Wireless Music doesn't work with new software

Hello-
I can't get my wireless music to work after I update the software to the latest version. The only one that will work is when I install it from the CD. But, I would like to use the most recent version of the software. As soon as I update, the Media Server won't launch on my computer. I am using a linksys WRT54G wireless router. If I check DHCP clients, the wireless music receiver is successfully getting an IP address. I have tried all of the things that linksys suggested (disable WEP, firewall, broadcast SSID, etc...) to no avail. Has anyone gotten the latest media server software to work with WRT54G? I have tried it on both my XP and W2K machine, with the same results (doesn't work).
Thanks,
Rich

Hi Jeremy
I have the similar problem, I've installed the software on my desktop, no error messages (apart from the certificate) and everything seems to be fine. After about 2 minutes the message appears that the network is not ready and consequently the media server is not running.
Without the server running I can't setup the Network and the entire system is not working. I could ping it but that was about it.
I've reset my router, renamed the SSID, tried with and without WEP, MAC, without firewall, opened a new account on my desktop with admin rights installed the software again into a new folder - result still not working, same error message.
To make really bad, I installed it on my laptop, same procedure and it works fine! So it seem that it has nothing to do with my wireless devices or configurations, there must be a problem while setting up the software on my desktop.
I really would appreciate your help a lot!

Cheers

Balz

Similar Messages

SessionManager doesn't work with new xerceimpl.jar?

Hi,
Does anybody know the solution to the problem below?
The toplink sessionmanager, which loads sessions.xml for database session pooling, doesn't work with new xerce parser(xerceimpl.jar). It is tieing to old xerces.jar parser, which has been upgraded to have more functions.
Thank you in advance.
Praveen

Hi Raanan,
It works with old xerces.jar. But in-order to get new functions from new xerces jars from apache, I got xml-apis.jar, xercesImp.jar. They got modified from old ones. So this is breaking toplink sessions.xml load to work.
Did you face this problem?
Thanks
Praveen

The HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't work. All software is updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

My HP (USB connected) and Epson (wireless) printers keep losing their connection with my Mac mini. I have to physically disconnect the HP and then reconnect for the Mac to find it. Turning off the wireless Epson doesn't resolve anything. All software/drivers have been updated.

Seems RTL8192EE wireless card doesn't work with Linux 3.19

Hi all, I just fresh installed ArchLinux on my new Thinkpad T450s. The installation has been smooth enough. I can use wifi-menu on ArchISO image (which is based on kernel 3.18.6) to get my wifi connected. Everything works great. But when I reboot into the new hard disk installation, the WiFi connection always fails.
I have tried to connect manually via wpa_supplicant and dhcpcd. It didn't show any error information like driver issue or so. The problem I can see is the link is really slow: too slow to get authenticated by router. At a small chance I can connect to the WiFi but then failed to get dhcpcd work. And at a really really small chance I can get an IP from the router but the ping latency to gateway is about seconds, so I cannot visit any service via this network.
This issue happens to Linux 3.19. I have tested on 3.19.2 in core and 3.19.3 in testing.
Is there any of you have the same issue, and is there a solution for this currently?
EDIT: typo
Last edited by sunng (2015-04-02 07:16:12)

fabiopicchi wrote:
For those using kernel 4.0, the problem is partially gone. The wireless connection doesn't randomly drops and you can always connect correctly but you can get really slow speed, and sometimes all packages are lost.
Installing this new version of the driver solves the problem:
sudo git clone http://github.com/lwfinger/rtlwifi_new.git
cd ./rtlwifi_new
sudo make
sudo make install
sudo modprobe -v rtl8192ee
Yes, rtlwifi_new works for me. I do hope this can be merged into mainline some day.

MacPro eSata Port/Card doesn't work with new Hard Disk

I just bought 4 x 3TB Hard Disc http://tinyurl.com/d2rglvn (specs of disc)
Which I put in Macally Enclosures to work on my Barracuda internal Hard Drive externally http://tinyurl.com/clg8yjo
I already have like 5 x 1,5 TB that works perfectly well with eSata connections (with exact same enclosures)
**My problem is that my 4 new Hard Discs works really fine with my Mac Pro but only with the USB connections but won't work with the eSata Connection. I tried it on a MacBook Pro with an ATA to eSata adaptor and it works perfectly fine (So my discs are not the problem) **
I am working on a Mac Pro (bought in 2007) - Mac OSX 10,6,8 and this is (I think) the card where I put the eSata :
PCI Card :
pci1095,3132:
Type:    Other Mass Storage Controller
Driver Installed:    Yes
MSI:    No
Bus:    PCI
Slot:    Slot-2
Vendor ID:    0x1095
Device ID:    0x3132
Subsystem Vendor ID:    0x1095
Subsystem ID:    0x3132
Revision ID:    0x0001
Link Width:    x1
Link Speed:    2.5 GT/s
I am kind of new using Mac and its support so what want to know is :
Do I need to update my PCI Card ? If yes how can I do that ?
If not, what can I do to make my disc work ?
My disks are eSata III (6GB/s) is it compatible with my Mac Pro ?
Thank you Very Much for your time

Difference between the disk that works in eSata and those that doesnt is this....
Works : ** 1.5TB 7200 RPM 32MB Cache SATA 3.0Gb/s 3.5"
Doesn't Work : **3TB, SATA III (6Gb/s), 3.5", 7200RPM, 64MB
it is probably the problem but i don't know what to do to fix it !

