Wireless Modem and Airport Express USB Printer

I am already connected to the internet via a wireless modem provided by my ISP. The connection uses Airport. I just purchased an Airport Express to connect my computer to a printer through the USB port. However, I can't get the airport utility to connect to the Airport Express solely for the purpose of connecting to the printer. I have tried to make the new aiport express both a new network and part of an existing wireless network with no sucess. I sitll have a flashing yellow light on my Airport Express. I have not connected the wireless modem to the Airport Express. Do I have to connect the airport express to the modem? Help!
iBookG4 Mac OS X (10.3.9)
iBookG4 Mac OS X (10.3.9)
iBookG4 Mac OS X (10.3.9)

Hi Andrew Otis:
Welcome to Apple Discussions!
You'll need to configure your AE via the Airport Admin Utility to Join an Existing Wireless Network, then select the name of your network in the drop down box or enter it EXACTLY as the SSID is broadcasting your network Name. You may also have to configure wireless security if you wireless modem has that enabled.
I hope this helps!

Similar Messages

Connecting wireless modem and airport express

I currently run internet with an old Motoirola Sideboard cable modem and Airport Express - previous version. All runs well. Now my Optus provider has upgraded my service with a Premium account for higher speed. They have also given me a free wi fi Cisco modem - DPQ3925. How can I replace my old Motorola modem and still maintain Air play etc with my new modem using Airport Express. I need to know exactly wire per wire help - please, if possible - Thanks
Mac

Hi - I have a similar issue.
I have a new macbook pro, ATV (3rd Gen) and AXn (purely for Airplay of itunes).
All three are wirelessly connected to my HG556a Huawei WiFi Router.
The Macbook pro and ATV work fine and can see each other for airplay mirroring and itunes.
The AX connects and comes up in Airport Utility (AU) and itunes shortly after you turn it on, but if you either dont use it or stop using it and switch to ATV or whatever it dissapears from itunes and AU says it cant find it. Randomly the light on the AX stays green the whole time.
I have to switch the AX off and on to get it back working again (i.e. itunes and AU can see it).
Following other forum posts I've set the AX up by hard connecting it to my router, setting a static iP and reserving ports 5353 and 3689 to that address. I've also turned off ipv6 or whatever using the networksettings Terminal code string. I have also repaired permissions with disk utility!
It still dissapears from available options in iTunes and AU. ideas?

Wireless modem and Airport Express.. one at a time

Recently my internet provider upgraded my old plug in modem to a newer wireless model. Now it seems that the current setting allow communication with only one or the other at the same time. If I want to be online with the wireless modem and send my iTunes music via Airport Express to my sound system, no dice. I have to either click on the modem up in the Airport choices to be online and listen to iTunes through the computer speakers, or go offline to listen to music through the sound system and Airport Express.
I'm sure I'm just missing something in preferences or settings somewhere.
Can someone point me in the right direction?
Thanks, and Happy New Year!

No ideas?

Belkin wireless modem and Airport Express lan problems

Let me preface my problem by stating the obvious - I'm not very technically proficient!
That said, I've had an AirPort Express wireless lan connecting three computers on my home/office network for the past 8 months without any problems at all. All machines on the network have been able to access the internet via a Thomson SpeedTouch 530 ADSL1 modem that connects via an ethernet cable to the AirPort Express. No problems.
The network consists of my G5 iMac (ALS), my husband's Mac mini and my Sony VAIO laptop (XP Pro SP2).
I should also mention that half-way between my office and my husband's office there is a second AirPort Express that 'boosts' the signal to his office.
I recently changed ISPs to a provider that offers the faster ADSL2+ service. This meant that I had to get a new Belkin ADSL2+ modem. This is my problem. I cannot connect my AirPort Express network to the internet using the Belkin modem. The Belkin modem connects without any problem if I just have it connected via ethernet to my iMac but that's not what I want to do.
My existing AirPort details are -
IPv4 Address: 10.0.1.3
Router 10.0.1.1 (this is the SpeedTouch 530 modem)
Subnet Mask 255.255.255.0
I thought I could change the new modem's address(?terminology?) from 10.1.1.1 (which is how it came) to 10.0.1.3 and that everything would work but it doesn't.
Belkin tech support said 'the problem is with your AirPort Express' (what else would they say)?
Do I have to keep the 10.1.1.1 and change my AirPort addresses? Or should I try to set up a new network?
2GHz 20-inch iMac G5 (ALS) Mac OS X (10.4.4) Mac Mini; 12inch PowerBook; 120GB external firewire hd; Video iPod; iPod mini;

No ideas?

Can an Airport extend a wireless network and support a USB printer at the same time?

Can an Airport extend a wireless network and support a USB printer at the same time?

