Wireless module on 800 series reboot

I have a wireless problem on the 800 series and with two PCs connected to the wireless router and you're a 40GB file to send by second PC over the wireless module does away is this normal?

You can get the PoE daughter card pre-fitted before the appliance leaves the factory or you can do it yourself as an after-sales item.  
800-IL-PM-4 is the daughter card.  Read the Q & A below: 
Q. Can the PoE be upgraded after ordering?
A. Yes, you can upgrade the PoE on all models except the C892FSP-K9, which does not support PoE at all. For all Cisco 890 Routers, the product ID (PID) for the PoE upgrade is 800-IL-PM-4=. This PID comes with two power supply options: 80 or 125 watts. The older CISCO890 requires the 80-watt option, whereas the newer C890 requires the 125-watt option.
Q. Why do some routers use 80 watts and others 125 watts for PoE?
A. The 80-watt power supply is used in addition to the standard 60-watt power supply, so you will have two power supplies connected to the router. For the newer routers we combined these two power supplies into the one 125-watt power supply (hence we have a 4-pin connector). Both models support the base router as well as 4 ports with standard PoE.

Similar Messages

  • Confusion around PoE module for 800 series

    There seems to be a lot of confusion around the PoE module for the Cisco 800 series routers
    I'd like to know if the Cisco 887VA and 897VAW routers can have the internal PoE module fitted as an after sale item?
    I see reference to 800-IL-PM-4= but searching for that amongst suppliers seems to show an external Power injector that connects to 4 Ethernet ports on the router and then from there you connect the external devices.
    What I want to get is the internal daughtercard that adds PoE to the router itself.
    Can anyone help me identify the right part please?

    You can get the PoE daughter card pre-fitted before the appliance leaves the factory or you can do it yourself as an after-sales item.  
    800-IL-PM-4 is the daughter card.  Read the Q & A below: 
    Q. Can the PoE be upgraded after ordering?
    A. Yes, you can upgrade the PoE on all models except the C892FSP-K9, which does not support PoE at all. For all Cisco 890 Routers, the product ID (PID) for the PoE upgrade is 800-IL-PM-4=. This PID comes with two power supply options: 80 or 125 watts. The older CISCO890 requires the 80-watt option, whereas the newer C890 requires the 125-watt option.
    Q. Why do some routers use 80 watts and others 125 watts for PoE?
    A. The 80-watt power supply is used in addition to the standard 60-watt power supply, so you will have two power supplies connected to the router. For the newer routers we combined these two power supplies into the one 125-watt power supply (hence we have a 4-pin connector). Both models support the base router as well as 4 ports with standard PoE.

  • 800 series with wireless repeater supports?

    Hi,
    Can anyone confirm if any of the 800 series routers support wireless station-mode repeater?
    The software configuration guide suggests it is possible but I've been unable to find a definitive answer.
    Thanks.
    Sent from Cisco Technical Support iPhone App

    Please Check the following:
    http://www.cisco.com/en/US/docs/routers/access/1800/wireless/configuration/guide/s37rf.html#wp1101651
    Please make sure to rate correct answer

  • How do I restrict access to Wireless router (800 series) by mac address

    I hope I'm in the correct area.
    I'm trying to deny access to 3 wireless devices to the cisco 800 series wireless router
    The MAC address are:
    MAC Address    IP address      Device        Name            Parent         State
    0014.6caf.410a 192.168.2.26    unknown       -               self           Assoc
    9803.d8ba.cd42 192.168.2.41    unknown       -               self           Assoc
    a4d1.d205.72e1 192.168.2.25    unknown 
    If this cannot be done is it poosible to assign the mac address to an ip address and then denying access to the ip address.
    Thanks
    Jon

    Hello Jon,
    You should be able to do it either way. Best way would be by IP address so you do not even allow the host to associate with your AP.
    Looking for some Networking Assistance? 
    Contact me directly at [email protected]
    I will fix your problem ASAP.
    Cheers,
    Julio Carvajal Segura
    http://laguiadelnetworking.com

  • Ipv6 on 800 series

    I have a question how can you configure ipv6 on a 800 series?

    Install a version of IOS and featureset that support the IPv6 features you need. Reboot. Then configure those features.

