Wireless out of box

hello. I have been unsuccessful in getting my wifi card to work with arch & wpa (wmp45g with rt2500 driver). A roommate of mine would like to purchase my wmp54g (he runs ubuntu and it works well on that distro) and I plan on ordering a new card for myself.
What card do you guys recommend? I am looking for one that would work out-of-the-box with arch.
thanks.

You may check the hardware compatibility list on linuxquestions.org:
http://www.linuxquestions.org/hcl/index.php?cat=10
The problem is many of those hardware companies had multiple chipsets in a different revs. of the same model number and product, because of changing the chipset while they still churn out their product.
So i went with the Netgear MA311, because they have all the same chipset and work out of the box with orinoco_pci.
Benjamin.

Similar Messages

Poor IP Connectivity - Reinstalling Out of Box Config

Hi All, I started having problems yesterday with Airport and not being able to connect to the internet on my 10 day old MBP. Prior to this I had solid connections all over the house. Not sure what happened but I have seen a flood of posts on this with poor IP connectivity. My ISP is solid as I have an existing wireless network and the PC's are fine! Upgraded to 10.4.7 and same thing. I get 3 to 5 bars, fluctuates, sometimes I get on the internet, sometimes I do not. Very frustrating indeed. Reception and connectivity really went South last 36 hours or so
So I decided to reinstall the DVD restore discs so I can get it back exactly as it was out of box. I hope this won't cause any problems. I am somewhat leary now of installing any updates! Should I be? All I know is that right out of the box and for the last 10 days I had no trouble at all so hopefully I can get back to that point again.
If anyone has any feedback or comments on similar experiences, I would very much appreciate it. Many thanks
dave

Hi,
Wanted to update everyone on my experiences today regarding this issue. I first called Apple Customer Care first thing this morning and described the problem and they assigned a case number.
Then I took the unit to our local Apple Store, made an with the "genius" and after about 10 minutes in the back, he verified that there was a hardware problem of some kind with the Airport Card. They annotated this on the case number notes.
Then I called Apple Customer Support when I got home and, to be honest, I was expecting a big hassle but they took care of me and will send me an RMA label to ship the MBP back and then I will get a new unit! I just hope that the new one will not have the same problems and that it is a week 24 or higher build!
Just wanted to share with everyone that if you have a problem with your Mac, the process does work if you give it a chance. My original machine was ordered on June 6th with a delivery of June 12th, so today is the 16th day I have had it. No restocking fee! I hope this info is helpful. Thanks for reading!
dave

Creating automated email reminders to users every 2 weeks via Workflow 2010 Out of Box approach only

Hi,
I have been asked to automate the email reminders to users (every two weeks) from the SharePoint2010 solution.
I am trying to achieve this via workflow ,but am unable to get the results.
Req :
Twice a month the users should get an automated email reminder for a specific task.
1. On 14th (or last working day in mid month -1) of the month. ( a field "mid month end" captures the date as 15th of the month)
2. On last working day - 1 of the month. ( a field "month end" captures the date as last day of the month)
Please let me know how i can achieve this via Out of box functionality. I donot have exp with workflows so a detailed steps guidlines will be very helpfull.
Regards,
Guru

Although you can start a workflow and then pause it for a number of days, I'd feel uncomfortable with that. If the farm crashes, who guarantees that the paused workflows will pick up where they were left off?
SharePoint does no offer to run a workflow on all items in a list/library -- which I feel is a big draw back.
The good news is that there is a free 3rd party tool that can run a workflow on all (or specific) items in a list or library. It's called the
HarePoint Workflow Scheduler and I love it.
You can create a view that shows the items that you want to run the workflow on.
Or, if you know how to write CAML, you can feed the CAML Query right into the HarePoint Workflow Scheduler task.
At my company we have several sites in production that use the HarePoint Workflow Scheduler with a view.
So, first, create a SharePoint Designer workflow and define it to run manually.
Then use the HarePoint workflow scheduler to define a schedule.
You can define a schedule for the HarePoint tool, like every day, month, week, etc., by just clicking a few boxes.
Since this functionality does not come out of the box with SharePoint 2010, this free tool is a real gem.
cheers, teylyn

How to change font size in a call-out tool box?

