Wireless network?

Okay, I had this problem with my first iMac and now I'm having it again with my mini G4. I am on a windows PC which connects to our wireless network (service provided by SBC Yahoo! DSL) with out any problems. The macs, however, hate connecting! My iMac wouldn't connect, I was up from 12 AM to 4 AM trying to get on the network and then a few hours (of sleep) later, turned it on again, and went to a gig that I had to perform at and then when I came back, Safari said that it was working! I tried the network set up utility, the network diagnostics, and still, nothing. Every time I open Safari it goes "You are not connected to the internet Safari can't open livepage.apple.com...etc etc" I've restarted the computer, restarted the DSL modem, restarted the wireless router, turned off the modem then turned off the router and then finally turning on the modem and turning on the router and still, nothing! I'm using a NetGear wireless router and I can't connect to it. I am pretty sure it's not the airport on the mini because I can connect to the wireless router, I just can't actually acccess the internet. Help would be great, ASAP, any advice you can give or how you connected to the internet via your wireless network. Thanks!

Go into your router and check your settings - you want to look for a setting like 'maximum number of DHCP users' or where a range or number of wireless addresses are defined. This may be on a configuration screen where you set up the router connection to the internet. If DHCP users is set to, for example, 1, it would allow 1 user to fully access the internet. Anyone else would see a wireless signal, ie, on your mac menu bar you'd see bars on the airport wireless icon, but receive the message from the browser about not being able to connect to the internet, which is maddening. Find the setting and increase it to say 5, and see if that fixes it.
Then go back and re-enable everything you tried turning off in debugging, ie:
Disable SSID transmission (for wireless signal security)
Use WPA-PSK security (for wireless signal security)
Use mac address filtering (for internet usage security)

Similar Messages

New C310 - Wireless working FAIL - Printer's wireless network seems to be dead

Product: HP Photosmart Premium C310
OS: Windows Vista 64 bit and Windows 7 64 Bit
Error: Wireless working: FAIL
Changes: No changes since this is the first install of this printer ever
Description:
I've just unpacked my new C310 as a replacement for my older HP Inktjet 3845.
But when trying to install the wireless network everything I try seems to fail.
Printer doesn't detect my wireless network (blue wireless led is blinking 1sec on - 1sec off )
HP Network test tool on my laptop (standing next to the printer to test it's location ) gives no issues whatsoever, wireless network is strong and working very well.
Settings of the wifi connection are WPA security, no WPS, Channel 11, ... .
When I run a Wireless Network Test report from the printer menu, the result is (= printout)
* Wireless On => PASS
* Wireless Working => FAIL
* All the other points below are on status NOT RUN so no connection at all ...
Solutions tested:
Tried to reboot printer while waiting 1 minute in between => No result
Reset to factory settings straight on the printer => No result
Tried to run the Wireless network Setup Wizzard several times without merit.
Explanations on the forums seemed to be that this might be a faulty wireless network card in the printer?
Since this is one of the reasons of buying this item, I do need it to work.
Can anyone provide me advice/next steps?
Kind regards,
Raf

Great info and troubleshooting, thanks!
Unfortunately, I think you have a dead radio. This is how to contact HP support: www.hp.com/go/totalcare
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

IPod Touch suddenly no longer can connect to Wireless Network.

Hello, I have yet to find an answer to my problem so maybe you guys can help.
I have had my iTouch for at least 2 years and have never had a problem with it, and constantly used it to connect to the wireless network in our home.
However, starting two days ago, my iTouch can rarely detect the network (even when right next to the router) and if it does, it is unable to join because it loses the signal almost immediately. After much troubleshooting, (laptops connect fine, friends iTouch's connect fine) I have determined that something is wrong with mine.
The only thing I can think of that happened that day, was that night it had gotten extremely cold. (Montana, oh yay.) Could this have caused the malfunction?
Any insight would be appreciated!

