Wireless mouse on my macbook pro

can I use a logitech  m315 wireless mouse on my macbook pro?I plugged in and it's not working. Works on HP laptop. Very new to Mac.

Logitech Support
http://www.logitech.com/en-us/support-downloads/support-contactus
Call them. Support-Main.
Best.

Similar Messages

  • I have to use a wireless mouse with my MacBook Pro because the touchpad does not consistently work.  Now, the wireless mouse is not consistently staying connected.  Any ideas??

    Why doesn't my Apple wireless remote remain connected?  It is frequently giving me a "lost connection" signal and since the touch pad works intermittently it has become frustrating.

    Hi at eeze,
    If you are having issues with your wireless mouse, you may find the following article helpful:
    Apple Support: Troubleshooting wireless mouse and keyboard issues
    http://support.apple.com/kb/ts3048
    Regards,
    - Brenden

  • Trouble setting up wireless printing between my Macbook Pro w. Mountain Lion 10.8.1 and my HP C4780 Printer

    Hi all,
    I'm having a frustrating problem trying to set up the wireless printing between my Macbook Pro 13" to my HP C4780 printer. I had no problem installing and configuring this before on my previous computer, a Macbook. However, when I got my new computer (the Macbook Pro), my wireless network wont show up when I try and install the wireless capability during the printer setup. I had to buy a new router and set up a new network around the time I got my new computer, so I wonder if this has something to do with it. My wireless network is a WPA/WPA2 personal, but so was my old wireless network with the old router and I didn't have a problem installing the wireless. I thought I might not have had the most up-to-date driver for the printer software, but I do. So, i'm stuck! Any thoughts??

    Go here and download all the manuals and read them on how to set up your printer.
    http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=3422866&
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HT1800 Trying to add a wireless printer to my MacBook Pro.  It was working properly until we had to buy a new modem.  I have gone through the steps associated with my printer and the other laptop in the house (Dell) working right. MacBook says printer dis

    I am trying to add a wireless printer to my MacBook Pro.  It was working properly until we had to get a new modem.  I have gone through the steps with the printer customer service rep, and it was working properly for one day.  When I booted up the next morning, the printer was no longer "connected".  It will work if I have the printer and computer connected, but I much prefer the wireless capability.  Suggestions? The printer is a Brother MFC7860DW.  The other laptop in the house (Dell) can print wirelessly so I don't think it's an issue with the modem or the printer.

    Hello,
    Mac OS X: About the Reset Printing System feature ...
    http://support.apple.com/kb/HT1341?viewlocale=en_US
    10.5/10.6/10.7 instructions...
    In System Preferences>Fax & Print, Right click or Control+click on the Printers list Sidebar, choose Reset Printing System.
    if you hold option and click the "-" tab it resets the printing system.
    http://www.macosxhints.com/article.php?story=20031215144430486
    Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions.
    Any devices that previously appeared in your Printer List and Fax List will need to be added again after resetting the printing system.
    Resetting the printing system in Mac OS X 10.5.x+++
        1.    To use the Reset Printing System feature in Mac OS X 10.5.x, follow these steps:
        2.    Choose System Preferences from the Apple menu.
        3.    Choose Print & Fax from the View menu.
        4.    Control-click on list of printers on the left side of the window, then choose "Reset printing system" from the contextual menu. If you don't see a list of printers, Control-click on the text "Click + to add a printer or fax" and select "Reset printing system..." 
   
  As an alternative, if you currently have one or more printers listed, you can Option-click the "-" (Remove printer) button.
    http://support.apple.com/kb/ht1341
    Reboot.

  • Wireless keyboard for my macbook pro function keys dont work?

    I bought a wireless keyboard for my macbook pro and the function keys such as play/pause will not work and yes i have turned the all keys thing off and went through the other keyboard things to try and resolve this problem
    Any help appreciated here

    I bought it for me my screen cracked on the pro and have it hooked up to another screen

  • Microsoft Bluetooth Mouse 5000 on MacBook Pro?

    Hi, I wondered if anyone uses a Microsoft Bluetooth Notebook Mouse 5000, on MacBook Pro? I have read some people using it fine, but some have also had issues (driver issue?). Just wanted to know if it worked well on Snow Leopard? Thanks.

    no issue...some keymapping sissues but no driveer issue

  • Is possible for me to use the wireless connection from my Macbook Pro

    Hi All, I just got my iPad 16GB WIFI and I would like to know if it is possible for me to use the wireless connection from my Macbook Pro. Basically I will be travelling quite a bit and my Macbook Pro has a Wireless 3G dongle. Is it possble to use this via the 'internet share' option so that the iPad can connect to the 3G wireless via the Macbook Pro?

    Yes. Just use internet sharing on your MacBook Pro.

  • Plugging a mouse into a Macbook pro

    I have just plugged an Apple Pro mouse into my macbook pro and although the red light is active under the mouse it does not move the curser - any ideas?

    what surface do you have it on, ive noticed some things will not work as a mouse "pad" with the IR mice.
    things like white paper and some glossy surfaces and some surfaces that have a lot of printing, patterns, etc are also bad
    oif that doesnt work check the other things that were already suggested
    -matt

  • I have a problem today every time i connect a usb mouse on the macbook pro turns off.

    I have a problem today every time i connect a usb mouse on the macbook pro the laptop turns off. What could i do to fix it?

    Execute SMC and PRAM resets:
    http://support.apple.com/kb/ht3964
    http://support.apple.com/kb/ht1379
    If no success, try another mouse.  It may be faulty.
    Ciao.

