WIreless not working! since upgrade! help!

All was working fine never had a proplem it asked me to update a few days i did without any proplems and since then i have been unable to access my wireless. i have went to, 2 friends houses both with wireless with no luck is there anyway of uninstallin wot i did or better still fix the proplem.... cheers Zack, by the way it works fine when i plug in the lan cable!

I think you probably downloaded "AirPort Base Station Update 2007-002" like me. I'm not sure (I have another post up to see) but I think this update was actually released a month or more ago and wreaked havoc with many users. While the update is still out there is beyond me. I ran a reinstall and will avoid "2007-002" as long as I can. You may have to do the same. And you may not. I'm not well enough versed in Macs enough yet to say.

Similar Messages

Airport w/wireless not working since upgrading to Leopard

I run a laptop via a NETGEAR wireless system from my main machine.
I had no problem until I upgraded to Leopard. Now the laptop doesn't see the wireless via airport. help!!

To Clifford Hritz
Re: Networking
Sadly, this is still a problem for at least some MacBook Pro's and OSX on version 10.5.2 and above.
Our MBP is still on 10.5.1 (with WPA), but gets 'connection failed' on any System Software version above that, with *no other* parameters changed on our side. Curiously, my iMac doesn't connect wirelessly either, on any version above OSX 10.5.1, so I use ethernet instead. The MBP remains (yet works perfectly) on 10.5.1, meaning that any subsequent security updates, plus other enhancements, are unavailable to the regular user of that machine (and she is not too happy about it!).
I have read many of Mr Kucharski's posts and he is undoubtedly very knowledgeable regarding Mac OSX etc., but seems unable to resolve this issue. He does try hard to be helpful (that is clear). However, other users have insisted that there is a problem with OSX past 10.5.1 or .2 and wireless networking with at least some MBPs (and perhaps MacBooks), after having removed all other factors.
Sorry that this doesn't help. I can only console with the thought that there are others out here with the same problem, still waiting for Apple to acknowledge, let alone correct it. Perhaps 10.6 will be the answer.
End of rant.

HT3258 My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

My Parallels program is now not working since upgrading my MacBook Pro to OS X Mountain Lion. I was wondering if there is a solution to getting this working again?

You just need to update it to the latest version. See:
http://kb.parallels.com/114449

Home sharing on apple tv not working since upgrade to yosimite

home sharing with my Apple TV (gen 3) and iMac not working since upgrading iTunes (12.0.01.26) and installing Yosemite (10.10) on my iMac (2008).
everything worked fine before this!

Hey stephenfromdominion,
Thanks for the question. I understand that you are experiencing issues with Home Sharing after upgrading to OS X Yosemite. For troubleshooting information, check out the following resource:
Troubleshooting Home Sharing
http://support.apple.com/kb/ts2972
Thanks,
Matt M.

Flash Player won't work since upgrade - Help!

My husband & I have both recently had Flash Player upgrades - mine to 10.3.181.35 and his to 10.3.181
.34. Since the upgrade, neither works. Video seems to start but then freezes after a few seconds, then start, then freezes
and so on - what to do ?

hey i am also experiencing the same problem from the past few days. I upgraded to the same version , but it's not working properly. I was trying to watch the trailer of the latest movie Rise of the planet of the Apes online, but it was showing some kid of error and it was not working. Please help me too, As my work is pending duw to this.

Canon Printer mx860 not working since upgrade to Yosemite, it is connected to my Mac via usb. Any suggestions? Thanks. LL

My 2009 Canon MX860 Pixma printer not working since an upgrade to Yosemite on my MAC version 10.10. It is connected by USB. Have had no previous issues with printing, scanning or faxing. When trying to print my Calendar I only get light vertical dotted lines, none horizontal, no words and vague header colors. Checked printer image on the on my MAC which shows the same problem. All of the color and black cartridges are new.
The recent upgrade to the Canon application says it is completed but it is not, image on application upgrade is a circle with an X.
Any suggestions? Could this simply be a compatibility problem? I'd sure like to keep my Canon printer.
Thanks, LL

Can you open System Information (Applications > Utilities) and select Printers in the left sidebar. If the MX is the only printer connected to the Mac then its information will be shown in the right pane. If you have more than one printer, then a list will be shown in the top right pane. Select the MX to see its information in the bottom right pane. Can you copy this information and paste back here for me to check.
Also an FYI - this is the Mavericks forum. The Yosemite forum is here

