Wireless Mouse X3300 - Software Suite Install

Recently got a new Hp Wireless mouse x3300.
It works fine (Windows 7 recognised it as a new input devise) but would like to be able to configure it.
Downloaded the latest drivers and software suite from the HP site (sp60614.exe).
But these fail to install correctly and come up with permission issues on trying to create registry keys.
Error 1401 - Could not create key \SOFTWARE\Microsift\Windows\CurrentVersion\Run.
I've tried installing both as me and as administrator but makes no difference.
Other people seem to have reported this issue but I've seen no solution.
Can you help?!
I'm running standard Microsoft Windows 7 Home Premium (64 bit)
I've also had a look at the regsitry permisiions for that key and can see no obvious permisision issue.

Amy, welcome to the forum.
Here is the Quick Start page for the mouse. Click on the link "http://h10025.www1.hp.com/ewfrf/wc/supportLanding?cc=us&lc=en" and choose your country. From there you should be able to find the software and driver for the mouse.
Please click the "Thumbs Up+ button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

Why is my wireless mouse lagging after bootcamp install?

Hi all,
I'm running OS X 10.9.5 and I recently partitioned my hard drive so that I'd be able to run a specific statistical program on Windows. Everything went smoothly, and Windows is up and running.
However, I noticed that once everything was finished, my wireless mouse started acting strange. It started lagging periodically, so I thought the batteries may be bad. I changed them, and it didn't help. I plugged in a different wireless mouse, and the same thing is happening. They're both logitech - don't know if that matters. I've played around with the system preferences for the mouse, and nothing seems to work.
Any help is appreciated.

Keyboard/Mouse – Troubleshooting Wireless

Acer 8930G windows 7 Home Premium -HP x6000 Wireless Mouse driver unable to install successfully

I have an Acer 8930G notebook running on Windows 7 Home Premium, I recently purchased an HP Wireless x6000 Mouse , the blue tooth adapter works fine, mouse recognised OK but flickers about the screen, tried loading the correct drivers/software also tried downgrading to previous versions from the HP support; but the software will not install properly; causing the mouse not to be recognised by the system via the driver/software, and obviously the mouse does not respond correctly; jumpes around the screen also causes scroll issues.
This is unfortunate as this mouse has excellent reviews !
Anyone out there had similar issues?

Tricky21, welcome to the forum.
I have had this experience with several mice over the years. I have uninstalled the driverrs and software and reinstalled them. You can uninstall them using the Device Manager.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

HP Deskjet 2540 won't print wireless when HP software is installed

I'm trying to set up my 2540 wirelessly on multiple PC's on my network. I can get it working on every one but my main PC (which is Windows 7 Pro). On the others I just "Add Network Printer" and used the windows drivers and didn't install the HP software, and it works fine. But on my main PC I want the scanner and ink levels and all that to work. As soon as I install the HP software and try to print it does nothing (in MS Office it gives the error "printer not ready") and shows 0 Documents pending in the tray.
It does print test pages from the HP Printer assistant, and the EWS, just not any regular windows programs
Print and scan doctor says it's fine. Turning off firewall is no help. Updated the newest driver from the website.
IP Address of printer is static, and ping works
Ping statistics for 192.168.22.230:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 7ms, Maximum = 126ms, Average = 52ms
Printing from mobile (android) works
Also scanning works just fine through the software
Not sure what else to try.
EDIT: now I can't get it to work at all, even after uninstalling the software and trying to Add Network Printer only

sufguts wrote:
I'm trying to set up my 2540 wirelessly on multiple PC's on my network. I can get it working on every one but my main PC (which is Windows 7 Pro). On the others I just "Add Network Printer" and used the windows drivers and didn't install the HP software, and it works fine. But on my main PC I want the scanner and ink levels and all that to work. As soon as I install the HP software and try to print it does nothing (in MS Office it gives the error "printer not ready") and shows 0 Documents pending in the tray.
It does print test pages from the HP Printer assistant, and the EWS, just not any regular windows programs
Print and scan doctor says it's fine. Turning off firewall is no help. Updated the newest driver from the website.
IP Address of printer is static, and ping works
Ping statistics for 192.168.22.230:
Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 7ms, Maximum = 126ms, Average = 52ms
Printing from mobile (android) works
Also scanning works just fine through the software
Not sure what else to try.
EDIT: now I can't get it to work at all, even after uninstalling the software and trying to Add Network Printer only
I have EXACTLY the same problem. deskjet 2540 with Windows 7 will print the test page but nothing else. I can print from my ipad, but only tiny pages.

Wireless Mouse Issues on Restart with Snow Leopard

I have a late 2006 iMac (2.15 GHz Intel Core 2 Duo) with an Apple wireless mouse. I just installed Snow Leopard and everything seems to be fine with one exception. Upon Restart, the mouse becomes disabled. The only way to get it to work is to move the slider under the mouse back and forth--that seems to re-establish the connection at least until the next time I restart.
Has anyone else experienced this issue? Is there a solution?

