Wireless network failure

We are not able to connect  our Roku player to your wireless network. Do you have any suggestion? the roku support suggested to contact you.Thanks 

It would help if you posted the model of your wi-fi equipment.

Similar Messages

  • EOS WFT software causing wireless network failure.

    I have set up the Canon WFT pairing software and the EOS utilities on my windows 8 laptop computer.
    Normally when connecting my camera wirelessly to my computer I use a TP-Link portable hub to which nothing else is connected and there is no internet connected, this works fine as I can use it easily anywhere I go without having to set up the WFT settings on the camera again for different wireless hubs ip addresses etc.
    When I am not using the WFT software my computer will be connected to a different wireless hub for internet access and connection to other devices I live between two houses in different locations each has it's own virgin high speed wireless broadband  internet system.
    The WFT Pairing software starts automatically when I start my computer whether or not I intend to use it.
    Since installing the WFT pairing software I noticed my laptop had poor performance connecting to the internet via the wireless internet hubs with frequent disconnections and that other devices on the same wireless network also had problems and lost their connections. This also occurs when I visit friends when I use their networks.
    At first I did not connect this issue to the pairing software, however it became evident it was this laptop causing the problem because it occures in every location I connected to a wireless hub.
    I have now conclusively proved that after stopping the WFT pairing software in Windows Task Manager all devices connected to the wireless hub function normally again in all locations restart the pairing software and they will all fail again.
    Is this a known problem? and is there a solution for it?

    Hi RobertTheFat
    Yes thats clear, Since I found it was the cause of the problem I have it's automatic start up disabled and I check with task manager to make sure it is not running when not using the WFT, then when I need it I start it manually but it doesn't change the fact that it causes the network problem when it is needed and running.
    I have a suspicion that either Windows 8 or Norton 360 might be preventing it from detecting the camera and that it is constantly poling the network trying to find the camera, this could be the reason the network goes down.
    An interesting fact is that I do not have any problem accessing anything in the house such as the NAS drive or printer or other computers when it is running, but it pulls down the external connections so i cannot get reliable internet connections which makes it difficult to get any remote help.

  • Other wireless networks cause failure?

    Has anyone encountered an issue where another wireless network in the area has induced your Extreme to fail to obtain anything but a 169.x.x.x address?
    I was thinking there was something wrong with our Airport; I even took it to the Apple store where it immediately connected. We've not been using it at all for the past month or two. Last night, we had a power outage on our block except our house (different grid apparently) so on a whim I'd plugged the sucker in. Damned if it didn't connect right away and sing.
    Today, all lights and competing neighborhood networks are back on, and no connecting via Airport. The Airport is on, all lights operating and seemingly connected. However, I cannot get a valid IP.
    Anyone else had this problem? If so, what did you do about it? We are using WEP incryption and a closed network.
    Thanks and happy holidays!
    Alex
    MacIntel Mini, among others Mac OS X (10.4.8)
    MacIntel Mini Mac OS X (10.4.8)
      Mac OS X (10.4.8)  

    Sounds like that you may have some form of WiFi interference in the area.
    I suggest you perform a simple site survey, using utilities like AirPort Client Monitor (a part of AirPort Management Tools), MacStumbler, or iStumbler to determine potential areas of interference...and either, eliminate them or attempt to significantly reduce them.
    Some of the things you can do to improve your WiFi reception...
    - Try switching channels until you get the best performance of your Wi-Fi network. Most others will be using their router's default, which are channels 6 or 11. From your site survey, you should find the channels used by your neighbors, especially the ones with the strongest signal. Try to use a channel at least three channels away from them.
    - Turn on "Interference Robustness" on BOTH the AEBS AND your Macs.
    To enable Interference Robustness on the AirPort card:
    - From the AirPort icon on the menubar, click to select (enable) "Use Interference Robustness."

  • Apple TV 1st Gen can no longer connect to wireless networks

    My Apple TV (1st Gen) has recently lost the ability to connect to either of our wireless networks at home.  I rean the diagnostics at the reset screen and the Apple TV says it is performing normally.  In the settings, whenever I attempt to connect to a wireless network, I am now only offered "Other..." as a choice. Proceeding to the next screen, I enter the name of the network closest to the Apple TV -- an Airport Extreme set up for 5 GHz that this Apple TV connected with daily up until 2 days ago.  The Airport base station is perfoming normally, as my MacBook Pro can see it and establish a network connection without any difficulty.  The issue is limited to the Apple TV.  I did a Factory Restore, and now when I go to Wireless Network > "Other..." > Enter the name of the wireless network"  the resuit is always the same, and error message stating: "There was a problem connecting to the network. Check your settings and try again. (-4)".
    This message comes up almost immediately, without requesting a WiFi password -- suggesting to me that this Apple TV has lost the ability to connect to ANY wireless network due to a hardware failure.
    Q: Has anyone else in the Support Community had a similar experience with their 1st Gen Apple TV, and if so, did you find a solution to it?
    Note: When I first noticed the connction to this Apple TV had gone stale (greyed out in the iTunes Airplay Speakers list), and prior to doing the Factory Restore, I could play back iTunes content stored on the hard drive, but could not connect to the local wireless networks.  I noticed that the Apple TV was running very hot -- it has alwasy run pretty hot to the touch.
    If this Apple TV has died, I will get a 3rd Gen Apple TV, but wiill then have to work through the HDMI to Composite video + Audio issues, as this Apple TV is connected to our older (non-HDMI) TV.

    Follow-up:  Able to connect with ethernet cable, downloaded software updates, connected to iTunes, and synchec content.
    Next, disconnected the ethernet cable.  ATV1 froze and was restarted using the Menu + ( - ) combo on the remote.  Re-ran diagnostics yeilds: Apple TV is working fine.
    Restarted, then went to configure the Wirelss settings.   Apple TV once again does not show either of the two wireless networks.  Selecting "Other..." and entering the SSID yields the same immediate response:
    "There was a problem connecting to the network. Check your settings and try again. (-4)"
    No change on the wireless front :-(   Bummer.
    Looks like an ethernet connection is the only option left to continue using this Apple TV 1st Gen.
    Thanks for your help. -- Paul

  • How do i connect my MacBook Air to a Printer on my Wireless Network

    How do i connect my MacBook Air to a Printer on my Wireless Network ? The printer is connected to a PC running Windows 7. That PC is connected to my Wireless Network. MacBook connects fine to Network, but can't find Printer.

    Hi Kappy,
    Thanks for your response. I followed your instructions (for Mac OS 10.6.7). It seemed to set up OK, but when I tried to print I kept getting the following Failure Message "Session Setup failed : NT_Status_Invalid_Parameter".
    When I get the "Advanced Window" should I enter anything into the "Location" field ? Maybe I am not entering the correct Workgroup, Server or Sharename ? Is there a way to make sure all of that is correct ? I went on to the computer that the printer is connected to and verified all of that, but am not sure I looked in the right places.
    When I print via my Home Network from another Windows 7 Computer to the same PC, it works fine. I just can't get it to Print from my MacBook Air.
    I thought of using the IP Address. How do I find the IP address of the Computer that is connected to the Printer ? Is it what they call the IPv4 Address, or the IPv4 Default Gateway ?
    Appreciate any help you can provide.

  • On a wireless network test report, I get "The wireless radio is not functioning."

    The printer is a Photosmart C309a all-in-one.  I've used this printer for some time and did so wirelessly earlier today.  Upon ordering a print job the printer failed to produce results.  I ran a Network Configuration Page where it showed the printer to be offline with no Active Connection Type.  I then ran a Wireless Network Test report and received the message: "The wireless radio is not functioning.  Contact HP Support."  IS THERE A FIX FOR THIS?
    I reinstalled the printer software on my computer configuring it with a USB connection, in order to be able to use the printer.  I was able to use it with the USB connection but would most definitely prefer a wireless connection.  I also turned off the printer, router and computer and turned them on in the order outlined in the user's manual, but to no avail.  This, of course, I did before reinstalling the software for a USB connection.    

    Hi,
    I afraid the error indicate an an hardware failure..
    You may try using a wired ethernet cable as a workaround, the printer will need to be services in order to repair its wireless card.
    You may find the details to contact HP support by selecting your region and following Technical Support after you buy:
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • How do I set up time capsule to just backup multiple macs on a wireless network without using the TC in the bridge mode?

    I have an AT&T modem that serves as our home wireless network.  I wanted to backup up our computer data so I got a time capsule to back up our three household MACs.  After purchase, I found how that I needed to put the exising modem in "bridge mode" so the Time capsule would establish the network. Four frustrating hours later talking to 3 different people at Yahoo, I got the **** thing established.  It worked fine for 4 months - then a power failure forced me to repeat the process again.  I had to reestablish everything and it took another 4 hours.  After 6 months, another power failure forced me to go through the entire process again.  Now, of course, Yahoo is charging a fee to help you establish the TC as the network if you have one of their modems - and to make things interesting, they really don't understand MACs.  After 5 hours, in frustration, I gave up and asked the Yahoo folks to just put their modem back in as the network hub and I unplugged the Time Capsule.  Now after 3 months of looking at an expensive Time Capsule and searching the internet for help, I figured I try the Apple help network,
    I just want to backup the data on my MACS.  I have a network in the house that works just fine.  How do I configure the TC to work as a backup on a wireless network?  It seems like it should be simple, but it isn't.  Can anybody help?

