Wireless net keeps droping and reconnecting?

Hi! Ive had leopard installed on my macbook since it came out and had no problems. Now all of a sudden its deciding to copy windows and be ********. My wireless internet keeps dropping completely and reconnect itself.. anyone else have this issue? Oh.. now it figures its not doing it.. this is annoying.

I'm having the same problems with Leopard. I have about 6 wireless devices, including the iPhone, none drops the wireless connection. Until I installed Leopard, my MacBook was fine on my wireless, but once I installed OS X 10.5.1, it started dropping the connection everywhere I go. Its really annoying and there seems to be no reason for it.
There are no definite things I am doing that cause it to drop. I hope Apple releases 10.5.2 quickly, and it fixes this.

Similar Messages

  • Wireless keyboard keeps disconnecting and reconnecting

    My Wireless Keyboard keeps disconnecting and reconnecting and typing by it self!! any ideas?

    Hi,
    Yes believe it or not my problem was caused by the keyboard being too close to the iMac display, the bluetooth was infering with the other radio signals coming from the antenna, it needs to be at least 1ft away from the display (30cm) to prevent this (this won't help those of you with small computer tables/desks)
    Hope this works for you....
    iDave

  • Wireless Connection Keeps disconnecting and reconnecting

    I recently got a new router to replace my old one (which had the same issue) and it frequently disconnects randomly for a couple seconds then reconnects again. This seems to only happen to anyone using wireless connections and not when its connected with an Ethernet cable. I've even changed the router channel and the problem still persists and its not near anything the could disrupt the signal so I don't understand.

    With the same issue on 2 routers, it's probably not a defective router.  But it could be the settings.  As Matt suggested check your security settings and the wireless mode.  If all of your devices are "n" use performance mode.  Otherwise use compatibility mode.
    Inssider (available for free at the following link) will show you other devices and enable you to pick the best channel. 
    http://www.metageek.net/products/inssider/
    Is the problem is on multiple devices or just one?  If it's only one the issue could be the wireless card.
    Since it is a wireless problem think about distance and obstruction.  They will reduce signal strength and could cause intermittent problems.  Try testing close to the router and see if the same problem occurs.  Router positioning can improve signal quality.  Don't overlook little things.  Example: many users stand the router up.  I found that I get better reception with it laying on it's side.  And one of my laptops has a significant change in performance by rotating it 90degrees.  The kind of problem you are having may need some trial and error research to solve.

  • Controller keeps disconnecting and reconnecting

    Hi thereI have recently had a problem with my Dualshock 4 controller connecting to my PS4. I took ps4 to my dads while i was staying there and everything was fine. Since i returned home i set up ps4 as normal but my controller keeps disconnecting and reconnecting itself. It is not a charge issue as it has been charging for 2 hours now. I am just sitting on the home screen now and controller is plugged in by usb cable and just keeps connecting and reconnecting but remains on charge when it disconnects. Any help would be much appreciated

    Turn off the PlayStation 4 by pressing the power button on the front panel. The power indicator will blink for a few moments before turning off.Once the PlayStation 4 is off, press and hold the power button. Release it after you've heard two beeps: one when you initially press, and another 7 seconds later.Connect the DualShock 4 controller with the provided USB cable and press the PS button on the controller.Choose option 5 rebuild database.For home hub. Open the web browser on a computer or device connected to your Hub and go to http://bthomehub.home to open the Hub ManagerClick on SettingsEnter the admin password. Unless you've previously changed it, you'll find the default password on your Hub settings card on the back of your Hub. If you have changed it and now forgotten it, you can use the password override feature to set up a new passwordClick on the "Advanced Settings" tab, then click Continue to Advanced SettingsClick on the "Wireless" tabTo manually select the wireless channel for the "2.4 GHz" band:Go to the 2.4GHz page and select a channel from the drop down menu next to "Wireless Channel". First try channels 1, 6 or 11Click Apply to confirm the change. Then wait 60 seconds for your computer to automatically discover the new settings. There's no need to change any settings on your computer 

  • Internet keeps disconnecting and reconnecting.

