Wireless NIC Cards to use with MiFi 2200

Hello All,
I've had some issues using the Linksys Wireless-G NIC cards for wireless data access on Windows computers.
Does anyone know if there are recommended wireless card brands that work best with the MiFi 2200? Thanks for your assistance.

There are two kinds of RFID tags: Active tags, which have a battery or other internal power source, and passive tags, which have no power source and work by reflecting the energy from an RFID scanner (basically). At the energy levels and distances used for WiFi location detection, passive tags will not return a detectable signal.
Take a look at http://www.aeroscout.com/ for more info on WiFi RFID tagging.

Similar Messages

Can I buy a new ipd that takes a sim card to use with my local carrier? They only sell the ipad 2.

Can I buy a new iPad that uses a sim card to use with my local carrier? They only offer the iPad 2 for sale.

A quick Google search shows Union Wireless is GSM. Buy the AT&T version (GSM) iPad. You don't have to purchase iPad 2. You can purchase the newer iPad from Apple or Best Buy, or even Walmart. In either case, you get a micro sim from Union Wireless, purchase a data plan and enjoy.........

WIRELESS NIC CARD for HP6126UK.

Hi I would like to know what WIRELESS NIC CARD for HP6126UK would be suitable, as i would like to connect to a wireless connection.

Hi:
The easiest thing to do is to purchase an external usb wireless adapter for your PC.
That way you don't have to be concerned with what will specifically work for your PC.
All external usb adapters should work.
Something like this:
http://www.amazon.co.uk/Linksys-Dual-Band-Wireless-N-Adapter-Antenna/dp/B0080K6OXO/ref=sr_1_1?ie=UTF...

How to set up set which NIC card to use for multicast?..

 I just downloaded Rolling Patch 1 for WLS6.0SP2.
 While reading the README file it says
 " ISSUE 42518: Provided a way to set which NIC card to use for multicast traffic
 Can anyone tell me how to set this?. on my WebApplication server it has two NIC
 cards and I want to use the NICcard which is being used to talk to internal network
 for multicast messages.
 One more thing,
 Can anyone one tell how to search for bugs (ISSUES) in weblogic. I am looking
 place where I enter ISSUE number and should get the detailed description of bug/issue
 etc..
 Thanks for helping,
 Nilesh


 Thanks Kumar, I'll try this.
 Does this -Dweblogic.interfaceAddress used only for multicast. Or this is also
 used to talk to AdminServer?.
 The other problem I am facing is when I restart the AdminServer in recovery mode
 it's not finding my WebApp servers, because my webapp servers are on public network
 and my admin (management) server is on private network.
 please look at http://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.management&item=1217&utag=
 , for more details about my problem.
 Thanks,
 Nilesh
 Kumar Allamraju <[email protected]> wrote:
 ><!doctype html public "-//w3c//dtd html 4.0 transitional//en">
 ><html>
 >You should be able to do it via console in 6.1
 > Not sure if it was added in 6.0
 >For 6.0 you can set this via command line
 > java -Dweblogic.interfaceAddress=<addr>
 >You need 6.0 SP2 RP1
 >--
 > Kumar
 >Nilesh Shah wrote:
 ><blockquote TYPE=CITE>I just downloaded Rolling Patch 1 for WLS6.0SP2.
 > While reading the README file it says
 > " ISSUE 42518: Provided a way to set which NIC card to use for multicast
 >traffic
 > "..
 >Can anyone tell me how to set this?. on my WebApplication server it
 >has two NIC
 > cards and I want to use the NICcard which is being used to talk to
 >internal network
 > for multicast messages.
 >One more thing,
 >Can anyone one tell how to search for bugs (ISSUES) in weblogic. I
 >am
 >looking
 > place where I enter ISSUE number and should get the detailed description
 >of bug/issue
 > etc..
 >Thanks for helping,
 >Nilesh</blockquote>
 ></html>
 >

Many of the times my Iphone 5s shows "No Service" in the specific network area, but if the same sim card is used with other mobiles in the same network area, it shows good network.. i did restore but still not working.. please help me..

My Iphone 5s shows "No Service" in the specific network area, but if the same sim card is used with other mobiles in the same network area, it shows good network.. i did restore,change sim card, reset all the settings but still not working... please help me..

Please do not double post a subject. Iphone 5S I answered your other thread.

What is a decent sound card to use with DJ Mixer Pro?

