed Boot Camp. I got a message right away saying that: "This program has known compatibility issues...". I clicked Run program and continued. Soon I got the same warning, but this time not for Boot Camp, but Intel Chipset Device Software. I clicked Run program yet again and it continued installing. Then I got a different warning: "Service KeyAgent' failed to start. Verify that you have sufficient privileges to start system services." I clicked Ignore and installation continued. I got another "Service Mac HAL' failed to start. Verify that you have sufficient privileges to start system services." warning, clicked Ignore again and after that it finished soon and I restarted the computer.
When I came back into Windows there was no Apple folder anywhere or any sign that I have just installed Boot Camp ( should there be? )
I installed Boot Camp Update 2.1 for Windows XP ( because Vista x64 version wouldn't start ) and basically I got the same warnings I did when I installed Boot Camp from the Leopard DVD ( described above ). I also tried to instal Boot Camp Update 2.2 for Windows, but it didn't start. I also downloaded Bluetooth Update 1.0, but all I got was a message saying: "This update is not intended for this computer and will not be installed.".
There is also no sound.
This is basically it, I really hope some of you who run Windows 7 with wireless keyboards and mice can help me, because I desperately need this to work ( I use a Windows only program for school ).
PS. I have a 2007 iMac 24" white and while it is not on the we're-not-supporting-that list for the infamous Windows 7 Boot Camp update, all other iMacs from its generation are. Any ideas?

Found a solution for the "Boot Camp x64 is unsupported on this computer model" message. Here is the link: http://www.techulous.com/hardware/how-to-apple-boot-camp-64-bit-for-windows-7-on -unsupported-macs.html
Everything works ( for ) now. Yay!

Bluetooth headset disconnects wireless Mighty Mouse

I have a Jabra bluetooth pair of headphones (BT620S) that I use with my Intel iMac. They work great as headphones since they are connecting via A2DP. But they also have the option of being used as a headset, for example with softphones or similar. Only this is useless!
Every time I connect as a headset, my mouse disconnects and the sound result I get is really bad. It's like an inch thick concrete wall is between the headset and the computer, even though I'm sitting immediately in front of it?!
Any ideas? I've tried to unpair and pair both devices again. I also have a wireless Apple keyboard. Thanks!

"can you tell my why it says that while 2 weeks ago my WIRELESS mighty mouse
was working and that i was able to go into bluetooth icon and it was active???"
http://docs.info.apple.com/article.html?artnum=86496 Apple Wireless Keyboard and Mouse: Troubleshooting Connection Issues
If the above Article is of no help and DaddyPaycheck does not have any more solutions then I suggest that you cross-post over in the Bluetooth Keyboard/Mouse Forums where the Bluethooth users hang out.

Wireless Mighty Mouse & No Bluetooth

Hi
Some time back when my MacPro was still in warranty I complained to Apple that my Mighty Mouse wasn't working. They sent me a replacement - a wireless Mighty Mouse. I have no Bluetooth so I complained and they sent me a wired one.
Now I've got to thinking there's times when I could do with getting that wireless mouse to run....
Can anyone explain how to do this? Can I just buy a dongle or some such to stick in a USB port? Or is that not possible with this machine?
Thanks in anticipation
Jim

Hi Kappy - you're right in thinking my MacPro came without - it was a Refurb, so the basic model.
Appreciate your point that some BT to USB adaptors may be better than others, and I'll google for suggestions which might be best for MacPro - had hoped someone here might have knowledge of what works and what doesn't.
Meanwhile I'm 100 miles of Scottish highland roads from the nearest Apple retailer, so I'll see if anything emerges from websearches before I pack it up for the journey!!
thanks for your help
Jim

Bluetooth Wireless Mighty Mouse only detect one button click

I have had my Apple Bluetooth wireless Mighty Mouse for a little over a year and it has just recently began to only detect on button function, and cannot differentiate between left click, right click, or the scroll click.
It behaves slightly differently under different settings. When I have the scroll click set to do ANYTHING, any click on the mouse will do that respective action. When I have the scroll click turned off, and the left is set to primary and right is secondary, it will do the Primary action. When I have the left set to secondary, and the right set to primary, it will still do the Primary action.
I have looked all over the internet and have found very little help. The scroll wheel is fine so I don't really want to have to take it apart and glue it back together. Anybody know any tricks? Anything will help! Thanks!

