Wireless mouse back/forward buttons don't work

I just installed Safari 3.1 for Windows on my machine. My back and forward buttons on my Logitech wireless mouse do not work in Safari. They do work in IE. Any help would be appreciated.

it has been my experious that these mice and keyboards with this function support IE6 or IE7 only unless it's stated on there page as a compatable program not much you can do. sorry
Message was edited by: Aopen

Similar Messages

  • My back/forward buttons don't work - have done 'reset toolbars and controls', but they still don't work

    When I downloaded the latest version I got a new screen with the orange Firefox tab at the top. That was fine, I could find what I wanted, but back/forward buttons didn't work. I checked the help section and went right through the suggestions down to 'reset toolbars and controls' - this did reset and I lost the orange box - that doesn't matter, but the back/forward buttons still don't work.

    Do you have more than one tab open? If you didn't go to another site in a single tab, then yes, the buttons will be greyed out. If you went somewhere in another tab, then those sites should be accessible by right clicking either button.

  • Mouse back/forward buttons no longer work in v29

    firefox 29
    windows 8.1 update (1) - IE all M$ updates installed
    logitech M570 mouse
    my mouse back and forward buttons no longer work in v29. i tried FF safe mode, i tried with logitech setpoint 6.5 enabled and disabled, resetting setpoint. i don't want to "reset firefox" because i just did a fresh windows install and fresh firefox 28 install before upgrading to FF29 a few days later.....
    BTW the back/forward buttons work in all other installed programs as well as FF28 in my windows 7 machine.
    thanks in advance for any replies....

    apologies for another reply. also, the back/forward icons (to the left of the URL area) work just fine. it's only the mouse buttons that don't work and after years of using them, i REALLY miss them!
    thanks

  • Mouse back/forward buttons don't respond after exiting from full screen Flash video

    Yeah. Has anyone else encountered this? After viewing a full
    screen video (YouTube, Hulu) and exiting (via the ESC button), the
    back and foward buttons on my mouse stop responding. Really!
    Usually I will have to go back into a full-screen video twice for
    the buttons to get "stuck," and then it takes them several minutes
    to regain their functionality.
    I've had this going on for over a year now, and I'm finally
    sick of it enough to where I want to get some help. I've narrowed
    it down to the Flash player as being the culprit, and it happens on
    every browser I've tried it on (Firefox 3: RC2, RC1, Beta5; Firefox
    2; IE7; IE6; Safari 3.x). This started happening when I upgraded
    the Flash Player and the first offending version would be the one
    that introduced the current full screen Flash video technology. I'm
    guessing it was 9.0.
    I have a Logitech MediaPlay wireless mouse, Win XP SP2. I
    have the latest version of Flash and the most up-to-date mouse
    drivers.

    I have the same exact problem, only a different model
    Logitech. Have you found a solution? Thanks, Shawn.
    [email protected]

  • Back & forward buttons won't work after going full screen   

    I have a Logitech cordless mouse. When ever I'm watching a
    video, like on You Tube, and I go to full screen, my mouse
    back/forward buttons won't work, and I have to re boot my computer.
    I have tried every thing Logitech told me to do, but still have the
    problem. They think it's a flash player problem. I saw that one
    other person in the forums has the same problem. Any ideas?
    Thanks, Shawn.
    [email protected]

    I can't find the preferences section of itunes. where is it because it isn't at the very top of the screen and I didn't see it anywhere else. i hasn't told me that the back-up is corrupted so I don't know about that. I just know that it always comes up with the error message 50 when I try to get the back-up restored to it.

  • My Microsoft Intellimouse back and forward buttons don't work in Firefox, but they do in IE and in Windows Explorer. It used to work, now it just stopped. Why and how can I fix this?

    Forward and back buttons don't work in Firefox but do everywhere else.

    Make sure that you set those buttons to the default action in your mouse driver software (Control Panel > Mouse or specific Intellimouse driver software).

  • Why are the back/forwards buttons no longer working after upgrade?

