Wireless on M1330.[Solved]

Hi!
hwdetect --show-net
NET : tg3 bluetooth mac80211 rfkill iwl4965 iwlcore cfg80211
iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
wmaster0 no wireless extentions.
wlan0 IEEE 802.11 ESSID:""
Mode:Managed Frequency:2.412 GHz Acess Point: Not-associated
Tx-Power=0 dBm
Retry min limit:7 RTS thr:off Fragment thr=2352 B
Encryption key:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
ifconfig wlan0 up
SIOCSIFFLAGS: No such file or directory
Any ideas?
Nevermind; I'm an idiot who can't read directions.
Last edited by Blice (2008-08-26 09:52:17)

Well it looks like you helped at least one person with this: me!
Thanks, I have a Dell Inspiron 1721 laptop with a Broadcom 4312 802.11a/b/g wireless card and after putting pretty much the same thing you did in my /etc/rc.conf I still had no internet.
Luckily your /etc/rc.d/network line fixed it for me.
I'm putting a link to this thread on my thread about my laptop, so hopefully more people can use them.
Thanks again.
I guess for whatever reason I'll link to that thread here, since it was wireless card related:
http://bbs.archlinux.org/viewtopic.php?id=67051
Last edited by The Avatar of Time (2009-03-10 00:49:08)

Similar Messages

Networkmanager wireless stopped working [SOLVED]

I'm not sure what happened, but within the last week or two networkmanager decided to stop working with wireless networks - I use knetworkmanager-svn primarily so that's where I first noticed the problem. When trying to connect to my home WEP-protected network (haven't tried with non-WEP yet), it immediately flashes a message - and I mean flash, it's up for milliseconds - and then returns to the disconnected icon. With the gnome applet it similarly fails - the rotating blue icon and then the disconnected icon. I have no idea why these aren't working, although I assume it's something underneath the frontends as both of the applets fail. There hasn't been a recent update to networkmanager, so perhaps it's the latest wireless_tools package. I'll check on that and report the results.
As of 5/18/07, my system is i686 and completely up-to-date (non-testing).
Thanks for any help on this issue!
Nick
Edit: As for the [SOLVED] tag - I'm not sure what I did, but after reordering my DAEMONS line and commencting everything in /etc/conf.d/wireless, it started working! Networkmanager is awfully finicky...
Last edited by Shirakawasuna (2007-05-19 06:27:14)

hahahaha
why it happened to me and I figured the problem out in less than a second?
Try this: blacklist ath5k and load ath_pci
something like this.
/etc/rc.conf
MODULES=(!pcspkr !ath5k ath_pci loop fuse)
Got it?
See ya.
Last edited by kjon (2008-06-16 02:59:26)

VISTA & WIRELESS : HOW TO SOLVE LOCAL ACCESS ONLY?

Thank you for your reading and possible answer(s),
UNABLE TO GET "LOCAL AND INTERNET ACCESS" UNDER VISTA, WHILE IT WAS POSSIBLE UNDER XP
I used to get connected "home-like" with XP to a "secondary wireless router" (SSID: Wlancomtrend - no authentication needed, no work group, signal strength: Excellent), which gets the internet signal from a "main wireless router", plugged to the DSL line (SSID: Wireless - no authenticatin needed, no work group, signal strength: Good / Low).
I am not the administrator of these routers. I used to get DNS automatically under TCPIP properties.
VISTA DOESN'T LET ME ACCESS THE INTERNET, THOUGH I MANAGE TO CONNECT TO THE SAME ROUTER
It says: "Access: local only"; and under Network and sharing center it says "unidentified network". I gess I'm a bit unfamiliar with this OS and do not master all its settings. I also marked off security essentials like Firewall under Windows security center, to prevent any possible internet access blocking. My laptop power plan is also set to "High performance".
- I suspect my ID network is not well configured. Under System properties (right click on the "My computer icon") > Computer name > network ID > Join a Domain or Workgroup: I'm trying to keep the "This is a home computer" setting, but it goes back to "This computer is part of a business network" all the time, even after reboot. How to fix this, by the way?
- Under Network and Sharing center > Customize the current connection > location type > i set it to "public".
Other factors maybe irrelevant: / Sharing discovery > Network discovery: "On" / > file sharing: "On".
I get DNS automatically under TCPIP properties (as with XP).
A couple of days ago, VISTA managed to get internet with the "main wireless router" (SSID: Wireless - no authentication needed, signal strength: Good / Low). I just tried to set ID network to "This is a home computer" and rebooted. Under the network window, I also tried to tick a network location or workgroup. This may not be important, though.
I STILL JUST GET LOCAL ACCESS ONLY WITH MY WIRELESS CONNECTION UNDER VISTA
Any help? Molta mercé / Many thanks
Also tried:
- Automatically Detect Settings checked in internet options
- Obtain an IP address automatically under TCPIP properties
- Enable DHCP
- Disable User Account Control in Security Center
- Disable most of the Vista security stuff
- Remove and set up all connections
- IPv6 off
- etc.
Google Occitan www.google.com/intl/oc/ | http://www.eurominority.org/documents/cartes/occitania.gif

