Wireless modem disconnecting after 10 minutes consecutively...

My wireless modem is disconnecting after every 10 minutes...I just replaced the modem and cable so it is not that.
It shows as a Ethernet port connection...it is plugged into a USB port.
Help

Interesting. I have a Macbook pro 17" and although all is fine using either of the 2 usb ports on the left, my external modem is either very slow or disconnects for no reason when I use the usb port on the right.
I think it may have occurred after I upgraded to 10.4.7 also.

Similar Messages

  • My wireless mouse disconnects after a long sleep, and only rebooting machine makes it come back.

    My wireless mouse disconnects after a long sleep time, always overnight, and pushing buttons, replacing batteries, etc. doesn't wake it up again.  I have to reboot the machine, sometimes losing data, in order to make it work again.  I am kinda new to mac, so hopefully I am just missing something easy.

    Maybe something here will help:
    https://discussions.apple.com/message/15090955#15090955
    Regards,
    Captfred

  • Apple USB modem disconnects after a few hours??

    I bought an imac G5 -- it came without a modem. (After a false start), we bought the Apple USB modem. Now we want to upgrade the operating system, either with Safari or with "Software Update". It tells us we need Mac OS X Update to 10.4.3, and it is 97.0 MB.
    We have a fairly slow dial-up connection -- always have, so we usually download large files like these overnight. But our Apple USB Modem won't let us - perhaps it is too unstable. After 6 or 7 hours we get disconnected. (It says we need 8 or 9 hours to download the file). Our main problem is that we can't stay connected for more than 7 hours.
    I've made sure under the Network Preferences, for external modem, the Prompt every xx minutes to maintain connection, and Disconnect if idle for xx minutes, are both unchecked. I've turned off the screensaver. I make sure I move the mouse and a window every hour or so. I've phoned my ISP, and they deny a time-limit. I've tried not breating heavy near the computer.
    What else can I do? I've always been able to stay on line over-night for download with my old computer/modem, but not with this one. I've tied at least 4 times. Is there something wrong with the Apple USB Modem?
    Also, when I tried with Safari, and the modem disconnects, I thought I could just re-log on and start downloading where I left off -- but no. Every time I click the "resume downloading" circle next to the update in the download window, it starts from the beginning. -- it doesn't resume where it left off!
    That is the most frustrating part about this -- I've downloaded the first half of the file a half-dozen times, and no matter if I use Safari or Software Update, I can't get the computer to remember the hours of work it just did and simply continue downloading from where it left off. If I could just solve that issue, I could get the system update downloaded.
    If we don't solve this, we will never be able update any apple software with large files. Thanks for your help.
    Francis

    it's a 3.5 hour round trip to the closest Mac store.
    I just want my modem to work right -- the first time. Actually, this is the third modem I've bought (all on-line since I have no mac store close). The first USB modem didn't have a mac driver. The next bluetooth modem said it was mac compatable, but when it arrived, it was only capatable with os9. So I get a modem right from Apple, and darn, I just want it all to work now. I'm tired of foolin around. Why wasn't there an internal modem anyway?
    My old modems and macs could download overnight. All I want is for it to be as good as the old stuff.

  • Modem disconnection after certain time

    I am using my nokia phone for getting Internet connection to my computer. As you know the phone acts as modem. The modem gets disconnected when the time reach 2 hours. It disconnects automatically when it is 2 hours. I had tried in different sim card and different settings etc  but the result is same. I tried installing latest PC suite and nokia OVI suite but the result is same. The modem automatically disconnects when it is 2 hours. I can't find a way to extend the time limit. I called sim card support, but they are not able to get the exact reason. When the connection is established in the phone using wap, it stays long for more than 14 hours. But when it acts as modem it correctly disconnects when the time is 2 hours. Please help to to increase the time limit of modem connection. I am using windows 7 32 bit. My phone software is up to date and I had tried after restoring the phone to factory settings also. I want to know how to adjust the time limit of the modem to stay connected for long. How to change the time limit for modem connection in the computer?
    Thank you.

    Hi again:
    (Chuckling at myself), that is very true!
    As you know, you can tell the computer to shut down on a schedule (energy saver), but I do not know of anything that would do what you want.
    Barry
    P.S. I hunted a bit, but could not find anything relevant (other posts).

