Wireless mouse not installed in windows (bootcamp)

My magic mouse is working fine on my iMac.
But in Windows the mouse is found but not installed. The wireless keyboard, however, is working all right but a small yellow triangle is visible.
Any suggestions?
bakkergh

Did you download the Windows Support software when you used Bootcamp Assistant? Then did you install the Windows Support software from within Windows?
http://www.apple.com/support/bootcamp/
https://discussions.apple.com/community/windows_software/boot_camp

Similar Messages

  • Apple wireless mouse not working in Windows 7

    I have Windows 7 loaded in Boot Camp and, for the most part, it works perfectly.
    However, neither my Magic Mouse nor my Super Drive work ... at least, not immediately.  My wireless Apple keyboard works perfectly and instantly, but my mouse only works after around a half hour after Windows opens and I haven't gotten the drive to work yet.
    Any suggestions?
    I'm flying a new iMac, 2.7 GHz Core i5, 16 GB 1600 MHz DDR3, running Mountain Lion.

    I had the exact same problem as you did (less the drive) Kybd ok mouse didn't work, after installing Updates for Win 7 (about 100+ lol) then my BT kybd stopped working
    In the Bootcamp Discussions there is a post about that. The post I didn't bookmark (i will from now on) but I followed this instruction posted (I copied & pasted to Notes)
    "Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties". Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK."
    After that wasn't working yet so, I went to start menu selected Devices & Printers...(if I recall), in the window selected "Magic Mouse icon (it was always showing but not working)  right click & selected "Properties"  for Magic Mouse, don't remember which tab it was but a driver was listed I checked it and clicked ok after a couple of minutes both the BT mouse and kybd worked and hasn't stopped since.
    Sorry for lack of precise instruction, not exactly a techie, but can handle myself somewhat in front of a screen & kybd.
    Hope this helps, it did for me, good luck
    Message was edited by: jdemelo11

  • Mouse Not Working in Windows Bootcamp

    I have a 13 inch Macbook Pro late 2011 and i recently installed Windows via Bootcamp and then i found out that i had no internet connection. i Installed the Bootcamp Windows Support driver i got my internet connection and i solved my wifi problem. But after that, my mouse wouldn't work and i was kinda fustrated.
    Is it my computer's problem or the Support driver's problem?
    Thanks
    ~Lawlc4tz

    what mouse?
    in windows on my imac my magic trackpad which is bluetooth works
    but my razer mouse don't work with bluetooth at all
    maybe it's a only 1 bluetooth type of mouse at the time thing

  • BootCamp made for Windows Vista would not install in WIndows 7

    Hi,
    I am trying to install Bootcamp drivers on Windows 7 with the Mac OS CD that came with my Intel-based iMac. The problem is that I bought my iMac when the latest Windows was Vista, and it would not install on Windows 7. The Bootcamp drivers for Windows 7 on Apple Support pages are "UPDATES" that require BootCamp 3.0 already installed in Windows. However, I cannot install BootCamp 3.0 in the first place, because it would be installed only on Vista. What should I do to have BootCamp installed on my Windows 7 so that I can set the default booting OS to be Mac OS again?

    Just an idea for you. There is an entire Apple Discussion forum dedicated to Boot Camp and Windows.
    Whereas, not everyone here with an Intel iMac has installed, tried to install or has experience with BC & Windows, everyone there has or at least has an interest. You may attract help more quickly there.
    The Forums are at the bottom of the main Apple Discussions page under Windows Compatible Technology. Here is a link;
    Boot Camp: Installation and Storage
    Dah•veed

  • I cannot get wireless mouse to work in windows 7 using bootcamp

    I cannot get wireless mouse to work in windows 7 using bootcamp

    OK, that is a Bluetooth mouse so open Windows Devices and Printers>Add a Device Toggle the power (on the mouse) off and then on. he mouse should appear in the window, follow instructions to add it.

  • Hp officejet pro 8610e driver will not install in windows 8.1

    the Hp drivers will not install from disc or online download.

