Wireless NOT WORKING  HELP ME!!

all around my house i get wireless connection upstairs downstairs, the basement, even outside (diveway etc) but i recently moved my bedroom to a room above my garage in my home and the Wireless connection that i get everywhere else i cant get in that one room. We tried buying a stronger router. that did not work. I can get a connection further away from my new room, just not in my room. How do I solve this?

Although there is a limit to the functional length of a USB cable in regard to
how a product at the end of it, may (or not) work, you could attempt to use
a USB wireless adapter with the computer in that location, and run a longer
USB cable toward the base station's location, so as to limit the distance from
one to the other. This, to see if there is a way to use wireless and not hardwire.
Probably, overall, a wired Ethernet network would be better once such a thing
were installed; since it is more secure and uses more reliable technologies.
If you have two AirPort Extreme Base Stations, you can link them; to see if a
larger wireless network could result. Mine can do this. Perhaps, to try & use
a wireless antenna or adapter on your portable computer, could help?
And one less source of interruption, depending on how the garage is wired
and what kind of wireless garage door opener is used to activate the door.
Even the extra metal and other built-in structural differences in the garage
could be suspect in contributing causes for no or poor wireless networking.
Metal rain gutters, roof flashings, trim; electrical wires in walls and ceilings,
metal hardware for the garage door, all of these could affect wireless. Any
appliances, such as freezers and other items in the garage, also may do it.
There are some amplified wireless adapters one may try, to see if you can
expand the wireless network, past whatever local interruption exists. Yet,
if there is too much wood, metal, sheetrock layers, or other products in the
walls or overlapping roofs, or long metal items (pipes, downspouts, etc) all
of these items may be acting in concert to block out your wireless.
Within legal limits on how powerful your wireless network can be amplified,
there are some retail products for expanding a wireless network and one
of them is considered a Transceiver; upward of 4 watts. However, it will not
remove structural blocks in the building's construction; and if you expand a
local wireless network power too well, neighbors may be tempted to hack in.
Then, you can try other security methods to hide your network, if it happens!
Probably an Ethernet local network with only a few wireless access points,
made as secure as possible, would be the better way to go. Initially, it may
cost some time, money and effort to install the wires and Ethernet hardware.
Good luck & happy computing!

Similar Messages

  • Wireless not working HELP PLEASE

    Just today my wireless was working perfectly not problems at all. And then i get back from college 4 hrs later and it seems to not work anymore i called cisco and they want to charge me to fix it, and i dont have the money for it. I have tried reseting the router (pressing the small button with a paper clip for 30 seconds). And i have also unplugged it and plugged it back in and still nothing. I called my internet provider and my modem is working fine (im actually writing this with my laptop plugged straight into the modem via ethernet).  Could you guys help me out? exams are coming up and i cant keep taking turns using the internet with other people in my house, and i cant keep going to the library to study and do homework. Thanks, you have no idea how thankful ill be if this gets resolved    btw i have a cisco linksys E2500 series wireless router
    Solved!
    Go to Solution.

    If you have an extra ethernet cable you may reconfigure the router manually. For step-by-step instructions you may check it out from homesupport.cisco.com. You may also download the setup wizard from this website.

  • Wireless not working - help!

    Hi - I lost electric today and when I got home, wireless is gone.  I have powered down and up again, wireless still not working.  I can see other networks but not mine.
    I can hardwire to my computer to get on the internet but don't know how to restore the wireless again.
    Can someone help me?  I've been waiting on hold on the phone for an hour now...

    Seems that you lost your wireless configuration.  Easy to fix, but your best bet would be to connect (hardwired) like you are, connect with live chat and let the technicians take over your computer-they will tell you how. 
    Or you can download the instructions from this site and follow them step by step.  Just choose your product and select the PDF document.