Hi, the other day i inserted a call-out tool box in a PDF document, however i cannot find anything that can change the font size of the letters i input in that box. could anyone help? Thanks.
Sherman

This is a question for the Acrobat support forums – please post there.
From: Adobe Forums <[email protected]<mailto:[email protected]>>
Reply-To: "[email protected]<mailto:[email protected]>" <[email protected]<mailto:[email protected]>>
Date: Wed, 23 Nov 2011 10:55:07 -0800
To: Leonard Rosenthol <[email protected]<mailto:[email protected]>>
Subject: how to change font size in a call-out tool box?
Re: how to change font size in a call-out tool box?
created by danmarch<http://forums.adobe.com/people/danmarch> in PDF Language and Specifications - View the full discussion<http://forums.adobe.com/message/4043425#4043425

Just took my iPod classic 160GB out of box turned it on and accidently hit clickwheel or button and eveything is in language other than english. How do I get it back to english without being able to read symbols.

just took my iPod classic 160GB out of box, turned it on and accidentially hit a button changing the language from english to something else (chinese or japanese). All I see now is symbols. How do I turn it back to english without knowing what any of these symbols mean. I started clicking buttons and click wheel and can't seem to get to any section with various language options. Please some help me get it back to english.

There are two options. The first is to learn whatever language you have it set to, the second is to find someone else with an iPod Classic and read the English menu and follow it in your iPod. I also believe you may be able to set language perfunces from within iTunes while the iPod is docked, providing they are in English.

How to hide views in a SharePoint2010 list by using out of box solutions only

Hi,
I work on a Time Reporting tool which is used by the users to submit their time sheet twice a month.
The submission of time sheet is done through a MS INFOPATH 2010 form. The data then gets submited to a List named "Time Sheet List".
This list has several important views already existing. These views had been created by the designer (not me) .
Currently if an user submits his/her time report once,then they cannot edit/delete it. Only the admins [Me one of them] can do any kind of modifications.
I am working on giving the users access to edit/delete their own time report for the current month only.
I have created a view "Edit Time Sheet" which will show the user only their own time report for the current month only.
Now the issue is how do i provide permission to the list "Time Sheet List" so that only the "Edit Time Sheet"
view is visible to the users and the other views are hidden from all users except the admins .
If i provide edit permission to the whole list then all of the views will become editable which is not wanted.So, i just want the users to see "Edit Time Sheet" view so that they can only modify their own time sheet for
the curent month.
Please let me know how i can achieve this through out of box solution as i donot have any dev environment installed in my system. I have only MS INFOPATH2010 and SharePoint Designer 2010 in my system.
Regards,
Anena Das

Hi Anena
There is no OOTB approach to achieve the same , one simple work around would be
Edit the view (Site Actions->Edit page) you will see your List view webpart there . Edit the Webpart Properties and Set the "Target Audience". Mention the SharePoint groups in there or users who should view the list view.
So when a user who is not a part of the target audience navigates to this page , they will not see the list View. You can show some custom message to them "You are not authorized to view this".
As I mentioned it will be just a work around if u dont want to use Javascript/jQuery and custom components/
Thanks and Regards,
Nandini

Price Difference: Out of box w/ Missing Accessories vs Out of box w/o Missing Accessories?

Hello
Ok, so I need some help.
Last night, I purchased a Samsung 55" TV out of box. When I went home to install my brand new (used) TV. It was missing the power cord! After further examination, it was also missing the IR Extender Cable and the batteries.
On the label, it said it was "no missing accessories" but unfortunately, it was missing some key accessories to run the tv. I talked to the store and they were unable to provide me with the missing accessories and that I had to buy them individually and despite being labeled as "no missing accessories," that's the true cost of the TV.
My question, is that price correct, would there be a price difference if a out of box tv had all the accessories vs not having all the accessories?
I just want to make sure I paid the true value of the TV. As I see it, the TV may have been priced based on all the accessories but since the TV is missing accessories, the price of the TV may be different.
Your thoughts?

