Wireless Mighty Mouse Pointer not moving

Need some advice. My 7 month old IMAC wireless mighty mouse is scrolling fine but does not move the pointer...can someone help? Thanks!

Hi Rich:
That file is located in Macintosh HD>library>preferences. Sometimes (rare, but it happens) preference files become corrupted - causing all sorts of odd behavior.
If that does not help, try resetting the PRAM:
http://support.apple.com/kb/HT1379
If that does not fix the problem, take the mouse to an Apple store or call Applecare and indicate you have a warranty issue. Apple does replace things under warranty at no cost (shipping paid both ways). I have had a mouse and keyboard replaced in the past and was pleased with the service.
Barry
Barry

Similar Messages

Hi i;m using macbook pro . magic mouse pointer not moving, but do all the rest of things

hi i;m using macbook pro . magic mouse pointer not moving, but do all the rest of things

thank you, i have tried you suggestion but it is still just prompting me to restart rather than allowing me to install the os from the os boot disk. the problem began when the macbook was just showing me a folder icon with a question mark on it rather than starting normally. reading through forums lead me to replace the hard drive and hard drive data cable to try and resolve the issue. however, even after having done this the folder with the question mark is still appearing. i cannot get the os istall disk to boot properly. it recognises that the disk is in the drive but continually prompts me to restart and wont allow me to boot from the disk. sorry if my previouse discription wasnt accurate. does this soun familliar and can you help with this more detailed discription of the problem? thank you.

My wireless Mighty Mouse is not working correctly

I purchased a mighty mouse (wireless) for my powerbook G4, and it doesnt work anymore, i mean it works to use as a cursour but the scroll doesnt work and most of the time the right click button doesnt work, it used to work fine then it just slowly died down to where it isnt able to be used anymore, for an APPLE tech my order number is: W21988486, if you can let me know what to do if i can request an exchange for a working mouse or should i visit the local Apple store? thanks -Daniel ([email protected])

It looks like most of the problems seem to be with OSX 10.4+ as mine with 10.3.9 works fine. However, at one time I had the mouse pointer move, but the left click not working. All it took was two new batteries... all the functions (10.3.9 lets me have) came back. Scroll, left and right clicks.
I did test the batteries with a meter that were removed and they had 1.2 volt left in them of the 1.6+ that a new one has. So, my guess is that this little mouse is sensitive to a little power drop, less then I would of guessed.

Wireless Mighty Mouse has stopped selecting, cutting or pasting

My batteries ran out two days ago. I changed the batteries but since then my wireless Mighty Mouse will not select text, cut or paste. It has other erratic behavior. Any help and advice welcomed.

Sending back to Apple. Free refund.

Mysterious moving wireless mighty mouse...

I've noticed that my wireless mighty mouse, although sitting quietly on the desk, appears to be moving the onscreen pointer around the screen. This has been interfering with my use of TextExpander which I use to expand text snippets, so suggests that there's something wrong with the way the wireless mighty mouse is responding to being at rest. I've gone over to using a wired mighty mouse and don't see this behaviour. Anyone else getting this?
Should I just give the mouse to my cat? Or should I phone Apple?

Try taking the battery out of the mouse and putting them back in. Also, make sure nothing is blocking the LED.
Are you able to use your iMac with a regular wired mouse? In other words, if you use another mouse, does it function normally?
Otherwise (if the above is not helpful), it seems likely that the mouse is defective. You should take it back (or to an Apple Store) for replacement under warranty.

My Magic Mouse is not moving the pointer on the screen but it allows me to scroll up and down by sliding my fingers on the mouse.

My Magic Mouse is not moving the pointer on screen. However, it is allowing me to scroll text up and down by dragging my fingers on the mouse. How can I recover full use? I am using a MacBook Pro with Mavericks. All indications are that the mouse is connected through the Bluetooth connection and the batteries have significant life in them.

Have you tried this:
http://support.apple.com/kb/TS3048?viewlocale=en_US&locale=en_US#7
Mouse does not track as expected (jittery, jumpy, slow, fast).
The Apple Wireless Mouse can be used on most smooth surfaces, however if tracking issues occur try these options:
Choose System Preferences from the Apple () menu, then choose Mouse from the View menu. Set the Tracking slider to adjust how fast the pointer moves as you move the mouse.
Try using a different surface to see if the tracking improves.
Turn the mouse over and inspect the sensor window. Use compressed air to gently clean the sensor window if dust or debris is present.
If multiple Bluetooth wireless devices are in use nearby, try turning them off one at a time to see if the issue improves. Bandwidth intensive devices could affect tracking.

Apple Wireless Mighty Mouse internal speaker not working !!!

Recently I bought an used Wireless Mighty Mouse (first version with grey side buttons), the mouse is working perfectly minus the single little detail that I can not hear any clicking sound from the internal tiny speaker inside the mouse when I use the little scroll ball above the mouse or when I press the grey side buttons, is this normal or should I hear the clicking sound simulated by the internal speaker? is there a way to enable or disable the internal speaker by software? Maybe is disabled by default, I don't know. I really don't think the speaker could be damaged due to the rest of the mouse is working like a charm but maybe mine came without a speaker, could be? or maybe it got disconnected somehow. Any clues or ideas would be very helpful. Thanks !