    Hi @aggie62,
    Welcome to the HP Forums!
    I understand that your HP Officejet pro 8610 driver will not install on Windows 8.1. I am happy to help!
    A few questions for starters:
    What happens when you try to install the driver?
    Do you see any error messages?
    How is your printer connected? Wireless, Ethernet, or USB?
    Are you able to make copies with your printer?
    In the meantime, please try the following:
    Uninstall the software. Uninstalling the Printer Software.
    Clean boot the computer. How to perform a clean boot in Windows.
    Disable any antivirus programs. How to Disable Antivirus in Windows 8?
    Disable any firewall programs. Windows Firewall from start to finish.
    Create a new user account. Managing User Accounts and Logins (Windows 8).
    Re-install using the HP Printer Install Wizard for Windows .
    Hope to hear from you soon!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • HP UFT 12.02 not installing on Windows 7 Service Pack 1

    HP UFT 12.02 is not installing on Windows 7 Service Pack 1. But the Install Guide says it supports and recommends Windows 7 Service Pack 1 as the Operating System.

    Hey Hello Dear,
       Please upgrade UR windows 7 Service pack to Service pack 2.
       from my knowledge for SQL SERVER 2012 it requires Windows 7 service pack.
       And before installing SQL server 2012 Plz activate .NET framework for that,
       Put UR windows 7 Format CD then,
       Run Command prompt as Administrator and paste following cmd in that
    DISM.exe /online /enable-feature /featurename:NetFX3 /All /Source:c:\net35 /LimitAccess
    it will take 2 min. after that restart your PC and try to install SQL server 2012.
    Note: Before installing SQL SERVER again format UR PC/lapy once.
    After this if it gives error while installation then plz change ur setup and try again.
    This will be helpful.
    Best of Luck
    Regards,
    Sandesh

  • ITUNES 10.6 is not installing for windows 7

    ITUNES 10.6 is not installing for windows 7;

    Thasnk y.ou I just got my laptop and didnt get why the itunes icon wasnt popping up on my pc and i was getting no further qustions like i did when i installed it on my work computer. Well thanks again Up The Iron's Iron Maiden Rules

  • CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing.

    CS3 will not install on Windows 7, 64-bit. No error message. Just stops installing. This is a brand new machine. This is one of the first things I'm installing on it. I'm running Windows 7 Home Premium 64-bit. The disks are fine. I have the programs installed on my two XP machines. When I run the disk, I get the window pop up that says "Initializing Installation for Adobe Creative Suite 3". Then the disk stops spinning and nothing else happens. No error message. Nothing else happens. I'm baffled. I have searched several discussion boards and cannot find anybody that has had a similar install issue like this.

    Old_Timer I would recommend reviewing your install logs to determine the exact error message.  You can find details on how to locate and interpret the logs at Troubleshoot installation with install logs | CS3, CS4 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-installation-install-logs-cs3.html.

  • Itunes will not install on windows 7 home

    Any one had this issue
    Itunes will not install on windows 7 home

    Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (Later)
    Remove all of these items in the following order:
    iTunes
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support
    Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
    See also HT1925: Removing and Reinstalling iTunes for Windows XP or HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
    Should you get the error iTunes.exe - Entry Point Not Found after the above reinstall then copy QTMovieWin.dll from:
    C:\Program Files (x86)\Common Files\Apple\Apple Application Support
    and paste into:
    C:\Program Files (x86)\iTunes
    The above paths would be for a 64-bit machine. Hopefully the same fix with the " (x86)" omitted would work on 32-bit systems with the same error.
    tt2

  • Why downloadhelper not installed in windows 7 64 bit?

    why downloadhelper not installed in windows 7 64 bit?
    == After install when try to run or open

    Hi.
    You should ask the extension's author for support.

  • Just got iPhone 5, get home and find iCloud Outlook Add-in does not install under Windows XP.  I am loathe to upgrade to Windows Vista/7/8 just yet.  Can I obtain and use an earlier version of iCloud Outlook Add-in?  My iPad II synchronizes!