Yes, if the AirPort Express is extending the wireless signal produced by another Apple router. The Express cannot wirelessly extend a network produced by a non-Apple router.
In addition to extending the network and connecting a printer, AirPlay can also be enabled on the AirPort Express, with all services operating simultaneously.
Please note that only the print function will work if you connect an All-in-One type device to the USB port on the Express. Advanced features like copy, scan, mainentance, etc are not supported when an All-in-One device is connected to the USB port on an AirPort router.

Printing from iPad to airport express USB printer

Printing from iPad to airport express USB printer

mdurwin wrote:
Exactly my point: it's not a problem of not having the right printer, it's a matter of iOS not allowing it because Air Print is blocking it, probably because of a deal with HP.
But, I've solved the problem so now I can print from my iMac, my Mac Air, my iPhone and my iPad. No thanks to the folks at Apple who purposely blocked that functionality.
Can you print from your iPad directly to the printer without involving an intervening computer, yes or no.

Wireless Broadband and Airport Express

Where I used to live I had ATT DSL and used my Airport Express to provide a wireless network and the use of my non-networked Samsung printer. My new address won't have DSL or Cable--but there is Verizon wireless broadband. Is there a way I can more or less duplicate what I had with the DSL and the Airport Express? I sure would like to be about to print without having to physically attach the USB printer cable to my MacBook? Thanks in advance for any suggestions.

Hello,
The idea behind the Cradlepoint CBA250 adapter (which I have not tested) is to create an Ethernet output from a USB (or ExpressCard) modem or a mobile phone. This combination would thus effectively replace a DSL modem that has been connected to a WAN port of a wireless base station. If your AirPort Express was used as a base station, and was working with a USB printer earlier (much like this), everything ought to be as before.
Jan

Wireless modem and airport extreme

Hi. I recently bought airport extreme with the intention of using it to provide wireless access to my external hard drive and printer.
I have a netcomm nb5plus4w modem router which is connected to my broadband and currently provides wireless internet to our laptop.
I am wanting to connect the airport extreme to this current network wirelessly. Is this possible, or will I need to purchase an ethernet cable to connect my modem to the airport extreme??
I just attempted to connect it, and then had all sorts of trouble getting my modem back running with my isp.
Please use as simple language as possible. While I am the techno chick in my marriage, I am by no means proficient in the gobbledeygook language!!!!
Cheers.
i hope I have given enough info.

I am wanting to connect the airport extreme to this current network wirelessly. Is this possible, or will I need to purchase an ethernet cable to connect my modem to the airport extreme??
Sorry, but unlike the AirPort Express Base Station (AX) or the Time Capsule (TC), you will not be able to "join" an existing wireless network with the 802.11n AirPort Extreme Base Station (AEBSn) wirelessly to share USB drives/printers.
Since the router you are trying to connect to is not another AirPort, you will have to connect the two (as you suggested) with an Ethernet cable for sharing.

Airport Express USB printing suddenly not working

Hi, we have an airport express which doesn't seem to be working properly. We've had it at least 2 years now. All has been working fine but suddenly USB printing is not working on it. When I load up AirPort utility and go to the printers tab, it says "USB printers: None". It didn't use to say that! I've checked the printer - it works fine when printing direct from computer to printer over USB (hence both the printer and the USB lead are fine). We use the airport express for iTunes and it works fine. The airport is running version 6.3. We used to print (when it worked) from both Windows computers running XP and from macs running Snow Leopard...
Any thoughts?
Edward

Erm... help!
In a bid to try to sort out the problem myself, I decided to restore the Airport Express (b/g) to the factory default and see if that helped... I did this through the airport utility. The airport reset fine and I then went through the set-up wizard. However, when it then tried to restart as part of the setup process, it said that there was an error and that it could not restart. It said to restart the airport utility and try again. This I did but it cannot see the airport. If I rescan, it says the same thing (unable to find any apple wireless devices). What should I do?
All thoughts and suggestions gratefully received!
Edward

Vonage between cable modem and Airport Express is a problem

I have my Comcast cable modem connected via Ethernet to the Vonage box which is connected via Ethernet cable to my Airport Express. When I try to connect wirelessly via my Powerbook it's a crapshoot whether or not I can connect to the internet. Mostly the quality is very poor if you can connect at all. If I cut the Vonage out of the equation hooking the cable modem to the Airport Express it works perfect. So Vonage is my problem and I need to change some settings either with my computer or my Airport Express, but which ones? I've been given several different ideas from the information I've sifted through (i.e. change the DNS, change the sharing prefs, get a hard wired router). Oddly enough an old HP computer I have in the basement connected to the internet via another Airport Express has no problems with connection at all. If someone could let me know which of these fixes I am preparing to try would work the best I would appreciate it.

Interesting. So you have two Airport Express devices configured into a WDS, with the one upstairs functioning as the main base station and the one downstairs functioning as a remote base station. And your PC downstairs connected to the remote base station has no problems connecting to the internet. Is that PC cabled to the Airport Express, or does it connect wirelessly to the remote Airport Express?
What happens if you bring the Powerbook downstairs to where the PC now resides. Does the Powerbook then get the same great internet connection as the PC?

