Wireless N enabler doesn't work . . .

hi guys
just brought a Express N, took awhile to setup but it's working now.
problem is i can't seem to enable 802.11n on my macbook. Tried update, no luck.
Can my macbook be 'enable' in the first place?

Hi, You can only upgrade to 'n' if your macbook is a Core 2 Duo. The Core Duo models cannot be upgraded. Thanks.

Similar Messages

Error: wireless media transfer doesn't work

Good day.I have a problem on my Sony z Ultra. It can not make a wireless wi-fi connection with my PC. A few times i have connected my phone with PC wireless, but then it seem to be that I have something spoiled. Now PC tell me that "it isn't possible to coordinate device parameters with this system"What can I do in this situation?

Hey guysHave you read what the gentlemen above wrote?wireless media transfer doesn't work....not usb cable connection does not work.!!! I have the same problem.Can you please help me with it? Win7Pro64bit, Sony Experia Z1 compactI follow all the steps as given by the phone, it even says, the devices are pairedbut when I want the devices to connect, it just hangs and then gives me message "It isn't possible to connect to [yourpc]" Can you please give me some troubleshooting steps?What to check, where to look, how it works, links, articles, anything? please Thank you Hugo

Aiport extrem 802.11n enabler doesn't work

Hi everybody
I purchased a belkin N1 Wireless router. This allows the n connection and therefore I also purchased the 802.11n enabler.
The problem is, that this enabler says that I doesn't have the required hardware.
I have a MacBook Pro (Intel CoreDuo). What did I wrong?
Can anybody help me there?
Thanks in advance
PS: I also installed AirPort Extreme Update 2007-002

MacBooks with Core 2 Duo processors are eligible for the 802.11n update, but not the earlier MacBooks with the Core Duo processors.

Can receive but can't send fax. Connected wirelessly, web enabled, all else works. Photosmart 7510

Can't send fax. Wireless is working. Web enabled on, can receive faxes but can't send.

Hello,
The first thing I would do is follow step six in this document to set a static IP: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02817031&cc=us&dlc=en&lc=en&product=4023246&tmp...
When it askes for DNS information, enter in Google's DNS. Preferred DNS = 8.8.8.8 Alt DNS = 8.8.4.4
If that does not help, if you could provide me with the following information it would help me out. First, who is your ISP( Internet Service Provider, i.e. Comcast, AT&T, Verizon, ect.)? Second, who is the maker of your router? Lastly, what is the model number and firmware version of your router?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Autocomplete is enabled, doesn't work

Autofill used to work, but now it doesn't complete the URL whenever I type something in that it used to. I used to be able to type in "f" and have it pop up with Facebook already typed but now it doesn't do that. I've been in the about:config and browser.urlbar.autoFill is enabled, and I have my privacy settings set to have it use my bookmarks (put Facebook in my bookmarks as a test) so I don't know why it's not working.

Hello,
The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. <br>
'''Note''': ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Pixma MX432 wireless scanning function doesn't work

I just purchased a Pixma MX432 multifunction printer. I set it up for wireless connection. The printer portion works fine. When I run the MP Navigator 5.1 to run the scanner, I get an error message: Canon MP Navigator EX has stopped working. A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
I have used a Pixma MX 410 since July 2011, and it worked fine wirelessly for both the printer and scanner until about two weeks ago, when the wireless scanner quit working and I got the same message as above. I tried reinstalling the software with no success.
When the Pixma MX 410 ADF feeder quit working on a manual scanning function, I used my replacement guaranty and bought the Pixma MX 432. I still have the same problem.
My software is Windows 7.

Assistance needed, we purchased an PIXMA MX432 today, initially printing via LAN through an AT&T modem from two windows 7 64 bit OS laptops and one Apple Lion OS laptop. Went to dinner, came back can no longer print, message states that printer is not responding or is offline. Printer status: ON icon: green light. WIFI icon: blue light, unplugged waited three minutes and plugged back in. Same status, no print.

