Wireless NIC Realtek RTL8191SE not recognized in Fedora 12

I have a toshiba satellite U505 and it came with this wireless NIC, i cant navigate with this card using Fedora 12 because that OS doesn't recognize the wireless NIC, it seems that its because i need to install the proper Driver, but i havent find the one for this wireless NIC.

I have a Satellite U505-S2005. The wireless antenna does not work. When I ask the search for available wireless networks a message to turn the key (switch) of wireless, but it was already on and he did not recognize it. Can someone help me? I use win 7
[email protected] Thanks.

Similar Messages

Wireless mouse and keyboard not recognized

I know that I have had this issue before, but can't remember what the solution is (old age?) My iMac G5 PPC has a wireless mouse and keyboard (the old apple white one). The iMac came with these as an option but WITHOUT the bluetooth card inside. (I still don't know how this works, but it does). Anyway, the mouse and keyboard were not recognized when I tried to get on today. The batteries are good. If I go to system prefs (using an even older wired mouse) there is no bluetooth option (since no card is present). I don't know how to get the computer to try to recognize both. Any help is definitely appreciated.

HI David,
If the iMac didn't come with Bluetooth software/hardware, then are you using a USB Bluetooth dongle?
And open System Profile (Applications/Utilities)
Select Bluetooth on the left under Hardware. You may need to click the gray disclosure triangle so it faces down. What does it say on the right?
If the Bluetooth icon is in your Status Menu Bar (top right in your screen). Click the icon and make sure Bluetooth is turned on. Then click: Open Bluetooth Preferences and try re-pairing the mouse and keyboard.
Carolyn

Second NIC card (eth1) not recognized

Hello,
I have two NIC cards setup. Linux is recognizing only one nic card as eth0 but not recognzing the second one. Any help is greatly appreciated. I am using Redhat Linux Enterprise ES 3.0
Thank you in advance

Thank you and here is the output:
lsmod:
Module Size Used by Not tainted
parport_pc 19076 1 (autoclean)
lp 9028 0 (autoclean)
parport 37088 1 (autoclean) [parport_pc lp]
autofs 13364 0 (autoclean) (unused)
tulip 43584 1
crc32 3712 0 [tulip]
sg 36940 0 (autoclean)
sr_mod 18104 0 (autoclean)
floppy 58160 0 (autoclean)
microcode 4724 0 (autoclean)
ide-scsi 12208 0
ide-cd 35680 0
cdrom 33696 0 [sr_mod ide-cd]
keybdev 2976 0 (unused)
mousedev 5524 1
hid 22212 0 (unused)
input 5888 0 [keybdev mousedev hid]
ehci-hcd 20104 0 (unused)
usb-uhci 26412 0 (unused)
usbcore 79392 1 [hid ehci-hcd usb-uhci]
ext3 91592 2
jbd 52336 2 [ext3]
ata_piix 4100 3
libata 27780 0 [ata_piix]
sd_mod 13744 6
scsi_mod 108840 5 [sg sr_mod ide-scsi ata_piix libata sd_mod]
lspci:
00:00.0 Host bridge: Intel Corp.: Unknown device 2580 (rev 04)
00:01.0 PCI bridge: Intel Corp.: Unknown device 2581 (rev 04)
00:1c.0 PCI bridge: Intel Corp.: Unknown device 2660 (rev 03)
00:1d.0 USB Controller: Intel Corp.: Unknown device 2658 (rev 03)
00:1d.1 USB Controller: Intel Corp.: Unknown device 2659 (rev 03)
00:1d.2 USB Controller: Intel Corp.: Unknown device 265a (rev 03)
00:1d.3 USB Controller: Intel Corp.: Unknown device 265b (rev 03)
00:1d.7 USB Controller: Intel Corp.: Unknown device 265c (rev 03)
00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB PCI Bridge (rev d3)
00:1f.0 ISA bridge: Intel Corp.: Unknown device 2640 (rev 03)
00:1f.1 IDE interface: Intel Corp.: Unknown device 266f (rev 03)
00:1f.2 IDE interface: Intel Corp.: Unknown device 2651 (rev 03)
00:1f.3 SMBus: Intel Corp.: Unknown device 266a (rev 03)
01:00.0 VGA compatible controller: ATI Technologies Inc: Unknown device 5b60
01:00.1 Display controller: ATI Technologies Inc: Unknown device 5b70
03:00.0 Ethernet controller: Linksys Network Everywhere Fast Ethernet 10/100 model NC100 (rev 11)
03:01.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 46)
03:08.0 Ethernet controller: Intel Corp.: Unknown device 1064 (rev 03)

Satellite Pro L450 - Realtek RTL8191SE WLAN adapter: Limited Access

Hi
Hoping you can help me with my issue with wifi connection.
OS: Windows 7
Wireless adapter: Realtek RTL8191SE Wireless LAN adapter
Laptop: Toshiba Satellite Pro L450
Wireless router/modem: Cisco
When I turn the laptop on the wifi connection may work for 10-30mins but then the network access drops but remains connected with Limited Access.
Then on reboot the connection will have Limited Access from the offset.
Also, sometimes the Available Wireless Connections do not show in the Available Networks on windows toolbar.
When using the Ethernet cable connected to my router there are no problems.
I have been searching forums for help on this and have already tried the following without success,
Updated driver: issue date May 2010
Checked that TCP/IP was set to get IP and DNS automatically
Turned off firewall
Reset modem
Countless reboots of both modem and laptop
The wireless router/modem works perfectly as I can connect with other devices and laptops.
Is this a problem that is seen regularly with this combination of laptop/wireless card/OS?
Would really appreciate any guidance you can give me as this is getting very frustrating.
Thanks
Kieran

Tonny, updated BIOS and still no joy. Have given up on this! Just to let ye know I bought an external usb wifi adaptor and it works great.Have to say I am very annoyed that Toshiba would sell a laptop where the wifi card is not compatible with the OS or conflicts in some other way. If anyone is interested this is the adapter I bought (http://www.play.com/PC/PCs/4-/11514859/Laptone-WiFi-Wireless-N-USB-Adapter/Product.html?ob=Price&fb=0&cur=258) and works perfectly with Windows 7, getting similar speeds to a direct connection and only cost me 10. Should not have had to go down this road but its a lesson learned, no more Toshiba!
Message was edited by: brehenyk - edited URL

Windows 8 and Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC

Hi!
I hava a Toshiba L650 - 107 PSKI JE and I am having a problem with the my wireless network adapter on windows 8.
My network adapter is Realtek RTL8191SE Wireless LAN 802.11n PCI-E NIC and works fine on windows 7. Two days ago I formatted my hard drive and install windows 8. The problem is that for much drivers I keep installing, The wireless keep turned off. There's no way I can move the slide from off to on.
I already tried a lot of drivers from toshiba and from realtek but doesn't work.
I went to see the Network Connections (Control Panel > Network and Internet > Network Connections) and the Ethernet is fine, I connect a cable and it is fine, but wi-fi says "Not connected".
How do I solve this problem?

