Wireless mouse does not work after installing new batteries

I have a PowerBook G4 and have been using a wireless mouse and keyboard. The batteries needed to be replaced in my mouse. I successfully installed new batteries. The mouse will turn on. The LED blinks. But the mouse is not functioning. I must use the finger pad on the machine. I double checked the battery installation and even set-up the mouse as a device again. When I turn the mouse off, I get a "connection" lost window on the screen. I have tried
clicking the mouse to re-establish connection with no luck.
Any suggestions?

http://docs.info.apple.com/article.html?artnum=86468
I had the same problem today - go to the above URL and follw precisely the instructions - after you delete the current mouse settings from your bluetooth preferences - apparently you have to sometimes reinstall the mouse after changing batteries - however I changed them before and did not need to do this
hope this helps

Similar Messages

Wireless net does not work after installing SP1 for Vista - Error code 10

After installing Vista SP1 on my computer (T61 - Vista Business 32 bit) my intel 82566mm wireless net does not work.
Windows says "Error code 10" and suggests that I update the driver. I have downloaded the newest driver via another computer, but it does not help. Still error code 10.
Any one else has the same problem?

I fixed the problem. Uninstall iTunes and then reinstall it clean. Looks like upgrading is problematic.

My sound system does not work AFTER installing pc to tv wireless connection

my sound system does not work after installing hp pc to tv wireles device when I am using lap top for other purposes.

Hi,
You don’t install VS2010 on the client PC, then where did the Form Invoice not work? When you run it from another version of VS? Or when you run the application with application.exe?
Based on your description, one form works well, another form does not. I assume that two forms are in two different projects, then please check the .Net Framework used by the two projects. If they are different, you can use the
one used by the Form contact for Form Invoice.
Because this issue is a project issue, I recommend you to consult it on some application forum such as Windows Forms General forum for better support.
VS General Question forum mainly discusses
the usage of Visual Studio IDE such as
WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help
System and Visual Studio Editor.
Thanks,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have wireless mouse does not work with boot camp

i have wireless mouse does not work with boot camp

Did you install the correct driver for your Windows version? Are you saying the mouse does not work in Windows after Windows is installed?

How can I access applications if the wireless mouse does NOT work?

I have a new iMac (Snow Leopard) which comes with a wireless keyboard and a wireless mouse. Just in case that the wireless mouse does not work, how can I navigate through applications and the screen?
Any advice will be welcome. Thanks and cheers, Veit

Great, it works.
Let me replicate:
Shift-Command-A (on the Desktop, (but how to get there?) to open Apps, e.g System Preferences;
Arrow keys to navigate within Apps;
Command-down arrow to open a specific app;
Arrows to move around, e.g. to Magic Mouse
Space to open Magic Mouse;
Tab to move between options and arrows to change these; and Tab back to the back icon.
Thanks a lot to both of you, much appreciated your help. Cheers, Veit

Fastdial does not work after installing version 7.0.1

Fastdial does not work after installing version 7.0.1

'''this will fix your problem with FF 7.01 '''
'''http://dl.dropbox.com/u/10199236/fast_dial-3.5.1-fx-modified.xpi '''
'''''This link will fix Fast Dial for Firefox 8.0.1'''''
'''http://dl-web.dropbox.com/u/12466346/speedfox.org/addons/fast_dial-3.5b1fixed2-fx.xpi '''

Mp600r does not work after installing mavericks 10.9 what do I do now ?

Canon Mp 600r does not work after installing Mavericks 10.9 What do I do now ?

This thread should help:
https://discussions.apple.com/message/19407500#19407500?ac_cid=tw123456#19407500

HT4623 my phone main button not working after installed new version software 7.0.6

my phone main button not working after installed new version software 7.0.6

Arrange some liquid like petrol spirit and w 40
two drops in to home button.
30 times press slowly slowly and then restart your apply iphone.
You will get ready.
I am sure. Thanking you...