  • Using WRT610N w/ Intel WiFi Link 5100 wireless module

    I am considering buying an FW or Z series Sony laptop which includes Intel WiFi Link 5100 as the wireless module, which is a dual range (2.4 & 5 GHz) 802.11 a/b/g/draft-n module. In order to benefit from wireless-n speeds as much as possible, I want to buy a good Wireless-N router. The one I am considering buying is Linksys WRT-610N. However, the thing is that I see on some forums that people have some problems with an older Linksys Wireless-N router used in conjunction with an older Intel wireless module. I am afraid I can have similar problem with the combination of the above mentioned router and wireless module. Moreover, I read a comment on somebody’s review of WRT610N on amazon.com that says that WRT610N is based on broadcom wireless chipset and thus may not give a good performance on PCs having an Atheros wireless module. If this is correct, it may go the same for using WRT610N with an Intel wireless chipset. Anyhow, my question is, have you been using a Linksys router with your PC that has an Intel wireless module and how do you find the performance (speed, range, frequency of drop-offs)? Comments from people using WRT610N (at least WRT600) along with a PC that has an Intel WiFi Link 5100 will be much more appreciated!

    I think your in luck.. I have the exact combination that you are considering. I have a Sony FW190 with the intel 5100 a/g/draft-n card.
    In my network I have the following:
    1 Toshiba laptop 802.11abg (atheros)
    1 Sony laptop 802.11abg (intel)
    1 Sony FW190 802.11agn (Intel 5100)
    I'm leveraging the dual radios on the wrt610n using 5Ghz band (wide) exclusively for the Sony FW190 the other laptops use the 2.4Ghz band.
    On the Draft-N wifi connections I get connection speeds from 136Mbps to 300Mbps .. I've gotten donload speeds from my home server at a sustained 60Mbps+ speeds.
    The configuration on both the laptop and the router took some understanding because of the features that 802.11n provides and the capability of the router to support dual radios. But overall I'm happy with the hardware and performance.
    Good luck! 

  • Wireless Module Not Supported...in the manual it is?

    HP maual located here: http://h10032.www1.hp.com/ctg/Manual/c02770268.pdf
    Page 20 Chapter 3 it lists:
    Intel Centrino® Wireless-N 1000 (802.11b/g/n) 593530-001
    So I ordered this from the HP parts store and received it today and the laptop posts with a Wireless Module Not Supported. WLAN Module ID 702 message.
    So how do I proceed from here? Laptop came with an ralink card that only connected at 72Mbps, the atheros AR9285 constantly connects at 65Mbps unless I reset my router every time I connect.
    My laptop is a HP Pavilion g6-1a40ca
    Help please!
    Marc

    Thanks for replying
    Looks like modding the bios is the only way I'll get something better into this laptop. All I know is that the two officially supported cards I have right here are terribly slow/flaky. Going by the manual I really don't have any other choice in wireless cards. This is a great laptop for the price, just wish it didn't come crippled.
    Oh I know...lol...I'll buy a usb one and soldier it onto one of the usb ports internally. j/k
    Thanks again for clarifying for me. If anyone has anything additional to add to this thread in future about adding support official or unofficial, please post it here.
    Thanks,
    Marc

  • Wireless module not working(70​1)

    Hello, i recently formatted my laptop and then i  found that at startup my laptop is saying Wireless module not found(701)
    It says it may be not installed correctly or not functioning.
    So i disassembled my laptop to see any connection problem and tried connecting with changing positions of wires  with card but still not working!
    I Googled for drivers but didnt geta any!
    here is detail about Wlan + Bt card
    AzureWave AW-NB041H
    IEEE 802.11 b/g/n + 802.15 BT combo card
    Model No.-RT3090BC4
    FCC ID- VQF-RT3090BC4
    IC-7542A-RT3090BC4
    India-448/2010/WRLO
    CMIIT ID- 2010DJ0636
    Please help to me to solve this problem!
    This question was solved.
    View Solution.

    It needs to be replaced. This one will work in your netbook. It will pass the whitelist BIOS check and provides wifi and Bluetooth:
    http://www.ebay.in/itm/HP-WI-FI-BLUETOOTH-COMBO-CA​RD-BCM94313HMGB-600370-001-598711-001-G6-CQ42-/321​...
    If this is "the Answer" please click "Accept as Solution" to help others find it. 

