Wireless network controller drivers

where can I find hp 14 HP 14-d037tu wireless network controller drivers. it's running windows 7 ultimate 64 bit
This question was solved.
View Solution.

Hi:
Based on the hardware ID's you posted, these are the drivers you need...
Wireless:
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_131223_1
Bluetooth:
http://h20565.www2.hp.com/hpsc/swd/public/detail?swItemId=ob_130390_1

Similar Messages

Refreshed pc and lost all network controller drivers

Upgraded to Windows 8. Made file history backup then clicked Refresh My PC & it uninstalled ALL of my Network Controller Drivers, so no more Network connections or settings of any kind. The only Recovery DVDs are for W 7. Do I have to reinstall 7 & then 8? With my 3 System Recovery DVDs, I also got an Application and Driver Recovery DVD. Can I Use that one to recover just the drivers I need without reinstalling the whole W 7 system from the other DVDs? Much Thanks in advance!

Hi:
I will need the HID"s for the unknown devices.
Install this driver first and reboot.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110503-1&cc=us&dlc=en&lc=en...=
The rest of the drivers you need are:
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110126-1&cc=us&dlc=en&lc=en...=
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-111691-1&cc=us&dlc=en&lc=en...=
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-110512-1&cc=us&dlc=en&lc=en...=
One of the unknown devices is probably this...
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-116584-1&cc=us&dlc=en&lc=en...=

HT3983 Network Controller Drivers & Bluetooth Peripherals Driver Required

Network Controller Drivers & Bluetooth Peripherals Driver Required

In Bootcamp Asistant there is an option to download the support drivers. Plug in your USN and tick just that option and let it download them. It will take a while as it's downloading more than 700MB

Nvidia Networking Controller Drivers in Vista BootCamp ????

I have installed Vista 32bit in BootCamp 3 on my new 13" Macbook Pro, all seemed fine but for some reason, Vista does not recognise the Nvidia Networking Controller driver installed from the bootcamp drivers, it says it failed to load the driver when checked in Device Manager.
Also, I have problems which I think relate to the Broadcom Wireless driver too. Signal strength when running in Snow Leopard is full bars, no problems. But when booted into Windows the wireless signal strength is one bar and oh so poor.
I have to move within a couple of meters of the router to get a good signal.
What is wrong with these drivers ???? i thought Apple supported Vista ????
I have read elsewhere of people suffering at the hands of the poor Broadcom driver, is there any update from Apple for this, or does anyone know of a new version of the drivers from Broadcom at all that give better performance ???
Same with the Nvidia driver, anyone know what to do about that, Apparetnly you can't just go to Nvidia and download the Nforce from there as the Apple OEM drivers are different and I dont even know which Nforce version the laptop uses anyway.
Please Help - Going Insane - Grey - And VERY bald!!!

Anyone have any ideas about this at all ????
I have updated bootcamp to 3.1 now but nothings changed. I did switch on Afterburner, disabled low power consumption and also changed the driver to use b/g/n auto which has helped slightly but not dramatically. As I have said OSX runs full signal so I know theres no router signal issue.

Network controller drivers windows 7, pavilion dv6-6100ax

I've had a HD fail and have had to replace it with another.
I also cannot find the oem recovery disks that came with laptop.
Have managed to install Windows 7 Home premium and update all drivers except for one!
in device manager it comes up as network controller in other devices, says location is PCI bus 3, device 0, function 0
I've gone through all the drivers on the HP site and none have helped with this issue.
I can't connect to a network or internet with it atm due to this driver. Using another laptop to download drivers and research etc.
Any advice or help would be greatly appreciated.
This question was solved.
View Solution.