    Just got iPhone 5, get home and find iCloud Outlook Add-in does not install under Windows XP.  I am loathe to upgrade to Windows Vista/7/8 just yet.  Can I obtain and use an earlier version of iCloud Outlook Add-in?  My iPad II synchronizes!

    There is no 'earlier' version that supports XP. iCloud launched with Vista/7 support only.

  • ICloud Control Panel 2.1 will not install on Windows 7 x64

    iCloud Control Panel 2.1 will not install on Windows 7 x64. If I try the to run the install from the Apple Software Updater it the iCloud 2.1 crashes and I get a message that suggests I do a download only  and they run it locally. I do that and the install i.e. the exe file just seems to never start even if I try to "Run as Admin"
    I go int o task manager and there is no instance of the install running.
    What is the issue/work around to this?
    Thx to all for help.
    Michael

    I didn't try creating a new user profile. Not sure I completely understand what you're suggesting. I dont't want a new/different profile. I just want to be able to install the update.

  • The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix?

    The current iTunes 10.5 upgrade does not install on Windows 7 and indicates a faulty install package (error 2324). Advice or details on the release date for a proper fix? I'm not able to roll back to the prior version, so I'm stuck in limbo.

    There have been a number of problems with installing the latest iTunes on Windows 7 64-bit machines during the last couple of weeks.  You might want to do a search on that topic and see if anyone has a solution.  There have been various versions of the problem but a lot related to errors in the download package or failure to download.

  • ITunes 11.1.4 will not install properly - windows 8.1, 64 bit.  My only way to recover is to restore my system.  iTunes 11.1.3.8 functions properly.  When will Apply provide a workable update?

    iTunes 11.1.4 will not install properly - windows 8.1, 64 bit.  The only way I have found to recover is to restore my system.  I have unistalled/reintalled iTunes two times.  No success.  iTunes 11.1.3.8 functions properly (following system restore).  When is Apply expected to provide a workable update?

    Uninstall your existing copy of iTunes. Delete any copies of the iTunesSetup.exe (or iTunes64Setup.exe) installer files from your downloads areas for your web browsers and download a fresh copy of the iTunes installer from the Apple website:
    http://www.apple.com/itunes/download/
    (The current build of the 11.1.4.62 installer was changed a few days ago, which fixed the bulk of the reports of MSVCR80.dll/R6034/APSDaemon.exe/Error-7/AMDS-could-not-start trouble ... but the build number on the installer was not changed. So we're trying to make sure you do the reinstall using a "new good" 11.1.4.62 installer instead of an "old bad".)
    Does the install with the new copy of the installer go through properly? If so, does that clear up the error message?
    If you still have the same error messages cropping up, then try the procedures from the following user tip:
    Troubleshooting issues with iTunes for Windows updates

Maybe you are looking for

  • Row concurrency exception not thrown for 1 page but others

    All pages have the default of true for enableTokeValidation. Edit a page -> Save -> Browser Back Button -> Click on Save button For all but one of our pages, we will successfuly get the JboException for row concurrency is inconsistent, which is what

  • Properties box does not appear

    I recently upgraded from 6.1 to 7.1. Everything is working fine with DAQ and Motion Control. Today, I noticed some formatting issues with some controls and indicators. When I right click, the short cut appears but if I click on "Formatting and Precis

  • Customer/Supplier Statements problem

    Hi Experts On my master system my supplier/customer statements have stopped showing the BP details such as address and cardcode.  Nothing has been changed in the PLD over the last few days and my test system is working perfectly with the same informa

  • Ms sql server 2005  database connectivity

    hi when i try to define data source in struts-config.xml i am not able to connect to the ms sql server2005 due to this error ----""java.lang.NoClassDefFoundError: com/merant/jdbcspy/SpyLogger at com.microsoft.jdbcx.base.BaseDataSource.setLogWriter(Un

  • Mapping object attributes to ArrayField widget

    Is there a way to specify get/set methods for fields within an ArrayField widget instead of public attributes of the mapped type? We are trying to enforce strict encapsulation of our data objects, but it seems that the only way to display our data ob