    I have no idea about the modem and bridge mode (I don't do networking -- hopefully Bob Timmons, Tesserax, or one of the other networking gurus will drop in and address that).
    But . . . you should be able to back up to the TC as long as it's on your network and recognized by your Macs.  I think being in bridge mode means it will be rather slow, but it should work.  Until/unless we hear otherwise, you might want to see #Q1 in Using Time Machine with a Time Capsule.

  • [Solved]Unable to connect to wireless network using networkmanager

    I have just recently reinstalled Arch Linux so I could try out Gnome 3. I am using Slim for a display manager and as I said before Gnome 3 for the window manager. All of the packages are the latest versions.
    slim 1.3.4-2
    gnome-session 3.4.2-3
    consolekit 0.4.6-4
    networkmanager 0.9.4.0-6
    network-manager-applet 0.9.4.1-1
    My current issue is that when i click on the network manager applet then click on a network to connect to it nothing happens. It doesn't matter if the network is secure or not. I have followed the instructions on the wiki for slim, gnome, and networkmanager. I have been reading the forums and trying out other people's solutions. So far nothing is working.
    Sorry for the long post but I figured more information was better than not enough.
    Thanks in advance. 
    Here are some of my config files.
    /etc/rc.conf
    # /etc/rc.conf - configuration file for initscripts
    # Most of rc.conf has been replaced by various other configuration
    # files. See archlinux(7) for details.
    # For more details on rc.conf see rc.conf(5).
    DAEMONS=(syslog-ng dbus networkmanager alsa hwclock sshd crond)
    # Storage
    # USEDMRAID="no"
    # USELVM="no"
    # Network
    # interface=
    # address=
    # netmask=
    # gateway=
    /etc/slim.conf
    # Path, X server and arguments (if needed)
    # Note: -xauth $authfile is automatically appended
    default_path /bin:/usr/bin:/usr/local/bin
    default_xserver /usr/bin/X
    xserver_arguments -nolisten tcp vt07
    # Commands for halt, login, etc.
    halt_cmd /sbin/shutdown -h now
    reboot_cmd /sbin/shutdown -r now
    console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
    #suspend_cmd /usr/sbin/suspend
    # Full path to the xauth binary
    xauth_path /usr/bin/xauth
    # Xauth file for server
    authfile /var/run/slim.auth
    # Activate numlock when slim starts. Valid values: on|off
    # numlock on
    # Hide the mouse cursor (note: does not work with some WMs).
    # Valid values: true|false
    # hidecursor false
    # This command is executed after a succesful login.
    # you can place the %session and %theme variables
    # to handle launching of specific commands in .xinitrc
    # depending of chosen session and slim theme
    # NOTE: if your system does not have bash you need
    # to adjust the command according to your preferred shell,
    # i.e. for freebsd use:
    # login_cmd exec /bin/sh - ~/.xinitrc %session
    #login_cmd exec /bin/bash -login ~/.xinitrc %session
    login_cmd exec ck-launch-session dbus-launch /bin/bash -login ~/.xinitrc %session > ~/.xsession-errors 2>&1
    # Commands executed when starting and exiting a session.
    # They can be used for registering a X11 session with
    # sessreg. You can use the %user variable
    # sessionstart_cmd some command
    # sessionstop_cmd some command
    # Start in daemon mode. Valid values: yes | no
    # Note that this can be overriden by the command line
    # options "-d" and "-nodaemon"
    # daemon yes
    # Available sessions (first one is the default).
    # The current chosen session name is replaced in the login_cmd
    # above, so your login command can handle different sessions.
    # see the xinitrc.sample file shipped with slim sources
    sessions gnome-session
    # Executed when pressing F11 (requires imagemagick)
    screenshot_cmd import -window root /slim.png
    # welcome message. Available variables: %host, %domain
    welcome_msg Welcome to %host
    # Session message. Prepended to the session name when pressing F1
    # session_msg Session:
    # shutdown / reboot messages
    shutdown_msg The system is halting...
    reboot_msg The system is rebooting...
    # default user, leave blank or remove this line
    # for avoid pre-loading the username.
    #default_user simone
    # Focus the password field on start when default_user is set
    # Set to "yes" to enable this feature
    #focus_password no
    # Automatically login the default user (without entering
    # the password. Set to "yes" to enable this feature
    #auto_login no
    # current theme, use comma separated list to specify a set to
    # randomly choose from
    #current_theme default
    current_theme archlinux-simplyblack
    # Lock file
    lockfile /var/lock/slim.lock
    # Log file
    logfile /var/log/slim.log
    /home/felix85/.xinitrc
    #!/bin/sh
    #/usr/bin/gnome-keyring-daemon --start --components=gpg
    #/usr/bin/gnome-keyring-daemon --start --components=pkcs11
    #/usr/bin/gnome-keyring-daemon --start --components=secrets
    #/usr/bin/gnome-keyring-daemon --start --components=ssh
    exec gnome-session
    /etc/polkit-1/localauthority/50-local.d/org.freedesktop.NetworkManager.pkla
    [nm-applet]
    Identity=unix-group:network;unix-group:wheel
    Action=org.freedesktop.NetworkManager.*
    ResultAny=yes
    ResultInactive=no
    ResultActive=yes
    /etc/pam.d/login
    #%PAM-1.0
    auth required pam_securetty.so
    auth requisite pam_nologin.so
    auth include system-local-login
    account include system-local-login
    session include system-local-login
    session optional pam_ck_connector.so
    /etc/pam.d/passwd
    #%PAM-1.0
    #password required pam_cracklib.so difok=2 minlen=8 dcredit=2 ocredit=2 retry=3
    #password required pam_unix.so sha512 shadow use_authtok
    password required pam_unix.so sha512 shadow nullok
    password optional pam_gnome_keyring.so
    /etc/pam.d/slim
    #%PAM-1.0
    auth requisite pam_nologin.so
    auth required pam_env.so
    auth required pam_unix.so
    auth optional pam_gnome_keyring.so
    account required pam_unix.so
    password required pam_unix.so
    session required pam_limits.so
    session required pam_unix.so
    session optional pam_loginuid.so
    session optional pam_gnome_keyring.so auto_start
    -session optional pam_systemd.so
    /etc/group
    root:x:0:root
    bin:x:1:root,bin,daemon
    daemon:x:2:root,bin,daemon
    sys:x:3:root,bin
    adm:x:4:root,daemon
    tty:x:5:
    disk:x:6:root
    lp:x:7:daemon
    mem:x:8:
    kmem:x:9:
    wheel:x:10:root,felix85
    ftp:x:11:
    mail:x:12:
    uucp:x:14:
    log:x:19:root
    utmp:x:20:
    locate:x:21:
    rfkill:x:24:
    smmsp:x:25:
    http:x:33:
    games:x:50:felix85
    lock:x:54:
    network:x:90:felix85
    video:x:91:felix85
    audio:x:92:felix85
    optical:x:93:felix85
    floppy:x:94:
    storage:x:95:felix85
    scanner:x:96:
    power:x:98:felix85
    nobody:x:99:
    users:x:100:felix85
    dbus:x:81:felix85
    felix85:x:1000:
    avahi:x:84:
    usbmux:x:140:
    rtkit:x:133:
    ntp:x:87:
    networkmanager:x:1001:felix85
    Here are some of the log files.
    /home/felix85/.xsession-errors
    GNOME_KEYRING_CONTROL=/home/felix85/.cache/keyring-YtWJUI
    GPG_AGENT_INFO=/home/felix85/.cache/keyring-YtWJUI/gpg:0:1
    GNOME_KEYRING_CONTROL=/home/felix85/.cache/keyring-YtWJUI
    GPG_AGENT_INFO=/home/felix85/.cache/keyring-YtWJUI/gpg:0:1
    GNOME_KEYRING_CONTROL=/home/felix85/.cache/keyring-YtWJUI
    GPG_AGENT_INFO=/home/felix85/.cache/keyring-YtWJUI/gpg:0:1
    GNOME_KEYRING_CONTROL=/home/felix85/.cache/keyring-YtWJUI
    GPG_AGENT_INFO=/home/felix85/.cache/keyring-YtWJUI/gpg:0:1
    SSH_AUTH_SOCK=/home/felix85/.cache/keyring-YtWJUI/ssh
    (gnome-settings-daemon:993): color-plugin-WARNING **: failed to create device: GDBus.Error:org.freedesktop.ColorManager.Failed: failed to obtain org.freedesktop.color-manager.create-device auth
    Failed to play sound: File or data not found
    ** Message: applet now removed from the notification area
    ** Message: applet now embedded in the notification area
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    (gnome-shell:1019): folks-WARNING **: Failed to find primary PersonaStore with type ID 'eds' and ID 'system'.
    Individuals will not be linked properly and creating new links between Personas will not work.
    The configured primary PersonaStore's backend may not be installed. If you are unsure, check with your distribution.
    Window manager warning: Log level 16: Device activation failed: (32) Not authorized to control networking.
    Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
    Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
    Window manager warning: Log level 16: Could not create object for /org/freedesktop/NetworkManager/IP6Config/6: Method "GetAll" with signature "s" on interface "org.freedesktop.DBus.Properties" doesn't exist
    /var/log/auth.log
    Jul 27 20:10:33 f3lix85-arch login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
    Jul 27 20:10:33 f3lix85-arch login: ROOT LOGIN ON tty1
    Jul 27 20:17:17 f3lix85-arch login: pam_unix(login:session): session closed for user root
    Jul 27 20:23:28 f3lix85-arch login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
    Jul 27 20:23:28 f3lix85-arch login: ROOT LOGIN ON tty1
    Jul 27 20:25:06 f3lix85-arch sshd[641]: Server listening on 0.0.0.0 port 22.
    Jul 27 20:25:06 f3lix85-arch sshd[641]: Server listening on :: port 22.
    Jul 27 20:25:30 f3lix85-arch sshd[642]: Accepted password for root from 192.168.0.2 port 60233 ssh2
    Jul 27 20:25:30 f3lix85-arch sshd[642]: pam_unix_session(sshd:session): session opened for user root by (uid=0)
    Jul 27 20:29:22 f3lix85-arch login: pam_unix(login:session): session closed for user root
    Jul 27 20:29:24 f3lix85-arch sshd[641]: Received signal 15; terminating.
    Jul 27 20:29:24 f3lix85-arch sshd[642]: Exiting on signal 15
    Jul 27 20:29:24 f3lix85-arch sshd[642]: pam_unix_session(sshd:session): session closed for user root
    Jul 27 20:30:14 f3lix85-arch login: pam_tally(login:auth): pam_get_uid; no such user
    Jul 27 20:30:16 f3lix85-arch login: pam_unix(login:auth): check pass; user unknown
    Jul 27 20:30:16 f3lix85-arch login: pam_unix(login:auth): authentication failure; logname=LOGIN uid=0 euid=0 tty=tty1 ruser= rhost=
    Jul 27 20:30:18 f3lix85-arch login: FAILED LOGIN 1 FROM tty1 FOR felix85, Authentication failure
    Jul 27 20:30:22 f3lix85-arch login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
    Jul 27 20:30:22 f3lix85-arch login: ROOT LOGIN ON tty1
    Jul 27 20:31:34 f3lix85-arch login: pam_unix(login:session): session closed for user root
    Jul 27 20:32:10 f3lix85-arch sshd[415]: Server listening on 0.0.0.0 port 22.
    Jul 27 20:32:10 f3lix85-arch sshd[415]: Server listening on :: port 22.
    Jul 27 20:34:33 f3lix85-arch sshd[553]: Accepted password for root from 192.168.0.2 port 60466 ssh2
    Jul 27 20:34:33 f3lix85-arch sshd[553]: pam_unix_session(sshd:session): session opened for user root by (uid=0)
    Jul 27 20:36:22 f3lix85-arch sshd[415]: Received signal 15; terminating.
    Jul 27 20:36:22 f3lix85-arch sshd[553]: Exiting on signal 15
    Jul 27 20:36:22 f3lix85-arch sshd[553]: pam_unix_session(sshd:session): session closed for user root
    Jul 27 20:36:59 f3lix85-arch sshd[417]: Server listening on 0.0.0.0 port 22.
    Jul 27 20:36:59 f3lix85-arch sshd[417]: Server listening on :: port 22.
    Jul 27 20:37:06 f3lix85-arch login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
    Jul 27 20:37:06 f3lix85-arch login: ROOT LOGIN ON tty1
    Jul 27 20:37:08 f3lix85-arch login: pam_unix(login:session): session closed for user root
    Jul 27 20:37:09 f3lix85-arch sshd[417]: Received signal 15; terminating.
    Jul 27 20:37:47 f3lix85-arch sshd[425]: Server listening on 0.0.0.0 port 22.
    Jul 27 20:37:47 f3lix85-arch sshd[425]: Server listening on :: port 22.
    Jul 27 20:37:55 f3lix85-arch login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
    Jul 27 20:37:55 f3lix85-arch login: ROOT LOGIN ON tty1
    Jul 27 20:39:02 f3lix85-arch login: pam_unix(login:session): session closed for user root
    Jul 27 20:39:03 f3lix85-arch sshd[425]: Received signal 15; terminating.
    Jul 27 20:39:41 f3lix85-arch sshd[424]: Server listening on 0.0.0.0 port 22.
    Jul 27 20:39:41 f3lix85-arch sshd[424]: Server listening on :: port 22.
    Jul 27 20:39:50 f3lix85-arch login: pam_unix(login:session): session opened for user root by LOGIN(uid=0)
    Jul 27 20:39:50 f3lix85-arch login: ROOT LOGIN ON tty1
    Jul 27 20:45:00 f3lix85-arch useradd[708]: new group: name=felix85, GID=1000
    Jul 27 20:45:00 f3lix85-arch useradd[708]: new user: name=felix85, UID=1000, GID=1000, home=/home/felix85, shell=/bin/bash
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'wheel'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'games'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'network'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'video'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'audio'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'optical'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'storage'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'power'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to group 'users'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'wheel'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'games'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'network'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'video'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'audio'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'optical'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'storage'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'power'
    Jul 27 20:45:01 f3lix85-arch useradd[708]: add 'felix85' to shadow group 'users'
    Jul 27 20:45:15 f3lix85-arch passwd[713]: pam_unix(passwd:chauthtok): password changed for felix85
    Jul 27 20:45:17 f3lix85-arch login: pam_unix(login:session): session closed for user root
    Jul 27 20:45:24 f3lix85-arch login: pam_unix(login:session): session opened for user felix85 by LOGIN(uid=0)
    Jul 27 20:45:24 f3lix85-arch login: LOGIN ON tty1 BY felix85