Hi:
My understanding is that your PC comes with a Broadcom wireless network adapter.
Below is the link to the driver you need for that card.
http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&dlc=en&lc=en

15-e020ax specification request (USB + network controller drivers windows 7)

Hi there,
The long and short of this is that I can't get find Win7 USB + internet drivers for my HP Pavilion 15-e020ax notebook, because A: win7 isn't supported and B: there are no specifications provided by the Hp website -
http://h10025.www1.hp.com/ewfrf/wc/documentSubCategory?tmp_rule=29031&tmp_task=prodinfoCategory&cc=u...
Am I in the wrong place? I don't mind going hunting for the appropriate drivers, however the AMD chipset drivers didn't work, and a computer with 1 functioning USB port on it and no net is... well, a doorstop ;-)
If anybody could advise as to where the product specifications are available, and/or where I can find drivers that would enable me to use my usb ports + lan/wifi, that would be greatly appreciated!
Thanks and kind regards,
Dean
PS: A note to the HP staff, I wish to contribute to the body of user feedback, if you're open to it :-)
Although the physical machine is an exceptional little beast ( ^_^ ) the lack of support for Windows 7 on this and the other HP laptop I bought (an awesome 17" e049wm) have left me struggling for several weeks now simply to get them operational. Most of the clients I work with (especially in empoverished regions) have just barely moved from Vista to 7, and I was surprised to buy two ~fresh-off-the-press laptops that couldn't handle Win7 (I refer the forum administrators to http://www.w3schools.com/browsers/browsers_os.asp). If the wc3 statistics are correct, Windows 7 use has decreased by 2% since the advent of Win8 in 2012, and is still far and away the most popular operating system in the sample. This is more than 3 times the user base of Windows 8. More than 3 times.
Sweet, /rant :-) I hope you would consider this and forward it to the appropriate section of your otherwise excellent company. Cheers!

Hi:
I don't work for HP, but HP only supports a handful of consumer PC's with drivers for windows 7.
They will never release a full range of driver support for all of their consumer products.
I'm sure that is because it costs more to develop and maintain drivers for multiple operating systems, which would drive the costs of the consumer products up.
HP only provides support for multiple operating systems for their business PC's.
HP is aware that the general market is not reacting favorably to W8, and therefore has introduced a small line of new consumer PC's that do come with W7.
If you want to purchase HP PC's with windows 7, here is a link to the models available with that OS.
http://shopping.hp.com/en_US/home-office/-/static/page-hp-windows7?jumpid=ps_r329_hhosem&aoid=51410&...
The good news is that you can install W7 on almost every HP consumer PC on the market if you are willing to, and know where to find the appropriate drivers you need.
I googled the model you are working on, and you need to download and install the amd chipset drivers and reboot.
You want the first file listed on the webpage. That will install the smbus and usb 3 controllers.
http://support.amd.com/en-us/download/chipset?os=Windows%207%20-%2064
Graphics:
http://support.amd.com/en-us/download/mobile?os=Windows%207%20-%2064#amd-catalyst-packages
Ethernet: DL and install the second driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=14&PFid=7&Level=5&Conn=4&DownTy...
Card reader: DL and install the first driver on the list.
http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=15&PFid=25&Level=4&Conn=3&DownT...
I don't know what model wireless card that model comes with, but I can post the link to the driver you need if you do the following...
Go to the device manager, find the Other Devices category, and click on the Network Controller needing drivers.
Then click on the Details tab at the top of the network controller window.
Now you see a Property drop down list and it is defaulted to Device Description.
Drop down on that and select the second item on the list (Hardware ID's).
Post the top string of characters that begin with PCI\VEN

Missing Ethernet, PCI, and Network Controller Drivers

I recently reinstalled Windows on my fiance's laptop, and now it wont connect to wi/fi. The device manager is showing that there is no drivers for the Ethernet controller, PCI Device, or Network controller. How do I fix this? Thanks!

Hi, Network controllerhttp://ftp.hp.com/pub/softpaq/sp53501-54000/sp53753.exe Ethernet controllerhttp://ftp.hp.com/pub/softpaq/sp52001-52500/sp52421.exe PCI Devicehttp://ftp.hp.com/pub/softpaq/sp52001-52500/sp52186.exe Regards

Ethernet controller/network controller drivers needed for Satellite C660

Hi
Yesterday i installed Win7 64bit in my Toshiba Satellite C660-26Z and ethernet controller, network controller and PCI simple communications controller drivers are missing.
I don't have recovery disc
So if anybody knows where to get it and how to install it...then plz help me....:)
Thanks

Hi
All drivers you can find on Toshiba download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp
There you can find Realtek LAN driver version 7.023.0
If you need WLAN driver, you can download from Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/
Your notebook has Realtek RTL8188CE WLAN card inside.
If you need more help let us know.