    Hi, I recently upgraded from Firefox 3.5 (I believe) to Firefox 4.0.1 and now the back and forwards buttons no longer work. I tried resetting the settings under the toolbars > customize, etc. That didn't work. FYI, I'm using a mac. Any solutions? Thanks in advance...

    A possible cause is a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • Mouse back and forward buttons don't work

    I have a Dell wireless bluetooth mouse. I installed Safari 4, and I like it a lot. I am thinking of ditching IE, but the back and forward buttons on my mouse don't do anything in Safari. It's very frustrating having to click the back button on screen instead of directly on my mouse. The buttons work perfectly in IE and in Windows explorer. I reinstalled the mouse drivers, but to no avail. Any ideas?

    Did u get any software for your mouse? What brand is your mouse? I have Logitech setpoint software, where I can adjust mouse profile, setup mouse buttons action... I also have option (checkbox) to make my mouse use windows generic settings (the one you have in Control Panel under mouse section.
    Now, this is just an idea, but it's good start point.
    What you can also do (if you have such software installed) to uninstall it, restart, and see if Safari back/forward will work. Maybe this software (for some bizarre reason) conflicts Safari default action (as you said you don't have such problem in Fx)
    Let me know if this worked for you.
    Cheers,
    Miki
    EDIT: Before you do all this, maybe it's easier for you (if possible) to try another mouse, to see if you have same issues or not
    Message was edited by: miki69

  • My firefox 5.0 does not respond to the mouse (back/forward) buttons. Is there a fix for this? I already updated my drivers.

    It is pretty much what I have stated. It works fine in other applications like IE, explorer but not for Firefox.
    I am running Windows 7 64bit with setpoint control centre version 6.30.41 and driver version 5.30.67.
    My mouse is the performance mx.

    This seemed to be a recurrent solution 2004-2006, and looks the same as what you found for yourself.
    :In the Set Point software, set the forward and back buttons to "other," Then select "generic button" from the drop down list for both of them.
    *http://img123.exs.cx/img123/5535/SetPoint_For_Firefox.jpg
    references: logitech mouse firefox back forward
    * Firefox Quickfind - Logitech Forums<br>http://forums.logitech.com/t5/Mice-and-Trackballs/Firefox-Quickfind/m-p/386805

  • After upgrading to FF4, my back, forward, buttons no longer work

    After I upgraded to FF4, my back, forward, and refresh buttons no longer work. I have tried restarting with Addons disabled, still an issue. Even the Alt-back arrow does not work. As well, the URLs no longer appear in the address box when I use Most Visited shortcuts.

    duh, I thought that I had disabled all the addons, but I hadn't. The culprit turned out to be: Favicon Picker 2 0.6.1.14.
    https://addons.mozilla.org/en-us/firefox/addon/favicon-picker-2/
    After disabling this add-on, everything went back to normal.
    mgdff

  • Back/Forward button tweak not working

    I've tried Rick Stone's Skinny on Skins suggestion for
    tweaking the code to make the Back and Forward buttons to work for
    navigation. To refresh, the Back and Forward buttons only work for
    Previous and Next topics for browse sequences. Back and Forward for
    topic navigation are not enabled for WebHelp. The tweaking is
    supposed to make it work for Back and Foward. I have tried his
    suggestion, and the code resests itself to the original (to support
    browse sequences) upon compilation.
    Any suggestions?
    Danni

    Ok, I spoke to soon. The new buttons show up in the Preview
    of the edited skin, but when I re-generate, the buttons do not show
    up at all once I view the result, however, when I preview them
    again in the edited skin dialog box, they are there. Any
    suggestions?
    I tried to use a different skin and that didn't work. In
    addition, I imported some new skins from Adobe's site, and they
    aren't showing up in my skin folder in RoboHelp (in my project
    folder, labeled !SkinSubFolder!), but are showing up in Windows
    Explorer. So I can't choose any of the new skins I've imported. Why
    is this happeneing?
    This type of thing keeps happening in my project. This has
    also happened with my baggage files. I add them, compile, they are
    there, and then mysteriously disappear after a little while.
    Sometimes I can get them back, most times not. Do you think these
    two problems are interrelated?
    Danni

  • Why is it my home page won't load when I open, my back and forward buttons don't work, the tabs have no boarders, they just show text and I can't tell which one I'm on sometimes, I can't download things, and firefox won't remember tabs when I close it?