Satellite L650-107 (PSK1JE-00P003EP)
Downloads here.
A computer from Portugal? (Specifications attached.)
This driver should work on Windows 8.
Realtek Wireless LAN Driver
But your problems may be more fundamental. Prior to loading Toshiba-specific programs, you probably need to install something like this.
Toshiba System Driver - Windows 8 beta
And for the function keys to work, you'll need still another Toshiba utility.
-Jerry
Attachments:
satellite_l650.pdf ‏3264 KB

ITunes not recognizing iPad or iPhone via wireless

I've been noticing that since the last iTunes update iTunes won't recognize my iPad or iPhone via my wireless connection when I launch iTunes. I have to manually plug each one in to sync, and this has been getting progressively worse over the last few weeks.
At first it was only sometimes, then it was just the iPhone, then it was just the iPad, then it would alternate between the two, and now it won't recognize either.
Do I have something off in my settings, or is this a bug in the new iTunes system?
Anyone else experiencing the same thing?

Hey jzzlvr57,
Thanks for the question. After reviewing your post, it sounds like the device isn't showing up in iTunes. I would recommend that you read one of these articles, they may be able to help you resolve or isolate the issue.
iOS: Device not recognized in iTunes for Windows
http://support.apple.com/kb/TS1538
iOS: Device not recognized in iTunes for OS X
http://support.apple.com/kb/TS1591?viewlocale=en_US
USB and FireWire Quick Assist
http://support.apple.com/kb/HT1151
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Not recognizing wireless keyboard/trackpad/mouse

Just installed windows 7 on new 2012 imac. loaded the support software. still not recognizing the mac's wireless keyboard, trackpad, or mouse. what should I try??

hi
the N70 mouse has a USB dongle to connect to
Spoiler (Highlight to read)
You may be able to connect the mouse but the Keyboard should be a pair SK8861
The SK8861 mouse and keyboard should be a pair because the USB dongle for both is in the SK8861 mouse.
Im not sure If you can pair the SK8861 keyboard with the n70 USB dongle.
But here's how to pair the keyboard. you can try this out with the N70 usb dongle.
Make sure that the keyboard is very close to the dongle when pairing
1. Unplug the dongle from the computer
2. Remove the battery
3. Hold the F2 F3 and F4 keys on the keyboard all throughout the process
4. Use your left had put the battery in but do not put the keyboard battery cover yet.
5. Left hand still, plug in the USB dongle then right away put the keyboard battery cover
Light will blink but once it stopped you can now let go of the F2 F3 and F4 keys and try the keyboard out.
If this does not work You might need to conatct where you bought it and ask about the keyboard and mouse, that it should come in pair" sk8861 mouse and keyboard.
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Time capsule works as wireless router, but intermittently stops backing up because it is not recognized

So here is the scenario. I just purchased a new 2T Time Capsule about a month ago. At some point, about a week ago it stopped working correctly. A few things that I've noticed:
1. The wireless router works just fine.
2. Every once in a while (more often than not) my computer (Mac book pro) will not recognize the time capsule and it will therefore not do it's wireless backup. I can no longer use it to store data.
3. What works? Unplugging the time capsule for about 20 seconds and then reconnecting seems to fix the problem, but will then the same problem will recur spontaneously.
4. Sometimes, I'll restart my computer and that will fix the problem, but again time capsule will drop off from the shared devices.
5. Interestingly, when TC is not recognized by my mac book, the Home Sharing feature of Apple TV also is rendered non-functional.
Any ideas? is it a hardware issue? If so, is it my Mac book or my TC or both?
Thanks for your advice in advance

I have seen a few posts on this one and the issue is very likely to be the way Auto channel changes take place.. for some unknown reason, the wireless can still connect as a router but the arp address is lost in the ARP table on the computer. So open a terminal and type arp -a soon after a TC restart when TM can see it.. you will see the TC MAC address listed. Once the TC is no longer recognised again do arp -a and you will find the TC is no longer listed. It is possible to force a static listing to the ARP table, but it seems to be much easier and better to simply lock the wireless channel.
Using the airport utility go to the TC setup and open the wireless area. Airport on the top menu.. wireless on the tab under that. where it says radio channel selection change to manual.. give it a fixed channel, for 2.4ghz it is best to pick the least used channel and you will need to use some site survey software to do this.. kismet, inssider for pc is superior to most Mac utilities at the moment. There are only 3 non overlapping channels 1, 6, 11 (12,13 outside USA). Pick one. I would also give a separate name to 5ghz wireless so it doesn't switch between the two.. that means you will have to change manually if signal drops out as it does more readily on 5ghz. The locking of channels seems to help the Mac not lose the MAC address in arp..though the actual mechanism is unknown to me.

