Wireless on 1811W not getting IP via DHCP

What am I doing wrong? The wireless client authenticates to the router, but doesn't get an IP via DHCP? Help??

Hi Jeff,
Just now got the chnace to apply your suggestions and test. Still no go.
Here's the updated config.
Just want the wireless to be an extension of the wired network - no "guest" access required - so no additional DHCP pool/rules to apply.

Similar Messages

Static Clients Not Getting IP via DHCP -- Solution?

I set up some static maps to client machines on the LAN and thereafter was having some intermittent problems with their getting IP address. Some did, some didn't. I read this thread:
http://discussions.apple.com/thread.jspa?messageID=660758

The solution posted in the quoted thread above works. Need to create an address group for 0.0.0.0 and open the port. Also, make sure that the static IPs are in the specified address range for DHCP handouts.

Satellite Pro L300-12H not getting IP from DHCP router via cable

My Vista Premium SP1 laptop is connected via wireless connection to a Buffalo ADSL modem/router model WBMR-G54 which works fine. However, I tried the other day to connect up the LAN card via RJ45 cable to the router and it won't work! I get the message "limited connectivity" and an IP of 169.254.xxx.xxx which suggests it is not getting an IP from the router.
I been on various web sites and tried all sorts of things like unchecking ipv6 on the LAN card properties, turning off DHCP Broadcast flag in the registry (as per micrsoft issue) etc. but to no avail.
Anybody got any suggestions to get it working?
NB: I took the laptop into work and connected it to the Windows 2003 server network and got a DHCP IP straight away!?!

Hi wakefijr,
To be honest, it's still worth checking with your ISP or the router manufacturer because they will be able to guide you through the settings of the router. You're quite right about the 169.254.xxx.xxx IP address, it means that the DHCP server within the router isn't assigning an IP address to the laptop so the laptop is assigning itself an IP address via APIPA.
Short of checking the DHCP router settings, one other thing you could do is disable APIPA and try using the alternate IP configuration, this is how:
* Go to the *Start Menu* and in the *Start Search* box, type in *ncpa.cpl* and hit Enter, this will open up network connections
* Go into the properties of the LAN and properties of IPv4
* Click on the *Alternate Configuration* tab
* You will see that it is set to APIPA, you can change to *User configured* and input an available IP address, the correct subnet mask (most likely 255.255.255.0) and default gateway.
* Click *OK* as many times as you need to save all changes, then reboot with the RJ45 cable connected.
What this will then do is make the laptop try looking for a DHCP server to assign an IP address, but if no DHCP server is assigning an IP address to this laptop then it will assign one that should work on the network.
But really check router configuration as a priority.

Wireless 2504,user not getting dhcp ip address

Hi i have configured wlc 2504 .in that i have configured two interfaces.one is guest, 2nd is internal user,
the pblm when user try to connect with that contain ssid user not getting ip address,
i have connected only one link between core to wlc on port 1.for guest interface i used port 4.but no physical link.
Please help this

There are multiple ways how the clients can get their IP-address in a WLC deployment.
From the WLC-FAQ:
How does DHCP work with the WLC?
A. The WLC is designed to act as a DHCP relay agent to the external DHCP server and acts like a DHCP server to the client. This is the sequence of events that occurs:
Generally, WLAN is tied to an interface which is configured with a DHCP server.
When the WLC receives a DHCP request from the client on a WLAN, it relays the request to the DHCP server with its management IP address.
The WLC shows its Virtual IP address, which must be a non-routable address, usually configured as 1.1.1.1, as the DHCP server to the client.
The WLC forwards the DHCP reply from the DHCP server to the wireless client with its Virtual IP address.Note: You can also configure the WLC to act as a DHCP server. For more information on how to configure a WLC as a DHCP server, refer to the Configuring DHCP Scopes section of the document Cisco Wireless LAN Controller Configuration Guide Release 5.1.
If you want more in-depth information you should read "DHCP with the WLC":
http://www.cisco.com/en/US/partner/products/ps6366/products_tech_note09186a0080af5d13.shtml
Don't stop after you've improved your network! Improve the world by lending money to the working poor:
http://www.kiva.org/invitedby/karsteni

WLC 5508 : WPA2 enabled SSID - especially Intel & Dell wireless cards are not getting connected