My morphie pack does not work since upgrading

My juice pack (Morphie) Does not work since i have upgraded the ios to 7.1.1
I have two iphones a 4s that has not been updated yet and also the 5s which has been updated. The 4s is working perfectly well with the juice pack but the 5s is absoultely crap to say the least. I complained to Morphie and to their credit the sent me a new pack and it has the same problem. This MEANS since the update there has been a change with apple and they have made our 100€ chargers redundant as I only get 20 - 25% extra battery when I should be getting a full charge
This is not acceptable for phones that are expensive and the accessories that we buy to go with them are also an additional expense and very expensieve to. That doesnt matter too much when they work, but then they dont it is NOT good.
Someone come back to us and give us a solution please.
Elena - a very loyal apple client with apple imacs in the office, mac book pros and air mac for sale staff along with ipad minis and iphones......... NOT A HAPPY CLIENT

3l3na t wrote:
Thanks guys for the responses but I am not convinced this is a MOPHIE problem. Their customer service department have been great and look after their clients. I have two iphone 4s´s which have not been upgraded for fear of being left with the rubbish battery I have with my relatively new iphone 5s. Mophie have replaced the amost new juice pack that I had with a completely new one that has the same problem...... funny how this has happened since the ios 7.1.1. update
I have been using MOPHIE juice packs for a number of years and have never experienced anything like this before. It seems rather strange that after upgrading I have this problem that APPLE negates to rectify.
Of course I wouldn´t have to use a 3rd party accessory if the battery was made to last and if APPLE had an alternative, I would of course buy apple but they don´t. I am a huge fan of Apple but cannot run a business with phones that cannot be upgraded for the fear of loosing battery life which would mean loosing clients which would mean loosing my lively hood.
Full phone restore was done too.
Still not HAPPY
Sorry, as already stated your using a 3rd party accessory take it up with mophie.
I have no issue with my mophie after updating to 7.1.1 - so your theory is flawed.
My battery life can last up to a day and a 1/2 - I only bought the mophie as a backup battery and because it is bulky and can protect my phone in case I drop it.

Signature field NOT working since upgrade to Adobe Pro X

Hi Forum,
Form stop working since upgraded to Pro X (ver 10) in Adobe. Getting this message:
IntegriSign
This plug-in is intended for validating signatuers signed using earlier versions of Acrobat. To sign using this version of Acrobat use "IntegriSign to Acrobat 9.0 and later" handler
I have changed settings in Adobe Pro X to the above but still get the same message.
Do anyone know how to fix this?
Thanks,
Patricia

Download directly from Apple and install over what you have now;
iTunes 12.0.1

WRT54G wireless not working after upgrading to windows vista, please help

Hello everyone....
I have a few problems. I upgraded to Windows Vista and cant seem to get my wireless internet working. My router is WRT54G wireless-g broadband router. Ever since I upgraded Vista my xbox 360 will not connect.
I just bought a new wireless web camera and that does not work either because the wireless is not working.
Any suggestions on what I should do to solve this issue?
I noticed when I goto 192.168.1.1 my firmware version is Firmware Version: v3.03.9 does that have anything to do with it? Is there a more up-to-date version that will help?
Hope to hear from someone.

I have the same problem, and so does my son, he has a toshiba satellite new laptop and I have an acer new laptop, both have Vista on them, and my wife has XP and has no problem getting on teh router, but i have this problem everyday.
Eventually it will all of a sudden show up and connect and start working, then if you laeave your computer in standby movde overnight, it will still work in the morning, but if you shut down comeplety you will lose the connection for who knows how long. what is the fix Linksys?
(Edited post for guideline compliance. Thanks!)
Message Edited by JOHNDOE_06 on 12-28-2007 07:28 AM

Node.js: running "npm help term " not working since upgrade to 0.8.3

Running
npm help <command>
usually displays npm's man page on <command>. And if the the command doesn't exist, npm will show a "top hits" list of related commands.
But since upgrading to 0.8.3, running it will always show the "top hits" list, even for existing commands.
After digging around I found that the problem is the man files that npm uses in /usr/lib/node_modules/npm/man are gzipped (with filenames like install.1.gz) which breaks npm since npm is expecting ungizipped filenames.
After further digging, it seems that the gzipping of npm's man pages was only added in node 0.8.2-2
So, basically just checking if anyone has this same problem (and confirming it's not a problem with upstream) before submitting it to bugs.archlinux.org