I found a partial fix over on this thread.
Basically, the fix is to install the shareware program USB Overdrive and set up the buttons via its control panel. Then uninstall it.
In my case, USB Overdrive brings my mouse back to normal operation, but when I uninstall it, my mouse goes back to acting like a one-button mouse.
For now, I'll keep USB Overdrive installed. Maybe I can bill Apple for the $20!

Connect Wireless Mighty Mouse to windows xp pro sp2 on bootcamp

I recently installed windows xp pro sp2 on bootcamp i tried to hook up my Wireless Mighty Mouse and I got basically nowhere. I was able to get the computer to recognize it and i typed in the passkey "0000" and it knows that it is a bluetooth device and I changed the settings of the bluetooth to "always" be discoverable and still I have hit a dead end. I can still not seem to connect the wireless mouse in any way. What do I do???

I FUIGURED IT OUT!!! omg im so happy right now. For anyone who might be wondering I'll tell you how to make it work it you had the same problem. Once you establish the mouse a device, highlight it in the devices menu, then click properties, then services, and once it is done searching check the box for the driver and click apply and your mouse should work.

Does Time Machine Backup irritate wireless Mighty Mouse?

Hi there. I'm having a strange issue here. With an iMac that came with bluetooth mouse and keyboard, OS out of the box (no software updates installed because there's no internet connection), each time Time Machine is backuping files, the Mighty Mouse is acting weird. It actually feels like someone else is working with it. Even if I do not use it and leave it alone, the pointer goes wild on the screen. Trying to work during Time Machine backups is impossible, because I cannot use the Mouse properly.
Does anyone of you have a similar, if not, the same issue? Any ideas?
Thanks in advance,
later, Stephan

I am having a similar problem with my IMac and Time Machine. During wireless Time Machine backups, the wireless mighty mouse and wireless keyboard disconnect. If the mighty mouse remains connected, it moves very slowly and is virtually unusable.
So far I've thought of two potential problems to troubleshoot:
1. I experience this problem when I connect to the Time Machine through the "802.11n (802.11b/g compatible)" wireless connection (set in the AirPort Utility), but I don't experience the same problem when I connect to the Time Machine through a wired ethernet connection. So it appears the b/g compatible setting is causing interference. I haven't tested to see if the "802.11n only" wireless connections causes this problem or not.
2. I also wonder if the IMac does not have enough RAM to complete the wireless backup. My IMac has 2gigs of RAM, and during backups it maxes out. I plan to upgrade to 4 gigs to see if the problem continues. (Stephan, how much RAM to you have installed?)
peace,
Marcus

Wireless Mighty Mouse Sputters During Network activity

Has anyone figured this one out yet.
I have a wireless mighty mouse that when you copy files to or from a computer off a network,
it sputters and barely moves when trying to use it. If i plug in a usb mouse there is no problem at all.
Was using a verizon wireless router and just bought an airport extreme. Guess what. Still does it. When I hard wire my computer to the router all works fine.
I just cant think of what this could possibly be. Any help would be appreciated.
Thanks.

There are a lot of people with this problem - mostly MacBook owners, but probably because they're more likely to have the wireless and BlueTooth running.
I have the problem with a Logitech mouse on a Mac Mini -- cursor goes bonkers at random intervals, with terrible mouse lag, and I basically can't use the mouse when it's happening. It doesn't correlate with anything I can see in the Activity Monitor, but I can stop it if I turn off BOTH Airport and the router.
Not likely to be RF interference with the signals, IMO, but some have reported that switching to an 802.11n router (or 802.11g with b compatibility disabled) solved the problem.