  • Wireless module different IP addresses

    hello I have a problem with my wireless router, cisco wireless module allows you to give different IP addresses so that IP addresses are different who can help me please

    First you want a merry Christmas and a happy new year 2011 and to wish good health especially
    no, it now works as a computer directly connected to the cable it does not get internal ip address of dhcp server wireless, nor how to solve that problem?
    mvg

  • Can I terminate 40 Mbps DSL BROAD BAND connection in Cisco 800 series routers

    Dear all,
     Can I terminate 40 Mbps DSL BROAD BAND connection in Cisco 800 series router?.It is not a leased line.
    Which Router model is best for 40 Mbps DSL Broad band termination ?
    Thanks&Regards
    Ajay Jose K

    Hi , 
     Below link provides you all model in 800 series . 
    http://www.cisco.com/c/en/us/support/routers/800-series-routers/tsd-products-support-series-home.html
    For your requirement below model should suffice . 
    Complete throughput from the router is 51 Mbps .
    Cisco C891FW Integrated Services Router
    HTH
    Sandy

  • Wireless module not supported

    I have a DV6Z-6C00 CTO laptop notbook and I recently had to install a new wireless card but I keep getting a Wireless module not supported error. I checked with the manual and I ordered a Intel Centrino-N 1000 WLAN Module (593530-001 replacement #) and I checked on the actual card (and they match). So why am I getting this error, and how can I fix it?
    Btw I have Windows 8

    Is the wireless card an actual HP card? It is not enough that it be the same Intel chipset card.

  • Troubles with 800 series AAA config

    hey all,
    I have attempted to configure our 800 series router to accept client to router vpns into our network. However the clients just don’t connect, no error message either. I am a little lost what to do, any help would be Massively appreciate as ive already tried experts exchange and they cant see anything wrong with it. I have attached the config to this message.
    kind regards
    Matt
    UK

    hi
    i feel you have posted the main hub site config where your remote locations dials in and establish the ipsec tunnel.
    But in your case the hub ip is not static you are getting the ip address from SP in this case how your remote clients will negotiate the isakmp and ipsec policies when they dont have a static peer ip configured in their configuration ?
    untill unless you have a static ip configuredi n ur hub site i dont think its possible at all for your remote peers to negotiate the key thigns to establish the ipsec connectivity.
    regds

  • Where do I go to get software updates for my wireless printer hp 4620 series

    I have a wireless printer hp 4620 series. It came with an installer cd that only allows use of OS X , Mountain Lion, and Lion. My system is OS Yosemite. The cd told me that the installation was not recommended and I should get software update from Apple. but did not give me a link as to where I could go. Please help! I need to re-establish my wireless connection between my Apple and my printer. ASAP.

    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-125737- 3&cc=us&dlc=en&lc=en&os=4159&product=5191646&sw_lang=
    It should print with old drivers but you need the updated drivers for scanning.
    Also see:
    Troubleshooting printer issues in OS X - Apple Support

  • My HP wireless Photosmart Printer D110 series shows connected to network, my HP laptop shows offline

    HP laptop Pavilion dv6-3210us PC shows my HP Wireless Photosmart Printer D110 series will not recognize each other.  Had worked well for past 6 months after I bought printer.  I have a new Internet provider  - could that give problems?  It did work for a while, but now my laptop says the printer is offline and it  isn't.  The printer says it's connected to the network.  (windows 7 operating system.  I cannot print anything, why?

    If you have a new router you may have to re-install the printer.  Is your router new or just your modem?
    In the mean time, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
    What does it say?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Connecting 800 series through a sr520

    hi there
    i have a demroom set up which includes a sr520 as the edge router connecting to the ISP and i have a uc 560 connected to that which is working fine
    i also have a new business edition 3000 and a 800 series router which im looking to connect to the sr 520 for access to the ISP as the 800 series doesn't have a ADSL line on it .i have given the 800 series routers wan interface a static address of 192.168.75.14 wich is from the address range in the sr520s default vlan and excluded the address from the DHCP pool. now from the ccp express on the 800 s i can ping the wan port of the 800 s and the default vlan/gateway of the sr520 and the wan ip of the sr520 but no further also once i try pinging it from the cmd on windows i cant ping any further that the wan interface on the 800 s . i was hoping some one could help me with this as im not to sure where to go next

    hi andy
    thanks for getting back to me .yes the wan port fe 4 on the 800 is 192.168.75.14 and i have a default route sending the traffic out fe4 the wan port to the next hop address 192.168.75.1 the default address/vlan of the sr520
    i have selected the wan port as the outside interface but have not  configured nat.
    the reason i have used the 800 at all is that the be3000 needs a router that has C.U.B.E (cisco unifyed border element)
    and the sr520 doesnt also i only have one broadband line that uses adsl which the 800s doesnt support so i thought it would be easy enough just to directly connect the 800 to the sr520 put in a few static route and that would be it
    but like i mentioned before i can ping the wan port of the sr520 from the ios of the 800 even googles dns  8.8.8.8 but get no internet connection and when i ping the wan interface from the sr520 its successful it seems to be from the wan port on the 800 and the 800s default vlan/gateway 10.10.10.1 wich is have some difficulty passing traffic
    any ideas would be more that welcome
    regards
    lee

Maybe you are looking for