The man command should handle gzipped or non-zipped man pages just fine. I'm not sure if there is an official standard, but packages are free to use gz'ed or non-zipped man pages - they both work just fine. If it's not an official standard recommendation, though, gzipped man pages have become so common that they are almost a 'de facto' standard. But package managers (at least pacman) do not gzip the man pages. This is generally handled upstream or in the packages Makefile.
But, more to the point for the present issue, while man can open either format of page, if you give a full path, you must include the extension. Example:
$pacman -Ql bash | grep man
bash /usr/share/man/
bash /usr/share/man/man1/
bash /usr/share/man/man1/bash.1.gz
bash /usr/share/man/man1/bashbug.1.gz
$ man bash #works
$ man /usr/share/man/man1/bash.1.gz #works
$ man /usr/share/man/man1/bash.1
man: /usr/share/man/man1/bash.1: No such file or directory
No manual entry for /usr/share/man/man1/bash.1
.... er ... I just installed this again and did some tinkering. Most of what I've said is true (and perhaps someday useful) but currently irrelevant. Npm does not use `man` at all. It just echo's it's help information directly to the terminal.
Perhaps the syntax has changed since the last version you used, but it seems to be doing just what it is supposed to:
$ npm help
Usage: npm <command>
where <command> is one of:
... <snip> ...
npm <cmd> -h quick help on <cmd>
npm -l display full usage info
npm faq commonly asked questions
npm help <term> search for help on <term>
npm help npm involved overview
Specify configs in the ini-formatted file:
/home/jmcclure/.npmrc
or on the command line via: npm <command> --key value
Config info can be viewed via: npm help config
[email protected] /usr/lib/node_modules/npm
$ npm help cache
Top hits for "cache"
npm help cache cache:23
npm help config cache:20
npm help folders cache:7
npm help pack cache:2
npm help index cache:2
npm help changelog cache:1
(run with -l or --long to see more context)
$ npm cache -h
npm cache add <tarball file>
npm cache add <folder>
npm cache add <tarball url>
npm cache add <git url>
npm cache add <name>@<version>
npm cache ls [<path>]
npm cache clean [<pkg>[@<version>]]
Note in the first output it specifies that "npm help <term>" is only supposed to search for the term and return the top-listing list while "npm <command> -h" is the syntax to view the help information for a given command.
Last edited by Trilby (2012-07-25 14:16:31)

Mega pc 651 not working since upgrading to xp

I have recently upgraded my pc to windows xp and since then my tv tuner is not working. Not knowing much about drivers etc, can anyone tell me what drivers I should be using and where to download them from. I also don't have my original msipvs & win dvd cd so cannot load this back on. I have found the download for this but it asks for the serial number from the original cd - WHICH I DO NOT HAVE....can anyone help please?

download the TV@nywhere Master drivers, and read through the sticky topic on the same card, the serial number is found there

Wifi syncing not working since upgrading to iOS 6

Has anyone had an issue with and found a solution to wifi syncing after upgrading to iOS 6? I have not been able to get either my iPhone 4 or 3d gen iPad to sync since upgrading last week. I have the latest version of iTunes. I've tried disabling wifi syncing and the closing/restarting iTunes. I've tried turning my iMac's wifi off and on. The devices show, but will not automatically wifi sync.
Thanks in advance!

I have a variation on that problem. I upgraded my iPhone 4s and my new iPad to iOS6. No problems synching the new iPad to iTunes wirelessly. My iPhone will not sync wirelessly unless I turn it off, then on again. However, if the phone goes out of wireless range, then returns, it will no longer sync wirelessly to iTunes. Otherwise, the wireless connection appears to be working, e.g., I can connect to the internet.

Gmail push not working since upgrading to 4.0

I have not been able to get my email to push since upgrading to 4.0. I have a 3GS and it worked great until the upgrade. Still have it set to push. Tried deleting itunes completely and then restore of iphone. Still no go. Please help.

I have this problem also. It's really persistent and quite annoying. My Mail is silent like a rock on my iPhone 3gs; it's not pushing email notifications at all. To get new emails, I have to open Mail repeatedly, which defies the very definition of "notification" and "push" I really dislike the 4.0 update. I wish I never upgraded to it because everything was perfectly fine prior to the upgrade...