I'm having trouble finding a compatible external sound card to use with my Mac Mini. Specifically, I need one that supports surround sound to use with DJ Mixer Pro. I am currently unable to use the "Preview" function of the program during my sets to ensure proper blending from one track into another. I've gotten pretty good at working around it, but with the proper sound card I should be able to preview a track in the "rear" of the surround sound without disturbing the "front", which plays live to the crowd. Most information I can find on sound cards pertains to home theatre application, which I have no interest in. I also don't need anything too sophisticated as I use the program for local club performances instead of professional production. I would prefer something that connects through firewire to prevent any kind of delay, but most of these seem to be discontinued or expensive overkill, so I hope a USB 2.0 will suffice. Any help would be greatly appreciated!

http://www.digitaldjtips.com/2010/11/6-budget-dj-sound-cards/
Found this page, helped a lot

HT201209 can the same gift card be used with a differencet itunes account?

can the same gift card be used with a differencet itunes account?

No, a gift card can only be redeemed onto one account - it can then only be used to buy items for that account (it can't be used to gift content to another account).

Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is network

Many of the times my Iphone 3G 16GB shows "No Service" in the specific network area, but if the same sim card is used with other mobile handset in the same network area its shows full network, Is this a Iphone 3G Handset problem or is it a problem with network service provider for iphone in india with Airtel.

Try to reset Network setting thru (Setting/General/Reset/Reset Network Setting - after clicking on it the phone will ask to reboot)
According to my R&D I have experienced that one must reset the network each time when we r at home or in office or other places, the phone after resetting the network setting acquires the area specific network setting n works well, try it & if any other solution do let me known
Calling up customer care did not help me, they do keep us in a loop with the same old answeres that “Our technical team is working on it & WILL GET BACK TO u” leaving us with no solution at the end
Try what I suggest think to will help u

Capture cards to use with JMF....

Hello, I need to buy a video capture card to use with JMF in order to get a video signal and send it using a stream channel.
Somebody can help me and post a list of compatible capture cards with JMF?.
I think on buy a PINNACLE 500 PCI but i have read that it is incompatible with JMF.
Thanks.

Creative webcam live should work, most webcams will work... at least under Windows. I've 2 older creative webcams that work under Windows.
Not sure about Linux support though...
Ps. there's a Java Media Framework section of this forum, where all the JMF related questions should be posted.
regards,
Owen

Msi x99 gaming 9 ack does not detect capture card when using with xsplit

msi x99 gaming 9 ack does not detect capture card when using with xsplit
i install every but still it does not work.

Hi
It wasn't hard to find your motherboard version:
http://www.msi.com/support/mb/Z68AGD80_B3.html#down-bios
Since your BIOS is v20.1, it couldn't be G3
Apart from checking BIOS, you can only check motherboard or moth...

Device sharing (printer, hard drive) with MiFi 2200?

Is it possible to setup network shares using the MiFi 2200 using Windows XP Pro SP3? I've shared devices through a wired network before, but cannot seem to get it to work through the MiFi device.
The following thread makes me think I need a dedicated router for this to work -
http://community.vzw.com/vzw/board/message?board.id=Broadband_Netbook_MiFi_Devices_tmp&message.id=4159#M4159
Thank you.

Unfortunately this function is not available on this device. It is strictly for internet access rather than sharing network settings like on a printer. You will need a different type of network sharing system for this option. Hope this helps.

Did I buy the wrong wireless NIC card?

Hello all .... I have a small home network consisting of 3 laptops and 2 desktops ... They were all connected via a WRT54G router with the one desktop farthest away using a wmp11 wireless NIC ..... this particular desktop is approx 75 - 100 ft away from the router ... so far there's been no problems, but that one machine always showed EXCELLENT signal strength (when you'd over the cursor over the little wireless icon in the systray) ....
For some unexplained reason (cause I'm dumb) I decided to purchase a new router, I got the Linksys WRT160N ..... well the machine with the wmp11 wouldn't even boot up any more, let alone communicate with the router. So I ordered a new wireless NIC for it, a wmp600N...which I installed and now at least that machine boots! The machine does connect to my network, and appears to run on the internet fine, however my question is now whenever you check that machines wireless status, it always says signal strengt is "Poor" or "Very Poor". I see now (I don't know why I didn't notice it before) that there is yet another wireless NIC for that router, and am now wondering if I bought the wrong nic card. I'm just wondering why my signal went from always showing EXCELLENT to now showing POOR all the time.
When I first ordered this router off the Linksys site, I remember distinctly specify "RANGE" as one of my requirements, yet when I received it from Linksys the box was clearly marked it was NOT for range.... so I am sorta confused.