Given that it got really cold and you brought it inside, condensation could have formed on the inside bits. Dump it in a bag of rice or a jar with those silica gel packages for a couple of days and see what happens.
If you still have problems connecting, try power cycling your router and resetting your touch's network settings.

Apple TV 1st Gen can no longer connect to wireless networks

My Apple TV (1st Gen) has recently lost the ability to connect to either of our wireless networks at home. I rean the diagnostics at the reset screen and the Apple TV says it is performing normally. In the settings, whenever I attempt to connect to a wireless network, I am now only offered "Other..." as a choice. Proceeding to the next screen, I enter the name of the network closest to the Apple TV -- an Airport Extreme set up for 5 GHz that this Apple TV connected with daily up until 2 days ago. The Airport base station is perfoming normally, as my MacBook Pro can see it and establish a network connection without any difficulty. The issue is limited to the Apple TV. I did a Factory Restore, and now when I go to Wireless Network > "Other..." > Enter the name of the wireless network" the resuit is always the same, and error message stating: "There was a problem connecting to the network. Check your settings and try again. (-4)".
This message comes up almost immediately, without requesting a WiFi password -- suggesting to me that this Apple TV has lost the ability to connect to ANY wireless network due to a hardware failure.
Q: Has anyone else in the Support Community had a similar experience with their 1st Gen Apple TV, and if so, did you find a solution to it?
Note: When I first noticed the connction to this Apple TV had gone stale (greyed out in the iTunes Airplay Speakers list), and prior to doing the Factory Restore, I could play back iTunes content stored on the hard drive, but could not connect to the local wireless networks. I noticed that the Apple TV was running very hot -- it has alwasy run pretty hot to the touch.
If this Apple TV has died, I will get a 3rd Gen Apple TV, but wiill then have to work through the HDMI to Composite video + Audio issues, as this Apple TV is connected to our older (non-HDMI) TV.

Follow-up: Able to connect with ethernet cable, downloaded software updates, connected to iTunes, and synchec content.
Next, disconnected the ethernet cable. ATV1 froze and was restarted using the Menu + ( - ) combo on the remote. Re-ran diagnostics yeilds: Apple TV is working fine.
Restarted, then went to configure the Wirelss settings. Apple TV once again does not show either of the two wireless networks. Selecting "Other..." and entering the SSID yields the same immediate response:
"There was a problem connecting to the network. Check your settings and try again. (-4)"
No change on the wireless front :-( Bummer.
Looks like an ethernet connection is the only option left to continue using this Apple TV 1st Gen.
Thanks for your help. -- Paul

Can no longer see any wireless networks

Hello,
I've had my macbook for just under a year now and have never had a problem seeing/connecting to any wireless networks in the past. However, over the past few days I have had issues connecting to my router. It keeps kicking me off every 15 or 20 minutes and when I try to reconnect it often gives me a timeout error. I have reset the router countless times and have even reset it to factory settings and triple checked that the firmware is up-to-date. I felt it was a router issue until this morning; it kicked me off so I reset my router and turned my airport off&on but now I cannot even see the network nor the other 10 (or so) networks that are typically viable. Since I cannot even see the wireless networks across the block anymore I seems like this has to be a computer issue (or at least the computer has to be involved to some degree).
I've tried to make an appointment at the genius bar but they are booked solid, as in they don't have any available appointments available at any time, even days in the future. Has anyone seen this problem before? Is my wireless card is on the fritz? Does anyone know of any potential software issues that could cause this?
Thanks in advance.

You can skip the Genius Bar and just call AppleCare directly.
However, a couple of suggestions:
• create a new location in your Network preferences; does the problem persist?
• create a new user and log in to that account; does the problem persist?
This one's more extreme: Do an Archive and Install, which will completely reinstall the system but preserve user accounts and data:
http://support.apple.com/kb/HT1545
If these don't help, then it may well be hardware.
Good luck!