Nike+ ipod not working since upgrading to ios5

I used to link my phone to the Matrix machines which are Nike+ iPod compliant. It used to be fine, I used to run, the runs were never displayed as historic data on the phone but when I synced my phone with iTunes it used to update the website. This worked wheter I used the treadmill/ cycling machine etc.
Since upgrading to iOS5, nothing has synced with the Nike website. After my run a message comes up saying "Workout Completed. You can send your workouts to the Nke+ website in Settings". Am not sure why or how to get this working again.
Any help would be appriciated.

Sorry ignore this. I just went into Settings, went to the Nike+iPod section then at the botom there was an option to send workouts. I had pressed this before but it didn't work. It did today.
Difference today is that I'm trying from home with WiFi. Who knows, just glad its working!

Bluetooth and Isight not working since upgrade to Mountain Lion

Hello,
I have a mid-2010 MBP running OSX 10.8.2.
Ever since upgrading to Mountain Lion, My bluetooth and iSight both have stopped working. I have tried the clear the SMC numerous times. Mostly it does not have any effect. However, a couple of times, it has restored service to the iSight and the bluetooth, but as soon as I reboot the machine they are back to being disabled. Sometimes they become available without my resetting the SMC and for seemingly no reason. I have also replaced a couple of different kext files: Apple_iSight.kext and AppleUsbVideoSupport.kext with known good ones. I also Verified and Repaired on the disk. In this case, permissions issues were detected and repaired, but without fixing my original problems.
I would like desperately to resolve this without buying a new disk and doing a fresh install of OSX Lion. I would definitely NOT go back to Moutain Lion in this scenario. But I don't know what do next. I don't see many posts on this subject and those I have seen do not offer much hope. I know I am not the only one suffering with this, but I don't think Apple is addressing the problems, because they may not be pervasive enough right now.
If anyone has found a way to resolve this permanently, please share with me. I would like to roll back to Lion, but can't do that either.
Can anyone help me out?
Thanks,
Brad.
<Edited by Host>

This is likely a conflict with some 3-rd party s/w you have on the MBP but not the other two computers. Have a look in here
 > System Preferences.. Users & Groups | Login Items
Is there something in here that's not in the same list on the other Macs? If so, try removing it and restarting your computer. If that solves the problem, try contacting the developer to see if there's an update.
If that doesn't solve the problem, go through your other 3rd party apps and look for updates on all of them. One of them is stopping your mouse from working properly.

System sounds do not work since upgrade to ML 10.8/10.8.1

Hello. Since I upgraded to Mountain Lion, I have the persistent problem of my system sounds not working, after my laptop sleeps. Fresh after a restart, they will work..then, after screen saver or sleep, they will not.
Here's what doesn't sound:
- Apple mail sounds (sending, receiving)
- alert sounds
- Sys Pref -> Sound -> any/all sound effect selection
- screen capture click
Here's what always works fine:
- the pop-pop-pop sound when I increase/decrease the volume
- iTunes
- any sound from audio/visual embedded in browsers
- sound from all 3rd party apps
Internal speakers are selected
No problem throwing out sound to airplay, etc.
No problem with non-system non-Mail sounds
All sounds work fine after a restart...but after a sleep or a screen saver, they will cease working until the next restart.
MacBook Air, 10.8.1 (also was noticed under 10.8)
1.7 GHz, 4 GB
I do see posts where people are experiencing the same, but no real solutions. I have found & trashed the prefs file (from other posting solution) but that did not solve this persistent issue. The sounds always DO work fresh after restart...just after sleeping, they do not. Thank you :-)

Yeah, just to keep everyone breathlessly updated: there has been no fix for me.
Amusingly (mostly not..) on the plane yesterday, when I plugged in my headphones, I was greeted with about 3 weeks' worth of Sent Mail and Alert tones. Good times.
The fix involving Audio MIDI Setup and momentarily changing the internal speakers integer dropdown list used to occasionally work for me...but lately it has not. I'm just making do with no mail sounds, like a chump. How I wish GrowlMail worked with 10.8 because I could get my sounds that way.

WIreless not working! since upgrade! help!

Similar Messages

Maybe you are looking for