This is also happening on my MBA(1st gen). Wireless keyboard as well.

Pro L10: After using a wireless mouse, the touch pad has stopped working

Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. On start up the touch pad icon shows and the touch pad operates intermittently, after a few minuets the icon disappears and the touch pad stops functioning. In the control panel/mouse & or device drive I can the program operating and then disappears.
I have removed the software and reinstalled to no avail. On occasions I get a message to say that another pointer is in operation.
Can you help?

Hi
It seems that the wireless mouse or the wireless mouse drivers/software has a bad influence on the touchpad.
I dont have a proper solution for this issue. Well, you can check the Toshiba driver page for newest driver updates. If the updates doesnt solve this issue so I suggest to use either the wireless mouse and disable the touchpad with the key combination FN+F9 or to use a common USB mouse.
I assume that you dont have any problems with a common USB mouse.

Wireless mouse doesn't work after installing iTunes

New 30Gb iPod, installed iTunes v6 on 6-mos old HP laptop with docking station/wireless keyboard/mouse. All is well, updated iTunes with latest from web, loaded songs on iPod BUT now wireless mouse will not work. Reset mouse, works for a few clicks, then dies. Reset mouse again, few more clicks, then dies. Reboot without iPod connected, no iTunes up, still mouse only works for a couple clicks. Touchpad on laptop works, also so does wireless keyboard so I know transmitter is working (not battery problem). All worked fine until I started playing with options in iTunes today. I didn't uninstall iTunes yet, is that next step? Anyone else have this problem? Suggestions???

I'm pretty sure it's probably just your mouse/computer, however I would recommend uninstalling iTunes just to make sure though.

Installing Wireless Mouse on MacBook 13"

I am planning to install Windows Vista on my MacBook 13". I am wondering how do I install Wireless Mighty Mouse after installation is done; because I know that I will have to use wired mouse (correct?) during the installation process.
Thanks for help!
HHL

After the Windows installation is complete and you have booted into Windows for the first time (You will be at the Windows Desktop), and as per instructions in the Boot Camp Guide, you should insert the Leopard installation disk in the drive. This action will automatically install the Windows drivers for the version of windows that you have installed. This includes the bluetooth drivers. Once this is done then bluetooth will have been activated and you should be able to pair the wireless mouse with your system under windows.
Axel F.

HP OfficejetPro L7780 - Problem installing HP Deskjet and Officejet Software Suite and Driver.

I was having problems with the scanner in my HP Officejet Pro L7780 All in One.
On an HP discussion board, I found that I should install the full HP Deskjet and Officejet Software Suite and Driver.
When I tried installing it, an error message popped up saying that "the application had requested the Runtime to terminate it".
I have no idea what this means. Any help/suggestions? Thanks!

Try following the document below Click on your OS, and follow as many steps as you can.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00836418&tmp_task=solveCategory&cc=ca&dlc=en&lc...
*** If my reply was helpful, please click on the "Kudos Thumbs-Up" on the right, as a way to say "Thanks!".
If this reply also fixed your issue - please click the "Accept as Solution" button, so that others can find the same answer. ***

Wireless mouse does not work after installing new batteries

I have a PowerBook G4 and have been using a wireless mouse and keyboard. The batteries needed to be replaced in my mouse. I successfully installed new batteries. The mouse will turn on. The LED blinks. But the mouse is not functioning. I must use the finger pad on the machine. I double checked the battery installation and even set-up the mouse as a device again. When I turn the mouse off, I get a "connection" lost window on the screen. I have tried
clicking the mouse to re-establish connection with no luck.
Any suggestions?

http://docs.info.apple.com/article.html?artnum=86468
I had the same problem today - go to the above URL and follw precisely the instructions - after you delete the current mouse settings from your bluetooth preferences - apparently you have to sometimes reinstall the mouse after changing batteries - however I changed them before and did not need to do this
hope this helps

Just installed Safari on PC. MS wireless mouse will not scroll on most pages; will scroll on history section of homepage. Any explanation?

Just installed Safari on Sony PC. MS wireless mouse will not scroll on most pages. But will on "History" section of homepage. Help appreciated.

Panic over. I tunes now appears to be working normally.