[mostly solved]RaLink RT2860 wireless NIC not working, in eeePC 1000HE

I'm having trouble getting my wireless NIC to work.
I have a clean, up-to-date system, no [testing]. I'm using the stock kernel, 2.6.30, which according to the 1000HE wiki (http://wiki.archlinux.org/index.php/Asu … 000HE#WiFi), is supposed to work out of the box.
The problem I run into with iwconfig is that it doesn't set an essid. The essid shows as blank, then I run:
iwconfig ra0 essid "my id"
and iwconfig ra0 again shows a blank essid.
I've tried wpa_supplicant, and it just spams CTRL-EVENT-SCAN-RESULTS indefinitely (my config file is attached).
I've tried wifi radar, and it gives me errors about the network I'm trying to connect to having no AP address.
I've only tried to connect to the one network here that I have access to. It's an unsecured university network with many APs (I think it's called roaming or something?). Once you have an IP leased, you try to go to a website and are automatically forwarded to an authentication login page.
I've attached the output from a bunch of different commands:
ifconfig -a:
eth0 Link encap:Ethernet HWaddr 00:26:18:40:58:85
BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:17
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
ra0 Link encap:Ethernet HWaddr 00:25:D3:13:D2:4E
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:99 errors:0 dropped:0 overruns:0 frame:0
TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13066 (12.7 Kb) TX bytes:0 (0.0 b)
Interrupt:19
iwconfig:
ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA"
Mode:Auto Frequency=2.412 GHz Bit Rate=1 Mb/s
RTS thr:off Fragment thr:off
Encryption key:off
Link Quality=10/100 Signal level:0 dBm Noise level:-97 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
iwconfig ra0 essid "hi": returns no output
afterward, iwconfig returns identical output as above
iwlist ra0 scan:
ra0 Scan completed :
Cell 01 - Address: 00:0C:E6:40:7E:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:65/100 Signal level:-64 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 02 - Address: 00:0C:E6:40:7E:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:65/100 Signal level:-64 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 03 - Address: 00:0C:E6:40:76:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:24/100 Signal level:-80 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 04 - Address: 00:0C:E6:40:76:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:34/100 Signal level:-76 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 05 - Address: 00:0C:E6:40:88:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:60/100 Signal level:-66 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 06 - Address: 00:0C:E6:40:7B:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 07 - Address: 00:0C:E6:40:97:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 08 - Address: 00:0C:E6:40:75:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:39/100 Signal level:-74 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 09 - Address: 00:0C:E6:40:88:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:65/100 Signal level:-64 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 10 - Address: 00:0C:E6:40:7B:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 11 - Address: 00:0C:E6:40:75:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:44/100 Signal level:-72 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
Cell 12 - Address: 00:0C:E6:40:8D:00
ESSID:"UM Wireless Network"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:off
Bit Rates:54 Mb/s
Cell 13 - Address: 00:0C:E6:40:8D:01
ESSID:"MWireless"
Mode:Managed
Channel:11
Quality:20/100 Signal level:-82 dBm Noise level:-97 dBm
Encryption key:on
Bit Rates:54 Mb/s
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : 802.1x
iwpriv:
ra0 Available private ioctls :
set (8BE2) : set 1024 char & get 0
connStatus (0004) : set 0 & get 2047 char
driverVer (0005) : set 0 & get 2047 char
bainfo (0006) : set 0 & get 2047 char
descinfo (0007) : set 0 & get 2047 char
radio_off (000A) : set 0 & get 2047 char
radio_on (000B) : set 0 & get 2047 char
show (0014) : set 1024 char & get 2047 char
bbp (8BE3) : set 2047 char & get 2047 char
mac (8BE5) : set 1024 char & get 1024 char
e2p (8BE7) : set 1024 char & get 1024 char
stat (8BE9) : set 0 & get 2047 char
get_site_survey (8BED) : set 0 & get 1024 char
lspci:
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 02)
00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA AHCI Controller (rev 02)
01:00.0 Network controller: RaLink RT2860
03:00.0 Ethernet controller: Attansic Technology Corp. L1e Gigabit Ethernet Adapter (rev b0)
wpa_supplicant -Dwext -ira0 -c/etc/wpa_supplicant.conf:
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-SCAN-RESULTS
CTRL-EVENT-TERMINATING - signal 2 received
cat /etc/wpa_supplicant.conf:
# Catch all example that allows more or less all configuration modes
network={
ssid="UM Wireless Network"
scan_ssid=1
key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE
pairwise=CCMP TKIP
group=CCMP TKIP WEP104 WEP40
psk="very secret passphrase"
eap=TTLS PEAP TLS
identity="[email protected]"
password="foobar"
ca_cert="/etc/cert/ca.pem"
client_cert="/etc/cert/user.pem"
private_key="/etc/cert/user.prv"
private_key_passwd="password"
phase1="peaplabel=0"
dmesg: (This was run after all the other commands. I ran the wpa_supplicant command a couple of times, so the tail of the output is the result of a few different attempts by wpa_supplicant to find a network.)
Linux version 2.6.30-ARCH (root@arch) (gcc version 4.4.0 20090630 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Jul 4 11:13:08 UTC 2009
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
NSC Geode by NSC
Cyrix CyrixInstead
Centaur CentaurHauls
Transmeta GenuineTMx86
Transmeta TransmetaCPU
UMC UMC UMC UMC
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000007f7a0000 (usable)
BIOS-e820: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
BIOS-e820: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
BIOS-e820: 000000007f7f0000 - 000000007f800000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
DMI present.
AMI BIOS detected: BIOS may corrupt low RAM, working around it.
e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
last_pfn = 0x7f7a0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-DFFFF uncachable
E0000-EFFFF write-through
F0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask 080000000 write-back
1 base 07F800000 mask 0FF800000 uncachable
2 disabled
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
Scanning 0 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009fc00 (usable)
modified: 000000000009fc00 - 00000000000a0000 (reserved)
modified: 00000000000e2000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000007f7a0000 (usable)
modified: 000000007f7a0000 - 000000007f7ae000 (ACPI data)
modified: 000000007f7ae000 - 000000007f7f0000 (ACPI NVS)
modified: 000000007f7f0000 - 000000007f800000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000fff80000 - 0000000100000000 (reserved)
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 10000-15000
RAMDISK: 7f6fc000 - 7f78fe11
Allocated new RAMDISK: 00628000 - 006bbe11
Move RAMDISK from 000000007f6fc000 - 000000007f78fe10 to 00628000 - 006bbe10
ACPI: RSDP 000fb9d0 00014 (v00 ACPIAM)
ACPI: RSDT 7f7a0000 0003C (v01 A_M_I_ OEMRSDT 04000920 MSFT 00000097)
ACPI: FACP 7f7a0200 00084 (v02 A_M_I_ OEMFACP 04000920 MSFT 00000097)
ACPI: DSDT 7f7a0430 05D8C (v01 A1192 A1192000 00000000 INTL 20051117)
ACPI: FACS 7f7ae000 00040
ACPI: APIC 7f7a0390 0005C (v01 A_M_I_ OEMAPIC 04000920 MSFT 00000097)
ACPI: MCFG 7f7a03f0 0003C (v01 A_M_I_ OEMMCFG 04000920 MSFT 00000097)
ACPI: OEMB 7f7ae040 00061 (v01 A_M_I_ AMI_OEM 04000920 MSFT 00000097)
ACPI: HPET 7f7a61c0 00038 (v01 A_M_I_ OEMHPET 04000920 MSFT 00000097)
ACPI: SSDT 7f7aeb40 004F0 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
1151MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
node 0 low ram: 00000000 - 377fe000
node 0 bootmap 00011000 - 00017f00
(9 early reservations) ==> bootmem [0000000000 - 00377fe000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
#2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
#3 [0000100000 - 0000624e44] TEXT DATA BSS ==> [0000100000 - 0000624e44]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0000625000 - 00006271e0] BRK ==> [0000625000 - 00006271e0]