  • Intel 6205 wireless not working with Lenovo W520

    Loving the new W520... very fast, if only the wireless would work. Unable to get wireless interface functioning, won't even show up in ifconfig. I've appended requested wireless information, thanks in advance for any assistance.
    1) Machine Brand and Model (PC/Laptop):
    Lenovo W520
    Intel Centrino Advanced-N 6205
    Note: Wireless switch on lefthand side enabled, bluetooth led lights up but wireless does not.
    2) Wireless Brand, Model and Wireless Chipset:
    $ lspci -nn
    03:00.0 Network controller [0280]: Intel Corporation 6000 Series Gen2 [8086:0085] (rev 34)
    3 ) check interface:
    ifconfig does not show wireless
    $ iwconfig
    lo no wireless extensions.
    eth0 no wireless extensions.
    4 ) Check for modules:
    $ lsmod
    iwlagn 215351 0
    iwlcore 139688 1 iwlagn
    mac80211 269644 2 iwlagn,iwlcore
    cfg80211 167809 3 iwlagn,iwlcore,mac80211
    5) Kernel boot messages
    $ dmesg
    [ 13.497936] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
    [ 13.497938] iwlagn: Copyright(c) 2003-2010 Intel Corporation
    [ 13.498058] iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 13.498089] iwlagn 0000:03:00.0: setting latency timer to 64
    [ 13.498181] iwlagn 0000:03:00.0: Detected 6000 Series 2x2 AGN Gen2a, REV=0xB0
    [ 13.499187] lp: driver loaded but no devices found
    [ 13.502642] alloc irq_desc for 22 on node -1
    [ 13.502645] alloc kstat_irqs on node -1
    6 ) Network configuration
    $ sudo lshw -C network
    *-network UNCLAIMED
    description: Network controller
    product: 6000 Series Gen2
    vendor: Intel Corporation
    physical id: 0
    bus info: pci@0000:03:00.0
    version: 34
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress cap_list
    configuration: latency=0
    resources: memory:d5300000-d5301fff
    7 ) Scan for networks:
    not relevant as no wireless interface appears
    8 ) Ubuntu Version:
    Ubuntu 10.10
    9 ) Kernel/architecture (including 32 vs. 64 bit):
    2.6.35-28-generic x86_64
    10 ) Restarting the network:
    sudo /etc/init.d/networking restart
    * Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0.
    [ OK ]
    Additionally, modinfo shows the following:
    $ modinfo iwlagn
    filename: /lib/modules/2.6.35-28-generic/updates/compat-wireless-2.6.36/iwlagn.ko
    alias: iwl4965
    license: GPL
    author: Copyright(c) 2003-2010 Intel Corporation <[email protected]>
    version: in-tree:
    description: Intel(R) Wireless WiFi Link AGN driver for Linux
    firmware: iwlwifi-4965-2.ucode
    firmware: iwlwifi-5150-2.ucode
    firmware: iwlwifi-5000-2.ucode
    firmware: iwlwifi-6000g2b-4.ucode
    firmware: iwlwifi-6000g2a-4.ucode
    firmware: iwlwifi-6050-4.ucode
    firmware: iwlwifi-6000-4.ucode
    firmware: iwlwifi-1000-3.ucode
    srcversion: 8F7F4C6196599FCA596C837

    Hi  sparhk, and welcome.
    One of the Lenovo staff who frequents the forum put out a call to help you in a private forum.  I do a little Linux, so I poked into it.  To my amazement my first Google hit was your thread where you indicate you have solved the problem.  (At least, it _looks_ like you...)
    May I respectfully suggest that a post back here indicating success would be a nice touch?  That way anyone who passes by looking for help with this issue will have a better chance of finding it.  For posterity, here it is (see post number 25):
    [SOLVED] Intel 6205 wireless not working with Lenovo W520
    Glad you got it working,
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • S10-3t bluetooth and wireless not working with windows 8

    S10-3t bluetooth and wireless not working with windows 8. I tried everything but doesn't work at all. I don't know where to find the new drivers that are comatible with windows 8 ???!!! please help me to solve this problem because i tried everything....

    Do you still have your windows7 install files ? 
    ( installation image is usually in LENOVO_PART OKRBackup/Factory ) ? I lost them :\
    if yes I fear you have to enable it in win7 and then use it in win8
    http://rzr.online.fr/q/lenovo# g470 s103t (Please Contact me if your s10-3T is booting win7 or support bluetooth, 3g)
    Lenovo S10-3t | Model Name : 0651 | Mfg Date: 2010/06/08
    Lenovo G470 | Model Name : 20078 | M fg Date: 11/03/23 | BIOS: 40CN23WW(V2.09) 06/20/2011 | CPU: i5-2410M | Linux version 3.3.4lenovog470+ (root@lap) (gcc version 4.6.3 (Debian 4.6.3-4) ) #8 SMP Tue May 1 10:23:48 CEST 2012
    OS:GNU/Linux/Debian

  • After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    After upgrading to iOS 5 I cannot enter to mail (outlook exchange ),contact did not open, general settings - mail contact did not work.help me

    Hi,
    the settings are gone, i guess. But even worse, I cannot get the iPad2 to play Full HD thru the Apple digital AV adaptor using apps that support  (and advertise this), like AVPlayer HD. This definiteley used to work before one of the last iOS upgrades. (I am now at 5.1.1).

  • When i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    when i go in my settings on my ipod touch 3gen it says no wi-fi as in i cant connect to any wi-fi at all i tried to restore but did not work HELP PLEASE

    See:
    iOS: Wi-Fi or Bluetooth settings grayed out or dim
    If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
    Apple Retail Store - Genius Bar

  • Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    Panasonic .MOV files only play audio no video in Premiere Elements 11??? Not Working Help

    It all depends on the codec the file uses, Karli.
    What model of camcorder is this video coming from?
    Are you working on a Mac or a PC? Have you got the latest version of Quicktime, per the program requirements? When you started your project, did you select the settings for a DSLR at 720p? This is a vital step since it will activate the components your computer will need to work with many of these types of files.
    BY THE WAY, KARLI--
    PLEASE do not post the same question more than once on this forum! You've already got a thread going with this same question and several responses posted. It's very confusing when you post the same question a second time and start a whole new discussion.