Zen Xtra New Firmware Problems, Cannot install New Creative Software Suite after upgr

Hi?As with a previous post?http://forums.creative.com/creativel...essage.id=3535?I am having difficulty getting my Zen Xtra to bee seen by anything but Windows Media Player 0.. I have updated the firmware to the latest version, "reati've Zen and Jukebox Driver Upgrade version .30.03"?updatd the Device Dei'vers and rebooted?have XP sp 2?have updated and installed the Creative MediaSource Player/Organizer 3.30.2, software?but the "Creative Software Suite for PlaysForSure-enabled Zen Xtra Players" file?"[size="2" color="#3300ff">ZENZ_PCAPP_LB__40_03_MTP.exe" [color="#000000"]is not loading.. [size="2" color="#3300ff">[color="#000000"]?[size="2" color="#3300ff">[color="#000000"]When trying to install I see the Zen flash and the connected icon on the Zen flickers but then goes off and the install says "unable to find device"?I have unloaded and reloaded everything over and over.. even reset the OS on the Zen...?so the only thing that can load to my Zen is WMP 0.. which is not what I want...?please advise??Message Edited by grommit on 02-25-200606:26 PM
Message Edited by grommit on 02-25-200606:32 PM

I hope you are still here Grommit.
The reason why the new Creative Software Suite will not install is because the firmware you have is not the version the suite is looking for.
If you want to install the new Suite, you will have to update to the PlaysForSure firmware (2.0.03, I believe). However, if you do this, be aware that you will also have to download and install the latest Zen Driver, Creative MediaSource, and Zen Plugin for the MediaSource (all available in the download section) - also, once you start the firmware update on the Zen Xtra, you WILL NOT be able to revert back to a previous version of the firmware, and the drivers and programs on the install CD will not function with the new player at all.
Unless you use a subscription service with DRM mp3s, or have had issues with Playback Errors in certain mp3s, there is very little immediate need to upgrade.
Cheers,
ShinjiT

Problem Installing Zen Xtra Software Suite HELP

I have a Creative Nomad Jukebox Zen Xtra 40GB and I am trying to load my music onto it. I went to creative's site and installed the driver:
Creative Zen and Jukebox Driver Upgrade version .30.03
After installtion I connect the device for the driver to take effect.
Then the Autoplay feature of XP asked me what I wanted to do.
I selcted Synchronize media files.....using Windows Media Player v0
I got the error that:
Windows Media Player does do not detect any portable device. Connect your portable device, and then try again.
I went back to Creative's website and downloaded:
Creative Software Suite for PlaysForSure-enabled Creative NOMAD Jukebox Zen Xtra Players
The current frmware v2.0.03
I went to install that and I got an error saying that:
Setup could not detect any portable device on your system.
Setup will now install the necessary drivers to enable your device to be detected
I selected OK.
It said Please remove any Zen Xtra devices before the installtion. I did.
Then it said Please reconnect your device for the driver to take effect. I did.
And I still got the Setup could not detect..... error.
Any idea's on what may be causing this? ThanksMessage Edited by dan-lemm200 on 05-27-2006 09:34 PMMessage Edited by dan-lemm200 on 05-27-2006 09:36 PM

Go to the Knowledgebase section and search for article "SID0053". Try the steps mention in it and see if it hel
ps.
Jason

PLEASE HELP ME GET THE SOFTWARE TO INSTALL ON MY COMPUTER SO I CAN HAVE WIRELESS INTERNET

Okay i know this is off the tangent but i am losing my mind i have a wireless B broadband router model number befw11s4 and i lost the cd upon a long tideous move so can you please anyone PLEASE HELP ME GET THE SOFTWARE TO INSTALL ON MY COMPUTER SO I CAN HAVE WIRELESS INTERNET i am losing my mind i callled linksys and they were no help telling me i had two option to either buy a 29.99 plan or a 39.99 plan and i couldnt get the help i needed unless i bought the **bleep** plans so i said kindly thank you for your time ...I figured i would post a thread up asking if someone anyone can please help me get this software or cd so i can install it on my computer !! THANK YOU FOR YOUR TIME !!!!!
Message Edited by kent07 on 11-20-2009 05:46 PM

You don't need any software to run the router at all. Connect with your wired computer to 192.168.1.1 username blank, password admin and configure your router manually like everyone else.

Since installing Lion, I have not been able to utilize Time Machine (does not recognize the back-up drive); my wireless mouse does not function properly; I have experienced unreasonable delays in the system. Is there a fix or upgrade coming?

Is there a fix or upgrade to deal with the many problems I am experiencing since I installed Lion? I can no longer utilize Time Machine (Does not see the back-up drive); my wireless mouse does not work properly; my iMac has slowed down considerably. I am reminded of having a PC machine again. Bummer!

Either downgrade to Snow Leopard or try reinstalling Lion.
Reinstalling Lion Without the Installer
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alterhatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer.
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard (see below.) I suggest you make a separate backup using Carbon Copy Cloner 3.4.1.
If you have Snow Leopard Time Machine backups, do a full system restore per #14 in Time Machine - Frequently Asked Questions. If you have subsequent backups from Lion, you can restore newer items selectively, via the "Star Wars" display, per #15 there, but be careful; some Snow Leopard apps may not work with the Lion files.

Wireless Mouse X3300 - Software Suite Install

Similar Messages

Maybe you are looking for