#6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
#7 [0000628000 - 00006bbe11] NEW RAMDISK ==> [0000628000 - 00006bbe11]
#8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
found SMP MP-table at [c00ff780] ff780
Zone PFN ranges:
DMA 0x00000010 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0007f7a0
Movable zone start PFN for each node
early_node_map[2] active PFN ranges
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0007f7a0
On node 0 totalpages: 522031
free_area_init_node: node 0, pgdat c04c1380, node_mem_map c1000200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3951 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 2304 pages used for memmap
HighMem zone: 292514 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0xffffffff base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e2000
PM: Registered nosave memory: 00000000000e2000 - 0000000000100000
Allocating PCI resources starting at 80000000 (gap: 7f800000:7f600000)
NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 11 pages at c1ffa000, static data 24444 bytes
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 517951
Kernel command line: root=/dev/disk/by-uuid/2debd498-3ab0-459c-afbe-d75860e0d650 ro
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
NR_IRQS:512
PID hash table entries: 4096 (order: 12, 16384 bytes)
Fast TSC calibration using PIT
Detected 1662.281 MHz processor.
Console: colour VGA+ 80x25
console [tty0] enabled
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Initializing HighMem for node 0 (000377fe:0007f7a0)
Memory: 2064176k/2088576k available (2902k kernel code, 23140k reserved, 1047k data, 392k init, 1179272k highmem)
virtual kernel memory layout:
fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc04e1000 - 0xc0543000 ( 392 kB)
.data : 0xc03d590f - 0xc04db6a8 (1047 kB)
.text : 0xc0100000 - 0xc03d590f (2902 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
Calibrating delay loop (skipped), value calculated using timer frequency.. 3325.08 BogoMIPS (lpj=5540936)
Security Framework initialized
Mount-cache hash table entries: 512
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
using mwait in idle threads.
Checking 'hlt' instruction... OK.
ACPI: Core revision 20090320
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
Booting processor 1 APIC 0x1 ip 0x6000
Initializing CPU#1
Calibrating delay using timer specific routine.. 3326.54 BogoMIPS (lpj=5541676)
CPU: L1 I cache: 32K, L1 D cache: 24K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#1.
x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
CPU1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
checking TSC synchronization [CPU#0 -> CPU#1]: passed.
Brought up 2 CPUs
Total of 2 processors activated (6652.63 BogoMIPS).
CPU0 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 0 1
CPU1 attaching sched-domain:
domain 0: span 0-1 level SIBLING
groups: 1 0
net_namespace: 1056 bytes
Booting paravirtualized kernel on bare hardware
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: Not using MMCONFIG.
PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 63
PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: EC: driver started in poll mode
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (0000:00)
pci 0000:00:02.0: reg 10 32bit mmio: [0xf7f00000-0xf7f7ffff]
pci 0000:00:02.0: reg 14 io port: [0xdc00-0xdc07]
pci 0000:00:02.0: reg 18 32bit mmio: [0xd0000000-0xdfffffff]
pci 0000:00:02.0: reg 1c 32bit mmio: [0xf7ec0000-0xf7efffff]
pci 0000:00:02.1: reg 10 32bit mmio: [0xf7f80000-0xf7ffffff]
pci 0000:00:1b.0: reg 10 64bit mmio: [0xf7eb8000-0xf7ebbfff]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1d.0: reg 20 io port: [0xd400-0xd41f]
pci 0000:00:1d.1: reg 20 io port: [0xd480-0xd49f]
pci 0000:00:1d.2: reg 20 io port: [0xd800-0xd81f]
pci 0000:00:1d.3: reg 20 io port: [0xd880-0xd89f]
pci 0000:00:1d.7: reg 10 32bit mmio: [0xf7eb7c00-0xf7eb7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: region 0480-04bf claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0380 (mask 0003)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0290 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0003)
pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
pci 0000:00:1f.1: reg 18 io port: [0x8f0-0x8f7]
pci 0000:00:1f.1: reg 1c io port: [0x8f8-0x8fb]
pci 0000:00:1f.1: reg 20 io port: [0xffa0-0xffaf]
pci 0000:00:1f.2: reg 10 io port: [0xd080-0xd087]
pci 0000:00:1f.2: reg 14 io port: [0xd000-0xd003]
pci 0000:00:1f.2: reg 18 io port: [0xcc00-0xcc07]
pci 0000:00:1f.2: reg 1c io port: [0xc880-0xc883]
pci 0000:00:1f.2: reg 20 io port: [0xc800-0xc80f]
pci 0000:00:1f.2: reg 24 32bit mmio: [0xf7eb7800-0xf7eb7bff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:03:00.0: reg 10 64bit mmio: [0xfbfc0000-0xfbffffff]
pci 0000:03:00.0: reg 18 io port: [0xec00-0xec7f]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:03:00.0: PME# disabled
pci 0000:00:1c.1: bridge io port: [0xe000-0xefff]
pci 0000:00:1c.1: bridge 32bit mmio: [0xfbf00000-0xfbffffff]
pci 0000:01:00.0: reg 10 32bit mmio: [0xfbef0000-0xfbefffff]
pci 0000:01:00.0: PME# supported from D0 D3hot
pci 0000:01:00.0: PME# disabled
pci 0000:00:1c.3: bridge 32bit mmio: [0xf8000000-0xfbefffff]
pci 0000:00:1c.3: bridge 64bit mmio pref: [0xf0000000-0xf6ffffff]
pci 0000:00:1e.0: transparent bridge
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P5._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12 14 *15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 11 12 14 15)
PCI: Using ACPI for IRQ routing
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 13 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved
system 00:08: ioport range 0x25c-0x25f has been reserved
system 00:08: ioport range 0x380-0x383 has been reserved
system 00:08: ioport range 0x400-0x41f has been reserved
system 00:08: ioport range 0x4d0-0x4d1 has been reserved
system 00:08: ioport range 0x800-0x87f has been reserved
system 00:08: ioport range 0x480-0x4bf has been reserved
system 00:08: iomem range 0x8c000000-0x8c01ffff has been reserved
system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved
system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved
system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved
system 00:08: iomem range 0xffb00000-0xffbfffff has been reserved
system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved
system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved
system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
system 00:0b: iomem range 0xe0000000-0xe3ffffff has been reserved
system 00:0c: iomem range 0x0-0x9ffff could not be reserved
system 00:0c: iomem range 0xc0000-0xcffff could not be reserved
system 00:0c: iomem range 0xe0000-0xfffff could not be reserved
system 00:0c: iomem range 0x100000-0x7f7fffff could not be reserved
pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
pci 0000:00:1c.0: IO window: disabled
pci 0000:00:1c.0: MEM window: disabled
pci 0000:00:1c.0: PREFETCH window: disabled
pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
pci 0000:00:1c.1: IO window: 0xe000-0xefff
pci 0000:00:1c.1: MEM window: 0xfbf00000-0xfbffffff
pci 0000:00:1c.1: PREFETCH window: disabled
pci 0000:00:1c.3: PCI bridge, secondary bus 0000:01
pci 0000:00:1c.3: IO window: disabled
pci 0000:00:1c.3: MEM window: 0xf8000000-0xfbefffff
pci 0000:00:1c.3: PREFETCH window: 0x000000f0000000-0x000000f6ffffff
pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
pci 0000:00:1e.0: IO window: disabled
pci 0000:00:1e.0: MEM window: disabled
pci 0000:00:1e.0: PREFETCH window: disabled
pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 io: [0x00-0xffff]
pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
pci_bus 0000:03: resource 0 io: [0xe000-0xefff]
pci_bus 0000:03: resource 1 mem: [0xfbf00000-0xfbffffff]
pci_bus 0000:01: resource 1 mem: [0xf8000000-0xfbefffff]
pci_bus 0000:01: resource 2 pref mem [0xf0000000-0xf6ffffff]
pci_bus 0000:05: resource 3 io: [0x00-0xffff]
pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
NET: Registered protocol family 1
Unpacking initramfs...
Freeing initrd memory: 591k freed
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: disabled - APM is not SMP safe.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1247582678.410:1): initialized