    Jul 27 21:01:01 f3lix85-arch /usr/sbin/crond[1360]: pam_unix(crond:session): session opened for user root by (uid=0)
    Jul 27 21:01:02 f3lix85-arch /USR/SBIN/CROND[1360]: pam_unix(crond:session): session closed for user root
    Jul 27 22:01:01 f3lix85-arch /usr/sbin/crond[2993]: pam_unix(crond:session): session opened for user root by (uid=0)
    Jul 27 22:01:01 f3lix85-arch /USR/SBIN/CROND[2993]: pam_unix(crond:session): session closed for user root
    Jul 27 23:01:01 f3lix85-arch /usr/sbin/crond[5585]: pam_unix(crond:session): session opened for user root by (uid=0)
    Jul 27 23:01:01 f3lix85-arch /USR/SBIN/CROND[5585]: pam_unix(crond:session): session closed for user root
    Jul 28 00:01:01 f3lix85-arch /usr/sbin/crond[8044]: pam_unix(crond:session): session opened for user root by (uid=0)
    Jul 28 00:01:01 f3lix85-arch /USR/SBIN/CROND[8044]: pam_unix(crond:session): session closed for user root
    Jul 28 01:01:01 f3lix85-arch /usr/sbin/crond[10554]: pam_unix(crond:session): session opened for user root by (uid=0)
    Jul 28 01:01:01 f3lix85-arch /USR/SBIN/CROND[10554]: pam_unix(crond:session): session closed for user root
    Jul 28 01:54:45 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Sy
    Jul 28 01:54:45 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 01:55:47 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 01:55:56 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Su
    Jul 28 01:55:56 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 01:55:56 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 01:56:10 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S xorg-server
    Jul 28 01:56:10 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 01:58:07 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 01:59:25 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S xf86-video-intel
    Jul 28 01:59:25 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:00:10 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:01:01 f3lix85-arch /usr/sbin/crond[13451]: pam_unix(crond:session): session opened for user root by (uid=0)
    Jul 28 02:01:01 f3lix85-arch /USR/SBIN/CROND[13451]: pam_unix(crond:session): session closed for user root
    Jul 28 02:04:11 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S dbus
    Jul 28 02:04:11 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:04:13 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:04:30 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/sbin/rc.d start dbus
    Jul 28 02:04:30 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:04:30 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:05:10 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.conf
    Jul 28 02:05:10 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:05:19 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:05:37 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S gnome
    Jul 28 02:05:37 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:17:31 f3lix85-arch groupadd[15603]: group added to /etc/group: name=avahi, GID=84
    Jul 28 02:17:31 f3lix85-arch groupadd[15603]: group added to /etc/gshadow: name=avahi
    Jul 28 02:17:31 f3lix85-arch groupadd[15603]: new group: name=avahi, GID=84
    Jul 28 02:17:31 f3lix85-arch useradd[15608]: new user: name=avahi, UID=84, GID=84, home=/, shell=/bin/false
    Jul 28 02:18:20 f3lix85-arch groupadd[15729]: group added to /etc/group: name=usbmux, GID=140
    Jul 28 02:18:20 f3lix85-arch groupadd[15729]: group added to /etc/gshadow: name=usbmux
    Jul 28 02:18:20 f3lix85-arch groupadd[15729]: new group: name=usbmux, GID=140
    Jul 28 02:18:20 f3lix85-arch useradd[15733]: new user: name=usbmux, UID=140, GID=140, home=/, shell=/sbin/nologin
    Jul 28 02:18:21 f3lix85-arch passwd[15738]: password for 'usbmux' changed by 'root'
    Jul 28 02:18:23 f3lix85-arch groupadd[15752]: group added to /etc/group: name=rtkit, GID=133
    Jul 28 02:18:23 f3lix85-arch groupadd[15752]: group added to /etc/gshadow: name=rtkit
    Jul 28 02:18:23 f3lix85-arch groupadd[15752]: new group: name=rtkit, GID=133
    Jul 28 02:18:23 f3lix85-arch useradd[15757]: new user: name=rtkit, UID=133, GID=133, home=/proc, shell=/sbin/nologin
    Jul 28 02:19:05 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:19:20 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss libsoup
    Jul 28 02:19:20 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:19:20 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:20:00 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S opengl-man-pages
    Jul 28 02:20:00 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:20:11 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:22:02 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S slim archlinux-themes-slim
    Jul 28 02:22:02 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:22:17 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:23:27 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/inittab
    Jul 28 02:23:27 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:23:44 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:30:31 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/slim.conf
    Jul 28 02:30:31 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:31:50 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:32:03 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/pam.d/slim
    Jul 28 02:32:03 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:33:18 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:33:30 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/pam.d/passwd
    Jul 28 02:33:30 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:34:01 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:34:06 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/pam.d/slim
    Jul 28 02:34:06 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:34:18 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:35:22 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss ck-launch
    Jul 28 02:35:22 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:35:22 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:36:07 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss consolkit
    Jul 28 02:36:07 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:36:07 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:36:19 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss consolekit
    Jul 28 02:36:19 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:36:19 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:36:32 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/slim.conf
    Jul 28 02:36:32 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:39:28 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:45:30 f3lix85-arch sudo: felix85 : TTY=tty1 ; PWD=/home/felix85 ; USER=root ; COMMAND=/sbin/reboot
    Jul 28 02:45:30 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:45:31 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:45:31 f3lix85-arch login: pam_unix(login:session): session closed for user felix85
    Jul 28 02:45:33 f3lix85-arch sshd[424]: Received signal 15; terminating.
    Jul 28 02:46:09 f3lix85-arch sshd[446]: Server listening on 0.0.0.0 port 22.
    Jul 28 02:46:09 f3lix85-arch sshd[446]: Server listening on :: port 22.
    Jul 28 02:46:25 f3lix85-arch slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
    Jul 28 02:46:25 f3lix85-arch gnome-keyring-daemon[500]: couldn't create socket directory: No such file or directory
    Jul 28 02:46:25 f3lix85-arch gnome-keyring-daemon[500]: couldn't bind to control socket: /home/felix85/.cache/keyring-RPlUb3/control: No such file or directory
    Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[593]: couldn't create socket directory: No such file or directory
    Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[593]: couldn't bind to control socket: /home/felix85/.cache/keyring-PjzFka/control: No such file or directory
    Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[594]: couldn't create socket directory: No such file or directory
    Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[594]: couldn't bind to control socket: /home/felix85/.cache/keyring-Ulkau9/control: No such file or directory
    Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[595]: couldn't create socket directory: No such file or directory
    Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[595]: couldn't bind to control socket: /home/felix85/.cache/keyring-NtKWN9/control: No such file or directory
    Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[596]: couldn't create socket directory: No such file or directory
    Jul 28 02:46:26 f3lix85-arch gnome-keyring-daemon[596]: couldn't bind to control socket: /home/felix85/.cache/keyring-2wh0Cd/control: No such file or directory
    Jul 28 02:46:43 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 02:46:44 f3lix85-arch polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
    Jul 28 02:46:44 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 02:46:44 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 02:46:44 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 02:46:44 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 02:46:45 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 02:46:45 f3lix85-arch dbus[410]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=502 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 02:52:29 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -S ntp
    Jul 28 02:52:29 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:52:39 f3lix85-arch groupadd[1082]: group added to /etc/group: name=ntp, GID=87
    Jul 28 02:52:39 f3lix85-arch groupadd[1082]: group added to /etc/gshadow: name=ntp
    Jul 28 02:52:39 f3lix85-arch groupadd[1082]: new group: name=ntp, GID=87
    Jul 28 02:52:39 f3lix85-arch useradd[1087]: new user: name=ntp, UID=87, GID=87, home=/var/lib/ntp, shell=/bin/false
    Jul 28 02:52:40 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:52:55 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/ntp.conf
    Jul 28 02:52:55 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:54:15 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:54:25 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.local
    Jul 28 02:54:25 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:55:07 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:55:19 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.conf
    Jul 28 02:55:19 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 02:55:42 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 02:55:55 f3lix85-arch slim: pam_unix(slim:session): session closed for user felix85
    Jul 28 02:55:55 f3lix85-arch polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
    Jul 28 02:56:21 f3lix85-arch slim: pam_unix(slim:auth): check pass; user unknown
    Jul 28 02:56:21 f3lix85-arch slim: pam_unix(slim:auth): authentication failure; logname= uid=0 euid=0 tty=:0.0 ruser=root rhost=
    Jul 28 02:56:21 f3lix85-arch slim: gkr-pam: error looking up user information
    Jul 28 02:56:53 f3lix85-arch sshd[446]: Received signal 15; terminating.
    Jul 28 02:57:32 f3lix85-arch sshd[474]: Server listening on 0.0.0.0 port 22.
    Jul 28 02:57:32 f3lix85-arch sshd[474]: Server listening on :: port 22.
    Jul 28 10:59:35 f3lix85-arch slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
    Jul 28 10:59:37 f3lix85-arch gnome-keyring-daemon[544]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 10:59:37 f3lix85-arch gnome-keyring-daemon[544]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 10:59:37 f3lix85-arch gnome-keyring-daemon[544]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 10:59:38 f3lix85-arch gnome-keyring-daemon[544]: The GPG agent was already initialized
    Jul 28 10:59:38 f3lix85-arch gnome-keyring-daemon[544]: The Secret Service was already initialized
    Jul 28 10:59:38 f3lix85-arch gnome-keyring-daemon[544]: The PKCS#11 component was already initialized
    Jul 28 10:59:38 f3lix85-arch gnome-keyring-daemon[544]: The SSH agent was already initialized
    Jul 28 10:59:53 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 10:59:53 f3lix85-arch polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
    Jul 28 10:59:54 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 10:59:54 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 10:59:54 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 10:59:54 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 10:59:54 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 10:59:54 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=753 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:00:27 f3lix85-arch slim: pam_unix(slim:session): session closed for user felix85
    Jul 28 11:00:27 f3lix85-arch polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
    Jul 28 11:00:35 f3lix85-arch slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
    Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: The GPG agent was already initialized
    Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: The Secret Service was already initialized
    Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: The PKCS#11 component was already initialized
    Jul 28 11:00:35 f3lix85-arch gnome-keyring-daemon[905]: The SSH agent was already initialized
    Jul 28 11:00:39 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:00:39 f3lix85-arch polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session4 (system bus name :1.41 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
    Jul 28 11:00:40 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:00:40 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:00:40 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:00:40 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:00:40 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:00:40 f3lix85-arch dbus[438]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.41" (uid=1000 pid=964 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=547 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:01:01 f3lix85-arch /usr/sbin/crond[1024]: pam_unix(crond:session): session opened for user root by (uid=0)
    Jul 28 11:01:01 f3lix85-arch /USR/SBIN/CROND[1024]: pam_unix(crond:session): session closed for user root
    Jul 28 11:03:16 f3lix85-arch slim: pam_unix(slim:session): session closed for user felix85