Hello ItsJTP,
Open box items are a great way to save on some of your favorite devices! It is sad to hear that this experience may not have met your expectations or been what we hope for our customers purchasing such items. I am sorry for any concern this may have caused you.
Open box items should be marked appropriately for any missing pieces or accessories, and then priced accordingly. With that said, unfortunately I am unable to know whether this was priced correctly, and missing accessories listed incorrectly, or if the missing accessories were listed incorrectly and thus the price was not appropriate.
With the information registered with the forum, I was unable to locate your purchase to review it. I am sending you a private message to gather further information in regards to this inquiry. You may check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Task termination due to sending of out of box email templates

Hi,
We are using custom templates to notify end user during creation, group approval and deletion process. Handling of proper template has taken care in workflow.
Instead of deleting the Out of box templates, the smtp address has changed to "1.0.0.0", to make sure end user won't receive these templates even its triggered by mistake.
In group approval scenario during update of a user, approver is getting an email notification through custom template and workitem is adding into approver's bin but randomly observing that the task is getting terminated with error message "javax.mail.SendFailedException: Sending failed; nested exception is: javax.mail.MessagingException: Could not connect to SMTP host: 1.0.0.0, port: 25; nested exception is: java.net.ConnectException: Connection timed out: connect".
This could be due to IDM sending default templates (as SMTP host: 1.0.0.0 is present only in default templates).
Due to this no action is getting executed upon the group approval request approved by the approver as main update task itself has terminated ( it makes sense).
Workflow trace shows task has executed fine with no errors.
Can any one help us why out of box templates is kicked off though custom templates names were set in workflow??
Is there a mapping of templates with scenario similar to form and process mapping??
Is deletion of out of box templates affect the system as we no where using??
Regards,
Laxmi

vilynne46 wrote:
Denial Letter: I don't understand something i have 3 Synchrony bank accounts, Which 2 of them have a zero balance of $102.00 dollars which I will pay off on Monday and I was denied for a BP gas credit card .I totally disagree with the reasons you gave for the denial as my credit report says nothing of the sort. If you really check my credit report you will see that I pay my bills on time I have never been late for the past seven years, I had a Bankruptcy in 2008 because I co signed for my step daughter for a house and she reniged on the payments and they came after me , so my Attorney suggested I claim bankruptcy, But if you check I always paid my bills on time every month Even before the Bankruptcy. I earn a good living , and I do not have any financial problems. My wife and I both use BP Gas as it is right down the street from our house, so rechecking my credit report will show you I always pay my bills on time Sincerly Victor GrecoDenial reference # is Loo22tWelcome to MyFico. Just so you know this is not Synchrony Bank but the forums for Fico, the issuer of credit scores. If you wish to communicate with Synchrony, you need to contact them directly though they are not known to overturn their credit decisions. Good luck

HP Pavilion DV6-320 out-of box recovery error: PLEASE HELP!!!!

Hi
I have restored(F11) my laptop to out-of-box factory restore, after fresh installation laptop got rebooted . After entering the system name, location, date.. etc. Before the desktop is loading for the first time i got the error,
' To run this application, you first must install one of the following version of the .NET Framework: v2.0.50727
Conatct your application publisher for instructions about obtaining the appropriate version of .NET Framework'
After clicking OK on the error window desktop loaded with classic theme and explorer.exe was not working.. i am unable to open My computer, there is no IE, on the bottom of the desktop it was written as the copy of windows is not genuine.
Operationg system is windows 7 Home premium
I have restored my laptop to out-of-box 6 months before i did not face any issues.
Please Please some body suggest me !!!

Have you tried to restore it again since then? It sounds like something went wrong during the installation and not all of the required files were installed correctly. If that doesn't work, you may want to contact HP and have them send you the recovery discs.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

I have lost my disks for my imac computer and now its on a grey screen cause i have no time machine backup. How can i restore my imac to the original out of box state please

Is there anyone that can give me the steps to erase everything and have out of box state again. i lost my disks. i ordered a os from apple
not the lion that my machine had but another one. is there anyway i can just erase everything and start over. please help

You need to contact Apple Customer Service about purchasing replacement discs for the computer. You have posted in the PPC forum, so I assume you do not have an Intel Mac, but since you haven't stated what you have we simply don't know enough to assist you.
Customer Service: Contacting Apple for support and service - this includes international calling numbers.