Airtunes, Wireless Speakers and Airport Express: A Reality?

Hi all,
I have an Airport Extreme Base Station that I use to wirelessly connect my iMac and pc to the internet and a common printer. Last week, I purchased the Airport Express (AE) to allow for me to play the music from my iTunes library (on the iMac) on some speakers in my backyard during a party. I wound up purchasing some decent computer speakers and connected them to the AE vis-a-vis a 3.5mm stero jack.
Ideally, I want to purchase some really good, wireless outdoor speakers, but I do not know how I would be able to utilize the AE in conjunction with a wireless speaker system. Again, my understanding is that a 3.5 mm stereo jack connecting the speakers to the AE is required to enable Airtunes to play via the AE.
Can anyone suggest a way that I can get Airtunes to play through the AE over wireless speakers without the stereo jack? Are there any wireless speakers that include a subwoofer that would connect to the AE via the 3.5mm stereo jack and then transmit to the speakers via bluetooth?
Thanks in advance for any help!

^^ Thanks, Duane. But how about a situation where the wireless speakers are equipped with a receiver: theoretically, could I attach the receiver to the AE via the 3.5 mm stereo jack and then place the wireless speakers anywhere I desired (within the range of the receiver, of course)?

Airport Express USB Printer Visible, but Not Printing

I've connected my printer (HPc7260) to my Airport Express. It is visible on the network. But print jobs get stopped and the print utility says the printer is offline.
Any thoughts?
+This question is also posted in follow up to a thread I started earlier, which was answered helpfully by Duane (thread: How Setup Airport Express for Wireless Printing to HP Photosmart C7280) Sorry for redundancy and clutter. I hadn't followed up on the old thread for a few days. Thought it might not get another response.+

Solved.
A restart, followed by reselecting the printer in the print dialog got the job done.

Help needed with router setup. Bigpond wireless gateway and Airport Express

Now I know this is probably more a router question but it is to help my iPad wifi so heres what I have.
ADSL2+ line in
Bigponds Thomson TG782T Modem/router which is /b/g
Airport Express /b/g/n
I am trying to set it up for maximum speed so basically I am trying to take advantage of the AE's /n.
I was hoping to use the Thomson as just a modem and use the AE as the router. Please correct me if this isnt the 'best way of doing it'. Can someone savvy give me a few pointers, would be greatly appreciated. cheers

Chris CA wrote:
You can download the user manual here (scroll down to Support) -> http://bc.whirlpool.net.au/bc/hardware/?action=hview&modelid=897
This screen is where you disable the Wireless Access Point. (ignore the red arrows - they aren't mine)
Uncheck *Interface Enabled* at top.
@Chris........ Thanks for that..... yes I disable it. So much for Bigpond telling me it couldnt be turned off. I have the system up and running /n 5ghz multicast 5.5. iPad not fluctuating signal strength as much and loading a bit quicker. I think turning off the 2.4 running on the Thomson made a difference when running from the AES at 2.4 but much better with Thomson off and AES on 5ghz. So all up I am doing better thank you.

Using TimeCapsule with a Comcast modem AND Airport Express. Way slower after updates! What's up?

I've been running this set up for two years now without a hitch. Comcast Modem to TimeCapsule by Ethernet. Then TimeCapsule to Airport Express via WiFi. It used to work great because my TC was far away from my family room and the AE extended my network flawlessly.
After Mavericks and IOS 7.06 installations on my devices (iMac, Macbook Air, iPhone, and iPad) my wifi seems to be moving at half speed. I've rebooted the Comcast Modem and TimeCapsule. I guess I should reboot airport express as well. But I doubt thats the problem. I was thinking of asking Comcast to change out Modems but this is a new problem only since updates. What should I do?
Any ideas?
Thanks
Marylyn

Power off the entire network.....all devices....computers, printers, modem, TC, mobile devices, etc
Wait a few minutes
Start the modem first, and let it run a few minutes by itself
Start the TC next and let it run a full minute
Keep starting devices one a time about a minute apart until the entire network is powered back up
Check the network

Can I use Ethernet for Internet connection and Airport express for printer

How / can I use Ethernet for Internet connection and use an airport express to set up wifi for printer and Apple TV?
Macbook Pro. OS X 10.9.4

I've never tried it, so I don't know what the results will be.
However, you can move Ethernet to the top of the Services list in Network System Prefs which will cause it to be the Internet source. There is a command in the gear menu to set the Service order. However, after thinking about it, if there isn't an internet connection via Wi-Fi, it might automatically drop down to the Ethernet connection.
Then, you can set up your Wi-Fi so that it doesn't connect to the Internet, as Linc stated. How to do that would be dependent on the Router.

Wireless Modem and Airport Express USB Printer

Similar Messages

Maybe you are looking for