Wired Mighty Mouse vs. Wireless Mighty Mouse

Hey, my wired Mighty Mouse track ball just crapped out on me (I can't scroll down anymore) so I guess I am looking to buy another one.
Does anyone have any experience and/or opinions on the Wireless Mighty Mouse track balls being any more reliable or longer-lasting than the Wired Mighty Mouse track balls? Or are they both pretty much the same quality-wise?
Many thanks.

Trust me, copelander, a mighty mouse that will not scroll in one direction is almost always simply dirty. I have two (one BT one wired) each of which I bought very soon after they first came out. Essentially failure to scroll in one direction means that one of the four directional sensors that it relies on has got clogged.
Cheby (above) describes the usual solution very well. Simply disconnect the mouse, hold it upside down, and rub the ball vigorously in all directions on a clean piece of paper. Try to avoid "running over" any of the tiny black specs that will probably appear on the paper , as the ball is good at picking them up again.
If things have progressed beyond the this, the tip of something like the plastic toothpick that comes with swiss army knives, or a cable tie, worked gently in around the edge of the ball, can help, but be gentle so you don't damage the mechanism. Some people also use a dab of isopropyl alcohol on a clean cloth applied to the ball.
To keep your MM running smoothly for a long period, clean it using the "rubbing on paper" trick AS SOON AS you get the slightest sign of bad scrolling, or every few days, whichever comes sooner. Once you have done this for a while you will find that the problem becomes much less frequent, as the internals get rid of any accumalated residual gunk.
People who smoke, and those whose hands get oily or grubby for one reason or another, seem to have more problems with this issue, and might want to think about a regular 'wheel" mouse instead, but I've found that a minute of preventative maintenance every few days keeps my MM's scrolling beautifully in all directions. I haven't noticed any difference in the behaviour of the wireless or wired models in this respect. They both use the same scroll ball mechanism, so this isn't surprising.
As far as choosing between a wired and a wireless one goes for use with an MBP the wired one is lighter, and probably uses less battery than having bluetooth running all the time. On the other hand, the BT one can be handy if you are working in cramped quarters, and don't want a jumble of wire to deal with.
Cheers
Rod
Message was edited by: Rod Hagen

Wireless keyboard and Wireless Mighty Mouse failure

Hello,
I have just bought an iMac 20" with a wireless keyboard and wireless mighty mouse.
Both the keyboard and mouse will not work properly.
I followed the installation/setup instructions and paired first the keyboard and then mouse. Then the problems started.
1. Mighty Mouse tracking is dreadful and very slow (even after adjusting mouse properties)
2. Keyboard started to drop connection and then when awoke started repeating keys (as if key stuck)
3. Keyboard then disconnected and will not be recognised when searching for Bluetooth devices nor can I pair it again.
4. When both were working the Airport extreme wireless network would be lost (but I think that this is a red-herring and irrelevant)
Interesting once keyboard stopped working the wireless mouse tracking improved.
The only software I have installed since taking the iMac out of the box are (in order)
- Running/installing all Apple updates (including firmware 1.1)
- Installing Firefox 2.0
- Installing Adobe Reader 8.0
- Installing Stuffit Reader 11.0
- Installing Canon Bubble Jet Printer driver
- Installing latest version of Skype
If I use a USB mouse or keyboard they work ok.
This is the second replace imac within 2 weeks. The first had the same problem.
Can anybody help please as I'm new to Mac's after switching from a PC and I do not want to have to chuck either the keyboard or mouse or have the pain of Apple supplying me with a 3rd replacement iMac
Jonathan
iMac 20 Inch Mac OS X (10.4.8)

Welcome to the Apple Discussions. Congrats on the new Mac.
Did you Repair Disk Permissions after the software updates and installs?
Whether this solves this issue for you, it is something that you should always do. Go to Apps/Ut5ilities/Disk Utility and select your OS X HDD. Press Repair Permissions. Run Repair Permissions until no more repairs are reported.

Wireless Mighty Mouse/Bluetooth problems

Similar Messages

Maybe you are looking for