Hi ,
I have one pecular issue in my wireless lan set-up. I have some laptop users who are using below inbuilt wireless adapter/cards :
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
1 ) Dell wireless 1397 WLAN Minicard
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin:0cm;
mso-para-margin-bottom:.0001pt;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
2 ) Intel Centrino Advanced N6200 AGN
above card are having issue with WPA2 enabled ssid connecitivity. strange is , the same users are getting connected to other wep enabled SSID but its not working for WPA2 SSID.
I have external ACS server which is used for radius authentication. Last time I had put same query in support forum did some workaround.
eq. disabling DHCP proxy option in WLC and moving all DHCP scope in external server.
After doing this workaround this mentioned users are still facing issue. I gone through some cisco document and some forums and came across that there is something to be done in " Session Timed Out " optionin WLC
which is default 1800 sec based on that I tried to capture debug outputs for mentioned above problematic clients and user who is working fine .
I gone through the same debug output and observed :
User who is working fine :
Processing Access-Accept for mobile 00:22:5f:8d:55:84
00:xx:xx:xx:xx:xx Setting re-auth timeout to 1800 seconds, got from WLAN config.
00:xx:xx:xx:xx:xx Station 00:22:5f:8d:55:84 setting dot1x reauth timeout = 1800
00:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station 00:22:5f:8d:55:84 (RSN 2)
00:xx:xx:xx:xx:xx Adding BSSID 00:1f:ca:2c:f3:01 to PMKID cache for station 00:22:5f:8d:55:84
New PMKID: (16)
The User / card which is having issue :
Processing Access-Accept for mobile 00:22:5f:90:a2:ac
00:xx:xx:xx:xx:xx Setting re-auth timeout to 0 seconds, got from WLAN config.
00:xx:xx:xx:xx:xx Station 00:22:5f:90:a2:ac setting dot1x reauth timeout = 0
00:xx:xx:xx:xx:xx Stopping reauth timeout for 00:22:5f:90:a2:ac
00:xx:xx:xx:xx:xx Creating a PKC PMKID Cache entry for station 00:22:5f:90:a2:ac (RSN 2)
00:xx:xx:xx:xx:xx Adding BSSID 00:26:cb:1d:fe:31 to PMKID cache for station 00:22:5f:90:a2:ac
New PMKID: (16)
Please suggest me to do workaround.