highmem bounce pool size: 64 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1731
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci 0000:00:02.0: Boot video device
pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
pcieport-driver 0000:00:1c.0: setting latency timer to 64
pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
pcieport-driver 0000:00:1c.1: setting latency timer to 64
pcieport-driver 0000:00:1c.3: irq 26 for MSI/MSI-X
pcieport-driver 0000:00:1c.3: setting latency timer to 64
isapnp: Scanning for PnP cards...
Switched to high resolution mode on CPU 1
Switched to high resolution mode on CPU 0
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
input: Macintosh mouse button emulation as /devices/virtual/input/input0
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Using IPI No-Shortcut mode
registered taskstats version 1
Initalizing network drop monitor service
Freeing unused kernel memory: 392k freed
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0xf7eb7800 port 0xf7eb7900 irq 27
ata2: DUMMY
ata3: SATA max UDMA/133 abar m1024@0xf7eb7800 port 0xf7eb7a00 irq 27
ata4: DUMMY
pata_acpi 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
pata_acpi 0000:00:1f.1: setting latency timer to 64
pata_acpi 0000:00:1f.1: PCI INT A disabled
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: ATA-8: Hitachi HTS543216L9SA00, FB2OC40C, max UDMA/133
ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA Hitachi HTS54321 FB2O PQ: 0 ANSI: 5
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi4 : ata_piix
scsi5 : ata_piix
ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
Driver 'sd' needs updating - please use bus_type methods
sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors: (160 GB/149 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4
sd 0:0:0:0: [sda] Attached SCSI disk
ata6: port disabled. ignoring.
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with writeback data mode.
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, 114 bytes nvram, hpet irqs
udev: starting version 141
ACPI: AC Adapter [AC0] (on-line)
ACPI: EC: non-query interrupt received, switching to interrupt mode
ACPI: Battery Slot [BAT0] (battery present)
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
ACPI: Lid Switch [LID]
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
ACPI: Sleep Button [SLPB]
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
ACPI: SSDT 7f7ae180 001FA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 7f7ae410 00724 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Marking TSC unstable due to TSC halts in idle
ACPI: CPU0 (power states: C1[C1] C2[C2])
processor ACPI_CPU:00: registered as cooling_device0
ACPI: Processor [P001] (supports 8 throttling states)
ACPI: SSDT 7f7ae0b0 000CC (v01 PmRef Cpu1Ist 00003000 INTL 20051117)
ACPI: SSDT 7f7ae380 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20051117)
ACPI: CPU1 (power states: C1[C1] C2[C2])
processor ACPI_CPU:01: registered as cooling_device1
ACPI: Processor [P002] (supports 8 throttling states)
thermal LNXTHERM:01: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (42 C)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
Linux agpgart interface v0.103
intel_rng: FWH not detected
usbcore: registered new device driver usb
input: PC Speaker as /devices/platform/pcspkr/input/input6
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:19/input/input7
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
rt2860sta: module is from the staging directory, the quality is unknown, you have been warned.
rt2860 0000:01:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
=== pAd = f8591000, size = 580808 ===
<-- RTMPAllocAdapterBlock, Status=0
rt2860 0000:01:00.0: setting latency timer to 64
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf7eb7c00
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ATL1E 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
ATL1E 0000:03:00.0: setting latency timer to 64
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d400
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d480
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d800
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.3: setting latency timer to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d880
usb usb5: configuration #1 chosen from 1 choice
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
sd 0:0:0:0: Attached scsi generic sg0 type 0
agpgart-intel 0000:00:00.0: Intel 945GME Chipset
agpgart-intel 0000:00:00.0: detected 7932K stolen memory
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
iTCO_vendor_support: vendor-support=0
eeepc: Eee PC Hotkey Driver
eeepc: Hotkey init flags 0x41
eeepc: Get control methods supported: 0x101713
input: Asus EeePC extra buttons as /devices/virtual/input/input8
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.05
iTCO_wdt: Found a ICH7-M or ICH7-U TCO device (Version=2, TCOBASE=0x0860)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
usb 1-8: new high speed USB device using ehci_hcd and address 3
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
HDA Intel 0000:00:1b.0: setting latency timer to 64
psmouse serio1: ID: 10 00 64
usb 1-8: configuration #1 chosen from 1 choice
elantech.c: assuming hardware version 2, firmware version 2.48
usb 5-1: new full speed USB device using uhci_hcd and address 2
elantech.c: Synaptics capabilities query result 0x00, 0x02, 0x64.
usb 5-1: configuration #1 chosen from 1 choice
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input9
Linux video capture interface: v2.00
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input10
uvcvideo: Found UVC 1.00 device CNF7129 (04f2:b071)
input: CNF7129 as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input11
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: Generic Bluetooth USB driver ver 0.5
usbcore: registered new interface driver btusb
EXT3 FS on sda3, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda4, internal journal
EXT3-fs: mounted filesystem with writeback data mode.
Adding 1052248k swap on /dev/sda2. Priority:-1 extents:1 across:1052248k
RX DESC f649f000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
RTMPSetPhyMode: channel is out of range, use first channel=1
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1336
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1375
===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1641
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1470
===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1641
===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1641
RX DESC f649f000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
RX DESC f73ce000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1431
===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 1240
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1619
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1619
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1588
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1619
===>rt_ioctl_giwscan. 16(16) BSS returned, data->length = 1714
===>rt_ioctl_giwscan. 17(17) BSS returned, data->length = 1779
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1409
===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 1240
RX DESC f6948000 size = 2048
<-- RTMPAllocTxRxRingMemory, Status=0
--> Error 2 opening /etc/Wireless/RT2860STA/RT2860STA.dat
1. Phy Mode = 0
2. Phy Mode = 0
3. Phy Mode = 0
MCS Set = 00 00 00 00 00
<==== RTMPInitialize, Status=0
0x1300 = 00073200
===>rt_ioctl_giwscan. 12(12) BSS returned, data->length = 1240
===>rt_ioctl_giwscan. 10(10) BSS returned, data->length = 1070
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1355
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1546
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1316
===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1355
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1470
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1470
===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1165
===>rt_ioctl_giwscan. 11(11) BSS returned, data->length = 1145
===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 1504
===>rt_ioctl_giwscan. 15(15) BSS returned, data->length = 1546
Last edited by mishchea (2009-07-15 02:42:39)