Well, I have been thoroughly frustrated by this networking problem in Vista. What is so INSIDIOUS about it, is that it can happen spontaneously/periodically. When it first started happening, I could go for hours with
no problems. And then all of the sudden, it's "LOCAL ACCESS ONLY." I'd even lose my Internet connection completely, but then it would come back momentarily. Lately though, the problem got worse. It would happen every 5-10 minutes.
What really drove me nuts originally is that I had set up a new wireless router: a TP-Link TL-WR941N. Very nice and powerful. It can reach up 3 stories in a multi-story home. I have my computer up on the 3rd floor. My Internet
connection was no problem... for MONTHS. And then, all of the sudden, this "LOCAL ACCESS ONLY" problem started cropping up. My network connection would change to this, then after a few moments, go back to "LOCAL AND INTERNET".
I figured it was some kind of "momentary atmospheric problem". But no. It continued on, for days and days after it had started. Why? Why would this start happening when nothing else had changed?
Ah, but that's where I was amiss. You see, Vista gets updated frequently by the powers that be at Microsoft. And who knows what things they really do? You don't get a full report. You just keep getting "important security updates".
Well, I suspect that at some point, they introduced some changes which affect the networking capability of Vista. And so, since that point, you'll have periodic problems as I have.
Microsoft is so focused on Windows-7, that they really can't be bothered with Vista. AND... I really wonder if they leave defects like this around to give incentive for people to upgrade to Windows-7. I wouldn't put it past them.
Well, the main thing is that each person's situation is different. Some people have 3rd party software that is tripping it up (like Norton or McAfee). I think a lot of the problem depends upon the type of wireless router you're connected with
and the type of network (e.g. G vs. N). So that's why some fixes proposed solve the problem while others do nothing.
If you try any settings changes, I strongly recommend that you do them one at a time. Also, keep note of what you've applied. It is important to be able to roll back those changes if need be.
So, this was the first friendly user tip that helped me:
Over the course of several days, I made only one change at a time, then waited to see if the failure occurred again. I'm an IT networking professional so I based my decisions on my familiarity with network protocols, impact, risk, ease of
implementation and fallback positions.
These are the steps I took:
1. Installed Teracopy, which takes over the file copying function of Windows.
http://www.codesector.com/teracopy.php
2. Disabled IPv6 (Control Panel -> Network Connections -> <your connection> -> Properties)
3. Disabled Link Layer Topology Discovery Mapper and Responder (Control Panel -> Network Connections -> <your connection> -> Properties)
4. Set Power settings to high performance (Control Panel -> Power Options) and disabled the screensaver (Control Panel -> Personalization -> Screen Saver)
5. Reduced my Linksys router's MTU to 1480 (although I doubt this was part of the solution)
6. Enabled ECN with the following command "netsh interface tcp set global ecncapability=enabled" from command line (Start -> cmd)
http://technet.microsoft.com/en-us/library/bb726965.aspx
Possibly step 6 is all you really need to do. Please post if this works for you.
Well, I figured I'd give step #6 a shot. Why not? There are a few other command line settings recommended, but I decided to try it alone first:
   netsh interface tcp set global ecncapability=enabled
At first, this seemed to be the only thing I needed to do. My "LOCAL ACCESS ONLY" problem seemed to stop happening, observed over a 20 minute period. It happened again for a moment, but then Internet Access returned right away. I thought
the problem was solved... But then "LOCAL ACCESS ONLY" came back and stayed. I had to run these commands as well:
   netsh interface tcp set global autotuninglevel=disabled
   netsh interface tcp set global rss=disabled
This WORKED! I seem to sustain my Internet connection for much longer periods. LOCAL ACCESS ONLY does pop up sometimes, but it is very brief. I think it's something to do with my router going into "sleep mode" on the
connection. If I try to make a connection to a website, it comes back to life and I have Internet Access again.
LASTLY...
There is one other thing I want to mention, in case someone else reading this has the same problem.
One day after a severe storm that caused a power outage, I started getting "LOCAL ACCESS ONLY." The wireless router was there and I'd connect to it, but no Internet. I connected directly to it, hardwired, and STILL had the same problem. I
rebooted the router, the cable modem, you name it. Same problem. Being directly connected to the cable modem was fine. Did my router get fried from a power surge during the storm? It seemed perfectly fine in all other respects. I
eventually contacted the TP-LINK customer support. I learned something new... the problem was with the IP ADDRESS of the router conflicting with the cable modem.
By default, your wireless router will take IP address 192.168.1.1. In some cases, this will be a problem if the cable modem is taking the same IP address
and is finicky about the address of the wireless router. It was fine for almost 6 months... why did it become a problem all of the sudden? Bizarre. Suspicion was that the ISP changed some things (they remotely reprogram
the modems from time to time, you know). The solution? Give the wireless router a different address (e.g. 192.168.2.1). It worked!  I was able to get Internet access after that. Worked fine for several months,
too... until I started getting that periodic "LOCAL ACCESS ONLY" again. But the solution above seems to have addressed it.
Good luck to those having problems. I sure wish Microsoft would be more dedicated to its customer base. But thankfully we've got forums like this which bring people together to help solve each others problems. :-)