HPM1212nf MFP i can't scan but wireless network works fine for printing

i have the MFP set up fine for printing over a wireless network. Any idea on what more i need to do to get the machine to accept a scan command from the computer using HP Laserjet Scan?

Hi there @bc123!
Thanks for contacting the HP Forums!
I see that your having a communication issue with the HP LaserJet when it comes to scanning to the computer, and I would be happy to provide you with my assistance.
A good place to start when troubleshooting scanning is to ensure the CD was installed correctly on your computer. If the CD is unavailable then I can provide you with a link to the HP driver download: Drivers & Downloads
In the link provided you will want to:
1.enter your printers model number and click GO
2.select your printer model
3.select your operating system and click NEXT
4.Click on Driver - Product Installation Software (‏1)
5.Click DOWNLOAD next to the full feature software
To provide you with a more direct link to your software and to better assist you, would you please provide me with the following information:
1. What operating system version the computer is running (ex. Mac, Windows, etc.).
Bellow are 2 links I located from HP and Macintosh on how to locate your version of operating system.
Which Windows operating system am I running?
Finding the OS X version and build information on your Mac
2. If the computer is running Windows I will need to know what version (ex. 32-bit or 64-bit).
I have provided another link from the HP web site showing you how to check if its 32-bit or 64-bit
Is the Windows Version on My Computer 32-bit or 64-bit?
3. Laserjet model number (ex. P1102w, CP1025, etc.).
Please post back with the requested information, as well as the results of your troubleshooting.
Let me know if this was helpful!
Cbert
I work on behalf of HP.
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" at the bottom of this post to say “Thanks” for helping!

The Difference between Extending a Wireless network and WDS?

I have an Extreme (n) and an Express (n).
I want to make sure the signal is strong upstairs and share a printer (connected to the express) and use AirTunes. I also may add an external drive to the Extreme.
What's the difference between Extending a Wireless Network and using WDS? Will there be a speed difference?
Message was edited by: J. Christopher Edwards

I think you don't get it
If I have another draft N router that operates at 2.4G and I have only n devices I can still use WDS and it will connect using draft n in the 2.4G band.
If one g device connects to the network will go in mixed mode.
The AEBS will still report 130 Mbps for your n clients and 54 for your g clients.
If the other router is g only obviously you can't connect between the two router at n mode but still the AEBS will be in mixed mode and not in g. The Extreme will still report 130 Mbps for the connected n clients.
I can tell you that because I have actually implemented it am not taking off the documentation.
The same device if I try to use the "extend n network" does not even see the AEBS but will happily keep the n in the WDS mode and though the bandwidth is halved it is still more than g.
In any case enough for this!

Thinkpad X200 Vista Business 32-bit Wireless network problems

Hey guys!
I seem to have a persistent problem with my two Lenovo Thinkpad X200, which I simply can't manage to figure it.
I have recently restored the computers to factory settings, which meant downgrading from Windows 8 to Windows Vista Business 32-Bit.
Now, everything with the installation went as planned until I had to test if everything was working. A lot of the drivers seem to be missing and since I do not still have the original manufacturer's disc, I do not know what to do.
I downloaded the ethernet driver from Lenovo's website and that is now fully functional.
I have also tried everything in regards to making the wireless internet work, but without any luck. When I try connecting to the wireless internet, Windows simply can't detect any networks and when I try using Windows function to find a solution to the problem it simply says "This computer does not have a wireless network adapter installed and configured".
I have tried downloading all the wireless lan driver for Windows Vista 32-bit from Lenovo's website, but I still cannot get the wireless network to work.
Any help would be highly appreciated
Thank you in advance

Does the wireless LED light up?
Try Fn+F5?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

How do i use the airport extreme to extend my wireless network

How do i connected my airport extreme up to my existing network so that it can extend my wireless through out the house ??
Can it be done wirelessly or do i need an ethernet cable thats about 10m ?
Keith

The AirPort Exteme can "extend" your existing wireless network (using wireless only) if it is being provided by another Apple router.
If your current main router is not an Apple product, then you will need to plan to connect the AirPort Extreme to your router using an Ethernet cable.
Post back for more information if needed.