Malstrond wrote:Mostly because Ralink just hacks their drivers together to work somehow. A module should never require files in /etc/, but they don't care. The file contains settings, ranging from packet thresholds to country selection. There is a readme file in the archive, you can change some interesting things in there, i.e. auto roaming.
The staging drivers included in the kernel have this settings file included in the module, but there have been problems with this in 2.6.30, among others, the included drivers for RT2870-based hardware, for example, can render your system unusable.
Sadly, there doesn't seem to be much effort on the side of Linux community either. Maybe it's because all the devs interested in this already bought one of earlier EEEs with an Atheros chipset.
I've got one of these cards and it works fine. I'm running 2.6.31.
I use a wpa_supplicant based connection. I suggest that you do the same, the config file is crap and it doesn't appear to accept iwconfig input.
For netcfg and this card, try netcfg 2.5 which will be out in the next 24 hours. In the meantime, you could configure your networks in a wpa_supplicant config file. Don't use a catch all like above, create a more specific one.

Hp officejet 4680 is not recognized by either wireless or usb connection. Windows 7 OS.

This printer used to work wirelessly to my Windows Vista Laptop, then I bought a new HP tower computer and now the printer is not recognized by anything, new or old. New computer is an HP Pavilion Elite HPE running Win 7, old computer is a Sony laptop running Vista. I've tried turning on and off everything several times, unistalling and reinstalling all softwware several times, and running the HP Home Network Diagnostic Utility (both basic and advanced tools) several times. I have a Netgear 2.4GHz wireless network router -- Security type WPA2, Encyption type AES and a functioning Netwrok securty key that is not recognized by the wireless network setting on by the wirelsss netwrok wizard on the printer tools application. I don't remember running the network wizard to enable the printer when I was only using the laptop.
Any help wopuld be most grateful.
Thanks.

I just fixed my J4680 printer a couple of minutes ago (see my post).
Step 1: Unplug your printer
Step 2: Uninstall the program J4680 and ALL associated HP programs (IRIS, Websmart, etc.). There is a screen to select ALL programs.
Step 3: Reboot your PC to complete the uninstallation
Step 4: Plug in your printer
Step 5: Download the FULL j4680 package from HP's support website:
Step 6: Run the Installation. The first screen will ask if you want a Wireless connection so click on that. It connected my printer automatically.
That's it. My printer is printing and scanning great.