Dynamic WEP Wireless Network (University) [SOLVED]

I for some reason am having the hardest time connecting to my universities wifi. It sees the network, and the signal strength is plenty, however whenever I try to connect to it...it tries and tries then just fails.
It's encrypted by Dynamic WEP with PEAP MSCHAPv2
We're supposed to put in our username and password for the university's system, but it just won't work.
I'm using NetworkManager, and it works great everywhere else...just for some reason it hates connecting to their network.
Any help would be appreciated, thank you!
Last edited by MeathooK (2010-08-19 04:19:30)

Solved my own problem...did quite a bit of reading last night and it seems like NetworkManager still has trouble connecting to these types of networks, and the only way to get it to work correctly is by using wpa_supplicant...which is what I did. Here's my wpa_supplicant.conf
network={
ssid="wtamu-student-wireless"
key_mgmt=IEEE8021X
eap=PEAP
phase2="auth=MSCHAPV2"
identity="username"
password="password"
Maybe this'll help somebody later on!

AirPort Extreme conection cuts out! Wireless Connection problems, Solved!?

If you are having the same problem I was with not being able to stay connected wireless to internet using OS X 10.5.6 and Airport....
Try this......
Fingers Crossed its working! For now 3 days and still going.
Open Airport Utility
when your base station shows up ( good luck it kept vanishing when I did this )
in Manual Setup / Summary
Wireless mode > access > MAC Address Access Control Local
(set up every devise you want to connect to - Wireless clients gives you the codes)
Wireless options > (tick) Create a closed network and Use interference robustness
Hope this works for you all too and keeps Working!

FYI we aren't the only ones with this issue. Check out this thread:
http://discussions.apple.com/thread.jspa?messageID=8577849&#8577849
I have the EXACT same problem, intermittent bars, click on the network name and you get brief connectivity, and - perhaps most importantly -- this only really started in the last 4 - 6 weeks or so. There must have been some weird update back in November/December.
Unfortunately Apple is doing it's usual thing: No response.

Wireless connection problems (SOLVED)

Seems to randomly work now, thanks
Yesterday I was doing normal things on the web and suddenly the airport logo went blank, connection is gone. Strange, so I try a few things:
- messing with Network Preferences, which after manually trying to connect to my router (it won't do it automatically) I can get 5 bars, but still no connection
(there is a 4-5 step process, and at the end when it asks if there's a router or firewall between my connection and to restart my router, it never gets past that part)
- restarting router multiple times, restoring factory settings. Neither works, and all other devices in the house can still connect to router. Also tried to update firmware. It's a Belkin router.
- my wireless can detect routers, it picked up my neighbor's, it just can't connect.
- did a virus scan with Norton, nothing detected
- I restart on Bootcamp with Win XP and I can connect right away to the router!!
[steps I might try next: hauling my Mac Pro to my friend's house and see if it can connect wirelessly, or trying to connect via ethernet and update Mac OS (I have the latest version but missed one update)]
So I'm dumbfounded, is it a software or Mac OS problem?
Thank you
Message was edited by: stevetobias

thanks for the answers!
hokasch wrote:https://bbs.archlinux.org/viewtopic.php?id=102212
my kernel is 2.6.33-ARCH, so it's older than the one they're talkin in the post
lifeafter2am wrote:Easiest way to see if the card is working is to use iwconfig
this is waht i get but i don't know how to interpret it:
wlan0 IEEE 802.11bg Mode:Managed Access point: Not-associated
Tx-power=20 dBm
Retry long limit: 7 RTS thr:off Fragment thr:off
Power management:off
Does this mean it's working? if so, what should i do next?
Last edited by shapacko (2010-08-10 17:30:19)

MacBook no longer able to print wirelessly?