Wireless mouse doesn't work after installing iTunes

New 30Gb iPod, installed iTunes v6 on 6-mos old HP laptop with docking station/wireless keyboard/mouse. All is well, updated iTunes with latest from web, loaded songs on iPod BUT now wireless mouse will not work. Reset mouse, works for a few clicks, then dies. Reset mouse again, few more clicks, then dies. Reboot without iPod connected, no iTunes up, still mouse only works for a couple clicks. Touchpad on laptop works, also so does wireless keyboard so I know transmitter is working (not battery problem). All worked fine until I started playing with options in iTunes today. I didn't uninstall iTunes yet, is that next step? Anyone else have this problem? Suggestions???

I'm pretty sure it's probably just your mouse/computer, however I would recommend uninstalling iTunes just to make sure though.

Wireless mouse does not work

my wireless mouse batteries formed buildup around them. Now my mouse does not work, is there a way to make it work after this happens?

When checking your mouse or keyboard batteries, assuming the mouse is paired.
Turn off the device.
Remove the batteries,
Thoroughly clean the terminals both inside the battery compartment and on the batteries themselves.
Replace or renew the batteries.
Turn on the device. You should get a steady green light if the devices are paired.
Click the mouse twice to activate it.
Whether you use regular or rechargeable batteries you should buy the best. Discounted or unbranded batteries are likely to give a depleted performance and may be of irregular size, often leading to connection problems. Apple’s own brand, Duracell, Energiser and appear to be the best.

PCI wireless card does not work after restart - FM2-A55M-E33

Installed TP-LINK WN751ND wireless PCI card onto FM2-A55M-E33 motherboard. The card works fine after cold start, but does not work after restart. Windows recognises the card, but it gets code 10, cannot start.
BIOS is updated (v.11.1), as well as drivers and Windows 7 64.
I suspect that this might be the issue: Incorrect ASPM Transitions on the GPP Interface as found in ChipsetMotherboard_TechDocs/48671.pdf on AMD's official support site.
Does anyone know more about this issue?

Great! I've done that and now my card shows up. Thing is, when I try to get an IP address, it won't work. Here is the command output:
ieee80211 phy0: wl_ops_config: change monitor mode: false (implement)
ieee80211 phy0: wl_ops_config: change power-save mode: false (implement)
ieee80211 phy0: wl_ops_bss_info_changed: qos enabled: false (implement)
And then it times out and no IP is assigned. The thing is, wpa_supplicant stays alive after this time out, and I am unable to kill it (killall -9 wpa_supplicant won't kill it). At this point if I try to reboot the machine, it will stop at 'Rebooting' and won't go anywhere. If I turn off the wireless card in its switch Linux crashes. If I try to get an ip again (by running dhcpcd) the command will hang and not return to the shell anymore.
I am unable to find any useful information in the logs.
Got any more suggestions?
Thanks! (And sorry to disturb so much)

Wrt610n wireless network does not work after firmeware upgrade

Hi
I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan. Any suggestions? maybe the firmware tosted the router?
Regards
Stefan

Update -
After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

Wifi connection with 4s not working after installing new software ios6

wifi connection with 4s not working after installing ios 6.

Go to Settings > WiFi > Select your network and hit the right arrow to "Forget Network"
Then go to Settings > General > Reset Network Settings and try connecting again when the phone restarts.

Wireless Works during install.... Does not work after install.