    Jul 28 11:03:16 f3lix85-arch polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session4 (system bus name :1.41, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
    Jul 28 11:03:32 f3lix85-arch sshd[474]: Received signal 15; terminating.
    Jul 28 03:02:17 f3lix85-arch sshd[471]: Server listening on 0.0.0.0 port 22.
    Jul 28 03:02:17 f3lix85-arch sshd[471]: Server listening on :: port 22.
    Jul 28 11:04:23 f3lix85-arch slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
    Jul 28 11:04:25 f3lix85-arch gnome-keyring-daemon[528]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 11:04:25 f3lix85-arch gnome-keyring-daemon[528]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 11:04:25 f3lix85-arch gnome-keyring-daemon[528]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 11:04:26 f3lix85-arch gnome-keyring-daemon[528]: The GPG agent was already initialized
    Jul 28 11:04:26 f3lix85-arch gnome-keyring-daemon[528]: The Secret Service was already initialized
    Jul 28 11:04:26 f3lix85-arch gnome-keyring-daemon[528]: The PKCS#11 component was already initialized
    Jul 28 11:04:26 f3lix85-arch gnome-keyring-daemon[528]: The SSH agent was already initialized
    Jul 28 11:04:40 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:04:41 f3lix85-arch polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
    Jul 28 11:04:42 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:04:42 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:04:42 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:04:42 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:04:42 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:04:42 f3lix85-arch dbus[435]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.23" (uid=1000 pid=752 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.1" (uid=0 pid=531 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:13:08 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss networkmanager
    Jul 28 11:13:08 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 11:13:08 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 11:13:42 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/sbin/rc.d start networkmanager
    Jul 28 11:13:42 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 11:13:43 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 11:14:23 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.conf
    Jul 28 11:14:23 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 11:15:33 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 11:16:27 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/sbin/groupadd networkmanager
    Jul 28 11:16:27 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 11:16:27 f3lix85-arch groupadd[1506]: group added to /etc/group: name=networkmanager, GID=1001
    Jul 28 11:16:27 f3lix85-arch groupadd[1506]: group added to /etc/gshadow: name=networkmanager
    Jul 28 11:16:27 f3lix85-arch groupadd[1506]: new group: name=networkmanager, GID=1001
    Jul 28 11:16:27 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 11:16:54 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/gpasswd -a felix85 networkmanager
    Jul 28 11:16:54 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 11:16:54 f3lix85-arch gpasswd[1524]: user felix85 added by root to group networkmanager
    Jul 28 11:16:54 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 11:17:35 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/hosts
    Jul 28 11:17:35 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 11:18:02 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 11:18:07 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/hostname
    Jul 28 11:18:07 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 11:18:09 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 11:18:29 f3lix85-arch sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.conf
    Jul 28 11:18:29 f3lix85-arch sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 11:18:40 f3lix85-arch sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 11:18:54 f3lix85-arch slim: pam_unix(slim:session): session closed for user felix85
    Jul 28 11:18:54 f3lix85-arch polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.23, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
    Jul 28 11:19:07 f3lix85-arch sshd[471]: Received signal 15; terminating.
    Jul 28 03:17:51 localhost sshd[442]: Server listening on 0.0.0.0 port 22.
    Jul 28 03:17:51 localhost sshd[442]: Server listening on :: port 22.
    Jul 28 03:18:04 localhost slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
    Jul 28 03:18:06 localhost gnome-keyring-daemon[500]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 03:18:06 localhost gnome-keyring-daemon[500]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 03:18:06 localhost gnome-keyring-daemon[500]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 03:18:07 localhost gnome-keyring-daemon[500]: The Secret Service was already initialized
    Jul 28 03:18:07 localhost gnome-keyring-daemon[500]: The GPG agent was already initialized
    Jul 28 03:18:07 localhost gnome-keyring-daemon[500]: The PKCS#11 component was already initialized
    Jul 28 03:18:07 localhost gnome-keyring-daemon[500]: The SSH agent was already initialized
    Jul 28 11:20:14 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:20:14 localhost polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.30 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
    Jul 28 11:20:16 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:20:16 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:20:16 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:20:16 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:20:16 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:20:16 localhost dbus[332]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.30" (uid=1000 pid=705 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.9" (uid=0 pid=503 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 11:24:28 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/polkit-1/localauthority/50-local.d/org.freedesktop.NetworkManager.pkla
    Jul 28 11:24:28 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 11:24:34 localhost sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 11:24:36 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/polkit-1/localauthority/50-local.d/org.freedesktop.NetworkManager.pkla
    Jul 28 11:24:36 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 11:25:58 localhost sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 11:26:11 localhost slim: pam_unix(slim:session): session closed for user felix85
    Jul 28 11:26:11 localhost polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.30, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
    Jul 28 11:26:23 localhost sshd[442]: Received signal 15; terminating.
    Jul 28 03:25:04 localhost sshd[444]: Server listening on 0.0.0.0 port 22.
    Jul 28 03:25:04 localhost sshd[444]: Server listening on :: port 22.
    Jul 28 03:25:16 localhost slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
    Jul 28 03:25:17 localhost gnome-keyring-daemon[501]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 03:25:17 localhost gnome-keyring-daemon[501]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 03:25:17 localhost gnome-keyring-daemon[501]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 03:25:18 localhost gnome-keyring-daemon[501]: The GPG agent was already initialized
    Jul 28 03:25:18 localhost gnome-keyring-daemon[501]: The Secret Service was already initialized
    Jul 28 03:25:18 localhost gnome-keyring-daemon[501]: The PKCS#11 component was already initialized
    Jul 28 03:25:18 localhost gnome-keyring-daemon[501]: The SSH agent was already initialized
    Jul 28 03:25:33 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:25:34 localhost polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.27 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
    Jul 28 03:25:35 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:25:35 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:25:35 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:25:35 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:25:35 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:25:35 localhost dbus[338]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=708 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=504 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:28:06 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/sbin/ip address
    Jul 28 03:28:06 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 03:28:06 localhost sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 03:36:38 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss polkit
    Jul 28 03:36:38 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 03:36:39 localhost sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 03:43:36 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/pam.d/login
    Jul 28 03:43:36 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 03:44:38 localhost sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 03:44:48 localhost slim: pam_unix(slim:session): session closed for user felix85
    Jul 28 03:44:48 localhost polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.27, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
    Jul 28 03:45:01 localhost sshd[444]: Received signal 15; terminating.
    Jul 28 03:45:36 localhost sshd[464]: Server listening on 0.0.0.0 port 22.
    Jul 28 03:45:36 localhost sshd[464]: Server listening on :: port 22.
    Jul 28 03:45:47 localhost slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
    Jul 28 03:45:48 localhost gnome-keyring-daemon[517]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 03:45:48 localhost gnome-keyring-daemon[517]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 03:45:48 localhost gnome-keyring-daemon[517]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 03:45:49 localhost gnome-keyring-daemon[517]: The GPG agent was already initialized
    Jul 28 03:45:49 localhost gnome-keyring-daemon[517]: The Secret Service was already initialized
    Jul 28 03:45:49 localhost gnome-keyring-daemon[517]: The PKCS#11 component was already initialized
    Jul 28 03:45:49 localhost gnome-keyring-daemon[517]: The SSH agent was already initialized
    Jul 28 03:46:05 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:46:05 localhost polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.27 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
    Jul 28 03:46:06 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:46:06 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:46:06 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:46:06 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:46:06 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:46:06 localhost dbus[357]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=723 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=520 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:47:27 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/pacman -Ss hal
    Jul 28 03:47:27 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 03:47:28 localhost sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 03:47:52 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.conf
    Jul 28 03:47:52 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 03:48:29 localhost sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 03:51:08 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/rc.conf
    Jul 28 03:51:08 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 03:51:17 localhost sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 03:51:35 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/nano /etc/polkit-1/localauthority.conf.d/50-localauthority.conf
    Jul 28 03:51:35 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 03:51:45 localhost sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 03:55:12 localhost gpasswd[843]: felix85 failed to add user felix85 to group dbus: Permission denied
    Jul 28 03:55:18 localhost sudo: felix85 : TTY=pts/0 ; PWD=/home/felix85 ; USER=root ; COMMAND=/usr/bin/gpasswd -a felix85 dbus
    Jul 28 03:55:18 localhost sudo: pam_unix(sudo:session): session opened for user root by felix85(uid=0)
    Jul 28 03:55:18 localhost gpasswd[845]: user felix85 added by root to group dbus
    Jul 28 03:55:18 localhost sudo: pam_unix(sudo:session): session closed for user root
    Jul 28 03:55:29 localhost slim: pam_unix(slim:session): session closed for user felix85
    Jul 28 03:55:29 localhost polkitd(authority=local): Unregistered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.27, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
    Jul 28 03:55:41 localhost sshd[464]: Received signal 15; terminating.
    Jul 28 03:56:15 localhost sshd[430]: Server listening on 0.0.0.0 port 22.
    Jul 28 03:56:15 localhost sshd[430]: Server listening on :: port 22.
    Jul 28 03:56:25 localhost slim: pam_unix(slim:session): session opened for user felix85 by (uid=0)
    Jul 28 03:56:26 localhost gnome-keyring-daemon[484]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 03:56:26 localhost gnome-keyring-daemon[484]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 03:56:26 localhost gnome-keyring-daemon[484]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
    Jul 28 03:56:28 localhost gnome-keyring-daemon[484]: The GPG agent was already initialized
    Jul 28 03:56:28 localhost gnome-keyring-daemon[484]: The Secret Service was already initialized
    Jul 28 03:56:28 localhost gnome-keyring-daemon[484]: The PKCS#11 component was already initialized
    Jul 28 03:56:28 localhost gnome-keyring-daemon[484]: The SSH agent was already initialized
    Jul 28 03:56:43 localhost dbus[323]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=690 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=487 comm="/usr/sbin/console-kit-daemon --no-daemon ")
    Jul 28 03:56:44 localhost polkitd(authority=local): Registered Authentication Agent for unix-session:/org/freedesktop/ConsoleKit/Session2 (system bus name :1.27 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
    Jul 28 03:56:45 localhost dbus[323]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.27" (uid=1000 pid=690 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=487 comm="/usr/sbin/console-kit-daemon --no-da