Hi,
According to output of working as well as not working wireless cards ,
below is my observations :
Not working wireless cards observation :
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The client passed the L2 authentication and that, after successful association, it is now going into the DHCP_REQD state
Not-working wirelss card :
*Apr 06 11:58:15.866: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) Successfully plumbed mobile rule (ACL ID 255)
*Apr 06 11:58:15.866: 0c:60:76:3e:8c:49 Stopping retransmission timer for mobile 0c:60:76:3e:8c:49
*Apr 06 11:58:15.869: 0c:60:76:3e:8c:49 10.10.232.137 Added NPU entry of type 1, dtlFlags 0x0
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0cm 5.4pt 0cm 5.4pt;
mso-para-margin-top:0cm;
mso-para-margin-right:0cm;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0cm;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
The client entry is added to the Network Processing Unit (NPU) of the controller with an IP address of 10.10.232.137 but after that , I am getting below output
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy AP LOCP - mode:0 slotId:0, apMac 0x0:1f:ca:2c:ea:e0
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy WLAN LOCP EssIndex:2 aid:50 ssid:USTRI_SECURE
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x0, eaptype:0x2 w:0x1 aalg:0x0, PMState:        RUN
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x1 protocol2:0x3 statuscode 0, reasoncode 99, status 3
*Apr 06 11:58:22.742: 0c:60:76:3e:8c:49 Copy Username LOCP :   U25744
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy IP LOCP: 0xa0ae889
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy CCX LOCP 4
*Apr 06 11:58:22.743: 0c:60:76:3e:8c:49 Copy MobilityData LOCP status:1, anchorip:0x0
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) State Update from Mobility-Complete to Mobility-Incomplete
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 Clearing Address 10.10.232.137 on mobile
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 10.10.232.137 RUN (20) Change state to DHCP_REQD (7) last state RUN (20)
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 apfMmProcessDeleteMobile (apf_mm.c:522) Expiring Mobile!
*Apr 06 11:59:14.002: 0c:60:76:3e:8c:49 apfMsExpireMobileStation (apf_ms.c:4427) Changing state for mobile 0c:60:76:3e:8c:49 on AP 00:1f:ca:2c:ea:e0 from Associated to Disassociated.
working cards ouput :
*Apr 06 12:16:28.038: 00:22:5f:8d:55:84 10.10.232.190 RUN (20) Successfully plumbed mobile rule (ACL ID 255)
*Apr 06 12:16:28.038: 00:22:5f:8d:55:84 Stopping retransmission timer for mobile 00:22:5f:8d:55:84
*Apr 06 12:16:28.042: 00:22:5f:8d:55:84 10.10.232.190 Added NPU entry of type 1, dtlFlags 0x0
The client entry is added to the Network Processing Unit (NPU) of the controller with an IP address of 10.10.232.190 and as expected , I am getting below output
*Apr 06 12:16:28.749: 00:22:5f:8d:55:84 DHCP received op BOOTREQUEST (1) (len 321, port 29, encap 0xec03)
*Apr 06 12:16:28.751: 00:22:5f:8d:55:84 DHCP processing DHCP REQUEST (3)
*Apr 06 12:16:28.751: 00:22:5f:8d:55:84 DHCP   op: BOOTREQUEST, htype: Ethernet, hlen: 6, hops: 0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   xid: 0x6eefbbb8 (1861204920), secs: 0, flags: 0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   chaddr: 00:22:5f:8d:55:84
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   ciaddr: 10.10.232.190, yiaddr: 0.0.0.0
*Apr 06 12:16:28.752: 00:22:5f:8d:55:84 DHCP   siaddr: 0.0.0.0, giaddr: 0.0.0.0
*Apr 06 12:16:28.753: 00:22:5f:8d:55:84 DHCP successfully bridged packet to DS
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy AP LOCP - mode:0 slotId:0, apMac 0x0:1f:ca:2c:f3:0
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy WLAN LOCP EssIndex:2 aid:10 ssid:USTRI_SECURE
*Apr 06 12:16:30.751: 00:22:5f:8d:55:84 Copy Security LOCP ecypher:0x0 ptype:0x2, p:0x0, eaptype:0x2 w:0x1 aalg:0x0, PMState:        RUN
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy 802.11 LOCP a:0x0 b:0x0 c:0x0 d:0x0 e:0x1 protocol2:0x3 statuscode 0, reasoncode 99, status 3
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy Username LOCP : USTR\U17967
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy IP LOCP: 0xa0ae8be
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy CCX LOCP 4
*Apr 06 12:16:30.752: 00:22:5f:8d:55:84 Copy MobilityData LOCP status:1, anchorip:0x0
Finally client is getting stuck with DHCP-REQD state ..................
Please look into this and put light on this ............

Ap not getting IP forn dhcp server

I have a 2504 WLC and 1042 ap's. Everything worked great in my test enviroment (of course). Now when I want to deploy the wireless, the ap's are not getting and ip for the windows dhcp server.
I have option 43 configured in dhcp, sub option 241>ip address of the controller
I have my A record in dns, cisco-capwap-controller.
*Mar 1 00:03:17.050: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
Not in Bound state.
*Mar 1 00:03:27.050: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:03:27.054: %CAPWAP-3-DHCP_RENEW: Could not discover WLC using DHCP IP. Renewing DHCP IP.
*Mar 1 00:03:37.054: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:03:47.054: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:03:57.054: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
*Mar 1 00:04:07.054: %CAPWAP-3-ERRORLOG: Not sending discovery request AP does not have an Ip !!
Not in Bound state.
TIA,
Eric

Hello Eric,
As per your query i can suggest you the following solution-
You need to connect the AP with the switch for power. The dhcp proxy is really not needed. Another thing you can do is unplug the WLC from your switch, then make sure your APs are clean (wiped) then plug the APs into the switch and console into one of them and watch the boot up process to make sure that they are at least requesting an IP address. If they can request an IP successfully then your dhcp problem has something to do with how you have your WLC set up.
Hope this will help you.