Ethernet card doesn't work with new arch install?

Hi guys,
so this is kinda my first post, not that I'm new to arch i just never had an issue i couldn't figure out on my own... But i love arch i have been using it for about a year now and have had no serious problems except for this. I have had arch running on an older dell vostro 200 desktop before i reinstalled with a vary similar issue except that the fix i came up with doesn't work anymore. I will tell you about the first issue first because i ALMOST posted on here about it originally but i figured out a way to make it work even though it was a hassle.
After cold/rebooting my computer the network card doesn't work at all. lspci reported that the kernel module e1000e was the correct one (i have verified this) and that the kernel has loaded it, i verified that with dmesg but still it wouldn't work. After much much anguish and hairpulling, I realized that it had to have something to do with the module so i tried forcing it to reload with rmmod e1000e and modprobe e1000e and it still wouldn't work until i physically unpluged the ethernet cord and pluged it back in until the light on the NIC turned on. After that everything works as normal i could even unplug and plug it back in with no problems. So eventually i wrote a script that did this for me (except for the uplugging and plugging part) and i used that when i cold/rebooted.
But now i have the exact same issue after reinstalling arch to the T except for the fact that the (crazy) fix i came up with doesn't work now. I used my "fix" after booting from the arch cd and it worked just like it always has. And now after rebooting into my fresh system the fix doesn't work anymore. So now i'm back where i was to begin with but i have no idea what to try next. I didn't do anything particularly different during installation except i added a udev rule for the e1000e module just to see if somehow that would fix the problem... it didnt and i have since deleted that (to see if it was the problem). The only other thing that is different is the root and home are now btrfs partitions instead of ext4.
I have booted several other live cds and dvds (diferent distros) including arch derivatives such as manjaro and they all worked just fine, using the same kernel module (e1000e). I'm not sure what that could mean but i know that it means there is a fix for this some way or another. I am going to hook up a wifi adapter and connect that computer to the internet to put some more information up if it's needed (asked for) but for now lspci -vnn | grep -i -A 10 net reports
00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
Subsystem: Dell Device 0238
Flags: bus master, fast devsel, latency 0, IRQ 42
Memory at fdfc0000 (32-bit non-prefetchable) [size=128k]
Memory at fdfff000 (32-bit non-prefetchable) [size=4k]
I/0 ports at ff00 [size=32]
Capabilities: [c8] Power Management version 2
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [e0] Vendor Specific Information: Len=06 <?>
Kernel driver in use: e1000e
Kernel modules: e1000e
ip a reports:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
3: enp0s25: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
link/ether 00:1d:09:8c:36:f6 brd ff:ff:ff:ff:ff:ff
4: wlp0s29f7u3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
link/ether 64:66:b3:16:92:10 brd ff:ff:ff:ff:ff:ff
inet 172.16.1.55/16 brd 172.16.255.255 scope global wlp0s29f7u3
valid_lft forever preferred_lft forever
inet6 fe80::6666:b3ff:fe16:9210/64 scope link
valid_lft forever preferred_lft forever
lsmod | grep e1000e
e1000e 215644 0
ptp 17692 1 e1000e
any help on what to do next would be greatly appreciated.
Last edited by mvheart/dev/null (2014-08-18 04:02:12)

Sorry I was thinking that it was say "state up" after that, I was looking in the wrong place... It's been a long time since I was playing around with this. So it is as i thought it was before?
[aaron@arch-box Arch-Linux]$ sudo systemctl start [email protected]
[sudo] password for aaron:
Job for [email protected] failed. See 'systemctl status [email protected]' and 'journalctl -xn' for details.
[aaron@arch-box Arch-Linux]$ systemctl status -l [email protected]
● [email protected] - dhcpcd on enp0s25
Loaded: loaded (/usr/lib/systemd/system/[email protected]; disabled)
Active: failed (Result: exit-code) since Mon 2014-08-18 11:20:29 EDT; 4min 11s ago
Process: 17650 ExecStart=/usr/bin/dhcpcd -q -w %I (code=exited, status=1/FAILURE)
Aug 18 11:19:59 arch-box dhcpcd[17650]: version 6.4.3 starting
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: adding address fe80::ae3:ee04:7099:77c5
Aug 18 11:19:59 arch-box systemd[1]: Starting dhcpcd on enp0s25...
Aug 18 11:19:59 arch-box dhcpcd[17650]: enp0s25: waiting for carrier
Aug 18 11:20:29 arch-box systemd[1]: [email protected]: control process exited, code=exited status=1
Aug 18 11:20:29 arch-box systemd[1]: Failed to start dhcpcd on enp0s25.
Aug 18 11:20:29 arch-box systemd[1]: Unit [email protected] entered failed state.
Last edited by mvheart/dev/null (2014-08-18 15:50:10)