How do I include my Airport Express with my base Airport Extreme to extend my in house wireless network??

How do I set up wireless network extension/expansion adding Airport Express to existing Airport Extreme Network??

OK, thanks for the clear information, this really helps.
Locate the AirPort Express about half way between the AirPort Extreme and the general area that needs more wireless signal coverage. The more that you have line-of-sight between the AirPort Extreme and AirPort Express, the better the performance will be.
Power off the AirPort Express for a few minutes
Hold in the reset button firmly...and keep holding for an additional 10 seconds while you simultaneously plug the power cord back into the back of the AirPort Express
Release the reset button after the hold period and allow a full minute for the Express to restart to a slow, blinking amber light
This process is tricky.....you almost have to have 3 hands to do this.
If you have an iPad or iPhone, the setup is almost too easy to be true. In that case.....
Tap on Settings (gear icon) on the home screen
Tap on WiFi
Under the heading of Setup a New AirPort Base Station....
Tap on AirPort Express
The utility will analyze things for a minute, then suggest that the Express be configured to extend the AirPort Extreme network
Type in a device name that you want to use, then tap Next
The utility will set up everything for you automatically. When you see the message of Setup Complete, tap Done and you are good to go.
If you want to use the Mac running (10.6.8) for the setup.......
Make sure that the wireless is turned on at the Mac
Open Macintosh HD > Applications > Utilities > AirPort Utility
Select the AirPort Express and click Manual Setup
Click the Base Station tab under the row of icons
Enter a device name for the AirPort Express
Enter a device password for the AirPort Express
Verify the device password
Adjust the Time Zone setting
No other adjustments are needed here
Click the Wireless tab below the icons
Set the Wireless Mode to Extend a Wireless Network
Click on the Wireless Network Name box and your AirPort Extreme network name should appear as a choice. Click to select that....or manually enter the exact name of the AirPort Extreme wireless network
Make sure that Wireless Security is set to use WPA2 Personal
Enter the wireless network password for the AirPort Extreme
Verify the wireless network password for the AirPort Extreme
Click Update at the lower right of the window and wait a full minute for the Express to restart. A green light on the Express at this point will be a very good sign that things are up and running correctly.
Your Mac will automatically select the AirPort with the best signal quality. If you have an iPhone or iPad, you may need to manually turn off the WiFi when you move the device near another AirPort, and then turn WiFi back on to get the iOS device to connect to the best signal.
Good luck, please post on your results with the method that you choose.

HT5022 How do i use my airport extreme to extend my wireless network, or make the signal stronger

I have a wireless modem/router and want to use my airport extreme to strengthen the signal throughout my house...how do i do that?

Plan to establish a permanent Ethernet cable connection from one of the available LAN <-> ports on your modem/router to the WAN "O" port on the AirPort Extreme. Locate the AirPort Exteme in a central location in the general area where more wireless coverage is desired.
Configure the AirPort Extreme using AirPort Utility to "create" a wireless network using the exact same wireless network name, same exact wireless security settings and same exact password that your modem/router uses.
Finally, the Extreme must be configured in Bridge Mode to operate correctly with the modem/router.
To get everything in the proper sequence on the network....once the Extreme is configured, power off the entire network for a few minutes. Then start the modem/router first and let it run a minute by itself. Then start the Exteme next the same way. Continue starting devices the same way until the entire network is back up.