SRW2024 not getting IP from dhcp

Hi,
I'm have installed a SRW2024 switch in my home office. I've connected via hyperterminal and changed the ip address mode to "dhcp client". But i'm not getting an ip address from the dhcp server.
Is there something else I must do or setup on the switch? the DHCP server has been running without problem for some time now, all my other devices can get an ip without problems...
Thanks,
Koen

Khan,
The problem of users not getting IP from the DHCP usually happens when 'spanning-tree portfast' is not enabled on access ports. PCs don't wait long enough for DHCP responses and time out.
Can you make sure all the access ports, to which the users are connected to, have spanning tree portfast enabled.
HTH,
Sundar

LAN was down ie Users are not getting ip from DHCP server after enabling DHCP snooping

Hi All ,
Enclosed file has network connectivity diagram.
1. L3 vlan's ie 2,3,4,5 and 6 are configured on ACC-CR1 and ACC-CR2.
2.Trunk is configured between Core switches ( CR1 and CR2) and access switches .VTP mode is transparent on all switches.L2 vlans are configured on all access switches.
3.DHCP is server is located at different location and is reachable over MPLS.
Without enabling dhcp snooping , users connected to access switches (Sw1,sw2,sw3 and Sw4 ) are getting ip address from DHCP server without any problem and everything is working fine.
But users connected to Sw3 and Sw4 are getting ip address from rouge DHCP server which is not pingable from any one of the switch.
So we have configured DHCP snooping for all vlan's on CR1 , CR2 , SW3 and SW4 and "trusted uplink ports" which are connected to WAN routers from CR1 and CR2 and also "trusted uplink ports " of Sw3 and Sw4 which are connected to CR1 and CR2.
As soon we have enabled DHCP snooping and trusted respective uplink ports , users are not getting ip address from remote DHCP server and even users connected to Sw1 and SW2 are facing same issue.
Note : DHCP snooping is not configured on SW1 and SW2.
Why users are not getting ip address from remote DHCP server as soon as we enabled dhcp snooping on Core switches and two access switches ie sw3 and sw4 ? what could have caused DHCP packets to be dropped ? Any idea would be appreciated .

Hi,
as you say: " HSRP is configured between CR1 and CR2 and Vlans are active on CR1" does it mean there are L3 intrefaces configured in each VLAN on your CR switches and ip hepler-address pointing to the remote DHCP server is configured on each of them?
I know it's difficult in a productive environment but IMHO you need to find out where are the DHCP offers dropped.
Either by enabling DHCP debugging or by capturing packets via Wireshark, e.g.
Best regards,
Milan

Remittance Advice not getting triggered via F110

Hi all,
I am trying to generate the Remittance advice form via F110, But the form is not getting triggered.
The form name is maintained in the FBZP Paying company codes config.
I have maintained the vairant for the F110 run. The log does not show any errors once i run the Printout.
I am able to generate the form when use program RFFOAVIS_FPAYM in SE38 with the same variant.
Could anyone tell me how to generate the form directly from F110?
Regards,
M.G

Q1: I am getting the same issue with RFFOAVIS. I am able to print the remittance advice via se38, but not from F110. What did you do to fix the problem.
Q2: I created vendor in a comp code and run F110 and then RFFOAVIS to print the remittance - it was in a different format, but when I extended the vendor to another company code and run F110 and RFFOAVIS, the layout was different
Q3: The address on the bottom of the remittance advice is wrong. Expected address is the company code result. Please advice
Thanks

Chars & kf's related to virtual cube not get updated via multiprovider

Hi Friends,
              I've got one multiprovder, which has got two infocubes, one is 0CFM_C10 & ZRATES, in these one is basic infocube and the other one is virtual cube. So i've built the query on multiprovder which gets data from two infocubes basic and virtual, but when i'm trying to restrict in the query, the chars & kf's which are related to virtual infocube are not getting data, but the chars related to basic infocube getting data.
               NOTE: i've checked virtual cube by choosing the "display data" option, here it is showing, bt via multiprovder it's getting updated, even i can't see the data for those chars in multiprovder also using "display data" option,
what would be the problem? why virutal cube data isn't getting updated?
any idea's
awaiting for your responce

Hi Siggi,
        Thanx for your replay, actually the chars & kf's related to virtualcube are not in basic cube know! and also the query requirement is to get data from two cubes, i think in that case, not required to restrict at infocube level using 0infoprovider,
             i can be able to see the data in virtual cube, but it's getting vir multiprovider, the assignment in multiprovider is right,
then what would be the problem?
Regards,
BalajiReddy

PDF attachment not getting sent via email. This occurs intermittently.

Hi All,
There is a concurrent program which sends report on Purchase Orders. The report is sent as a PDF attachment via email.
The report is getting attached sometimes and not getting attached sometimes giving an empty email. Checked the log files and output files of the program and couldnt find any issue. There is no specific time/PO/vendor pattern wherein the program fails.
Please let me know what needs to be done to get this resolved.
Regards,
Radhika.