Hello
I have an issue that I can't seem to come up with a reason for or a resolution. I apologize in advance for the length of this posting.
We have a Dell Laptop that is connected wirelessly to a Brother MFC-420CN printer. We have a Linksys Router. Previously, we'd also had been connected wirelessly to the same printer and our MacBook. The Mac was connected to the printer through an Internet/IPP connection, using the IP address. We had no trouble printing from the Mac.
On Christmas, the Mac stopped printing wirelessly to the printer. We got the message "Failed to connect to device." We tried re-installing, etc, and finally went out and bought a USB/printer cable and connected hardwire Mac to printer, and after that, it again printed wirelessly.
Problem solved, right?
Now, its happened again, but we cannot get the Mac and the printer to talk to each other. Each time we try, we get the same message "Failed to connect to device" but nothing has changed! This has happened literally overnight, one night it prints wirelessly, the next day it doesn't. Even connecting hardwire between the Mac & printer does not help this time. We've tried everything we can think of.
No issues w/the PC and printer at all.
Additional info: The PC and the Mac are NOT networked w/each other. Also, when we enter in the original IP address under the Mac printer installation, it immediately identifies the printer as the MFC-420CN, however, this is NOT the same IP address as on the Linksys router, but if we put in the IP address on the router, it no longer recognizes the printer.Printer sharing is enabled on the PC, although it wasn't previously. We can print hardwire from the Mac. Finally, the router and the Mac work fine wirelessly for the internet.
We're literally at a loss. It worked fine, then overnight, it doesn't.
Any help or suggestions would be appreciated! I am a new Mac user so please bear with me!
Mac Book Pro Mac OS X (10.4.8)

Hello
We weren't using that method to add the printer, however, we did try using both the original IP address as well as the one we see when we open the router properties, and still no luck.
Does the printer have its on IP address? Separate from the router IP address? If so, how would we find it?
Thanks
Mac Book Pro Mac OS X (10.4.8)
Message was edited by: Pdlhed