Scanner not working with new software?

Recently I bought and updated my computer with Snow Leopard. But when I went to do my first scan after updating, HP Photosmart told me that it could not find my scanner. Before, I came here to find a way to connect my scanner to my mac and I received a download and installed it. What do I need to install now to make my scanner work with my computer?
Oh, and the scanner I have is a HP Deskjet F300 Series

bimms4 wrote:
The only additional issue is that I am connected via wifi.
Any suggestions please?
I think that's your problem. I've got a wifi printer (Brother) that works great in every way - except scanning via wifi. In order for scanning to work it has to be connected via USB or ethernet for it to be recognised. Shame, needing a cable just for scanning purposes.
I expect there are some wifi printers/scanners out there that work completely wirelessly but it doesn't include mine or the few HPs I've set up elsewhere.

TS1559 why are 4s's not working with new software and apple won't come good

I have a iphone 4s with the new update is making my phone slow and the wifi is not working. 200.00 to fix it. I have apple laptop, desktop, 4 iphones two 4s and two 5c's and they will not fix what their update did to my phone. Any feed back to help resolve this would be appreciated. I put it in the freezer( an online solution), restarted it to factory settings, reset my wifi and nothing everyone one says there are many 4s's that are doing this since the new software. Sounds like they just want you to buy new phones and my contract is not up for one year with my provider, I am very frustrated and disappointed.

burkey7669 wrote:
I put it in the freezer( an online solution),
No intelligetent person puts electronics in the freezer.
Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). If none of this resolves, then the device should be taken to Apple for evaluation.
If Apple determines the device has suffered a hardware failure, they will either replace under warranty (if under warranty) or offer an Out of Warranty replacement.
So what exactly is the problem? They offered an Out of Warranty replacement for the defective device.

EMET doesn't work with common software in Windows 7

I installed EMET 5.0, and began to have problems with EMET shutting down Acrobat Reader, Flash, Java, Internet Explorer, and browser linkage to .PDF files. Also, I could not load a .PDF file directly either. (No way to view the PDF docs
for EMET!)
Error messages included "simexecflow", EAF mitigation and need to turn off "Deep Hooks", and others.
I installed EMET about a month ago, didn't notice immediate problems, but a large set of Windows updates happened soon afterward (installed 11/8/14). Soon after this I first noticed the problems. I can't say for sure they weren't there before,
since the time between was short.
I (I think) managed to stop the Java and Flash problems with settings, but could not get others fixed. I finally had to uninstall EMET to fix ALL the problems !
We also have a Vista and an 8.1 machine, no problems with EMET (so far!).
I know that EMET may have problems with some applications, but it seems to me that there should NEVER be problems with these very common and essential applications.
Please either fix the problems with EMET, or tell me specifically what's needed to make these apps work with Windows 7 and EMET.
This machine has been thoroughly checked for all manner of malware, including rootkits. All clear.
Thanks!

Microsoft released EMET 5.1 on November 10th which fixes compatibility issues with those programs under EMET 5. Here's the information on the fixes:
http://blogs.technet.com/b/srd/archive/2014/11/10/emet-5-1-is-available.aspx.
"Several application compatibility issues with Internet Explorer, Adobe Reader, Adobe Flash, and Mozilla Firefox and some of the EMET mitigations have been solved."

My macbook air 11" suddenly doesn't work with some software

this is the warning I saw: You can’t open the application “Install VectorWorks (A)” because PowerPC applications are no longer supported.
What's going on?? I erased my hard drive and I reinstalled it the Mountain Lion, and nothing happened. I need some advice. Thanks

if it's a PowerPC program, there is no way it works with 10.9 Mavericks. Search the forums and you will see hundreds of similar posts with the same answer. The only way to use a PowerPC program is with 10.6 or prior.