I know what a microswitch is, please look at these links, here are the proof there is (or maybe there was) a tiny speaker in some mighty mouse and wireless mighty mouse:
http://arstechnica.com/uncategorized/2005/08/dissect/
and this:
https://discussions.apple.com/message/988965#988965
and this:
https://discussions.apple.com/message/1429358#1429358
and this:
http://www.youtube.com/watch?v=OOw04wTtlIo
and this:
http://macdailynews.com/2005/08/02/apples_new_mighty_mouse_provides_audio_feedba ck_for_clicking_and_scrolling/
and I can keep giving you tens of links to proof you that actually there is (or maybe there was) a tiny speaker inside the mighty mouse and the wireless mighty mouse, If yours came without one it doesn't necessarily mean all came without one, right? That is why I asked you what version you have in order to figure out which ones does have the speaker and which one doesn't.

Bluetooth not working = wireless mighty mouse not working too

I've received an apple wireless mighty mouse from my gf and it's not responding to anything. and my bluetooth icon in the top right of the screen says it's not enable everytime since. So it's surely in my imac the problem. Is there a way i can fix it buy myself or i have to send it to an apple store?
N.B. i have the same problem as the rest of the peps who have the latest update of Leopard

"can you tell my why it says that while 2 weeks ago my WIRELESS mighty mouse
was working and that i was able to go into bluetooth icon and it was active???"
http://docs.info.apple.com/article.html?artnum=86496 Apple Wireless Keyboard and Mouse: Troubleshooting Connection Issues
If the above Article is of no help and DaddyPaycheck does not have any more solutions then I suggest that you cross-post over in the Bluetooth Keyboard/Mouse Forums where the Bluethooth users hang out.

Apple wireless Mighty Mouse not working in Windows XP Pro/Boot Camp

I was able to get Windows XP Pro to install successfully on my new iMac, but I can only get a wired Microsoft USB mouse to work with it. When I boot to WinXP with just my wireless Mighty Mouse, the wireless mouse is completely unresponsive. Has anyone else experienced this, and is there a solution? Thanks!

Why not post in the Boot camp forum:
http://discussions.apple.com/category.jspa?categoryID=237

Wireless Mighty Mouse Right Button does not work well

Recently I bought in Online Apple Store a Wireless Mighty Mouse.
I installed the drivers that came in the CD, and, I defined in the System Preferences the second button of the mouse (the Right Button) to function as the Secondary Button.
But after the computer going to sleep and I wakes it up, or I stop a little to work with the Mouse, or then without none apparent reason, the Right Button behaves as the Left Button, like if it had one and only button in the Mouse.
To solve the problem I have to disconnect the mouse and/or the bluetooth connection, so that the Right Button functions again as I defined it in the System Preferences like a Secondary Button. But I think that is not the solution for who needs a mouse to work.
Therefore, I thank you a solution to solve this problem.
Sincerely,
Paulo
The computers where I worked with this Wireless Mighty Mouse and where I had this problem was:
- a PowerBook 12", 1.5GHz
- and a MacBook Pro 15", 1.83GHz
- both with MacOS 10.4.8
(Sorry for my bad english)

There are a few threads going describing this problem Discussions. (E.g., check out this one.)
It appears that there's probably a hardware QC issue with some fraction of the wireless Mighty Mice. Replacing the bad mouse -- either at a local Apple Store or via AppleCare online -- is what I'd suggest. (That's what I ended up doing and the replacement mouse has been fine.)
Intel Mini 1.66 GHz, Mac Pro 2.66 GHz Mac OS X (10.4.7)

Issues with Bluetooth/Wireless Mighty Mouse since Snow Leopard Install

Hi,
I am having issues with my bluetooth wireless mighty mouse. It was fine after initially having installed Snow Leopard. However, in the past week it has become progressively more and more unresponsive. It functions perfectly normal for the first while after startup, then after a short period of time it becomes slow to respond to the mouse movements that move the cursor. Eventually it gets to the point that moving the mouse results in no cursor movement whatsoever. It also becomes unresponsive to squeezing the side buttons. There are no issues with clicking or scrolling with the track ball.
I have searched the discussion forums to find issues that pertain to "bluetooth" and "wireless mighty mouse" and have tried the following suggested remedies... Repairing my Mouse with my Mac mini. Renaming my mouse. Deleting the com.apple.Bluetooth.plist file from Macintosh HD\Library\Preferences and restarting my Mac. Reset PRAM and NVRAM. Also tried to install Bluetooth Firmware update 2.0.1 but I get an indication that the update is not needed on my Mac mini. I have also checked for software updates but there are none...
I am going to attempt resetting the SMC but am doubtful that this will help...
Can anyone help... Please... ?
Thanks,
Des

I had read in another forum where someone had an understanding that the bluetooth problem had something to do with Airport/Time Capsule. I had also read about how someone was having an issue with being unable to turn off airport. (I had this same problem.)
Upon deleting a few airport related plist files (see below url) I was able to turn off/on airport AND my Mouse issue has no longer appeared... everything is working a-ok now.
http://discussions.apple.com/thread.jspa?messageID=10125976&#10125976

Does Time Machine Backup irritate wireless Mighty Mouse?