I guess I am just concerned as there seems to be so many networks (routers) around here, there is always 7 or 8 connections available on the list of avail networks and I am just concerned about that one machine connecting to the wrong router when it is booted up ....
when I was using the wrt54g, and it always showed "Excellent" and the others always showed poor to very poor (1 or 2 bars) ,,,,,,,
but now with the new router always showing just one or two bars as well on that one machine .... I worry that it may connect to the wrong thing sometime. This wouldn't be such a worry for me IF there were simply an option to set "Connect to this network ONLY" on the nic,
but there isn't, just a "Connect to preffered network IF in range" ..........
Not that it matters here is the whole reason I have these machines and routers on a network is because I am severely disabled with M.S. and getting up and down steps to all my familys machines isn't so easy, and that one machine about 75 feet from me is impossible. So I have them all networked thru the router, and I use a remote control program (called Radmin) to access the various machines from this one laptop.
I am starting to wonder if the fact that nothing will work when this router is on 20mhz bandwith at all, is indicative of some sort of problem with the router itself? That is funny as the wrt54g was 20mhz only I beleive, and it worked perfectly!

Service degradation with Mifi 2200/early termination fee

We use our Mifi to provide Internet access to my rural house that is about five miles from the nearest DSL connection. The Mifi replaced HughesNet in February 2011 -- and we've been very pleased with the service up until this month. We pretty consistently had about 2.85 - 3 Mbps download speeds. We have the 10GB plan.
On May 8 we noticed my previously decent connection is now worse than HughesNet. When we can connect and we can only connect one device at a time, it's very slow (0.06 Mbps download/0.09 Mbps upload according to Speedtest.net). We're well under our usage limit for the month.
We noticed some work going on at two local towers and waited it out.
Last Tuesday (May 22), since it appears the work on the towers is over and one of my neighbors said their Verizon cell phones were completely down for two days, I called Customer Service and worked with them and their script for two hours before the genuinely trying-to-be-helpful woman on the other end said she'd have to submit a ticket to technical support to have someone come out to my house. They would call me. I'm still waiting for that call.
Last night I took the mifi and my iPad about 25 miles down the road to see if maybe it was the mifi. On the side of the road, near a couple cell towers (don't know if they were Verizon), I was able to get 1.85 Mbps download speed. Not wonderful, but better than HughesNet on a good day.
Do I have any option to get any money back for service they are NOT providing?
Can I get any kind of break on the early termination fee if I have to cancel because Verizon is unable/unwilling to fix the problem with their tower? (I live in a sparsely populated area--so they don't have hundreds of customers screaming about it.)
What is the early termination fee for a Mifi 2200? (I've looked all over the website and am unable to find it).
Thanks for your advice.

Hello,
To answer your questions:
1. There are no options for a "refund" on your service.
2. Yes. Call them up and mention you wish to leave for service related reasons. VZW should be leniant and atleast offer you a discount if not cover the entire fee.
3. ETF $175.00 for these devices. The ETF is pro-rated for each month of service you used the device. I believe the ETF is reduced $10.00 per month.
Service related problems are hard to argue. Either the service is good enough in your area or it is not. Sometimes there is seasonal interferance that naturally goes away and comes back over time, its not always worth it to wait it out. Some users are successful with antennas and amplifiers to improve the signal strength. Conducting a site survey should give you some confidence in a decision to invest in that equiptment before you buy.
Site Survey:
http://3gstore.com/page/13_will_an_antenna_help_me.html

Video capture card to use with WebEx

Hi all,
could someone share a list of compatible video capture cards to use in a PC in a WebEx session?
The ideia is to use an external camera (instead of a web cam) to capture the video and I would like to know if this input will be sent as video (if WebEx will recognize the capture card as an input).
Thanks
Regards

thanks for the advice and links... I was having trouble making sense of barefoot.
I have heard that a card that works well for gaming will not necessarily work well for CAD based programs like Maya. can any one confirm or deny this? I can use the software for things like this but I am pretty low on the food chain when it comes to hardware issues.
It is possible I being too picky wanting an affordable card that:
a.) Has been tested successfully by Autodesk with Maya
and
b.)is available to be installed in a Mac Pro
....comments?

Can NI 6601 (PCI, 4-channel) card be used with Lookout 5.1?

I need a fast counter like NI 6601 PCI Card to work with Lookout 5.1. Is there any driver for this card? Any other computer card like this one can be used with Lookout?

No, the NI 6601 cannot be used with Lookout. The reason is because Lookout uses the the NI-DAQ OPC server to communicate with DAQ devices through virtual channels, but you cannot have a virtual channel for a counter. Therefore, counters (such as the 6601) cannot be used in DAQ OPC, and hence cannot be used in Lookout. The following KnowledgeBase discusses this topic:
http://digital.ni.com/public.nsf/websearch/505D2E9A1617B5F686256A1B00574777?OpenDocument
LabVIEW would be an excellent software option for counter applications using the PCI-6601.
Regards,
Jeff M.

Wireless NIC Cards to use with MiFi 2200

Similar Messages

Maybe you are looking for