Hi,
I am facing this issue with Oracle 11i - US Purchasing SuperUser responsiblity.
There is a concurrent program which generates a report and then sends the report to printer. The report is not getting stored in a temp file in any directory. It is directly emailed as a PDF attachment.
Sometimes the attachment is getting sent while sometimes it is not getting attached.
Please let me know if any other information is required.
Regards,
Radhika.

Not getting IP from DHCP on 2950

Dear all,
access switch is connected to base switch and base switch is connected to DHCP server, however users are connected to access switch are not getting IP address. Hence i would like to know the solution from experts.
I remember there is a command in CATOS "set port host" by this way we can enhance port to get IP quickly..if there is any command similiar in IOS?
Your assistance will be highly appreciated.
Regards,
Khan.

Khan,
The problem of users not getting IP from the DHCP usually happens when 'spanning-tree portfast' is not enabled on access ports. PCs don't wait long enough for DHCP responses and time out.
Can you make sure all the access ports, to which the users are connected to, have spanning tree portfast enabled.
HTH,
Sundar

Infotype 1000, Position data IDOC is not getting created via RBDMIDOC

Hi All,
We are using PFAL styandard HRMD_A message type, while executing RBDMIDOC with message type HRMD_A, all the infotypes data IDOC is created except Infotype 1000 Position(S).
The same is (Infotype 1000, position IDOC is created in dev server) but the same is not getting created in Quality and Prod.
Can any one suggest the same, what could be the error.
Thanks.

Hi,
You need to check in your filter settings in BD64 for your corresponding distribution model, if you have included IT1000 for PD objects such as O, C, S. After adding this filter group, you have to distribute the source system into the target system (Edit > Model view> distribute). In the target system, you have to generate partner profiles (environment> generate partner profiles).
Hope it helps,
Christine

Virtual Machines not getting IP from DHCP via Wireless ?

Hi
I have VMware Workstation and i have connected my virtual machines in bridged mode.
With Bridge mode, none of my virtual machines are getting IP Address from my DHCP server. I am connected Wireless. My Router firewall is also off.
I am using Windows 8 and Workstation 10.
Any help will be appreciated.!

Hi sunzeal,
Is there another router connected to the Linksys E900? Can you tell us more information about your network set up? Please make sure as well that the router's firmware is up to date.
Help, learn and share

SRM: Sourcing - PO not getting created via sourcing

Dear SRM-ers,
I am facing problems while creating PO in the backend system via the sourcing cockpit.
My scenario is that when an approver SC enters the Sourcing cockpit, the user should be able to assign a vendor and proceed with creating a PO in the backend (without the bidding process).
When i click on the Create PO option i get an error, that 'some documents could not be generated or contain errors.'
Similarly in the application monitors the error is   "Shopping cart 1100000204 (PO 7000000055): BBP_BD 002 An exception has occurred"
When i try to debug this via bbp_pd transaction, the details that seem fishy to me are:
SRM          Purchase Requisition Document Type
BUS2012          Follow-On Document Object Type in Backend Sy
7000000055     Follow-On Document Object ID in Backend
The BUS2012 is a object ID of PO and the Document type that is getting populated is for PR (does this even matter?).
However, my current configuration is
SRM PR type (backend), SRM (PO type backend), and SRM BSA value.
PR
Number ranges 70 700000000-799999999 internal --> SRM
                       70 700000000-799999999 external --> Backend
PO
Number ranges 70 700000000-799999999 internal --> SRM
                       70     7000000000     7499999999 --> Backend for SRM PO
                        75     7500000000     7599999999 --> Backend for ECPO
Define Objects in Backend System:
50000006     *     QAS600     3 Always external procurement     2 Purchase order if item data complete, otherwise purch. req.
Sourcing for Product categories:
30WLDC001     QAS600     3 Sourcing Carried Out for Items Without Assd Source of Supply
This is the category i am mkaing the Shopping cart for.
Warm regards.
Osayed Rehman

Hi
Again I am telling you have configured
Sourcing for Product categories:
30WLDC001 QAS600 3 Sourcing Carried Out for Items Without Assd Source of Supply
that is why P.O is created
SPRO path-SRM server-Sourcing for product categories
Please change to Sourcing never carrired out (or ) change according to your scenario.and try
Regards
G.Ganesh Kumar

Wireless on 1811W not getting IP via DHCP

Similar Messages

Maybe you are looking for