    I am posting this while being manually connected to my wireless router.
    Here are the results of manually connecting to my wireless network.
    First I replaced networkmanager with network in /etc/rc.conf under DAEMONS and rebooted.
    Next I ran "ip link set wlan0 up"
    iwlist wlan0 scan
    wlan0 Scan completed :
    Cell 01 - Address: 00:12:17:0C:11:FF
    Channel:10
    Frequency:2.457 GHz (Channel 10)
    Quality=62/70 Signal level=-48 dBm
    Encryption key:on
    ESSID:"Sherwood"
    Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
    24 Mb/s; 36 Mb/s; 54 Mb/s
    Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
    Mode:Master
    Extra:tsf=00000050a6d70bc4
    Extra: Last beacon: 9910ms ago
    IE: Unknown: 000853686572776F6F64
    IE: Unknown: 010882848B962430486C
    IE: Unknown: 03010A
    IE: Unknown: 2A0100
    IE: Unknown: 2F0100
    IE: Unknown: 32040C121860
    IE: Unknown: DD06001018020000
    IE: WPA Version 1
    Group Cipher : TKIP
    Pairwise Ciphers (1) : TKIP
    Authentication Suites (1) : PSK
    ip addr
    2: wlan0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
    link/ether 00:19:d2:c5:16:bb brd ff:ff:ff:ff:ff:ff
    /etc/wpa_supplicant/wpa_supplicant.conf
    network={
    ssid="Sherwood"
    proto=WPA
    key_mgmt=WPA-PSK
    pairwise=TKIP
    group=TKIP
    psk="<mykey>"
    wpa_ptk_rekey=600
    I used wpa_supplicant to connect using the configuration above
    wpa_supplicant -B -Dwext -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf
    ip addr
    2: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether 00:19:d2:c5:16:bb brd ff:ff:ff:ff:ff:ff
    inet 192.168.0.3/24 brd 192.168.0.255 scope global wlan0
    inet6 <ipv6 addr>/64 scope global dynamic
    valid_lft 294sec preferred_lft 114sec
    inet6 <ipv6 addr 2>/64 scope link
    valid_lft forever preferred_lft forever
    ping google.com
    PING google.com (173.194.33.3) 56(84) bytes of data.
    64 bytes from sea09s01-in-f3.1e100.net (173.194.33.3): icmp_req=1 ttl=56 time=26.6 ms
    64 bytes from sea09s01-in-f3.1e100.net (173.194.33.3): icmp_req=2 ttl=56 time=26.8 ms
    64 bytes from sea09s01-in-f3.1e100.net (173.194.33.3): icmp_req=3 ttl=56 time=26.4 ms
    64 bytes from sea09s01-in-f3.1e100.net (173.194.33.3): icmp_req=4 ttl=56 time=26.4 ms
    --- google.com ping statistics ---
    4 packets transmitted, 4 received, 0% packet loss, time 3004ms
    rtt min/avg/max/mdev = 26.468/26.620/26.886/0.259 ms
    ping6 ipv6.google.com
    PING ipv6.google.com(pz-in-x68.1e100.net) 56 data bytes
    64 bytes from pz-in-x68.1e100.net: icmp_seq=1 ttl=55 time=95.3 ms
    64 bytes from pz-in-x68.1e100.net: icmp_seq=2 ttl=55 time=41.0 ms
    64 bytes from pz-in-x68.1e100.net: icmp_seq=3 ttl=55 time=44.3 ms
    64 bytes from pz-in-x68.1e100.net: icmp_seq=4 ttl=55 time=34.6 ms
    --- ipv6.google.com ping statistics ---
    4 packets transmitted, 4 received, 0% packet loss, time 3003ms
    rtt min/avg/max/mdev = 34.608/53.830/95.332/24.217 ms
    So it does work without networkmanager.