  • USB Modem 21M-02 disconnects after 20 sec

    Hi,
    I have the problem with my newly bought Nokia USB Modem 21M-02. When I try to use it with Play operator (260-06) in Poland (I try 3 different SIM cards) modem disconnects after about 20 second after plugging it into USB. During this short period I can connect with it to Internet, send/receive SMS, browse phone book. Then after about 20 seconds it disconnects, the  signaling diode becomes red fast flashing, communication with modem is not possible. I checked this modem with different computers with Windows XP, Windows Vista and MacOS and problem doesn't disappear. What is interesting the problem disappear if I change SIM card to any provided by other operator. So there is no problem with Aero2, Plus, T-mobile.
    Any advice? Please help.
    Is there any possibility to update firmware? Currently there is M1.7.0.
    Przemo

    I have the same problem, but I'm using Cisco UCME 9.1
    Jabber for iPhone version is 9.1.2.21344
    Disconnects exactly after 8 seconds.
    Please help somebody!

  • FIOS and Wireless Connection Disconnecting

    I now have Verizon FIOS and only on my MacBook Pro the wireless keeps disconnecting after 5 minutes of inactivity. I tried testing connectivity on a Windows laptop and on an iPad and there are no issues.  I called VZ and they said this is an Apple Macbook issue as they ran diagnostics and all the tests and configurations were all set correctly.  Does anyone else have this issue and is there any solution?
    Thanks.

    greener wrote:
    so I just got the blazing fast Fios last week and love everything about it except about 50% of the time I need to restart my laptop (which is hooked up wireless) in order to connect.  When I initially connect it shows that it is connected but cannot receive anything in a browser.  The remedy is a restart.  but I only need to do this about 50% of the time.
    Interestly,  If I am having problems and cannot connect I can still receive a skype ping (but cannot browse to any pages using FF or IE)
    I called tech support and they were very nice but did not solve.
    Anyone else with this?
    rg
    Sounds like an issue on your laptop.  Can you ping anything outbound?  It sound like the DNS on your laptop is not connecting properly, or the network arp cache is hosed.  If you're using XP or Vista you should be able to "repair" the network connection without having to restart the laptop -- this is essentially what a restart will do for you relative to network issues without having to restart.  Right click on the network icon in the right toolbar area and select Diagnose and Repair. 

  • My Airport Extreme Disconnects From the Cable MoDem Every Few Minutes

    Hello,
    I start a new topic as my previous title was wrong and there was no suitable answer.
    I have had an Airport Extreme for 3 years and it sometimes disconnects after a few minutes. Actually, it more looks like that the Airport crashes: the "PC Link" light on the cable modem goes off, the Airport lights go off and I cannot find my Airport Network any more on my computer.
    When this happens, I can either unplug it from the power and plug it back in, or simply move the Airport around a little bit, and it will re-start. Sometimes the problem does not re-occur for a few hours or days, sometimes it keeps happening every few minutes and of course drives me crazy...
    Is it because ... :
    - ... my Airport has a faulty connection and I should replace it?
    - ... there are power surges in my electricity installation (eg this seems to happen when I or my neighbors have air conditioners on, I live in one of those old New York buildings with old electricity installations), and I should get an anti-surge device, or a newer Airport would deal with this better?
    - ... of something else? I tried replacing the Ethernet cable between the MoDem and the Airport and it failed, there does not seem to be a source of interference around my place.
    Thanks for your help!

    I have had similar problems. Not as bad as some of you but usually in the morning I discover that I have dropped onto someone elses wireless they are not as fast. Then I have to troop upstairs, unplug the Extreme, replug it and then everything is allright until the next morning. But it is sporadic. It has run fine now for a few days. This problem has persisted now for a year. And yes I have tried resetting it.
    Next month I plan on going to the big city and I am going to take my Extreme to one of Genius' at the Apple Store. I am curious if anybody else has tried that solution and how much it might cost.

  • IChat disconnects after 12 minutes.

    Don't know what is going on, iChat opens fine, it disconnects after 12 minutes and it will not reconnect. Does any one know what I can do to solve this problem?

    Hi,
    What is the time the Modem or router says it is using ?
    Some devices say 24 Hours and as long at the Computer is on again before it is up it keeps the IP.
    Others like an Airport say 4 hours but then do different things
    Some remake the connection at renewal and can break any internet connection you have.
    Also does the computer keep the Same IP when the lease does get renewed ?
    8:16 PM Wednesday; March 5, 2008

  • Wifi disconnects after about a minute after i am no longer using my computer . Why is this happening?