I have a mid-2010 iMac and just purchased a 2TB TC, can't join existing wireless network with AC standard so attached to iMac via ethernet with TC wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. working fine with TM

I have a mid-2010 iMac and just purchased a 2TB TC, I just found out that it can't join existing wireless network with new AC standard so attached to iMac via ethernet with TC's wifi turned off. How do i access TC now? not showing up in disk utility or on desktop. It is working fine with TM. My cheeper seagate drives etc kept crashing, so i didnt trust cheeper back up options anymore. Connected those drives to TM via firewire and could see the drives and access them.
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc. I connect to the internet via airport only and it is pretty fast. Getting over 50mbs downloads and over 30mbs uploads. Plus everything in my home it connected to my fios router, airport express for music streaming, two apple tvs, vuezone camer system. I really didn't want to monkey around too much with my system. But are there other options to connect the new TC. Can't find info anywhere for this and called apple who gave me the info above. after hanging up, i see that i cant access my TC and I am wondering if i would have to reset it to turn wifi on again to make changes to the drive, turn off blinking light or repair it in disk utility if it should become corrupted.
For other with similar issues i did solve some other problems: when i connected it to my ethernet port on my iMac wifi stopped working. Found that I had to turn off the ethernet in the system>network screen, but then TM didn't see the TC so i restarted after changes and then it saw it.
Now a rant. I can't believe in this wireless age that Apple would make a product that cant join a wireless net work. The apple rep said i could return it and look for the previous TC that would join an existing wireless network. Are we going backwards?
Thanks!
lennydas

Ok... it is getting a bit clearer but there are still some questions.
I connect to the internet via airport only and it is pretty fast.
I was assuming airport in this statement in your first post meant the TC or the Express.. but I now realise we are still in the mass confusion stage where apple calls everything wireless an airport. So what you mean is the airport internal card of the computer??
Also, I didn't want to bridge TC with my new fios router that I paid 100 dollars for, to get N speed and also paying 10 dollars more a month for fast speed. I heard that bridging slows down everything and then there can be port issues with mail etc.
I think this is mistaken.
Putting the TC in bridge mode plugged into your FIOS will not slow the network.. nor will it cause mail or port issues.. in bridge the TC is just a fancy WAP and switch plus the network hard drive.
If the computer is close it will be faster than the FIOS.
You can run both wireless networks with different names.. so it is clear which is which. But you can also setup roaming so the computers themselves pick which is the best wireless.
I tried extending the wireless net work and tried joining wireless network, but the TC kept crashing and I had to keep resetting the TC. the Apple support person said these, extend wireless network and joint wireless network, are no longer a connection option with the new TC because of the new AC protocol.
Thanks again!
You cannot extend to a non-apple wireless router.
You cannot use join a wireless network because when you do the ethernet ports will be cut off.
But that has not changed.. I don't think Apple support is correct.. there has been no change with the AC model.. it is simply a fact that apple routers do not work in join wireless mode other than as a dumb client. The same applies to AC as to the earlier version.. but I have asked another person to check this.
Join in the express is the only apple router that still allows an ethernet connection.
For now you best use of the TC is bridged to the FIOS. Wireless you can sort out between several options.

How do i connect my MacBook Air to a Printer on my Wireless Network

How do i connect my MacBook Air to a Printer on my Wireless Network ? The printer is connected to a PC running Windows 7. That PC is connected to my Wireless Network. MacBook connects fine to Network, but can't find Printer.

Hi Kappy,
Thanks for your response. I followed your instructions (for Mac OS 10.6.7). It seemed to set up OK, but when I tried to print I kept getting the following Failure Message "Session Setup failed : NT_Status_Invalid_Parameter".
When I get the "Advanced Window" should I enter anything into the "Location" field ? Maybe I am not entering the correct Workgroup, Server or Sharename ? Is there a way to make sure all of that is correct ? I went on to the computer that the printer is connected to and verified all of that, but am not sure I looked in the right places.
When I print via my Home Network from another Windows 7 Computer to the same PC, it works fine. I just can't get it to Print from my MacBook Air.
I thought of using the IP Address. How do I find the IP address of the Computer that is connected to the Printer ? Is it what they call the IPv4 Address, or the IPv4 Default Gateway ?
Appreciate any help you can provide.

How do I use a wired computer on the wireless network?