  • My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    My MacBook Air won't turn on? I have to dropped it but earlier in the day I got a notification about a full single drive. I have tried the ideas in the communities but its still not working, help!

    See this article:
    http://support.apple.com/kb/ht3964
    Find the section that applies to your computer, and follow the instructions.
    Shut down the computer.
    Plug in the MagSafe power adapter to a power source, connecting it to the Mac if its not already connected.
    On the built-in keyboard, press the (left side) Shift-Control-Option keys and the power button at the same time.
    Release all the keys and the power button at the same time.
    Press the power button to turn on the computer. 
    Note: The LED on the MagSafe power adapter may change states or temporarily turn off when you reset the SMC.

  • I cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please

    i cant open my ipad after i turned on the voice in accessibility i have a passcode and i tried to enter my password but it not working. help me please..
    i updated my ipad in ios 6

    Turn off VoiceOver
    1. Press the Home button
    2. Tap Settings.
    3. Then double-tap Settings.
    4. Tap General.
    5. Then double-tap General.
    6. Use three fingers on the screen to scroll to Accessibility
    7. Tap Accessibility.
    8. Then double-tap Accessibility
    9. Tap VoiceOver
    10. Then double-tap VoiceOver.
    11. Tap "On" next to VoiceOver
    12. Then double-tap "On" to turn it off.

  • Lower volume button control not working help?

    Lower volume button control not working help?

    If you only restored from backup, restore to factory defaults/new iPod.  If you then still have the problem it is likely a hardware problem and an appointment at the Genius Bar of an Apple store is in order.

  • HP pavilion dv6 microphone not working . help please . . .

    HP pavilion dv6 microphone not working . help please . . .

    Hi,
    DV6 is a series of hundreads of models, what is yours ? To help us answer question quicker, please read this:
       http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
    You may wat to try this first:
    1. Right click speaker icon (right hand corner)
    2. Select Microphone devices
    3. Right click Microphone
    4. Enable it
    5. Click Apply/Ok
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • After update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    after update.. i can not start the ipad, when i press agree in the terms ...it will freeze and the screen not working///help please

    What to Do When Your iPad Won't Turn On
    http://ipad.about.com/od/iPad_Troubleshooting/ss/What-To-Do-When-Your-Ipad-Wo-No t-Turn-On.htm
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
    http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
    iPad: Basic troubleshooting
    http://support.apple.com/kb/TS3274
    iOS: Resolving update and restore alert messages
    http://support.apple.com/kb/TS1275
    iPad: Unable to update or restore
    http://support.apple.com/kb/ht4097
     Cheers, Tom

  • On my iPhone 5 camera photographed not clear. blurry pictures, autofocus does not work. help please!

    on my iPhone 5 camera photographed not clear. blurry pictures, autofocus does not work. help please!

    Could you please describe how you are trying to delete a single text message and it will not work? What are you seeing in place of the trash can icon?

  • HT201210 I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please

    Hello

    I can not restore my iPhone 4S itunes error says I have 29 and I put it in DFU mode and not working help please

Maybe you are looking for

  • CSV output includes div info in first column

    All, I have a report on a page that allows for CSV output. For some reason when I look at the output the first column in the header row includes div information and appears as follows: <div id="report_1585218597659393_catch">"Title"Then in the last c

  • Cpu and grafics card upgrade

    Hey guys! To start with these are the specs of my Notebook: System: -Windows 10 64Bit CPU: -Intel Core i7-3632QM (up tp 3.2Ghz) Ivy Bridge 22nm Tech RAM: -Slot 1 Kingston PC3-12800 (800Mhz) 4Gb DDR3-Slot 2 Kingston PC3-12800(800Mhz) 4Gb DDR3 Grafics:

  • Cheese (3.4.2-1) Segmentation Fault

    Good day, everybody. I have a problem with Cheese. Today i bought a Webcam, then i tried to install cheese. Everything was ok until i launch the app. It says (cheese:1952): Gtk-WARNING **: Attempting to add a widget with type GtkImage to a GtkToggleB

  • Password recovery

    Hi, I have a probook 4510s with Windows Vista and I had reset my password for the Administrator account and i can't remember my password. How can I get back on the account to change the password, but it has multiple accouts on it so when i tried the

  • Photos, SMS and me gallery

    Are able to send text messages with pictures attached? When I try to upload photos to mobile me only 3 out of 20 gallaries appear in list, why?