Unable to access wireless connection with linksys rooter WRT54GS

Hi,
I just installed a wireless rooter Linksys WRT54GS on my connection, The problem I have is being able to access it with my wireless on my laptop.
I kept getting a message stating "connection unindentified" "access limited". I've done most of what is already suggested on your forum such has turning the power off of my rooter, my modem and such and still nothing. I'm able to access the wireless with my girlfriend Mac Notebook, my playstation 3 and my desktop computer which uses Windows X. First I thought that it my be a problem with my security but even when the connection is unprotected I still get that error. I try to disable the IpV6but that didn'tdo anything either.
My laptop is a Toshiba Qosmio X300 PQX32C-033019 with Vista and my rooter is a Linksys WRT54GS vers. 6
Here's my connection log, sorry if it's in French:
Informations sur l'ordinateur
Vendor:TOSHIBA
Machine Name:Qosmio X300
VersionQX32C-033019
CPU Maker:GenuineIntel
CPU Name:Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz
CPU Clock:2267
CPU Base Clock:2267
OS:Microsoft® Windows Vista™ Édition Familiale Premium
OS Build:6001
OS SPervice Pack 1
Ram:4188120
Début de la page
Informations IP
ipconfig /all
Configuration IP de Windows
Nom de l'h“te . . . . . . . . . . : PC-de-ThomasMur
Suffixe DNS principal . . . . . . :
Type de noeud. . . . . . . . . . : Mixte
Routage IP activ‚ . . . . . . . . : Non
Proxy WINS activ‚ . . . . . . . . : Non
Liste de recherche du suffixe DNS.: phub.net.cable.rogers.com
Carte r‚seau sans fil Connexion r‚seau sans filÿ:
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Intel(R) Wireless WiFi Link 5100
Adresse physique . . . . . . . . . . . : 00-21-5D-3D-9C-08
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::a9d9:4618:2ae4:d7e5%11(pr‚f‚r‚)
Adresse d'autoconfiguration IPv4 . . . : 169.254.215.229(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.0.0
Passerelle par d‚faut. . . .ÿ. . . . . :
Serveurs DNS. . . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Ethernet Connexion au r‚seau local :
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Adresse physique . . . . . . . . . . . : 00-1E-EC-3F-7B-CF
DHCP activ‚. . . . . . . . . . . . . . : Oui
Configuration automatique activ‚e. . . : Oui
Adresse IPv6 de liaison locale. . : fe80::4da:b21b:843c:7bfd%10(pr‚f‚r‚)
Adresse IPv4. . . . . . . . . . . : 192.168.1.100(pr‚f‚r‚)
Masque de sous-r‚seau. . . .ÿ. . . . . : 255.255.255.0
Bail obtenu. . . . . . . . .ÿ. . . . . : 8 juin 2009 18:11:58
Bail expirant. . . . . . . . .ÿ. . . . : 9 juin 2009 18:11:58
Passerelle par d‚faut. . . .ÿ. . . . . : 192.168.1.1
Serveur DHCP . . . . . . . . . . . . . : 192.168.1.1
Serveurs DNS. . . . . . . . . . . . . : 64.71.255.198
NetBIOS sur Tcpip. . . . . . . . . . . : Activ‚
Carte Tunnel Connexion au r‚seau local* :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . : phub.net.cable.rogers.com
Description. . . . . . . . . . . . . . : isatap.phub.net.cable.rogers.com
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Carte Tunnel Connexion au r‚seau local* 6 :
Statut du m‚dia. . . . . . . . . . . . : M‚dia d‚connect‚
Suffixe DNS propre … la connexion. . . :
Description. . . . . . . . . . . . . . : Carte Microsoft ISATAP #2
Adresse physique . . . . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP activ‚. . . . . . . . . . . . . . : Non
Configuration automatique activ‚e. . . : Oui
Début de la page Informations de routage
route print
===========================================================================
Liste d'Interfaces
11 ...00 21 5d 3d 9c 08 ...... Intel(R) Wireless WiFi Link 5100
10 ...00 1e ec 3f 7b cf ...... Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
1 ........................... Software Loopback Interface 1
13 ...00 00 00 00 00 00 00 e0 isatap.phub.net.cable.rogers.com
12 ...00 00 00 00 00 00 00 e0 Carte Microsoft ISATAP #2
===========================================================================
IPv4 Table de routage
===========================================================================
Itin‚raires actifsÿ:
Destination r‚seau Masque r‚seau Adr. passerelle Adr. interface M‚trique
0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.100 20
127.0.0.0 255.0.0.0 On-link 127.0.0.1 306
127.0.0.1 255.255.255.255 On-link 127.0.0.1 306
127.255.255.255 255.255.255.255 On-link 127.0.0.1 306
169.254.0.0 255.255.0.0 On-link 169.254.215.229 281
169.254.215.229 255.255.255.255 On-link 169.254.215.229 281
169.254.255.255 255.255.255.255 On-link 169.254.215.229 281
192.168.1.0 255.255.255.0 On-link 192.168.1.100 276
192.168.1.100 255.255.255.255 On-link 192.168.1.100 276
192.168.1.255 255.255.255.255 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 127.0.0.1 306
224.0.0.0 240.0.0.0 On-link 192.168.1.100 276
224.0.0.0 240.0.0.0 On-link 169.254.215.229 281
255.255.255.255 255.255.255.255 On-link 127.0.0.1 306
255.255.255.255 255.255.255.255 On-link 192.168.1.100 276
255.255.255.255 255.255.255.255 On-link 169.254.215.229 281
===========================================================================
Itin‚raires persistantsÿ:
Aucun
IPv6 Table de routage
===========================================================================
Itin‚raires actifsÿ:
If Metric Network Destination Gateway
1 306 ::1/128 On-link
10 276 fe80::/64 On-link
11 281 fe80::/64 On-link
10 276 fe80::4da:b21b:843c:7bfd/128
On-link
11 281 fe80::a9d9:4618:2ae4:d7e5/128
On-link
1 306 ff00::/8 On-link
10 276 ff00::/8 On-link
11 281 ff00::/8 On-link
===========================================================================
Itin‚raires persistantsÿ:
Aucun
Début de la page Informations de protocole
Protocol Bind Information
SSTP based VPN
Microsoft TCP/IP version 6 - Tunnels
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Internet Protocol (TCP/IP) - Tunnels
Microsoft NetbiosSmb
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IP ARP Driver
Miniport WAN (IP)
Message-oriented TCP/IP Protocol (SMB session)
WINS Client(TCP/IP) Protocol
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 4 (TCP/IPv4)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
Internet Protocol Version 6 (TCP/IPv6)
isatap.phub.net.cable.rogers.com
Internet Protocol Version 6 (TCP/IPv6)
Intel(R) Wireless WiFi Link 5100
Internet Protocol Version 6 (TCP/IPv6)
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 6 (TCP/IPv6)
isatap.{DF6498ED-F5F7-4E96-9496-10C8BB95FA20}
isatap.phub.net.cable.rogers.com
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Internet Protocol Version 4 (TCP/IPv4)
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Remote Access IPv6 ARP Driver
Miniport réseau étendu WAN (IPv6)
Point to Point Protocol Over Ethernet
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Point to Point Tunneling Protocol
Layer 2 Tunneling Protocol
Remote Access NDIS WAN Driver
WAN Miniport (SSTP)
Carte asynchrone RAS
Miniport WAN (PPPOE)
Miniport réseau étendu WAN (PPTP)
Miniport réseau étendu WAN (L2TP)
Link-Layer Topology Discovery Mapper I/O Driver
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Link-Layer Topology Discovery Responder
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
NDIS Usermode I/O Protocol
Intel(R) Wireless WiFi Link 5100
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Début de la page Informations sur les équipements
Realtek RTL8168C/8111C Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
Device ID : PCI\VEN_10EC&DEV_8168&SUBSYS_FF001179&REV_02\4&492937F&0&00E2
Status : Enable
Driver Vender : Realtek
Driver Version : 6.205.403.2008
Driver Date : 4-3-2008
Intel(R) Wireless WiFi Link 5100
Device ID : PCI\VEN_8086&DEV_4232&SUBSYS_12018086&REV_00\4&3905AE0C&0&00E3
Status : Enable
Driver Vender : Intel
Driver Version : 12.0.0.73
Driver Date : 4-27-2008
Bluetooth
Device ID : ACPI\TOS6205\5&F592293&0
Status : Disable
Bluetooth Version : v6.10.07.2(T)
Début de la page Statut du commutateur de communications sans fil et de la touche d'accès direct pour réseau sans fil
Wireless Communication Switch : On
Wireless Hotkey (Fn + F8)
Wireless LAN : On
Solved!
Go to Solution.