    After logging into my wifi connection, which does take some time to do.
    Why does my wifi disconnect after not using my computer for a few minutes?
    I am on osx lion  10.7.5

    Computer entering sleep mode after few minutes?

  • Wireless disconnect after login with Remote desktop with wpa2

    We have 5508 wireless controller with 1142 aironet acess points.... we configured Radius authentication on ACS 5.3  for wireless users
    when we take remote desktop connection of wireless client ... it disconnects after 10 sec.
    and  when we logged in to client ... connectivity was lossed  .. I have to reconnect Manually  to client..
    It's really frustrating for all our service engineers to work remotly ....... Please Help

    Hi Santosh,
    which vesrion of sw u r running on WLC ?
    Open Caveats on 7.4.100.0, CSCuc78713 could be related to this;
    CSCuc78713
    Symptom: Wireless client cannot receive broadcast packets after broadcast key rotation.
    Conditions: Dynamic WEP; 7.0.235.0, 7.2.110.0, and 7.3.101.0 controller software releases.
    Workaround:
    • Executes the config advanced eap bcast-key-interval 86400 in the middle of the night
    • Change security setting to WPA2, and so on.
    Regards

  • Deskjet 3050 can't connect now that i'm with Qwest isp with wireless modem

     had it connected no problem with comcast and my netgear wireless modem. I now have a qwest PK5000Z wireless modem and can't get my desk jet 3050 online. someone at qwest said there is a driver update is that true?
    i ran my HP network confi page and the active connection type says None. Network status says OFFLINE
    wireless 802.11 says status: Disconnected
    Network name SSID      found            FAIL
    every time i press the window buttons on my printer in the wireless dept. it says either pin or push. and now matter which i push it comes back wps timed out try again or cancel. the trouble shooter test said no trouble detected. i tried inserting my disk that came with my printer but once starting it says already installed. i give up. is there a driver i can dowload? i set up my profile on HP to request this stuff weekly. about an hour ago.
    i need to get this printer running. i have resumes to print out. hope someone can help. Thank you

    PROBLEM SOLVED. I DELETED MY HP PRINTER INFO FROM MY PROGRAMS AFTER GOING INTO CONTROL PANEL.
    THEN STARTED UP MY DISK THAT CAME WITH MY PRINTER AND FOLLOWED THE DIRECTIONS. TURNS OUT I HAD TO GO INTO A WEBPAGE THAT I VISITED BEFORE BUT FAILED TO WRITE IT DOWN. THE QWEST REP LED ME TO IT AGAIN AND THIS TIME I WROTE IT DOWN. I'M SO LAME. I FINALLY LOOKED ON THE DARN QWEST pk5000z MODEM TO FIND THE SSID NUMBER AND ALL THAT. TURNS OUT I FORGOT MY SETTINGS ENTIRELY. PRINTER WORKING...
    GOOD NIGHT

  • I can't be the only one with this issue. MacBook Pro Retina Late-2013 WiFi disconnects after waking up from sleep.

    Did anyone buy a MacBook Pro Retina 13" from Best Buy this Black Friday?
    I'm having an issue where the WiFi disconnects after the MacBook wakes from sleep but only after a couple of minutes.
    Once the WiFi disconnects, I can't reconnect to the same network and sometimes it won't find nearby networks.
    I have to turn off the WiFi and wait for at least 5 seconds before turning it back on for it to auto-reconnect to my home network.
    If I wait less than 5 seconds, it will continue to attempt connection to the home network but won't connect.
    I've tried reformatting and deleting my network configurations as well as resetting my modem, power cycling it, etc.
    I am using 2Wire Gateway modem/router from AT&T on b/g network.
    I've tried connecting to a friend's network under Time Warner Cable and the same issue occurs.
    I exchanged the MacBook at a Best Buy for a brand unopened one (I hope) and the same exact thing happens with this new one.
    Really, I can't be the only one with this issue. Unless in a 0.00001% chance I received two defective units in a row?
    Please.. does anyone have a clue why this is happening?

    You're definitely not the only one.  I have the same issue.  I spent 6 hours over multiple days on the phone with Apple support trying a variety of things (some of which are mentioned above), and none of them worked.  They finally sent me a replacement laptop.  I made sure to try it periodicaly as I was moving files and installing applications to see if I ran into it again and things seemed okay at first but now I am running into the same issue and it is terribly annoying.  I've got 5 other devices that connect to the same router and I've never had this issue with any of them.
    My router is a Linksys E2000.  I haven't tried changing the router channel but I have tried to cnnecting to other networks in the building I live in and I have run into the same issue there.