TECRA R850 - wireless network controller driver not found

Hi,
I re-installed my computer, since then it doesn't recognize any wireless device or network
here-after is part of the result of the Toshiba diagnostic tool
The device manager states that:
" The drivers for this device are not installed. (Code 28)
There is no driver selected for the device information set or element.
To find a driver for this device, click Update Driver.
However I cannot manage to find the driver, after updating the Windows updates, etc
Please help!
Thanks
lavver
Date 2013/03/15 22:55:35
[PC Information]
Model Name TECRA R850
Part Number PT524E-005014BT
Serial Number 4B021792H
OS Version Microsoft Windows 7 Professional 6.1.7600
BIOS Version Version 3.60
CPU Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz
Physical Memory8192MB RAM
Hard Disk Capacity304,562,036,736 [Byte] 283.646 [GB]
Hard Disk Free Space Capacity126,578,688,000 [Byte] 117.886 [GB]
Video Intel(R) HD Graphics Family version=8.15.10.2291
Screen Resolution1366 x 768 Pixels
Color Quality True Color (32 Bit)
Sound Realtek High Definition Audio version=6.0.1.6271
Intel(R) Display Audio version=6.14.0.3074
Network Intel(R) 82579V Gigabit Network Connection version=12.2.45.0 MAC Address=E8:9D:87:EA:3C:21
HUAWEI Mobile Connect - 3G Network Card version=6,0,1,279 MAC Address=00:1E:10:1F:82:A7
Modem HUAWEI Mobile Connect - 3G Modem version=2.0.6.706
Internet Explorer9.0.8112.16421
IDE Device Hitachi HTS723232A7A364
MAT****A DVD-RAM UJ8A2AS FW version=1.00
[Diagnostic Results]
CPU TEST DONE PASS
MEMORY TEST DONE PASS
Enhanced Host Controller - 1C2D)
Enhanced Host Controller - 1C26)
i.LINK TEST DONE NOT FOUND

Your Tecra has ATHEROS 802.11(B/G/N)WB195-HMC W/ BT WLAN card inside and all latest drivers you can find on Toshiba WLAN portal - http://aps2.toshiba-tro.de/wlan/
Check it out please.
It is card with BT so before you install WLAN driver install BT filter. You can find it on Toshiba download page - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

Dell Wireless WLAN Card Wireless Network Controller stopped working and was closed.....

I am currently receiving the above "pop up" in the bottom tool bar.....I have contacted Microsoft, Dell support....completed three system restores, reinstalled/uninstalled drivers, etc. etc......can ANYONE help with this issue??? When I go to start, Dell wireless, etc.....this does/will NOT come up...
NORMALLY...there are two(2) icons in the bottom right hand tool bar....1=green signal bar code & 2=computer to computer conection.....the first is no longer present....this is really annoying and I wish to get corrected asap! Everything in/on the computer is working ok.....I even have INet connection!!! PLEASE ADVISE.
Dell 1721 Laptop with wireless internal card(?).......Del, after 1 1/2 hours....and no "renewal" of warranty....hung up on me.....imagine that!
Solved!
Go to Solution.

After many, many hours....I finally gave in & called 800 support....
it went through four levels and finally ended at a superior tech. software/hardware
writer/installer person....took 2 minutes and he was done!
Thanks!!!
Now....as of today...#2 laptop will not work!!!!! Here I/we go again....

K9N sli premium-PCI device and network controller drivers missing on CD

Can anyone tell me where to find this drivers ???
Rune

This link should help you further:
>>Link<<

Pci and network controller drivers

the hardware IDs
PCI\VEN_168C&DEV_0036&SUBSYS_217F103C&REV_01
PCI\VEN_168C&DEV_0036&SUBSYS_217F103C
PCI\VEN_168C&DEV_0036&CC_028000
PCI\VEN_168C&DEV_0036&CC_0280
PCI\VEN_10EC&DEV_5229&SUBSYS_2194103C&REV_01
PCI\VEN_10EC&DEV_5229&SUBSYS_2194103C
PCI\VEN_10EC&DEV_5229&CC_FF0000
PCI\VEN_10EC&DEV_5229&CC_FF00
please I am using win7 32 bits and cann't locate the drivers