Try this -
Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...
Leave username blank & in password use admin in lower case...
For Wireless Settings, please do the following : -
Click on the Wireless tab
- Here select manual configuration...Wireless Network mode should be mixed...
- Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
- Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
For Wireless Security : -
Click on the Sub tab under Wireless > Wireless Security...
Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...
Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...
Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
Click on Advanced Wireless Settings
Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
On your Vista Laptop, first disable the Wireless Network Connection and restart the Laptop, then Enable the Wireless Connection...
Then Click on Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Network and click on Add, select Manually Create a Network Profile and click Next, enter your Network SSID/Network Name, select WEP for Security type and enter your 10 digit Network Key and click on Next, it should say "Successfully Connected to ____" close all the Windows and restart the Laptop, now see if you can connect to Internet Wirelessly...

Is there a way to password protect guess access to wireless on an E2000 router?

I'd like to set up guest access to my E2000 router, but only for a few friends, not my entire neighborhood. When I set everything up originally through Cisco Connect, I was able to set up a guest account with a password, but it's showing up in my wireless listing as unsecured--you don't need the password to access it. Is there a way to password protect the guest wireless access?
Solved!
Go to Solution.

Yes it does appear to be unsecured, but to be able to surf you need the password that Cisco Connect generates.
So No it's not open, but I think they are still connected to the router, and thats not good either.

PIXMA 6320 has started to lose wireless connection.

When power is recycled, the printer always prints what is in queue but physically recycling power obviates the point of having a wireless device.
Solved!
Go to Solution.

Hi dmmitch12!
Welcome to the Canon Forums and thanks for your post!
To have a better understanding of your issue, please let everyone know what operating system (Windows Vista/7/8 or Mac OS 10.X). That way, the community will be able to assist you with suggestions appropriate for your product.
Any other details you'd like to give will only help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks!

Wireless adapters.

I have a question and would appreciate any feedback. I have a laptop computer and recently bought a wireless router. I completed the setup for the router but still can only access the Internet through my old modem and an ethernet cable. Do I need a wireless adapter in addition to my wireless router?
Solved!
Go to Solution.

I've had that quite a few times myself. A router and computer reboot (router first, test, then computer if no good) typically works (just like mentioned in previous post).
I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
: Open Mailbox