I want to hardwire my desktop to my wireless router. I have a wireless adapter and my computers work fine on the wireless network. If I try to plug in the ethernet cable to the router and disable the wireless adapter, it doesn't work. The light lights up on the front of the router saying that the ethernet cable is plugged in and the 1394 network connection is enabled in the "network connections." However, I cannot ping the router when using the ethernet. On the desktop computer, I look in "view workgroup computers" and there are no computers listed there. On the back of the computer, there is a light that lights up when I insert the cable, so I know the computer has detected there is a cable plugged in there.
They way I set up my wireless network is by using XP's tool under network tasks called "set up a wireless network for a home or small office" (which is found in "My Network Places." I don't know how to combine a wireless network with a wired network. Please help me.
I am using WRT54G. We don't have broadband installed yet.

Correct…I would not mess w/ the bios. Do you have an extra cat5 cable long enough to plug into the back of your router to the back of your PC? Hopefully, it was not taken out when the wireless NIC was installed. Do you see a place to plug in the cable on the back of your PC? It looks like a phone connection jack/ modem, only bigger. If not, what kind of machine, OS (Win 2K, Win XP, etc).

Doing a Google Search on Iphone or Ipad chokes my wireless network!

Almost every time I do a google search in safari on my Iphone5 or Ipad2 (happened with ios 5&6), it chokes my wireless network. I am still connected, just not going anywhere. Found this article that said to change DNS entries to googles 8.8.8.8 or 8.8.8.4 but IT STILL CHOKES! Here is the article, describes the problem well. http://osxdaily.com/2012/09/27/iphone-5-wifi-problem-fix/
Help Brainiacs! I am yelling some very unladylike things upon each reboot (which solves the symptom but not the problem and leaves me vexed and mean.)
Any suggestions?
Lisa

Do you have the google app on your phone? if so i saw where somewhere else posted that if they had the google app open and not signed out of google in the app ( and not closed at the bottom, how you double tap the home button and close the apps ) then it would cause this issue also.

Remote can't find iTunes on mix wired/wireless network

I am trying to control music from a iMac running iTunes using the iPhone Remote app. I've previously done this successfully with a wireless only network (using the Airport Express wifi to join my existing wifi network etc).
However, since introducing D-Link Homeplugs into my network, I am unable to 'see' the iTunes library from the Remote app when I connect wirelessly to the airport express.
My hardware is configured as follows:-
*Netgear Router (wireless disabled) -> Homeplug power network -> iMac running iTunes*
And elsewhere on the Homeplug network, I have:
H*omeplug power network -> Airport Express [set up as wireless access point]*.
If I connect the Express to the iTunes machine directly - leaving the wireless access details the same - it all works fine. If I move the Airport Express and reconnect over the Homeplug network, the Remote fails to 'see' the library, although I can still send music over the network (using the iTunes interface on the iMac) to the remote speakers.
My network uses the router as a DHCP (range 192.168.0.x mask 255.255.255.0), Airport Express is connected to Homeplug ethernet with a static IP (in the same range) and provides wireless access (unsecured for now while i get this working). The iMac has a static IP (in the same range). If I swap the iMac for a PC (XP - using DHCP from the router for IP), I get the same result. If I use an iPhone network application to view the network (connected by the wifi access point on the AX) then I can see all the machines on my network as I would expect.
To reiterate, if I cable this network directly (either AX->iMac or AX->hub->iMac) then it works. As soon as I go AX->Homeplug power network->iMac then the Remote app loses sight of the library.
I wouldn't expect any firewall on the wired->wireless networks on my router (a Sky branded Netgear 934g). I also didn't think that the Homeplugs would block.
So does anyone have any ideas why the Remote application loses sight of my iTunes library when connecting via Airport Express cabled into a Homeplug ethernet network ?
Thanks for any help because I miss my music
cheers,
Tim

Hello,
This is the same for me. Impossible to find a solution after.
Can you help us.
Thank

Wireless network?

Similar Messages

Maybe you are looking for