    Hello
    I have Verizon fios, and my internet keeps disconnecting and reconnecting immediately, over a 10 minute period, many times a day.
     I am not wireless. Im directly connected to my router.  It seems to happen at the same time each day, lately its been getting worse, it will happen about 3-4 times a day .  It will start disconnecting, then reconnect, every minute or so, for about 10 minutes.
    Ive contacted verizon over the phone, they kept saying to check my router and wire (which I did, and everything seems to fine), after a while on the phone with them, they just hung up on me.  I checked my router,wire,computer, and everything is fine there.
    Can anyone help me? This is beginning to be a major issue.
    Please help
    A.W.

    I was having this exact symptom for weeks and it was driving me crazy! However, I did find the problem and a solution and maybe it will benefit others as well.
    Problem: I had added another device that had a static IP that conflicted with my router's IP.
    Solution: In my case, I changed the other devices static IP, but you could also set the other device to use DHCP (best) or change the Verizon device IP.
    This can occur for a variety of reasons, but the most common is when you add another router (like a wireless router). Another common cause is that another device on your LAN is running a DHCP server, and since the Verizon router is expecting to be the sole DHCP server they can server the same IP #s out. I've had many cases where a Windows machine just magically started serving DHPC requests, and all versions of Windows I've tested for some reason have the DHCP server running by default! 
    Hope this helps! 

  • Keeps disconnect and reconnect

    I have a retina Macbook Pro 13"(latest), iPad(3rd genernation), iPhone 5 and iPod shuffle(latest) and I am sure all their systems as well as iTunes on my Macbook Pro are latest version. The thing is that whenever I connect my iPad and iPod shuffle and try to sync using iTunes it just keeps disconnect and reconnect. At frist I thought there might be some problem with my USB port, so I tried both of my USB ports and it keeps behave like that. And the wired thing is, it did not happend to my iPhone 5 so far. So it is most likely that there are problems with the iTunes.
    So I just want to ask is there anyone encounter the same problem and if you know how to fix this problem plsssssss tell me. Thx.

    I think these problems were hopefully solved by recent update of Itunes.

  • Lync 2010 Version 4.0.7577.4445 Keeps disconnecting and reconnecting

    Hello,
     I have Lync 2010 Version 4.0.7577.4445 Keeps disconnecting and reconnecting. I have checked my network and its on a 100Mbps link, and stable/no errors logs. This occurs randomly every several minutes. I have a wireshark capture if it helps your team
    analyze the issue.
    Daniel

    I have been meaning to summarise this on my blog for a while - http://www.lync.geek.nz/2014/06/lync-client-constantly-signs-in-and-out.html
    Andrew Morpeth
    Lync Server Specialist - Auckland, NZ
    Check out my blog

  • My iphone keeps connecting and reconnecting

    I'm trying to connect my iphone to my pc.  It keeps "connecting" and "reconnecting".  Its getting very frustrating.  I'm not sure why its doing this.  First an error comes up that says "iTunes cannot install apps to iPhone "Ryan's iPhone 4S" because the apps installed on the phone could not be determined."   another error is "The iPhone "Ryan's iPhone 4S" cannot be synced.  The required disk space cannot be found".
    what should I do now??

    Clean iPhone Dock Port with a clean dry toothbrush. Try different USB Cable. Try different USB port on computer. Try different computer.

  • MacBook keeps disconnecting and reconnecting wirelessly

    I need some help, and I cannot seem to figure this out. In my office I have a 20" IMAC running Leopard with a Netgear router attached. When I try and connect wirelessly through my MacBook the connection keeps dropping and restarting and reassigns a new IP address everytime. This is quite annoying as it happens about every 15 seconds. Any suggestions on how to fix this or work around this.
    Thanks for any help.