  • IBook can no longer connect to wireless network

    I have a wireless network set up in my home using a Linksys wireless router. While it has worked fine in the past, I can no longer connect to it with my G4 iBook running 10.3.9. It shows up in my network connections with a strong signal but when I open a browser it can't connect to the internet. When I try to open 'Internet Connect' to explore the issue I get the spinning beach ball and have to Force Quit. When I open the network status window, I get a message for Airport that says "Airport is connected to the network 'name of my network'. Airport does not have an IP address and cannot connect to the Internet".
    I have an iMac G5 connected to the router through ethernet cable and it works fine. I have an iMac G4 connected wirelessly to the same wireless router and it works fine. I have a Dell laptop that can also connect wirelessly to the wireless router with no problem.
    It appears something is corrupt with the Internet Connect utility?
    Any help or suggestions are greatly appreciated.
    Thanks.
    Doug

    What type of IP address are you getting? If it starts with 169, it indicates that your iBook can not connect to the DHCP server provided by the router.
    Have you enabled the MAC address filtering on the router? If so, remember that you must add the AirPort MAC address for your iBook.
    If you have a correct IP address, perhaps it is a DNS issue. See KB 106798, Mac OS: Troubleshooting "A connection failure has occurred", "The specified server could not be found" or Similar Messages.

  • Can't Get Time Capsule to Extend Airport Extreme Wireless Network

    I've searched this forum and read dozens of listings, but nothing I've found gives me a answer for the problem I'm having.
    I had an existing network consisting of three Airport Extreme routers, one the master/DHCP server and the other two to extend the network. All of the routers were configured for 802.11n 5 GHz only service.
    After much frustration trying to use Time Machine to back up to external disks attached to Airport Extremes as well as disks attached to other Macs, I gave up and bought a Time Capsule.
    I have been trying for about six months on and off to get the Time Capsule configured as an extension to the main Airport Extreme as the other two Extremes are.
    Nothing I've tried will cause the TC to extend the network. It always comes up with a yellow light and error messages saying that there is a problem with the wireless network and a problem with the internet connection and, sometimes, a third message that I don't remember.
    After my initial efforts, I just gave up and plugged the danged TC into the remote AE that is closest to where I use my MacBook Pro and it worked. But I wanted it to REPLACE that AE instead of being an appendage to it.
    Due to TC/TM problems, I've twice lost the entire TM backup off of the TC, and tonight I decided it was time to start over. I've encountered the same problems as before, and so finally moved the TC to my home office rack where the main AE is located and plugged it into the AE directly. TM is now backing up, but at a snail's pace (which is why I wanted the TC to be located in the same room where I use the laptop).
    Has anyone had success or failure extending a multiple-unit AE network with a TC on 802.11n 5 GHz (not WDS)? If not, has your experience been similar to mine; if so, what did you do that I haven't?
    Any specific help will be greatly appreciated.

    Yes, I suppose I could do that. But if the wireless extension isn't working in one direction there's no guarantee it'll work in the other direction; and I was trying to avoid upending my entire setup.
    And no, I'm not bridging the units with hard-wired cabling; I'm attempting to use wireless to extend them...NOT WDS, which is for 802.11B/G mode, but the 802.11N wireless extension mode that's available on these Apple products.

  • Officejet pro 8600 will not connect to wireless network

    I have an new Officejet Pro 8600 that I am trying to set up.  I have run the the wireless network setup wizard multiple times.  It recognizes the wireless network router asks for the WEP code and then thinks for about 5 minutes before returning a message: "Unable to connect to the network" 
    The wireless network test results suggestes that MAC address filtering may be the problem.  There is no MAC filtering function activated on our wireless router.
    The wireless router is a Verizon Actiontec MI424-WR    802.11 b & n
    We have computers running both Windows XP and MAC OS X.
    One of the reasons that we purchased this printer is for the wireless capabilities.  If it will not conect to the web then it may be going back.

    Hello,
    Based on the provided details, I believe the issue have something to do with the wireless security settings of your router.
    Please follow the steps below to access the Advanced Security Settings:
    http://www22.verizon.com/ResidentialHelp/FiOSInternet/Networking/Setup/ActiontecMI424/125511.htm
    Below you will see the Network Authentication settings.
    Select either Open System Authentication or Both.
    Shared Key Authentication is not supported by the printer, and i believe this might be the cause for the connection failure.
    Please let me know of any change,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • HP Deskjet 3050 - Unable to connect to WPA secured wireless network

    Hello,
    My first post here so please excuse any faux pas on my part.  I bought this HP Deskjet 3050 a week ago and have been waging war with it ever since.  I'd be really grateful if someone could possibly advise on how I can resolve this.
    I am unable to connect the printer to my secured wireless network, even though other computers, cell phones, etc. are connected without issue.  I have tried WPA, WPA2 and WPA2-Mixed security modes with the same failure. Specifically, the connection wizard reaches 66% and then displays the error that the wizard is unable to find network/printer.  If I disable the security, the printer connects fine.
    I'm using a Linksys WRVS4400N router with firewall and associated firewall settings disabled.  The router is broadcasting on 802.11G/N mixed mode.
    I'm installing the software supplied on the setup CD on a Windows XP SP3 system.  I have confirmed that the network the PC and printer are connected to are the same.
    A question as well, if I may:  I haven't tried these drivers yet but I see there are updated drivers for the printer dated 14/12/2010.  The release notes indicate improved networking, but don't elaborate beyond this.  Does anyone know if there was a known problem with connecting to secured networks that has now been fixed?
    Finally, just a note that I'm partially sighted and am using a screen reader on all systems.  I'll try my best to be as helpful as I can but please do excuse me if I occasionally can't find settings, etc. on screen and need a bit more detailed help.
    Thanks in advance for your help, which I really will appreciated.
    Have a pleasant day,
    All the best for now and take care,
    Hussein.
    It's not the fact it can't be done, it's the fact it hasn't been done, yet.
    This question was solved.
    View Solution.

    HI,
    firstly, apologies for the delay getting back to you.  Poor health has meant I've had little time nor inclination to do much on the computer side of htings.
    Anyway, I'm please to say the problem with the HP 3050 failing to connect to my network is now solved.  It seems to be a bug with the setup software, and that seems to include the latest version posted Dec 2010.
    To resolve the problem, I did the following:
    1. Disable all security options for the network, so it's just an open network.
    2. Connect the HP 3050 to the network using the setup wizard. This time it connected OK for me.
    3. Locate the printer's IP address.  I used the client list table accessed through my router's interface. You may be able to get this through the printer's on-screen menu, but as I'm partially sighted, this wasn't an option for me.
    4. Log into the printer's control panel at http://ip.address.of.printer e.g. http://192.168.2.108
    5. Under the advanced options, configure the settings for the network, including security protocol and passphrase.  Remember to enter the SSID of the network exactly as configured on the router.
    6. Apply the settings and log out of the printer's control panel.
    7. Log back into the router's control panel and re-apply the security options.  Be sure that they match those match those entered for the printer.
    Hopefully this will be of use to others in the same position.
    Thanks again for your time.
    Best,
    H.
    It's not the fact it can't be done, it's the fact it hasn't been done, yet.