Hiya!
I just finally finished semi-installing from live. it's exciting. I'm stuck at cli trying to get wireless to work.
it's really weird. First- I only have wireless (it's from my downstairs neighbors). I used it DURING the install process- downloaded all of the packages, etc etc.
But when I start up my computer, I get a [FAIL] by network (it does not start up). However, if i # ifconfig wlan0 up, the wireless turns on.
iwconfig does not work
and I cannot scan for networks...
During install, I was able to see the names of every network.
There isn't any sort of password for the router I would like to connect to (and connected to before); it's just a linksys.
My wireless card is intel 5300 and I'm almost certain I installed the 5000 driver package.
Thoughts?
Perhaps I should go to sleeeeeeep..
IT"S JUST SO ADDICTING

zee wrote:IT"S JUST SO ADDICTING
You've just been sucked into the world of Arch Linux! Watch as your skin becomes pale, your eyes turn square and you suddenly feel compelled to run "pacman -Syu" every 10 minutes
Must...... keep....... up...... to......date....

Apple wireless mouse does not reconnect after changing batteries

The wireless mouse on my iMac quit working after I changed batteries. There was no response to mouse clicks, or movement, or scrolling. Eventually I connected a USB mouse, did an orderly shutdown of the system, rebooted, and the mouse started working again.
The long story ...
The first time I encountered this problem was the first time I changed batteries in the Apple Wireless Mouse that came with the iMac 3.06 GHz Intel Core 2 Duo I purchased in January 2010. (The OS is 10.6.2 without updates.) I switched the mouse on, the green light on the bottom of the mouse blinked for awhile (at least a minute), but clicking or moving the mouse got no response. The new batteries were Eneloop 1.2v rechargeables. I tried clicking and moving the mouse several times over a period of ten or fifteen minutes, nothing.
I started searching the web for clues about what to do and maybe a half hour or so later I tried the mouse again and it worked.
A few days later I wanted to see if the problem was reproducible. I don’t remember now whether I removed the batteries and reinserted them or just power cycled the mouse, but again the mouse quit working. The green light would blink for awhile, about a minute, then would go off completely. I took this to mean the mouse was searching for the Bluetooth network, not finding it, and giving up. Over the period of half an hour or more I tried switching the mouse off and back on several times. The green light would blink, but nothing more.
I started searching for tips about reconnecting an Apple wireless mouse after changing batteries. I ran across a (2005) discussion on MacRumors forums titled “Wireless mouse troubleshooting problem...” The symptom was a little different, the mouse was partially functional. In this discussion some contributors thought weak batteries could be to blame. So I replaced the rechargeable batteries with new alkaline batteries. Still no go.
I attached a USB mouse and looked at the Bluetooth preferences pane. I was surprised to see the Apple Wireless Mouse was listed there with status paired and connected. Still at this point switching the mouse off and on would produce blinking light on the mouse, but no functionality.
I tried various things in the Bluetooth preferences to see if I could get the mouse connection to restart. When I tried to delete the mouse connection there was an alert saying this was the only mouse connected, was I sure I wanted to disconnect. I said yes, but nothing changed in the Bluetooth preferences pane. I tried unchecking the Bluetooth “On” box, etc. Eventually I only succeeded in losing response to the keyboard as well.
I attached a USB keyboard, shutdown the system, and rebooted. I didn’t know if having the USB keyboard and mouse plugged in would interfere with the wireless devices, but it did not. After the reboot both the wireless keyboard and the mouse were functional again.
Since then I have tried removing the batteries briefly a couple of more times to see if the problem would recur. I actually put the rechargeable batteries back in. Both times the connection was remade as soon as I clicked the mouse. I also now have seen the Apple support article about setting favorite Bluetooth devices http://support.apple.com/kb/TA21371 . I'll try that if this issue comes up again.

Hi, is this a question" Post?
or are you just offering an insight into your Mouse Issue?
Generally and at times we all have little idiosyncrasies appearing with the running of our Macs.
I use the same Logitech BT with my MBP. MB & iBook..(not at the same time) Only ever had one issue
and the cure was to completely Delete the mouse from BT -> Repair Permissions & Reboot then Re Install the BT mouse..Ihave just put a new set of batteries in the Logitech (only 2nd set ever)...L

Wireless mouse does not work after installing new batteries

Similar Messages

Maybe you are looking for