    It does seem to be a cable issue although the iPhone got no problems.. Mysterious.
    Thank you

  • WAG54G2 keeps disconnecting and reconnecting.

    The problem started a few days ago.
    Information:
    Country: Egypt
    ISP: TE Data
    OS: Win 8
    Router: Linksys WAG54G2
    Connection: Ethernet cable and wireless for laptop.
    Speed: 2mb
    Steps i have tried so far:
    Contacted my ISP, all good on their end.
    Had a telephone guy come over to plug the router straight to the main line.
    Unplugged the router cable and reconnected it again 30 sec later.
    I have searched the internet for the answer but to no avail.
    Thanks
    Pets19

    If you are experiencing frequent disconnection from the wireless network, you may check the following factors which can greatly affect your wireless signals:
    • 2.4 GHz interference
    Your ADSL gateway may be operating on the same frequency as your cordless telephone system or other nearby equipment.  Try to change your ADSL gateway’s channel to 1 or 11 and restart the wireless computers.
    NOTE:  The default gateway channel is 6.
    • Physical obstructions
    Your ADSL gateway or wireless computers may be losing connectivity because of physical obstacles, including thick walls and floors.  You can physically move the equipment to different locations to find a better link.
    • Surroundings
    Keep the ADSL gateway away from large metal objects, bodies of water (fish tanks, bathrooms), and any electrical equipment including television sets, microwave ovens, radios, etc.

  • TS3367 FaceTime keeps disconnecting and reconnecting while in use. I have 3mbps connection speed

    When using FaceTime, it keeps disconnecting and then reconnecting. I have a 3mbps connection speed, anybody with similar problems and a resolution?

    Try restarting your phone and computer. Make sure itunes is up to date. Try different USB port.

  • IPad keeps connecting and reconnecting on Macbook Pro using USB.

    For the past month or so my iPad hasn't been able to connect to my 2013 Macbook Pro. I've tried solutions such as reinstalling iTunes and updating software but nothing has worked. I can connect to my PC fine but when I try to connect to the Macbook, it keeps quickly connecting and reconnecting. When I connect to the Macbook it gives me the message "iTunes could not connect to this iPhone. This device is no longer connected.". This seems to be a problem with the Macbook instead of the iPad. I haven't enabled it to connect over Wifi also.
    I've tried looking up solutions for people who have had similar problems but I haven't yet found a solution that worked for me. Any help is much appreciated.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    The title of the Console window should be All Messages. If it isn't, select
              SYSTEM LOG QUERIES ▹ All Messages
    from the log list on the left. If you don't see that list, select
              View ▹ Show Log List
    from the menu bar at the top of the screen. Click the Clear Display icon in the toolbar. Then take one of the actions that you're having trouble with. Select any messages that appear in the Console window. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
    The log contains a vast amount of information, almost all of which is irrelevant to solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
    Please don't indiscriminately dump thousands of lines from the log into this discussion.
    Please don't post screenshots of log messages—post the text.
    Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Charger keeps connecting and reconnecting ?

    I have had my new iTouch5 for about 6 months and just recently have had this annnoying problem whenever I plug my charger in to my iPod it connects but whenever I movie my ipod it disconnects or bump the iPod it disconnects. The iPod itself works perfectly until I need to charge it or sync it. The charger is plugged in fine and tight but I still get the disconnect and reconnect isssue. Whenver I sync on my Macbook Pro 2012 model I get this annoying message:
    The USB device is drawing to much power and has been disabled. I an live with this because all my music is in iCloud and I can sync it from there wirelessly it is just the charger disconnecting and reconnecting issue. I am using a wall socket to charge it if that helps.
    If you can help this would be appreciated
    Regards Adam (monerz)

    Very likely a bad cable
    - See:      
    iPod touch: Hardware troubleshooting
    - Try another cable. Some 5G iPods were shipped with Lightning cable that were either initially defective or failed after short use.
    - Try another charging source
    - Inspect the dock connector on the iPod for bent or missing contacts, foreign material, corroded contacts, broken, missing or cracked plastic.
    - Make an appointment at the Genius Bar of an Apple store. If defective and not abused Apple will exchange it under your warranty
      Apple Retail Store - Genius Bar                 

  • Why does wifi on my iPod touch keeps disconnecting and reconnecting

    I'm near a good router with three bars of wifi, yet it keeps disconnecting then reconnecting. This may be an iOS 5.1 issue.