  • Netctl fails to connect to a wireless network and does not give detail

    If I try to connect to a wireless network (WEP, DHCP) using netctl I get "Jon for netctl@wlp2s0\x2dnetworkname.service failed." and two commands (journalctl -xn and systemctl status ...) that should give details about the error.
    However, both of them give the following lines:
    oct 05 14:44:25 laptop network[422]: Starting network profile 'wlp2s0-networkname'...
    oct 05 14:44:30 laptop network[422]: Failed to bring the network up for profile 'wlp2s0-networkname'
    oct 05 14:44:30 laptop systemd[1]: netctl@wlp2s0\x2dnetworkname.service: main process exited, code=exited, status=1/FAILURE
    oct 05 14:44:30 laptop systemd[1]: Failed to start Networking for netctl profile wlp2s0-networkname.
    oct 05 14:44:30 laptop systemd[1]: Unit netctl@wlp2s0\x2dnetworkname.service entered failed state.
    Just one line saying that it was trying to connect and four lines repeating the same thing (connecting failed), but it does not give any detail at all.
    The netctl profile is:
    Interface=wlp2s0
    Connection=wireless
    Security=wep
    ESSID=networkname
    IP=dhcp
    Key=\"hex-password
    Last edited by eduardosm (2014-10-05 14:01:02)

    MoonSwan wrote:Either this Key=\"hex-password was a typo when you cut & pasted that code or your issue is that you need a closing " symbol.  So your line should read:  Key=\"hex-password".
    If you look at the netctl.profile man page, it explains some special quoting rules at the end.  The literal double-quote (or escaped double-quote) actually just results in a non-quoted string when passed from netctl to the underlying supporting software.  This is apparently necessary if the WEP key is in hexadecimal.

  • Suddenly our windows 7 clients can't connect to our wireless network due to a cert error?

    Our company uses a Ruckus setup for our wireless network.  The laptops have to have a certificate on them issued from our CA and be a member of AD group.  Yesterday we noticed that nobody could connect to the internal wireless network.  In
    the security logs for the computers there is a this error:
    A request was made to authenticate to a wireless network.
    Subject:
        Security ID:        host/xxx-xxxxxxx
        Account Name:        -
        Account Domain:        -
        Logon ID:        0x0
    Network Information:
        Name (SSID):        Forest River Internal
        Interface GUID:        {53b8a5f4-e910-4e3e-ab88-eb4f46356e1f}
        Local MAC Address:    68:94:23:00:26:1F
        Peer MAC Address:    C4:01:7C:4A:88:58
    Additional Information:
        Reason Code:        Explicit Eap failure received (0x50005)
        Error Code:        0x80420202
        EAP Reason Code:    0x80420202
        EAP Root Cause String:    The authentication failed because certificate required for this network has expired on the server computer
        EAP Error Code:        0x80420202
    this cert was is supposed to be good for another year, is there anyway that I can get the CA server to renew this cert or do I need to issue a new one and distribute it?  The other issue I'm running into is I can't seem to get my CA to issue a new computer
    cert.  All the servers are 08 R2 boxes.

    Hi,
    Do you have any progresses on this issue by now?
    Here is a related KB article below:
    Windows 7 does not connect to an IEEE 802.1X-authenticated network if an invalid certificate is installed
    http://support.microsoft.com/kb/2494172
    Best Regards,
    Amy Wang

  • Internet shuts off after a few minutes requiring wireless network reset on windows 8.1