Wireless Connection drops after a few moments

Hello everbody!
Background: I have a cheap laptop with a windows only ACPI module, so I have to set acpi=off at all times anyway. I tried Ubuntu, which has the wireless problem too, but instead of repairing something bloated like Ubuntu, I now found my way to Arch to make it right from the beginning.
If the wireless problem gets solved, I want to go on installing the nvdia driver, maybe configure xmonad. (I want to try KDE4 for fun too though, eyecandy you know ) Simple working desktop without getting my laptop heated up like windows does.
The problem: I set up my wireless connection like the wiki says:
-The original SSID was "FRITZ!Box Fon WLAN 7270 Annex A" which I tried to escape with \ and using 'ssid'. This wouldn't work at all, if you have any explanation for that I'd love to know it. I changed the SSID to something without spaces and special characters and the connection would work. But it would be nice to change it back to the original.
-So it works now. Fine, I thought. But the connection drops after a few moments and I have to "killall wpa_supplicant dhcpcd" and start them again to make it work again. For a few moments only. So I went through the logfiles and found error messages which Google wouldn't help me solve on my own. Now I'm asking the Arch specialists here
Note: Using the partedmagic livecd, the wireless connection works out of the box and absolutely stable. I believe even a bit faster than under windows. So it has to work perfectly, I just don't know how to make it in Arch yet.
Wireless encryption: WPA2 (CCMP)
lspci | grep -i net
00:0a.0 Ethernet controller: nVidia Corporation MCP79 Ethernet (rev b1)
05:00.0 Network controller: Ralink corp. RT2860
wpa_supplicant.conf
ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=wheel
network={
ssid="fritztest"
scan_ssid=1
proto=RSN
key_mgmt=WPA-PSK
pairwise=CCMP TKIP
group=CCMP TKIP
psk=Passwort
starting wpa_supplicant with -dd to show how the connection auths:
Trying to associate with ma:ca:dr:es:se:bb (SSID='fritztest' freq=2457 MHz)
Associated with ma:ca:dr:es:se:bb
WPA: Key negotiation completed with ma:ca:dr:es:se:bb [PTK=CCMP GTK=CCMP]
CTRL-EVENT-CONNECTED - Connection to ma:ca:dr:es:se:bb completed (auth) [id=0 id_str=]
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-DISCONNECTED - Disconnect event - remove keys
CTRL-EVENT-TERMINATING - signal 15 received
lsmod
Module Size Used by
usbhid 32582 0
hid 59859 1 usbhid
uvcvideo 54388 0
videodev 34611 1 uvcvideo
v4l1_compat 13478 2 uvcvideo,videodev
snd_hda_codec_realtek 186046 1
joydev 7378 0
rt2860sta 498204 0
snd_seq_dummy 1067 0
snd_seq_oss 24984 0
snd_seq_midi_event 4484 1 snd_seq_oss
snd_seq 41656 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 4349 3 snd_seq_dummy,snd_seq_oss,snd_seq
snd_pcm_oss 33442 0
snd_mixer_oss 14356 1 snd_pcm_oss
snd_hda_intel 19249 0
snd_hda_codec 59723 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4752 1 snd_hda_codec
snd_pcm 57767 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
snd_timer 15629 2 snd_seq,snd_pcm
snd 42562 11 snd_hda_codec_realtek,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
soundcore 5017 1 snd
snd_page_alloc 5873 2 snd_hda_intel,snd_pcm
ohci_hcd 19405 0
ehci_hcd 31420 0
usbcore 119796 5 usbhid,uvcvideo,ohci_hcd,ehci_hcd
i2c_nforce2 4780 0
i2c_core 14855 2 videodev,i2c_nforce2
psmouse 50729 0
shpchp 26528 0
pci_hotplug 23303 1 shpchp
sdhci_pci 5466 0
sdhci 13959 1 sdhci_pci
mmc_core 45599 1 sdhci
led_class 1997 1 sdhci
forcedeth 47287 0
serio_raw 3618 0
evdev 6716 0
pcspkr 1347 0
sg 20820 0
rtc_cmos 7546 0
rtc_core 11851 1 rtc_cmos
rtc_lib 1482 1 rtc_core
ext4 302709 1
mbcache 4278 1 ext4
jbd2 63651 1 ext4
crc16 1041 1 ext4
sd_mod 25215 3
sr_mod 13097 0
cdrom 31305 1 sr_mod
ahci 29826 2
libata 138071 1 ahci
scsi_mod 79436 4 sg,sd_mod,sr_mod,libata
rc.conf
MOD_AUTOLOAD="yes"
#MOD_BLACKLIST=() #deprecated
MODULES=(!rt2800pci !rt61pci !rt2x00pci !rt2800usb !rt2800lib !rt2x00usb !rt2x00lib)
iwconfig in the few moments the connection works
wlan0 Ralink STA ESSID:"fritztest" Nickname:"RT2860STA"
Mode:Managed Frequency=2.457 GHz Access Point: ma:ca:dr:es:se:bb
Bit Rate=54 Mb/s
RTS thr:off Fragment thr:off
Encryption key:some-key
Link Quality=96/100 Signal level:-56 dBm Noise level:-81 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
because the wiki says the driver is in the kernel, I also looked at the kernel log which has weird errors:
Jun 7 02:31:49 arch kernel: <-- RTMPAllocTxRxRingMemory, Status=0
Jun 7 02:31:49 arch kernel: 1. Phy Mode = 0
Jun 7 02:31:49 arch kernel: 2. Phy Mode = 0
Jun 7 02:31:49 arch kernel: RTMPSetPhyMode: channel is out of range, use first channel=1
Jun 7 02:31:49 arch kernel: 3. Phy Mode = 0
Jun 7 02:31:49 arch kernel: MCS Set = 00 00 00 00 00
Jun 7 02:31:49 arch kernel: <==== rt28xx_init, Status=0
Jun 7 02:31:49 arch kernel: 0x1300 = 00073200
Jun 7 02:31:55 arch kernel: ===>rt_ioctl_giwscan. 14(14) BSS returned, data->length = 2120
Jun 7 02:31:55 arch kernel: ==>rt_ioctl_siwfreq::SIOCSIWFREQ[cmd=0x8b04] (Channel=1)
Jun 7 02:32:47 arch kernel: ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1985
Jun 7 02:32:57 arch kernel: ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1985
Jun 7 02:33:07 arch kernel: ===>rt_ioctl_giwscan. 13(13) BSS returned, data->length = 1985
Jun 7 02:33:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=1!
Jun 7 02:33:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=2!
Jun 7 02:33:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=3!
Jun 7 02:33:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=4!
Jun 7 02:33:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=5!
Jun 7 02:33:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=6!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=7!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=8!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=9!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=10!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=11!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=12!
Jun 7 02:33:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=13!
Jun 7 02:33:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=14!
Jun 7 02:33:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=15!
Jun 7 02:33:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=16!
Jun 7 02:33:32 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=17!
Jun 7 02:33:32 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=18!
Jun 7 02:33:32 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=19!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=20!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=21!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=22!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=23!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=24!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=25!
Jun 7 02:33:33 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=26!
Jun 7 02:33:34 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=27!
Jun 7 02:33:34 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=28!
Jun 7 02:33:34 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=29!
Jun 7 02:33:42 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=30!
Jun 7 02:33:42 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=31!
Jun 7 02:33:42 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=32!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=33!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=34!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=35!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=36!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=37!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=38!
Jun 7 02:33:43 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=39!
Jun 7 02:33:44 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=40!
Jun 7 02:33:44 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=41!
Jun 7 02:33:44 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=42!
Jun 7 02:33:52 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=43!
Jun 7 02:33:52 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=44!
Jun 7 02:33:52 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=45!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=46!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=47!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=48!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=49!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=50!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=51!
Jun 7 02:33:53 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=52!
Jun 7 02:33:54 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=53!
Jun 7 02:33:54 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=54!
Jun 7 02:33:54 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=55!
Jun 7 02:34:02 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=56!
Jun 7 02:34:02 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=57!
Jun 7 02:34:02 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=58!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=59!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=60!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=61!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=62!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=63!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=64!
Jun 7 02:34:03 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=65!
Jun 7 02:34:04 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=66!
Jun 7 02:34:04 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=67!
Jun 7 02:34:04 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=68!
Jun 7 02:34:12 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=69!
Jun 7 02:34:12 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=70!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=71!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=72!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=73!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=74!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=75!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=76!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=77!
Jun 7 02:34:13 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=78!
Jun 7 02:34:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=79!
Jun 7 02:34:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=80!
Jun 7 02:34:14 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=81!
Jun 7 02:34:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=82!
Jun 7 02:34:22 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=83!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=84!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=85!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=86!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=87!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=88!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=89!
Jun 7 02:34:23 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=90!
Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=91!
Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=92!
Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=93!
Jun 7 02:34:24 arch kernel: Qidx(0), not enough space in MgmtRing, MgmtRingFullCount=94!
Thanks in advance to anyone helping me! I really really want to get Arch going. It's ideal for this laptop, no wasting of disk space, ressource friendly, the temperature doesn't go up as much with less cpu usage I guess..
I've written quite a bit, but hopefully this makes it easier for you to help me! I've included all I thought which could be useful.
Greetings from Germany,
Fenris