BELKIN usb wireless FSD9050 device not recognized by IMAC G4 800

Below is a thread from another group that I was advised to post here. If anyone knows of a solution or work around, it is appreciated.
Thanks
Topic : Belkin Not recognizing
This question is not answered. "Helpful" answers available: 2 . "Solved" answers available: 1 .
Reply to this Topic Subscribe to this Topic Back to Topic List
Replies : 14 - Last Post : Nov 30, 2007 6:32 AM by: real_tt
JakeHebert
Posts: 4
Registered: Sep 19, 2007
Belkin Not recognizing
Posted: Sep 19, 2007 9:04 PM
Reply Email
I bought the Belkin Wireless usb Mimo F5D9050 and it worked amazing with my Ibook G3 800Mhz.. but then it started to occasionally not work until i would eject it and reconnect it a few times.. Now no matter how many time si reconnect it it will not work... ive tried to re-install the belkin but still no luck.. and so i plugge dit into my Windows pc and it worked fine... What could this be! im going nuts
Ibook G3 800 Mhz Mac OS X (10.3.9)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Sep 19, 2007 9:39 PM in response to: JakeHebert
Reply Email
Hi, Jake. Welcome to Apple Discussions.
It's possible that your AirPort card has fizzled out on you. AirPort card failure doesn't happen very often, but it happened to me once, and it was very frustrating.
We diagnosed what was wrong with mine by my husband swapping his AirPort card with mine. Then my iBook would connect, but his wouldn't, so we knew it was the card.
Will the iBook work on any wireless network? Do you have someone with whom you could swap cards to see if that's the problem?
Possible sources for replacing the original AirPort card (links last checked 8/19/07):
http://www.dvwarehouse.com/Apple-Original-AirPort-Wireless-Card-802.11B-p-31366. html
http://www.synaptech.com/catalog/index.php?mainpage=index&cPath=4953
http://www.powerbookguy.com/xcart/catalog/Airport-Cards-price0-p-1-c-507.html
http://www.expercom.com/productdetail.html?PRODUCTID=305851
http://www.macrecycling.com/ibook-g3-c-18.html
http://techrestore.com/xcart/product.php?productid=16174
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
JakeHebert
Posts: 4
Registered: Sep 19, 2007
Re: Belkin Not recognizing
Posted: Sep 20, 2007 1:40 PM in response to: Ronda Wilson
Reply Email
well. no i have no airport card, and never have had one.. this wirless card is a usb plug-in one and .. it is recognized by every compute ri plug it into except the on ei need it for.. yet the one thats not recognizing it now USED to recopgnize it not even 2 weeks ago!... its realllyy frustrating... i mis susing my ibook lol
Ibook G3 800 Mhz Mac OS X (10.3.9)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Sep 20, 2007 3:12 PM in response to: JakeHebert
Reply Email
Have you tried using the other USB port? If neither port works, try plugging in a USB mouse to see if it works to confirm that your USB ports aren't damaged.
Have you installed any new software? Maybe a Security Update or something similar? Sometimes that will break functionality of third-party drivers.
You may need to go to the website of the manufacturer of the USB wireless device to see if an updated driver is available.
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
JakeHebert
Posts: 4
Registered: Sep 19, 2007
Re: Belkin Not recognizing
Posted: Sep 20, 2007 4:11 PM in response to: Ronda Wilson
Reply Email
mmm.. Both usb ports work fine with my wireless mouse... i will have to talk to a tech of Belkin.. but i hate that because i already had to once before... bahh... but i did search for a new updated version of the driver for the ** thing.. but no such luck.. I dont think any new software has been installed though ... i appreciat eyour help though Ronda!
Ibook G3 800 Mhz Mac OS X (10.3.9)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Sep 20, 2007 5:57 PM in response to: JakeHebert
Reply Email
You're most welcome.
What is the model number of the adapter?
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
JakeHebert
Posts: 4
Registered: Sep 19, 2007
Re: Belkin Not recognizing
Posted: Sep 20, 2007 6:24 PM in response to: Ronda Wilson
Reply Email
umm its um f5d9050 the 3001 series... its HUGE lol... but it USED to work like a dream.. baah
Ibook G3 800 Mhz Mac OS X (10.3.9)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Sep 20, 2007 8:10 PM in response to: JakeHebert
Reply Email
When did you buy it, Jake?
There is a driver that was released on June 19, 2007.
http://www.belkin.com/support/article/?lid=en&pid=F5D9050&aid=5925&scid=0
Even if this is the one you have installed, you may want to reinstall it.
Good luck.
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9
real_tt
Posts: 4
Registered: Nov 29, 2007
Re: Belkin Not recognizing
Posted: Nov 29, 2007 6:13 PM in response to: JakeHebert
Reply Email
Did this one ever get a real response. Mine is doing the same thing and the machine will not recognise that the usb is even plugged in. Any help is appreciated
Mac OS X (10.5.1)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Nov 29, 2007 6:21 PM in response to: real_tt
Reply Email
Hi, and welcome to Apple Discussions.
Since Jake hasn't posted in over two months, either that driver worked for him, he found the answer elsewhere, or he gave up. Since he hasn't posted back, we have no way of knowing.
What model computer do you have?
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9, MacBook 2.0/2 GB/10.4.x
real_tt
Posts: 4
Registered: Nov 29, 2007
Re: Belkin Not recognizing
Posted: Nov 29, 2007 6:35 PM in response to: Ronda Wilson
Reply Email
I MAC G4 and I have tried every driver listed on the forums with no success
it states to go to the network in system pref. to set up device
there appear to be no way I can figure out how to add the usb device
any help is appreciated
Mac OS X (10.5.1)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Nov 29, 2007 10:29 PM in response to: real_tt
Reply Email
Since you're running Leopard, I surmise that your iMac takes the AirPort Extreme card?
May I ask why you don't just get one of those? As I post this, the Apple Store has a refurbished one for $29.00.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=%2 2extreme+card%22
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9, MacBook 2.0/2 GB/10.4.x
real_tt
Posts: 4
Registered: Nov 29, 2007
Re: Belkin Not recognizing
Posted: Nov 30, 2007 5:52 AM in response to: Ronda Wilson
Reply Email
I am not running Leopard... using 10.4 and I already own the product. It is suppose to work and there is no reason to purchase another unit. All I need to understand is how to make the IMac recognize the USB device or how to configure the unit. Others have stated in this and other forums that they have used this unit with success.
Thanks for address this specific issue.
Since you're running Leopard, I surmise that your iMac takes the AirPort Extreme card?
May I ask why you don't just get one of those? As I post this, the Apple Store has a refurbished one for $29.00.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?find=%2 2extreme+card%22
Mac OS X (10.5.1)
Ronda Wilson
Posts: 13,597
From: The cornfields of Nebraska
Registered: Feb 2, 2003
Re: Belkin Not recognizing
Posted: Nov 30, 2007 6:06 AM in response to: real_tt
Reply Email
Your specifications at the bottom of your post state that you're running Mac OS X 10.5.1?
You may want to post in the Internet and Networking your iMac (Flat Panel) Forum. Maybe someone there can help you out. (You've posted in the iBook G3 Forum.)
eMac800/SuperDrive/512/OS 9.2.2; iBook800G3Combo/640-OS X 10.3.9; Mac OS 9.2.x iBook G4/1.2G/768/OS X 10.4.9, MacBook 2.0/2 GB/10.4.x
real_tt
Posts: 4
Registered: Nov 29, 2007
Re: Belkin Not recognizing
Posted: Nov 30, 2007 6:32 AM in response to: Ronda Wilson
Reply Email
I am using a laptop to connect to the internet not the machine that I am writing about. If I could do that I would not need any help. I will check out the other forum but this thread is on topic.
Mac OS X (10.5.1)