  • WRT1900AC - Nest Thermostat disconnects after 30 mins

    Just swapped my EA6500 for the new WRT1900AC, and everything is rock solid except for my Nest Thermostat. After about 30 mins the Nest will say that it can't take to the wireless, and if I reselet the SSID again, it will stay connected again for about 30 mins.
    I believe this issue has been seen before. Something about routers not supporting low power mode correctly and/or the default for timing about a client is less then 30 mins. The EA6500 never had this issue, but it looks like the WRT1900AC does.
    I've even set the 2.4Ghz to WPA2 personal only (as suggested by Nest) and the channel width to 20MHz only, but it's still being disconnected after the Nest enteres low power mode and before it wakes up again 30 minutes later..

    When I had the Netgear R7000, my 3M Wifi Thermostat would not connect and hold the link between the router and thermostat. I researched this on the 3M site and it was buried deep in their literature that there unit was having some compatibility problems with certain routers, they didn't name which make or model. According to their article they were soon to release a new FW for the device and an updated app for the iOS. Sure enough, almost 20 days later a new FW and app, and the thermostat was SOLIDLY connected to the R7000 and responding to all commands from the app.
    The WRT1900AC connected to ALL of my components right from the get go ..no hiccups. I suspect Nest needs to update their FW and all should be good.

  • Set up wireless modem without using a network card

    How can I set up my wireless router (WRT54G v8) if I do not have a working network card on my laptop? The wireless card works fine, but the wired ethernet card is shot. I have been connecting to the Internet via the USB port.
    The set up instructions assume you can connect to the Internet using your computer's ethernet card.
    I have a Comcast cable Internet modem.

    You can setup the router through a wireless connection although it is not ideal.
    With default settings the default SSID is "linksys" with no encryption. You connect to this network and open http://192.168.1.1/ Then you configure the router for your internet connection, change the SSID, enable wireless security, change the router configuration password, etc.
    It is a little bit more complicated as you have to make sure you configure your router and not your neighbor's who may also use a Linksys router in default configuration and you have a couple of disconnects after changing the SSID and after enabling the wireless security.

  • Soundblaster Wireless keeps disconnecting

    Hi!
    I just received my Soundblaster Wireless usb transmitter and receiver. Everything works nicely but the connection shuts down after a minute or so. If I click conncet from the Entertainment console or from the transmitter, the connection comes on again, but disconnects after a minute.
    The transmitter and the receiver are about 3 meter away and in a line of sight between each other. I have auto-updated the software and tried auto and all three different channels.
    Edit: I installed the latest Windows 7 drivers and nothing. It always plays for :28 and disconnects. Tried with the latest Media Player and Spotify.
    Where is the problem?

    Hi
    >I read on the Toshiba website that it does that to save power, so I changed the network adaptor settings so it doesn't turn off when running on battery
    Where did you change these settings? In Vista/Win7 power management?
    Please note that such settings can be changed there too.
    Additionally its recommended to update the WLan driver and checking if the BIOS is up to date.
    WLan driver can be downloaded here:
    http://aps2.toshiba-tro.de/wlan/
    Greets

Maybe you are looking for

  • Blank sender/subject spam - how to get mail to rec as junk?

    I'm getting hammered again in every mailbox with these blank sender/subject/body spam emails. I asked about a year ago and the word was to buy a spam filter software program. I'd rather get a script to do this. I recall I had one which I can't find.

  • Need to un-zoom after interacting with selection list in iPhone4s

    I am unable to resize dropdown in iPhone 4s. when we select dropdown the content of site gets zoom in.

  • Optional Parameter without a value

    Hi, I'm using Discoverer 10g. Somebody knows what is passed when an optional parameter (a parameter which doesn't require a user to enter a value) is left without a value ? I didn't understand actually if is passed NULL, 'NULL', '',' '... I need to k

  • Enlarged Smart Objects with vectors inside them appear as resized bitmaps

    In Photoshop CC for Mac I have... Created layers of vector art Combined them into a smart object Enlarged the smart object (both via "Transform" and "Image Size") Upon enlarging, the vector objects look the way an enlarged bitmap would (i.e. fuzzy, p

  • PE6 Burning RAW files on CD problem

    I am having a problem with burning my RAW (CR2) files on to a disk without them being converted to JPEG. I want to save them on a disk in RAW format so that I can get them off of my computer for space sake and still be able to edit them in RAW later.