    I've tried switching to an older version, re-installing the latest version, deleting add-ons, clearing my history and cookies, and nothing works. What the heck?! I didn't do anything, it just flipped out when I opened it!!!!

    Create a new profile as a test to check if your current profile is causing the problems.<br />
    See:
    * [[Basic Troubleshooting#Make_a_new_profile|Basic Troubleshooting&#58; Make a new profile]]
    If that new profile works then you can transfer some files from the old profile to that new profile (be careful not to copy corrupted files)
    See:
    * http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

  • Lenovo wireless mouse middle scroll button does not work

    lenovo bluetooth wire mouse works fine with click buttons but the middle scroll wheel does not work. scrolling with the wheel should move the browser screen up and down and it does not.
    click buttons work fine just the scroll wheel in the middle of the mouse

    I tried this setting (adding Firefox as an exception) and it had no effect :-(
    Mouse wheel still does not work with Firefox (but works with everything else).

  • Back/Forward buttons have stopped working how do i enable them

    I have no details other than it no longer functions

    Connect the iPod to your computer and restore from backup.
    If still a problem, restore to factory defaults/new iPod
    If still a problem then you likey have a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • Mobile wifi mouse back and forward functions don't work

    I just bought the hp wifi mobile mouse model MOWFFKUL and back and forward functions don't work and it's driving me crazy. I bought it for these specific functions. At first I thought that it was a broken mouse. So I went and returned it, got back home, and the same thing. I set the side buttons to other functrion options and they work. What the hell??? just the back and forward buttons don't. I'm losing my mind big time because I REALLY NEED those buttons/functions to work!! All the regular top buttons functrion fine, it's only the back forward setting that DOESN't WORK.

    I restarted my laptop, and the buttons worked! For only 2 minutes. Then nada ever again. What a POS. Come on HP, give a solution. I bought and returned it twice, which makes this my third wifi mouse. What a waste of my time. I think I'm just gonna return this mouse and forget the wifi mouse. Functionality is more important than a freed up USB port. I bought it for the forward/backward buttons specifically. HP used to make wonderful products, but this experience bring that into question now.

Maybe you are looking for

  • Valores de PIS e Cofins calculados no Faturamento que não vão para a J1B3n

    Olá pessoal, Gostaria de pedir uma ajuda a vocês. Estou em um cliente que está com o cálculo correto dos valores de PIS e Cofins no faturamento (VF03), porém estes valores não vão para a J1B3n nas Notas Fiscais de saída (venda), no entanto, os valore

  • Using an InCopy package with different versions of the same InDesign file

    Hi, I head up the studio for a London based design agency. We are looking into using InCopy with one of our clients (who will be off-site). In particular this will be working on Annual Reports. As an example the issue I am coming up against is the fo

  • How to Start EDI Batch from API

    Hi, I'm creating EDI batch configuration dynamically through API (using TpmContext object), but could not find a method which can start a newly created batch. from the UI, newly created batch is visible at Parties > Agreement > A->B > Batch Configura

  • Keyboard shortcut for filling the window?

    A couple years ago I was routinely using a certain key combo which would instantly expand a PDF's pages to fill the window (rather than having to click the button in the GUI).  But I've forgotten how to do it.  I've searched the "keyboard shortcuts"

  • Applications folder content disappeared after update

    Hi we've a Mac on OSX 10.4.11 and performed a routine update of Java, Norton and other mac software a couple of days ago (can;t remember which one, but there must be a way of accessing an update log somewhere?) and since then the Applications folder