Hi,
Please try:
1. http://ftp.hp.com/pub/softpaq/sp63501-64000/sp63802.exe
2. http://ftp.hp.com/pub/softpaq/sp52501-53000/sp52798.exe
You may also need the following driver for Bluetooth:
http://ftp.hp.com/pub/softpaq/sp64501-65000/sp64678.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

MacBook Pro will not connect to Cisco Wireless Network

I have just bought a brand new MacBook Pro, running Leopard (OSX 10.5.1) and I just cannot get it to connect to the Wireless Network at my workplace.
The MBP connects to wireless network and authenticates just fine, but will not obtain an IP address from the DHCP server.
The wireless network consists of 16 Cisco Aironet 1200 Access Points controlled by a Cisco Wireless Network Controller. It does not broadcast its SSID and is WEP 128-bit hex protected.
Changing the network from WEP to WPA is out of the question for me as this is under the control of my customers IT Department and they do not have any problems with their PCs connecting to the network. It appears to be an Apple issue.
For reference, my old Vaio PC, my Nokia N95 and my iPod Touch ALL connect to the same wireless network without any problems whatsoever, first time, every time!
If I boot into Windows XP from my Boot Camp partition, XP can connect wirelessly to the network without any problems, so it is not MacBook hardware related...
It has to be a bug in Mac OSX... doesn't it?!?
Things I have already tried (following suggestions on many forums):
* Switching Airport off/on
* Deleting various network-related Plist files and rebooting
* Manually assigning an IP Address (not really permitted but doesn't work anyway!)
* Disabling all network adaptors except Airport
AP Grapher shows that the MBP is connected to the wireless network, at good strength, and packets are being sent and received, but Internet Access is not possible as no IP Address has been assigned. Instead, my MBP shows a 169.* IP Address (self-assigned). It should be a 10.1.255.* address.
Can anybody please help? Thank you.

i posted this same reply elsewhere because it worked for me for my Buffalo wireless router: try manually setting your IP address instead of relying on DHCP, which sometimes (I don't know why) doesn't work well with Macs. It's a good get around. I am a happy Mac user but nothing is perfect on earth, and when the Mac gives problems, it does give a lot of frustration. Macs are not as easy to troubleshoot as Win because a Mac is built to be user friendly(and it works most of the time), meaning a lot of the background computing stuff is hidden away from users to avoid user accidentally upsetting some settings.
Unfortunately, the highly automated troubleshooting wizards provided by OS X are not perfect so when these software wizards fail to resolve the problem, like my Network Diagnostics, I have to spend more time tinkering around. There's "Terminal" of course but then most of us, especially PC converts to Macs, don't know how to use it.
You should also try updating your MBP, see if there are any new updates being released.

Atheros AR5007EG Wireless Network Adapter - With any driver: "The device instance name is invalid"