  • How can i know the exact model of my wireless network card? macbook pro 13"

    how can i know the exact model of my wireless network card? macbook pro 13"

    I think the best you can do is use the System Information application (Utilities Folder), looking in the wireless section.
    charlie

  • HT6065 I want to pair an Apple wireless mouse to my MacBook Air?

    I want to pair an Apple wireless mouse to a MacBook Air?

    Hi MacBookAirambmiexpe!
    I have an article here for you that will help you set up this wireless mouse:
    Bluetooth: How to set up your Apple Wireless Mouse or Magic Trackpad
    http://support.apple.com/kb/ht2845
    Thanks for using the Apple Support Communities. Have a good one!
    -Braden

  • Whenever I connected my Magic Mouse to my Macbook pro retina, the Internet doesn't right away...

    Whenever I connected my Magic Mouse to my Macbook Pro Retina, the Internet does't work right away,
    and while I disconnected the Mouse, it works immediately......
    Does anyone has the same prob. or know why it happens?
    Please help me out and thanks for your kindness!

    But I tested, I clicked a link and it started loading, and when I got the Mouse connected, it stops the process and got stuck...
    And I clicked a link again, now with the mouse connected, it stuck forever, and when disconnected the mouse, it immediately works!

  • What is the best wireless printer for the MacBook Pro?

    what is the best wireless printer for a macbook pro?

    I use an Epson NX430 (inkjet) which uses a wireless card: no issues. Also a Brother HL-3040 (laser) connected to modem by Ethernet cable: no issues. Depends on your printing needs and amount of work space available.

  • Problems w/ Apple Mighty Mouse and 2013 Macbook Pro

    I recently purchased a 2013 Macbook Pro (13-inch, non-retina), and have tried connecting my 2010 (apprx.) Apple Mighty Mouse via bluetooth.
    While it does connect, the right mouse button, "centre mouse button" (pressing down on the scroll wheel), and the two side buttons ("pinching buttons") do not work.
    I tried changing the settings through System Preferences, assigning the right mouse button as the "Secondary Button", the centre mouse button for the Dashboard, and the two sides for Expose - App Windows, but none of it worked.
    Any suggestions about how to remedy this would be appreciated.

    Hey there, I'm on the forums because I can't get my wireless mouse to connect to my new MacBook Pro either (just got it yesterday). Bluetooth Device Manager seems to "see" it when it searches, but insists it can't connect to it, saying either "device not found" (which is ridiculous, since it's right up there in the list) or "cannot find the necessary services." Yet I cannot find anything definitive on the tubes to say that the two don't work together. Anyone else have any ideas for us??
    I should mention I changed the batteries b/c at first I thought that's all it was. When it didn't work I brought it to a 2009 MacBook Pro, and that one connected no problem ::shaking head::

  • Wireless Headset for my MacBook Pro

    Dear Friends,
    I need a Wireless Headset to make and receive VOIP calls (skype, ichat, SJphone, etc.) in my MacBook Pro 2.33 (MacOS 10.5.2)...
    At home I have a “GN Netcom GN 9330 USB wireless Headset” that is very good but it is not portable and needs an AC Power Adapter.
    I try the “Microsoft LifeChat ZX-6000 Wireless Headset” of a friend of mine that is a USB Wireless Headset, but this doesn’t work with MacOS.
    I already tried several bluetooth headsets but all have a very poor audio quality. The sound comes and goes out with interference and with interruptions like “cuts”.
    I have heard about “Plantronics Voyager 510-USB Bluetooth Headset System” as a good option, but I am afraid of spending money with it and then becoming a bad option.
    Can anybody tell me something about this device??? As the MacBook has Bluetooth can I only buy the Plantronics Voyager 510 Bluetooth instead of Plantronics Voyager 510-USB Bluetooth???
    Can anyone recommend me a good Bluetooth headset to pair up with my Macbook Pro for VOIP use. OR a good wireless USB headset???
    Sincerely,
    Paulo
    (sorry for my bad english)

    For charity, no soul can answer me?
    Please...
    Thanks,
    Paulo

Maybe you are looking for

  • Error in calling a web service of primavera from sap MII

    Hi All, I am trying to consume a web service of primavera p6 from SAP XMII 12.1 I tested the web service from SOAP UI ,its working fine for me,but when I tested with MII ,connection is unsuccessful I have used the HTTP_Post Action block and entered t

  • Getting Connected for the First Time with JDBC

    Hello everyone. I am trying to make my first database connection to a mysql database with Java. I am using jdk 1.5.0, MySQL 4.1.11 nt, and I think I have the freshly downloaded driver C:\jdk1.5.0\jre\lib\ext\mysql-connector-java-3.0.16-ga-bin.jar" in

  • ECC6 EHP2 (ABAP+Java)  system copy using file system copy

    Hello Experts, I have a question around system copy method for a dual stack ECC6 EHP2 system. We are planning to take full file system backup of this entire ECC6 EHP2 dual stack system and throw it on a completely new hardware with new host name but

  • How do I save a slideshow (iphoto 09) and share it for use in a dvd

    I created a slideshow in iphoto 09 and want to save it and then share it with another person who will be adding it to a dvd with movies. I originally created the slideshow and then sent it to idvd and then saved it as an .img file but the file could

  • Choosefrom list with multiple conditions

    Hi all, I'm trying to get a choosefromlist to work with two conditions. the code'I'm using is:             Dim oCons As SAPbouiCOM.Conditions = oCFL.GetConditions()             Dim oCon As SAPbouiCOM.Condition = oCons.Add             Dim oCon2 As SAP