The information in your thread references an iBook quite a lot but the title of this post says iMac so I going to assume that you are trying to use this device with an iMac.
It is also unclear what version of the Mac OS you are using.
Let's start by stating the fact that these USB networking networking devices are not inherently supported by the Mac OS. Therefore they need drivers. These drivers are usually fragile and only work with a well defined version (or versions) of the Mac OS. Anytime that you make any upgrade to the Mac you are able to create an incompatibility with the driver and the device.
The Belkin F5D9050 does have some Mac OS drivers available at this link.
You should uninstall/remove the current driver for this device.
Restart your iMac.
Download and install the appropriate driver for the version of Mac OS on your iMac.
Restart your iMac.
If that doesn't work, either get the original AirPort card for the internal wireless slot in the iMac or get an Ethernet wireless adapter. An Ethernet wireless adapter requires no drivers and therefore will work with any Ethernet device.

Hp officejet pro 8600 connected wirelessly but not recognized

I have an hp officejet 8600 n911a which is connected to my wireless internet. I have run wireless network test results and printer status reports which both show connected. when you touch the internet icon it shows connected also with an ip address. However it will not connect to my computer, ipod, ipad, or any other device to print. The product software will not even ping the device to connect to the printer. It is like it will accept an incoming connection from my router but not send out a connection signal or recieve a signal to print on the same wireless connection. I have verified that it is set up on the same internet connection but the device is not recognized and when I type in the ip address in the address bar of chrome or explorer it says page cannot be opened. However I can email wirelessly to my printer to eprint by using the email given to me by my printer. I am very confused. Any help would be great.
Melody

With the network does the 5Ghz wirless have a different name to the 2Ghz network?
If they have the same network name then you should change the ssids to be different so then you can tell which networks its on.
From what you have told me it sounds like a 5Ghz 2 Ghz mismatch
JonW
I work for HP

Photosmart all in one 7510 not recognized but connected to wireless

I have a NETGEAR Router, WNDR3800. It is a dual band router running both a 5GHz and 2.4GHz network. I have never been able to maintain a working connection to the printer. After I reload the printer onto the known printers for the Mac, if the printer goes idle I am never able to re-establish the printer for use.
The mac and the printer are both connected to the same 2.4GHz network.
The network has WPA2-PSK [AES] security enabled
The network configuration page shows the network status as ready with Bonjour enabled
The Mac has never been able to pick up the printer wirelessly. I have always had to set it up via USB connection to get the Mac and printer to talk to each other. The printer will join the wireless network without the Mac, however, if i complete the process that way then the Mac will never see the printer.
Recenty updated to OS X Mavericks. Printer would not work although shows the status above. Downloaded new drivers for the OS X update. When running the HP utility to set up the printer, it was not recognized on the network. (reverified both were connected to the same 2.4Ghz network). Attempted to connect via USB. When establishing the network configuration for the printer on the HP Utility via the USB cable reveived an error message that stated the following (paraphrased):
Your printer is connected to the network but is not recognized by your Mac check with hp print website help (essentially)
I have reset the router and re-tried the above process. No difference
I have reloaded all the software and restarted the mac and printer. No difference.
I have manual assigned the IP Address for the printer and reserved the address on the router. Re-attempted to connected wirelessly and via usb. No difference.
I am at a loss as to what I can do next. Not sure if it a router issue or printer issue but I have no other issues with any equipment on this router both establishing connections to and communicating between several other devices. I would appreciate any help with this issue.

Hello dan_man182 and welcome the HP Forums!
I understand you're having an issue printing wirelessly. I can provide help for you.
Follow this document please: 'Unable to Find Printer' Error Message Displays on the Computer During a Wireless Network Installati...
Another tip I can give you is the security on your router. For some reason the connection may not like the WPA2-PSK [AES] security type. Try changing that to [TKIP] and see if that helps.
Furthermore, if your 5.0Ghz is active, but you are not using it, try disabling the 5.0Ghz frequency altogether. There is a possibility it could interfere somehow.
That is my personal thought on the matter, if you want a full detailed description on router settings you can refer to this: Suggested Router Configurations
Source: VisionAiry
Thank you for choosing the HP Forums! Let me know if that helps!
GiGi10
I used to work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the left to say “Thanks” for helping!

W520 is not recognizing 5GHz wireless channel

Recently I purchased E4200 wireless router. I have enabled both 2.4 and 5 GHz channel with different SSID. Both are recognized by a 3 year old W500 laptop with 32 bit windows XP. But the 5 GHz channel is not recognized in my new (4 month old) W520 Windows 7 64 bit OS. What configuration do I need to do for W520 to recognize the 5GHz channel?
Solved!
Go to Solution.

Thanks for answering my question.

Windows 7 not recognizing device - Dell Wireless 5620 EVDO HSPA Mobile Broadband Mini Card

Windows 7 is not recognizing my Dell Wireless 5620 EVDO HSPA Mobile Broadband Mini Card (Qualcomm Gobi 2000). I can't even uninstall the driver, it says that I don't have "sufficient permission" to stop device or something to that effect
(though I'm an administrator). I also can't re-install the same or different driver. I might have installed the wrong driver, though this is supposed to be the correct one according to Dell after typing in my service tag. I went to the FTP
to get one specifically for "Verizon Wireless", but I can't uninstall the prior driver.
How can I fix these issues? Thanks.

Hi,
Any update?
Have you tried safe mode mentioned in the first reply? What is the status of the driver in device manager? For "Verizon Wireless", have you installed any verizon software or related verizon device? Uninstall this kind software, then uninstll driver again
as a test.
Contact this support, maybe they can give some different ideas.
Verizon Wireless Support
http://www.verizonwireless.com/support/
NOTE
This
response contains a reference to a third party World Wide Web site. Microsoft is providing this information as a convenience to you.
Microsoft
does not control these sites and has not tested any software or information found on these sites.
Yolanda Zhu
TechNet Community Support

Wireless NIC Realtek RTL8191SE not recognized in Fedora 12

Similar Messages

Maybe you are looking for