Hello there,
I was trying to install various "Atheros AR5007EG Wireless Network Adapter" drivers, with versions ranging from 2007 to 2010, both from the manufacturer and specifically for this computer (a Fujitsu Siemens Esprimo Mobile) and others from here:
http://www.atheros.cz/atheros-wireless-download.php?chipset=22&system=3
All of them are for Windows Vista 32bit.
The computer had previous drivers installed and working, but also had a network problem. In the process of figuring out what was causing it, I tried to install newer drivers to see if that was the problem. It turns out the network problem was due to a different
thing that is now fixed (some dependencies of the WLAN Configuration service were turned off), but I'm still stuck installing the new drivers.
TL;DR:
However, every time I install new drivers, after install, Windows says that
"The device instance name is invalid", regardless of what drivers I install. I even tried to install drivers for different hardware in that slot just to see what it told me and IT STILL gave me the same error. I also tried to uninstall the
current driver, checking the box to delete the driver's software, running CCleaner and then deleting
"athr.sys" from the Windows/Drivers folder and
"oem8.inf" from Windows/Inf as those files were referenced in the driver's properties. The install still gives me the same error.
The fact that it gives me this error with any driver leads me to believe it's Windows' fault and not the driver's.
Note: I am translating from the original in Portuguese. "The device instance name is invalid" is the closest/correct translation and seems about right with the info I find online regarding the english version of Vista and how it refers to devices.
This (https://groups.google.com/forum/#!topic/microsoft.public.development.device.drivers/yFa_XnlcLJQ) and this (http://finderr.net/windows/pt-PT/O-nome-da-inst%C3%A2ncia-do-dispositivo-%C3%A9-inv%C3%A1lido-/2082573452) also seems to confirm that, though it
doesn't help me. It may be that the text is actually different in english Vista but I also searched for driver instead of device or stuff like "The device instance name appears to be invalid" and can't find anything either.
I also did SFC /SCANNOW a while ago and it found no errors. I then repeated it again after this problem and this time, SFC found errors BUT it couldn't repair all of them. Here is the CBS log:
https://www.dropbox.com/s/bayum2rsezxpmre/CBS.log
Thank you for the help!
EDIT: The Notebook model is a Fujitsu-Siemens ESPRIMO Mobile V5535 and their support drivers can be found here (after specifying the OS and model):
http://support.ts.fujitsu.com/download/ShowFiles.asp
EDIT2:
The last SFC /scannow scan repaired everything left to repair. The system restore option can't be used because the earliest one still has the (suposedly faulty) drivers installed.
This computer has a Win Vista serial number, but no CD and the second partition doesn't have any kind of backup. The second partition is empty though. So, as a last resort, if I really don't have a choice, I'll try to do an upgrade install to see if that fixes
it and if that still doesn't fix it I'll have to move everything in the users folder to the second partition and format the first which is a bummer :/
EDIT: Here is the setup.api.log that was inside C:\Windows\Inf and details the instalation process of all the drivers:
https://www.dropbox.com/s/tyxs1e4r7rxofch/setupapi.dev.log
I'm still trying to read into that setup.api.log file.

So, can I assume that the only way to fix this error is to download an iso of Windows Vista, unninstall my service packs, upgrade install Vista, run Vistalizator to change the language to Portuguese and then install Service Pack 1 & 2?
EDIT: Alright, so I formatted the thing since the driver bug wouldn't give me a break. The details on that can be found searching for the same thread title either on tomshardware or vistaforums if anyone happens to find this looking for the same error.
I have a real knack for bumping heads with errors that nobody else gets that somehow turn into unfixable bugs. At least if someone else searches for this problem they'll know what to do.

Cisco Wireless Control System need wireless Lan Controller ?

Cisco Wireless Control System need wireless Lan Controller , for Rogue detection

Hi Joao,
The WCS is used in conjuntion with the WLC (Wireless Lan Controller) for Rogue Detection. It is not a must for this function but more of an add-on :)
The Cisco WCS is an optional network component that works in conjunction with Cisco Aironet Lightweight Access Points, Cisco wireless LAN controllers and the Cisco Wireless Location Appliance.
From this doc;
http://www.cisco.com/en/US/products/ps6305/index.html
Overview of WCS
The Cisco Wireless Control System (WCS) is a Cisco Unified Wireless Network Solution management tool that adds to the capabilities of the web user interface and command line interface (CLI), moving from individual controllers to a network of controllers. WCS includes the same configuration, performance monitoring, security, fault management, and accounting options used at the controller level and adds a graphical view of multiple controllers and managed access points.
WCS runs on Windows 2003 and Red Hat Enterprise Linux ES 4.0 and AS 4.0 servers. On both Windows and Linux, WCS can run as a normal application or as a service, which runs continuously and resumes running after a reboot.
The WCS user interface enables operators to control all permitted Cisco Unified Wireless Network Solution configuration, monitoring, and control functions through Internet Explorer 6.0 or later. Operator permissions are defined by the administrator using the WCS user interface Administration menu, which enables the administrator to manage user accounts and schedule periodic maintenance tasks.
WCS simplifies controller configuration and monitoring while reducing data entry errors with the Cisco Unified Wireless Network Controller autodiscovery algorithm. WCS uses the industry-standard SNMP protocol to communicate with the controllers.
From this good doc;
http://www.cisco.com/en/US/products/ps6305/products_configuration_guide_chapter09186a00806b7270.html#wp1131195
Detect and Locate Rogue Access Points
From this WCS doc;
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_tech_note09186a00806f070a.shtml#new5
Rogue Detection under Unified Wireless Networks
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a0080722d8c.shtml
Hope this helps!
Rob

Wireless network controller drivers

Similar Messages

Maybe you are looking for