The easiest solution might be to setup NetCfg somehow with your wifi card and access point. Have you tried that? Can you find your card's chipset on the wiki?(chances are that your particular chipset will need a firmware put into /lib/firmware. Again that's found on the wiki on the NetCfg or Wifi page, I forget which sorry.) Those are two places where I'd look for good information.
By the way, your rc.conf is way out of date. You should look at updating it by using the recent rc.conf.pacnew file that you'll find in the /etc directory.

Wireless speed question

Our laptop connects to the HH with its built in wireless , connection is solid and the speeds are good , BUT im getting a max of 42mb/s and wired i get 69-72.
I realise this is due to the limitations of the built in wireless. I realise 42 mb isnt a shabby speed but we do do a fair bit of downloading on the lappy so.......
If i get belkin 150mbps dongle (play have one on offer for a tenner) will i get the full fat 70 meg down i get with wired?
I realise that on paper this looks like a daft question as to me it looks like the answer is yes ha ha but im not sure about the limitations of wireless etc.
thnaks
Solved!
Go to Solution.

archster wrote:
Our laptop connects to the HH with its built in wireless , connection is solid and the speeds are good , BUT im getting a max of 42mb/s and wired i get 69-72.
I realise this is due to the limitations of the built in wireless. I realise 42 mb isnt a shabby speed but we do do a fair bit of downloading on the lappy so.......
If i get belkin 150mbps dongle (play have one on offer for a tenner) will i get the full fat 70 meg down i get with wired?
I realise that on paper this looks like a daft question as to me it looks like the answer is yes ha ha but im not sure about the limitations of wireless etc.
thnaks
if you want (nearly) full speed, make sure the dongle is wireless N and MIMO compatible and rated up to 300mb speeds.it may be slightly more expensive, but worth it in the long term
free your computer, use opensource
i'm a linux user & very happy about it

Letters zxcv won't type on my wireless keyboard.

All of a sudden the letters zxcv won't work on my wireless keyboard.

I solved my problem by going into my iPad and not only turning off the BT, but checking "Forget this Device". That as the key thing that I hadn't been doing. Then went back to my iPhone 5, settings/bluetooth and it synced to my wireless keyboard with no problem. Thanks!

Wireless PC cards on new 17in powerbook?

I need to use an antinna on my computer to reach my access point. I know that my powerbook comes with the airport card but I live in an older RV and connect to a park wireless system. I need the external antinna becuse the wireless signal cannot penitrate the outside of my RV. I have a Buffalo pc card that I used with my PC laptop. I looked on the websight for this card and it says that it is compatable with the tiger operating system. I just cant get it to start up the card. I put the card in and the computer recognizes it but will not use it. Any help would be appreciated.
17in powerbook 1.67gh, 2gig ram Mac OS X (10.4.3)

I bought a wireless bridge to solve my problem. I also found that my computer did not ID the card correctly in the first place. I thought it was but I looked closer at what it said and found it was not. Thank you for your help though.

Wireless on M1330.[Solved]

Similar Messages

Maybe you are looking for