Need help in modifying mapping parameters of out the box mapping

Hi There,
I am a new bee to dac.
Need help in modifying mapping parameters of out the box mapping, which is invoked by DAC task.
We got a requirement to edit mapping parameter. When I go and see parameter under mappings tab in a mapping, I could not see any values in it.
But when I set any value, and validate it. It is successful.
Is it right way to do it?
What my concern is, When I initially go and see parameter values under maapings tab in a mapping, they are blank.
Where is it storing these values?
Thanks,
Rag

If you modify mapping then u have to create new task in dac and dac itself craete parameter file at run time. if you want to add more parameters then do it in dac system parameters tab.
Thanks
Jay.

How do you change the font color in CALL-OUT text boxes in PRO XI?

How do you change the font color in CALL-OUT text boxes in PRO XI?

It's not so simple to find it if you don't know what you're looking for... But it can be found via View - Show/Hide - Toolbar Items - Properties Bar.

Need solution for sub site when we click on the list item of a list? by using out of out of box feature in share point 2010

Hi all ,I have Task that When click on list item a new sit will open fo
for ex: I created a List (test list) and list items are Project name,Application, Start date ....,when i click on Project name a new sub site will open,
Is there any out of box feature ?
for that Please help any body knows
Thanking You,

This is a forum related to System Center Service Manager. Your question seems to be related to Sharepoint 2010. Maybe it's better to ask in the Sharepoint 2010 forum, for instance: General
Discussions and Questions
Andreas Baumgarten | H&D International Group

Share photos by email not working. Brings up grayed out check box? Want to share photos thru Entourage.

Share photos by email not working in Photos Version 1.0 (209.52.0) on a Macbook Pro 17" Yosemite 10.10.3. Brings up grayed out check box? Want to share photos thru MS Entourage for Mac 2008 Ver. 12.3.6 Thanks!

@Naiks, having suffered through unsuccessful synching attempts for Calendar and Contacts myself, l would suggest you try the following:
UNINSTALL iCloud control panel from your PC. Seems silly, but do it.
Go into Outlook, and look at the very top menu. Click FILE, then ACCOUNT SETTINGS, then click the popup box.
You will see a list of all your email accounts. Make sure that ONE of them has a checkmark against it. If not, select the account your want as your default, and click "set as default.
Exit out of Outlook and reboot your machine.
Now reinstall iCloud, check CALENDAR and CONTACTS, and do as instructed when prompted.
Reboot for good luck and now launch OUTLOOK. All that remains is to locate your iCloud Contacts and Calendar files, and make them your default.
IMPORTANT: Don't panic if you can't find your contacts -- they're there. Click CONTACTS and you'll see you have several available contact files. Locate the one label "iCloud" in grey type. Right-click on it, select PROPERTIES, then click the Outlook Address Book tab. Check the box that says something like "Make this my default Outlook Address Book." Keep clicking "apply" and "okay" until you've exited out of the dialog box maze.
You may have to do something similar with your Calendar files. I dd not, but if you need to, do it.
Everything should now sync pretty seamlessly.
I didn't have the exact same problem as you, but my dilemma was close enough. Good luck!
Arthur P. Johnson

CF8 Doesn't Run on Mac OS X Leopard Out-of-Box

There's been many threads floating around the web complaining
about people not being able to use the CF8 server anymore after
upgrading to Mac OS X Leopard. It doesn't give an error nor serve
up pages, it just sorta hangs there. Some people have been able to
do a multi-server install, and then jack with jrun to get it going
... but it doesn't work "out-of-box" like it used to in Tiger where
it just worked!
Be forewarned.

NickC wrote:
> There's been many threads floating around the web
complaining about people not
> being able to use the CF8 server anymore after upgrading
to Mac OS X Leopard.
> It doesn't give an error nor serve up pages, it just
sorta hangs there. Some
> people have been able to do a multi-server install, and
then jack with jrun to
> get it going ... but it doesn't work "out-of-box" like
it used to in Tiger
> where it just worked!
>
> Be forewarned.
>
Leopard is not a supported platform for cf8.
but knowledgeable ppl have found ways to run it:
http://www.markdrew.co.uk/blog/index.cfm/2007/10/27/Running-ColdFusion-8-on-Leopard
Azadi Saryev
Sabai-dee.com
http://www.sabai-dee.com

Wireless out of box

Similar Messages

Maybe you are looking for