Portege A200 wireless on off doesn't work

hello guys someone please help. everytime i switch the wireless button on an error message comes up in a lovely blue screen. DRIVER_IRQL_NOT_LESS_OR_EQUAL
please help. this laptop is nothing but trouble, its well cute though. :)

Well really strange mostly such error message appears because of the hardware problem or because of the critical software malfunction.
If you enable the WLan switch at the notebook side the WLan driver should load.
Im not 100% sure but possible the Wlan driver causes this BSOD.
Try to uninstall the Wlan driver and enable the switch. It would be interesting to know what happens

My iphone is connected to wireless but internet doesn't work

hi,
my iphone 4s is connected to wireless, but the internet won't work. i know the internet is working, because i'm able to access it from my computers. and this problem is happening at every wireless network i've tried in the last 48 hours. it is connected to all the wireless networks, but is not getting internet. the phone works and i'm able to get texts. but none of the apps the use the internet are working. i do not have a data plan, so i can only access the internet through wireless.
i have tried all of the following:
i have restarted my phone.
i have reset my network settings.
i have turned off wifi networking in location services.
still no dice. any other suggestions, short of wiping my entire phone?

Hi there,
This just happened to me and was super frustrating! Thank you for your post and working out how to fix the bug. I have one question. After you reset your VPN in settings, did you resort your iPhone on your computer after? I am just wondering if restoring it now will help stop the bug happening in the future?!?!
Cheers!

802.11n Enabler Doesn't work with 17" MacBook Pro (2.16) Intel Core Duo

While I would believe that the computer does meet the requirements and that it does have the extreme card and after following the instructions -- checking the network utility ap, etc. It is very strange that you get a "Alert: Your computer does not meet the hardware requirements for this update." So you don't think that I am a fool, I did check the Network Utility and there is no "n" so it was never updated.
Is there any way to do this manually?
Thanks in advance.

The Core Duo machines don't have the newer Extreme card whose chipset supports 802.11n.
You can do some potentially warranty-voiding surgery, however, to replace the MBP's stock card with the Mac Pro Airport Extreme Upgrade card, which supports 802.11n and is plug-compatible with the MBP's stock card. It's available for $49 from places like PowerMax and Small Dog.

Wireless suddenly doesn't work, both in OSX and windows 7

I have got a new model of MacBook Pro 13-inch. Everything work fine until one day I found the wireless suddenly didn't work, both in OSX and windows 7(boot camp.)
I tried my USB-wireless adapter on macbook, it works fine.
In bootcamped windows 7, I have uninstalled and re-install the wireless adapter, still doesn't work.
Actually it can find the wireless networks but cannot join them.
I need to mention before then I kept play heavy games like starcraft2 frequently, and macbook got so hot during playing, so maybe the wireless module was damaged by heat somehow??
Seeking for help ~~~
Message was edited by: demax
Message was edited by: demax

Seems I'm pretty annoying but I need to post again because I found something interesting: once I plug my external monitor to the macbook, the wireless strikes, and once I plug out the monitor, wireless recovers... Anyone has any idea?
Message was edited by: demax