    Try:
    - A reset. Nothing is lost
    Reset iPod touch:  Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Power off and then back on your router
    - Reset network settings: Settings>General>Reset>Reset Network Settings
    - iOS: Troubleshooting Wi-Fi networks and connections
    - Restore from backup
    - Restore to factory defaults/new iPod
    - You could also have an interference problem from another device like micrwave or other device.

  • Network Adapter keeps disconnecting, and reconnecting.

    I am using an Intel NIC and the e1000g driver. Using DHCP it keeps saying e1000g0 connected, gives the IP address, and then says it has been disconnected. I have also tried this on a Realtek NIC using the RTE driver. Also in VMWare workstation, I get the same error. What am I doing wrong?

    Hi....I called Apple Tech again because my apple care ran out and I have to pay $49. for tech support, but which is good for 30 days for the same problem you called about.
    I have NEVER had problems with it disconnecting before with my wireless network with my express as a remote base station off of my airport extreme....even if my computer went to sleep after inactivity.
    What the tech guy told me today is that my computer does not support WPA personal security nor does the Express so we reset everything and it worked...and then bingo, it disconnected again and then reconnected.
    I am wondering if there is someone in my apartment building with a 2.4 wireless phone or something which is causing me to disconnect as this can happen.
    But, the weird thing is that this only started happening after I had it fixed at the the apple store which set me back $156.00.
    I am pretty good at setting up my network....I also wonder if my Time Warner cable modem is causing it. I am going to call them to replace it and see if there are any changes.
    It's just the thing that this only started happening after it was repaired at the apple store.
    That makes me wonder what could have happened? The computer doesn't "die", it just knocks me off the network.
    When you are setting up your network with Express and the Round older Airport Extreme, just make sure if you are using an older computer like my Powerbook G4, you only use WEP security encryption is what the Apple Tech Guy told me.
    But then, when I have called three times to try to get this fixed, every tech person tells me something different to do.
    Anyone have any other ideas?
    I have set my computer to not go to sleep to try your idea.
    Thanks...but does anyone else have any clued to what can be happening?

Maybe you are looking for

  • Nothing works on Win 8.1

    Since updating to CC 2014, none of the key 2014 applications are working properly. Syncing is greyed out or not working, or reporting "sync failed" on all the apps that are supposed to sync. Illustrator Welcome screen remains blank with spinner runni

  • Unjar weblogic.jar

    i installed Axis as my soap engine on weblogic, but the wsdl does not work. as suggested, i unjared weblogic.jar and took out jaxp package from the expanded directory and then jared everthing else together into weblogic.jar but when starting weblogic

  • Submit button not working with gumby

    I am using Gumby (http://gumbyframework.com/) on our home page. The page is very simple with no fancy js. In Gumby there is a submit button (http://gumbyframework.com/docs/ui-kit/#!/buttons) which lets you ..... well, submit forms. Not in FF!! When I

  • Process order - material component deleted

    Hi, I would like to know where can I check if a material component has been deleted in a created process order. Would there be any history for this?

  • Weird ripple effect after export to .jpg

    I have been attempting to create star trails for the past couple of weeks.  I'm using a Canon T3i, shooting in RAW forward and the lens is a Canon 40mm pancake lens. When I look at the 200+ layer image in Photoshop CC, it looks like this: Looks okay.