    I recently upgraded from windows eight to windows 8.1 I do not know if this has anything to do with anything I have a 64 bit OS. My Internet goes off by itself every 5 minutes even though my wireless icon at the lower right of the screen still shows connected
    I had an error message in the last event in it said that might DHCP settings were out of range. I get my internet at my house through a wireless portable hotspot through my smart phone. But i haven't ever had any problems before and i only have this problem
    on this network. If i turn airplane mode on and reset my network card, the internet will come back to life but soon die. i don't experience this problem while on a different network or if i'm on WiFi. This s really annoying please help
    IP CONFIGURATION NOV 3
    Windows Network Diagnostics Publisher details
    Issues found Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding
    Detected
    Contact your network administrator or Internet service provider (ISP) Completed
    Issues found Detection details
     Your computer appears to be correctly configured, but the device or resource (DNS server) is not responding Detected
    Contact your network administrator or Internet service provider (ISP) Completed
    Windows can't communicate with the device or resource (DNS server). The computer or service you are trying to reach might be temporarily unavailable. If the device or resource is nearby and you have access to it, make sure it is turned on and connected to
    the network.
    Detection details
    Diagnostics Information (Network Adapter) Details about network adapter diagnosis:
    Network adapter Wi-Fi driver information:
    Description . . . . . . . . . . : Broadcom 802.11n Network Adapter Manufacturer . . . . . . . . . : Broadcom Provider . . . . . . . . . . . : Microsoft Version . . . . . . . . . . . : 6.30.223.102 Inf File Name . . . . . . . . . : C:\WINDOWS\INF\netbc64.inf
    Inf File Date . . . . . . . . . : Thursday, August 22, 2013 7:01:07 AM Section Name . . . . . . . . . : BCM43XNG_NT63 Hardware ID . . . . . . . . . . : pci\ven_14e4&dev_4727 Instance Status Flags . . . . . : 0x180200a Device Manager Status Code . . : 0
    IfType . . . . . . . . . . . . : 71 Physical Media Type . . . . . . : 9
    Diagnostics Information (Wireless Connectivity) Details about wireless connectivity diagnosis:
    Information for connection being diagnosed Interface GUID: 0ed45843-c0ab-4a24-b372-c292afdf238a Interface name: Broadcom 802.11n Network Adapter Interface type: Native WiFi
    Connection incident diagnosed Auto Configuration ID: 11 Connection ID: 10
    Connection status summary Connection started at: 2013-11-03 17:22:59-236 Profile match: Success Pre-Association: Success Association: Success Security and Authentication: Success
    List of visible access point(s): 1 item(s) total, 1 item(s) displayed
    BSSID BSS Type PHY Signal(dB) Chnl/freq SSID
    20-64-32-75-3E-19 Infra -25 6 $@mM¥ ° Ř0©ł<¡ț
    Connection History
    Information for Auto Configuration ID 11
    List of visible networks: 1 item(s) total, 1 item(s) displayed BSS Type PHY Security Signal(RSSI) Compatible SSID
    Infra Yes 100 Yes $@mM¥ ° Ř0©ł<¡ț
    List of preferred networks: 25 item(s) Profile: GSIIskyrocket_227 SSID: GSIIskyrocket_227 SSID length: 17 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile:
    $@mM¥ ° Ř0©ł<¡ț SSID: $@mM¥ ° Ř0©ł<¡ț SSID length: 22 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028001 Profile: sam SSID: sam SSID length: 3
    Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: $@mM¥ ° Ř0©ł<¡ț SSID: $@mMÂ¥ ° Ř0©ł<¡ț SSID length: 22 Connection mode: Infra Security: Yes
    Set by group policy: No Connect even if network is not broadcasting: No Connectable: Yes Profile: sammy SSID: sammy SSID length: 6 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No
    Reason: 0x00028003 Profile: $@mM¥ ° Ř0©ł<¡ț SSID: $@mMÂ¥ ° Ř0©ł<¡ț SSID length: 23 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Plaza_Inn
    SSID: Plaza_Inn SSID length: 9 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Plaza Inn AP SSID: Plaza Inn AP SSID length: 12 Connection mode: Infra Security:
    No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Cisco33718 SSID: Cisco33718 SSID length: 10 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting:
    No Connectable: No Reason: 0x00028003 Profile: Comfort SSID: Comfort SSID length: 7 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Comfort Inn SSID: Comfort
    Inn SSID length: 11 Connection mode: Infra Security: No Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: «$@mM¥»
    ®∅¢|<£†"™ SSID: «$@mM¥»®∅¢|<£†"™ SSID length: 30 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: …$@Mm€=®0¢°|<•¡+…™
    SSID: …$@Mm€=®0¢°|<•¡+…™ SSID length: 32 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: ApacheCorp SSID: ApacheCorp SSID length:
    10 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: SAMMY ROCKiT SSID: SAMMY ROCKiT SSID length: 12 Connection mode: Infra Security: Yes Set by group policy:
    No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: S@MMY ®0¢K°it•T SSID: S@MMY ®0¢K°it•T SSID length: 20 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting:
    No Connectable: No Reason: 0x00028003 Profile: $@mM£ ®0¢|<•¡+ SSID: $@mM£ ®0¢|<•¡+ SSID length: 20 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason:
    0x00028003 Profile: GSIIskyrocket_0079 SSID: GSIIskyrocket_0079 SSID length: 18 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: MARTIN-PC_Network SSID:
    MARTIN-PC_Network SSID length: 17 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: Sammy Rock'it SSID: Sammy Rock'it SSID length: 13 Connection mode: Infra
    Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: GSIIskyrocket_6362 SSID: GSIIskyrocket_6362 SSID length: 18 Connection mode: Infra Security: Yes Set by group policy: No Connect
    even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: AndroidHotspot2275 SSID: AndroidHotspot2275 SSID length: 18 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable:
    No Reason: 0x00028003 Profile: Sammy Rockitt SSID: Sammy Rockitt SSID length: 13 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: SAMMY ROKiTT SSID: SAMMY
    ROKiTT SSID length: 12 Connection mode: Infra Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003 Profile: GSIIskyrocket_2275 SSID: GSIIskyrocket_2275 SSID length: 18 Connection mode: Infra
    Security: Yes Set by group policy: No Connect even if network is not broadcasting: No Connectable: No Reason: 0x00028003
    Information for Connection ID 10 Connection started at: 2013-11-03 17:22:59-236 Auto Configuration ID: 11 Profile: $@mM¥ ° Ř0©ł<¡ț SSID: $@mMÂ¥ ° Ř0©ł<¡ț SSID length: 22 Connection mode: Infra Security: Yes Pre-Association and Association Connectivity
    settings provided by hardware manufacturer (IHV): No Security settings provided by hardware manufacturer (IHV): No Profile matches network requirements: Success Pre-association status: Success Association status: Success Last AP: 20-64-32-75-3e-19 Security
    and Authentication Configured security type: WPA2-PSK Configured encryption type: CCMP(AES) 802.1X protocol: No Key exchange initiated: Yes Unicast key received: Yes Multicast key received: Yes Number of security packets received: 0 Number of security packets
    sent: 0 Security attempt status: Success Connectivity Packet statistics Ndis Rx: 0 Ndis Tx: 0 Unicast decrypt success: 20 Multicast decrypt success: 0 Unicast decrypt failure: 176 Multicast
    Diagnostics Information (Wireless Connectivity) Details about wireless connectivity diagnosis:
    For complete information about this session see the wireless connectivity information event.
    Helper Class: Auto Configuration Initialize status: Success
    Information for connection being diagnosed Interface GUID: 0ed45843-c0ab-4a24-b372-c292afdf238a Interface name: Broadcom 802.11n Network Adapter Interface type: Native WiFi
    Result of diagnosis: There may be problem
    Diagnostics Information (Wireless Network Adapter) Details about wireless network adapter diagnosis:
    For complete information about this session see the wireless connectivity information event.
    Helper Class: Native WiFi MSM Initialize status: Success
    Information for connection being diagnosed Interface GUID: 0ed45843-c0ab-4a24-b372-c292afdf238a Interface name: Broadcom 802.11n Network Adapter Interface type: Native WiFi Profile: $@mM¥ ° Ř0©ł<¡ț SSID: $@mMÂ¥ ° Ř0©ł<¡ț SSID length: 22 Connection
    mode: Infra Security: Yes Connect even if network is not broadcasting: No
    Result of diagnosis: There may be problem
    Network Diagnostics Log File Name: 9E4B2429-D02B-4728-B515-A825BD2B29C5.Diagnose.0.etl
    Other Networking Configuration and Logs File Name: NetworkConfiguration.cab
    Collection information Computer Name: NASTYMCNASTYJR Windows Version: 6.3 Architecture: x64 Time: Sunday, November 3, 2013 5:26:53 PM Publisher details
    Windows Network Diagnostics Detects problems with network connectivity. Package Version: 1.0 Publisher: Microsoft Windows
    Windows IP Configuration
    Host Name . . . . . . . . . . . . : NastyMcnastyJr Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No
    Ethernet adapter Local Area Connection:
    Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TeamViewer VPN Adapter Physical Address. . . . . . . . . : 00-FF-5D-13-26-21 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration
    Enabled . . . . : Yes
    Wireless LAN adapter Local Area Connection* 11:
    Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter Physical Address. . . . . . . . . : F6-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . :
    Yes Autoconfiguration Enabled . . . . : Yes
    Wireless LAN adapter SAMMY McNASTY:
    Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11n Network Adapter Physical Address. . . . . . . . . : F4-B7-E2-50-09-38 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Link-local IPv6
    Address . . . . . : fe80::3107:66bc:cf1f:c776%4(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.43.3(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Friday, November 1, 2013 9:50:20 PM Lease Expires .
    . . . . . . . . . : Saturday, November 2, 2013 12:56:46 AM Default Gateway . . . . . . . . . : 192.168.43.1 DHCP Server . . . . . . . . . . . : 192.168.43.1 DHCPv6 IAID . . . . . . . . . . . : 83146722 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-19-F1-98-B4-20-89-84-84-61-BB
    DNS Servers . . . . . . . . . . . : 192.168.43.1 NetBIOS over Tcpip. . . . . . . . : Enabled
    Ethernet adapter Ethernet:
    Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom NetLink (TM) Gigabit Ethernet Physical Address. . . . . . . . . : 20-89-84-84-61-BB DHCP Enabled. . . . . . . . . . . :
    Yes Autoconfiguration Enabled . . . . : Yes
    Log Name: System Source: Microsoft-Windows-UserPnp Date: 10/26/2013 7:52:23 PM Event ID: 20003 Task Category: (7005) Level: Information Keywords:
    User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management has concluded the process to add Service vwifibus for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 with the following status: 0.
    Event Xml: 20003 0 4 7005 0 0x8000000000000000 5118 System NastyMcnastyJr vwifibus \SystemRoot\system32\DRIVERS\vwifibus.sys PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1 false true 0   Log Name: System Source: Microsoft-Windows-UserPnp
    Date: 10/19/2013 3:29:12 PM Event ID: 20001 Task Category: (7005) Level: Information Keywords:
    User: SYSTEM Computer: NastyMcnastyJr Description: Driver Management concluded the process to install driver netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf for Device Instance ID PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1
    with the following status: 0x0. Event Xml: 20001 0 4 7005 0 0x8000000000000000 2015 System NastyMcnastyJr netbc64.inf_amd64_0df63b5297d0f820\netbc64.inf 6.30.223.102 Microsoft PCI\VEN_14E4&DEV_4727&SUBSYS_E042105B&REV_01\4&3265ADAB&0&00E1
    {4D36E972-E325-11CE-BFC1-08002BE10318} false false false 0x0 Broadcom 802.11n Network Adapter   Log Name: System Source: Microsoft-Windows-DNS-Client Date: 11/2/2013 12:24:59 AM Event ID: 1014 Task Category: (1014) Level: Warning Keywords: (268435456) User:
    NETWORK SERVICE Computer: NastyMcnastyJr Description: Name resolution for the name www.google.com timed out after none of the configured DNS servers responded. Event Xml: 1014 0 3 1014 0 0x4000000010000000 34771 System NastyMcnastyJr www.google.com 128 02000000C0A82B01000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000

    Hi,
    You can refer to this blog, and try to roll back to the older version of network adapter driver to check the results.
    Windows 8.1 Wifi showing "limited" or "No Internet Access"
    http://blogs.technet.com/b/dennis_schnell/archive/2013/08/31/windows-8-1-wifi-showing-quot-limitied-quot-or-quot-no-internet-access-quot.aspx
    Meanwhile, please check with the manufacturer of your router to update the firmware.
    If the issue persists, please help to collect following information for further research:
    Over an Administrative command prompt.
    C:\> netsh ras set tracing * enabled
    Over an Administrative command prompt.
    C:\> netsh trace start scenario=netconnection capture=yes tracefile=c:\net.etl
    Over an Administrative command prompt.
    C:\> netsh ras set tracing * disabled
    Over an Administrative command prompt.
    C:\> netsh trace stop
    From the Client:
    b)            C:\Net.etl and C:\Net.cab
    Upload these files in SkyDrive and post back the shared link.
    Keep post.
    Kate Li
    TechNet Community Support

Maybe you are looking for

  • How to configure Integration Directory for Integration process async sync

    Hi Experts,                  I am confused about doing configuration in Integration Directory i.e receiver determination,interface determination and receiver agreement and sender agreement for my integration process as it involve synchronous send at

  • XI Content for RosettaNet

    I downloaded the RosettaNet content and imported it into the repository. I have 2 questions: 1. As per the documentation (Business package for Rosettanet Configuration Guide - order to Invoice using XI), it should have 2 Software Components: Rosettan

  • Email receipts does not seem to be working

    In what way is this a better system ? Does no-one ever actually test these things before launching them ? Unluckily, my BT mail went live today. I have reset all my email accounts including sub accounts. On an average day I will receive around 50 per

  • Plant Simulation for PID Control

    Hi, This is my first major project with LabVIEW. I am designing a PID controller to control the speed of an electric motor.  It is required to keep the speed at an input value when the mechanical load changes. I would like to simulate the plant (i.e.

  • Updated to 6.0 and it starts with this error: Exc in ev handl: TypeError: brw is undefined

    Just updated to 6.0 and now when I open it it starts with a popup box that says:Exc in ev handl: TypeError: brw is undefined. If I close it it opens a new window with the same popup box. I've tried to re download but the same thing happens. Any ideas