Logitech wireless mouse doesn't work with Linux 3.10

When I rebooted after updating to the 3.10 kernel my mouse stopped working. The cursor is displayed but it doesn't move. I downgraded back to 3.9.9-1 and it works fine again. As far as I could see it was detecting it in the dmesg output, so I'm not sure of the cause (maybe just a regression in the driver). I've never had any problems with this mouse before.
The mouse is a Logitech M515 connected wirelessly with a Logitech Unifying receiver.
This is the dmesg line (on 3.9.9):
logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-2/input2
Last edited by shaurz (2013-07-25 19:20:53)

Mine works fine with Logitech Anywhere MX, never noticed any problems. Is this still an issue?
According to the bug report, Logitech Anywhere MX should be broken I guess. If you need any info dumped to figure out why it's working for some, tell me what you need.
Kernel:
Linux xarch 3.10.3-1-ARCH #1 SMP PREEMPT Fri Jul 26 11:26:59 CEST 2013 x86_64 GNU/Linux
lsusb:
Bus 007 Device 002: ID 046d:c52b Logitech, Inc. Unifying Receiver
dmesg:
[ 3.332661] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:13.0-1/input2
( I have a keyboard attached to the same unifying receiver. Paired them up using a windows laptop. Maybe that's the difference? I guess pairing hardware to the receiver using logitech software could theoretically mess with... uhm... magical internal mapping stuff that I have no idea how it works? Ok, I'll stop guessing making things up now , good luck with the bug :3 )
Last edited by whoops (2013-07-29 10:54:39)

17" Cinema Display doesn't work with new MacBook Pro

I have used a 17" Cinema Display with a MacBook Pro without problems for the last year. I just bought a new MacBook Pro and a Mini DisplayPort to DVI Adapter. Hooked it up and no display. Reconnected to my olf MBP without the Mini DisplayPort to DVI Adapter and it still works great. Any thoughts?

I have the same machine and the same drive (for about 6 months) they work fine.
The first suspect is the internal SATA cable, replace it.

Dvi to hdmi works doesn't work with new tv

I have been searching constantly for several days, and I have not been able to find a solution.
I have been using a 32" Vizio HDTV as a monitor for my 2008 macbook pro via DVI to HDMI for over a year now. Recently, we purchased a new 39" Sanyo HDTV for out living room, and the screen continuasly flashes blue when I try to connect my laptop to the tv. I have also tested my computer on a 42" Sony TV, and it also works fine on that TV.
I am also able to run windows through bootcamp on every TV mentioned above except the Sanyo TV lags a lot in windows. Why can't I get my laptop to display properly on the Sanyo TV, (blue flashing in OSX and lagging in Windows 7)?
Should I try buying a DVI to Component/Composite cable? The Sanyo doesn't have a VGA port, but should I also try going from DVI to VGA to Component? The TV has no option for "game mode" or "image processing". I am lost of what to do.

I found an answer that helped me get my MBP talking to my Philips 42" Plasma TV on this discussion thread:
https://discussions.apple.com/thread/3196192?start=210&tstart=0
Here is what I did (in a Terminal window):
Commands (pasted here for your convenience):
cd /System/Library/Displays/Overrides/DisplayVendorID-410c/
sudo mv DisplayProductID-0 DisplayProductID-0.old

Intel Wireless Card doesn't work with Linksys?

My wired computer works great with the WRT54GX2, but my wireless cannot hold a signal for very long. Support says they can't help me because I have a Intel wireless card. Intel does not support for that card anymore and I can't see where to buy a Linksys card. Please, help.
Bonnie

check the link for the linksys retailers
Retailers
Message Edited by Maximus on 07-21-2006 05:48 PM
I do know everything, just not all at once. It's a virtual memory problem.

Wireless router doesn't work with Windows 8

Does anyone have experience with attempted installs of wireless routers using windows 8? I have tried to install three devices but they will not install for windows 8 and I can't find a single one that is. I don't need the internet just a router for my home wireless. Printer, mp3, etc. If you look at all of the Linksys specs online, none of them say they are compatible with windows 8 just up to 7. I have tried to install two Linksys routers and two Belkin routers and none of them will install due to windows 8 being my OS. I use a verizon hotspot for my 4g internet.

To sfd1117:
I am able to see your post in this thread: http://community.linksys.com/t5/Social-Media-Support/Facebook-com-WRT110-Internet-access-problem/m-p.... I’ve posted a reply but let me post it here:
If other devices are connecting without any problem through the router then the problem might be on the new laptop. First thing that you can try is check if the laptop can detect other wireless networks. If it can, try connecting to the other network. If it’s able to connect then it must have something to do with the wireless settings of the router. If it can’t then the problem might be on the built in wireless card of that laptop. Before calling the laptop manufacturer though, you can still try changing a setting (channel) on the router and see if the windows 8 laptop will be able to connect. For instructions, refer to this link: Changing the Wireless Channel on a Linksys Router.
By the way, what is the model number of your router?

Wireless Music doesn't work with new software

Similar Messages

Maybe you are looking for