Hi there. I'm having a strange issue here. With an iMac that came with bluetooth mouse and keyboard, OS out of the box (no software updates installed because there's no internet connection), each time Time Machine is backuping files, the Mighty Mouse is acting weird. It actually feels like someone else is working with it. Even if I do not use it and leave it alone, the pointer goes wild on the screen. Trying to work during Time Machine backups is impossible, because I cannot use the Mouse properly.
Does anyone of you have a similar, if not, the same issue? Any ideas?
Thanks in advance,
later, Stephan

I am having a similar problem with my IMac and Time Machine. During wireless Time Machine backups, the wireless mighty mouse and wireless keyboard disconnect. If the mighty mouse remains connected, it moves very slowly and is virtually unusable.
So far I've thought of two potential problems to troubleshoot:
1. I experience this problem when I connect to the Time Machine through the "802.11n (802.11b/g compatible)" wireless connection (set in the AirPort Utility), but I don't experience the same problem when I connect to the Time Machine through a wired ethernet connection. So it appears the b/g compatible setting is causing interference. I haven't tested to see if the "802.11n only" wireless connections causes this problem or not.
2. I also wonder if the IMac does not have enough RAM to complete the wireless backup. My IMac has 2gigs of RAM, and during backups it maxes out. I plan to upgrade to 4 gigs to see if the problem continues. (Stephan, how much RAM to you have installed?)
peace,
Marcus

Wireless Mighty Mouse on Windows PC (one last time). Any luck?

Anyone with any luck trying to pair a wireless Mighty Mouse with a Windows PC?
I'm trying to get the wireless Mighty Mouse to work on a PC (not a Mac with Boot Camp). I thought it should have been easy enough since I have other Bluetooth devices that work fine. I know that topic has been discussed before but I haven't come across anything definitive that shows a way to get it to work. Would someone please point me in the right direction. If not I'll be returning it for the wired Mighty Mouse.
As it stands now my Bluetooth software recognizes the Mighty Mouse but it can't pair it. I'm pretty sure it's a Bluetooth software issue. Your thought? Thanks.

I've installed 'Bluetooth Stack for Windows by Toshiba' to pair my bluetooth headset with XP to get music from iTunes. It's working great.
I've just tried to pair the Mighthy Mouse with XP and it's working!!!
Link: http://aps.toshiba-tro.de/bluetooth/pages/download.php
Message was edited by: Henk Puister

Wireless Mighty Mouse & No Bluetooth

Hi
Some time back when my MacPro was still in warranty I complained to Apple that my Mighty Mouse wasn't working. They sent me a replacement - a wireless Mighty Mouse. I have no Bluetooth so I complained and they sent me a wired one.
Now I've got to thinking there's times when I could do with getting that wireless mouse to run....
Can anyone explain how to do this? Can I just buy a dongle or some such to stick in a USB port? Or is that not possible with this machine?
Thanks in anticipation
Jim

Hi Kappy - you're right in thinking my MacPro came without - it was a Refurb, so the basic model.
Appreciate your point that some BT to USB adaptors may be better than others, and I'll google for suggestions which might be best for MacPro - had hoped someone here might have knowledge of what works and what doesn't.
Meanwhile I'm 100 miles of Scottish highland roads from the nearest Apple retailer, so I'll see if anything emerges from websearches before I pack it up for the journey!!
thanks for your help
Jim

Wireless Mighty Mouse Looses Right Click Functionality

I am using a new Wireless Mighty Mouse (about one month old) With new batteries.
Since I started using it, the (secondary) right click would stop function after repeated use. After many frustrating trouble shooting attempts, I discovered that the Right Click will work again if the mouse is left idle for about 15 - 20 minutes.
I will like to know if this is a defect that's inherent in the Mighty Mouse system, and if so, has anyone found a solution to this problem or is there a fix?
Any input would be very much appreciated
Mac G5. 2ghz DP Mac OS X (10.4.8)
Mac G5. 2ghz DP Mac OS X (10.4.6)

Unfortunately my experience suggests no. I'm on my 5th (or is it 6th?) wireless Mighty Mouse now, and they've all behaved just as you described. The latest replacement was only a week ago. I suspect the only point in replacing it further times would be to demonstrate that you've tried all you can. As far as I can tell, my only recourse at this point is convincing Apple to refund me, which is a shame because I like the scroll ball design.
I should note that I'm in Australia, in case stock has been slower to update here, but it shouldn't make a difference...
I've noticed that the problem seems to occur a lot more frequently under hot conditions - room heater on, hot hands etc. Could it still think the left button is being touched because it's warm and/or sweatier than usual?

Wireless Mighty Mouse Pointer not moving

Similar Messages

Maybe you are looking for