Wireless Mighty Mouse won't work properly with MacBook/tech support stumped

Hi. First post. Anyone heard of this problem? Appears to be location-sensitive. Problem described below, but first, short background...
Just bought entire Mac system after decades in corporate world with PC. Believed the TV ads that it would be simple. Already have been back to Mac store 6 times and have spent roughly 7 hours on phone with help line. Mac store even replaced Macbook entirely in case it was faulty logic board/Bluetooth circuit -- didn't help. Also, problem doesn't happen in store. So, to get to the point:
Wireless Mighty Mouse doesn't work properly when hooked up to Macbook -- herky-jerky, slow, unresponsive, sluggish, imprecise, intermittently better/worse. Went through a few Mighty Mouses and finally gave up; now using hardwire mouse and there's no problem. But before I return Mighty Mouse for refund, would like to see if there's a solution b/c I'd prefer wireless.
System is the latest little souped-up Macbook, 23" HD Cinema external monitor, external wireless Apple keyboard (which works fine), wireless Mighty Mouse (the culprit), Airport Express, HP printer. All brand new from local Mac store (Fifth Avenue, New York)... where the Genius counter folks have given up. I'm not convinced they believe me because (a) the problem doesn't occur there, and (b) after a couple of new Mighty Mouses, they finally just gave me a new Macbook to make me go away... but after going through the whole system setup once again, same problem. Have tried many different mousepads, BTW.
Tried all the stuff phone tech support suggested -- removing/installing/reinstalling software, etc. Airport works fine; using modem and printer connections there. Bluetooth works fine with keyboard. I've scouted around for intefering devices; even unplugged electrostatic loudspeakers and old tubed amps in living room (concrete wall separates rooms), unplugged hifi in same room, etc. On 40th floor of Manhattan hi-rise; concrete walls between neighbors. Have never had interference before with anything; previous PC system worked fine with Microsoft wireless (optical) mouse.
This is no longer urgent because hardwired Apple mouse works well. It's just mysterious.
Any thoughts?
Other than that, I like the Mac environment so far. Fifth Avenue store is cool, also, because it's open 24/7.
Ken
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM
Macbook Mac OS X (10.4.9) 2.16 Core 2 Duo, 2GB 667 HHz DDRS SDRAM

Hey, thanks! That was fast. I'm impressed by the Mac community.
This program helped my hardwired mouse, actually, and did give me wider parameters on the wireless mouse, but it didn't correct the herky-jerky/sluggishness -- actually amplified those problems.
Ken

Enable wireless doesn't work like expected

Hej,
When I press my wireless-button on my laptop, a popup shows up saying "Wireless hardware enabled". However, I have to click the "Enable wireless" checkbox in the networkmanager applet to really enable wireless networking. I don't think this is how it's supposed to be and find it actually quite annoying... Can anybody confirm this?
Cheers
Locke

You don't even mention what is installed/used on your system (looks like one of the big DEs)....

Wireless keyboard sk-2061 sleep key doesn't work. How do I get it to work?

The sleep key doesn't work on my HP SK-2061 wireless keyboard. How do I get it to work?

Hello @SunLovinGran,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your wireless keyboard's sleep key doesn't work. Is your computer able to enter sleep mode by itself after a certain period of time? Are you able to enable sleep mode using a different keyboard?
In the meantime, I recommend following the steps in this document on Wireless Keyboard and Mouse Troubleshooting. This should help diagnose any possible issue with how keys or buttons are input using your keyboard.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either.

My Canon MX 922 does not scan. My printer is connected via cable. Wireless doesn't work either. I get an error message with multiple suggestions but none of them apply to my situation.
I am so dissatisfied with this printer. I'm sorry I got it from Amazon because now it is a hassle to return it. I will never buy another Canon.
The printer menus are confusing. I hate using it. I loved my previous Canon which finally stopped working after many years, that's why I purchased a newer Canon model. Never again. Stick with cameras.
Marcy Hotz

This note won't be as angry and frustrated as the last one...
Because I still had my old printer drivers and other applications on my hard drive, I think the application was trying to connect with the old printer. I deleted all the old stuff.
I also had several scanning applications on my drive which just confused me.
When I used the actual Canon MX922 application, I was able to scan but could only save as JPG, TIF or BMP (and one more, I forget which). So I did some research on the Canon site and found out how to save documents as PDF files using the Canon IJ Scan Utility.
It works now. So I'm satisfied, will keep this maching. I just had to take some time, sit down and focus on the problem.

My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time?

My new iMac has recently had OSX Lion installed on it and now when I start the machine it looks like its updating something every time, and the wireless doesn't work. So I restart and everything is OK - until I have to start up again the next time - then I have to repeat this again! Any help appreciated.

I've been having the same issue, but have just discovered something on my own that hasn't been pointed out in any of the forums I've visited. In what I thought would be a vain attempt to help myself, I went to System Preferences, Users & Groups, and then clicked on Login Items. I discovered that one of the Items that was listed to open automatically upon login was iTunes Helper and that there was an exclamation point beside it indicating that it was incompatible. I simply deleted that item and now I don't have the situation you described and my wireless is connected. Hope this helps!

Wireless N enabler doesn't work . . .

Similar Messages

Maybe you are looking for