Wireless password won't work

trying to connect to wireless at work, but the password won't work.... i try'd the same password on ipod... works fine... also i can use wireless at home... no prob....
any ideas?

Powerbook G4, you may have a wireless card that is too old and doesn't support newer encryptions schemes like WPA or WPA2. What are you using as your wireless encryption algorithm at home?
Per my profile, you can see that I have a computer designed and manufactured eight years ago. It uses an old 802.11 "Airport" card; not "Airport Extreme" as does my Mac Pro. It doesn't do WPA or WPA2. If the wireless access point (WAP) at work is using those, you'll be prompted for a WEP password because your computer doesn't know any better. But it won't work.
So first thing you need to do is find out what does the WAP use. Next thing you need to do is go into your System profiler and see what kind of Airport card your Powerbook has.
If it's not an "Extreme" or "Express" or whatever, just a plain ol' "Airport" card, then you are SOL trying to use that to connect to your work's WAP if they are using WPA or WPA2. There are some USB wireless thingies that you can plug in to an available USB port and you can use that to access the work (and home) networks. I know that BDAqua has previously posted a URL or three that point to some inexpensive USB 802.11 transceivers that you could use on your Powerbook.
As a side note, if this is indeed the case for your situation, this would also imply that you are probably using an inferior (as in hacked/cracked) wireless encryption protocol at home. Once you get a WPA2-capable USB thingy, get in to your router's wireless setup and change it to WPA2-PSK-AES.

Similar Messages

My iCloud password won't work in my MacBook Air but works in my IPhone5s.

My ICloud password won't work in my MacBook Air but works in my Iphone5s

Sorry, but your issue has nothing to do with Apple networking. You may get better results getting a solution if you repost to the iCloud area of the Apple Support Communities.

Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?

Installed Windows 7 on bootcamp but now my wireless mouse won't work when in windows. What can I do?

assuming it is an optical mouse (no ball etc.) then there aren't any moving parts involve in the motion detection
so there's a faulty component or connection
from what you describe it could be just a loose/broken connection, so if you know someone familiar with electronics see if they can open it up and have a look

Macbook pro did an update and restart and now my password won't work

Hi there,
My Macbook pro did an update and restart and now my password won't work. help!

When I type in my password it looks like it is going to log in....the screen changes to blue...and then the login screen loads again.

WEP Password Won't Work!

I have a Wireless router, which can do WEP, WPA and WPA2 encryption. If I have WPA2, then my desktop (Windows) can't remember the password, so that encryption is out for the mo, WPA won't work on our old laptop, and so WEP is all that's left. Every device in my house (including my iPhone) can connect, but my MacBook fails too! I have tried loads of different WEP passwords, and it can still connect to other WEP protected networks, but not mine! Is there anything I could have done, or is this a general problem?

Just like Windows stores your network profile info in C:\Document and Settings, the mac stores your network location in a plist file.
WEP is really for B/G networks, most newer networks are using WPA/WPA2 because it is more secure.
Can you connect to WPA2 Personal with the mac and that router?
Can you create a new Windows profile under network settings? (you should be able to).
Sometimes if you cannot connect using ASCII character for the password, look at your Key 1: on Windows for the Hex version of the password and try typing the Hex in the password box.
IF your password for WEP is short, like less than 8 characters, that may be the problem, it order to get WPA2 you need a password at least 8 characters long, 10 is better and more accepted by encryption schemas. Try adding 1234 to the end of your existing password (i.e. password1234) in the router, then input it again to see if it works. Try making the password exactly 10 characters long if you can.
WEP is like having no security at all, WPA/WPA2 is much more secure.

New password won't work! Help please!

So with the new software update, recently, I had to change my username to an e-mail address because my account wasn't "Safe." That's fine; I did that, but with the new username came a new password. Now, that password will not work! I even wrote it on a note verbatum. I've tried every password I normally use, including the original iTunes password. I've tried variations of it with different capitalizations. I've tried resetting the warnings and caches in the iTunes store, as seen on another thread. I've tried restarting my computer and my phone. I've tried everything.
I even tried resetting it, but Apple says it sends the email and it doesn't show up in my inbox, leaving me unable to change it! I've tried checking all my inboxes, but I can't find the email... I also went down the security questions route, but I made the account when I was much younger and can't remember the answers for the life of me. Normally, I would just make a new account, but I have $20 on this one, and I'm not giving that up.
Does anyone have any way to get the reset email to show up? Or does anyone know why it won't? Help is much appreciated! Thank you!

I have the same issue.
Everything else including this site recognises my new apple password. BUT FaceTime still does not ....
This is IMMENSELY annoying as it means I cannot speak with relatives in England at the moment. Facetime is so buggy with this kind of thing I may switch them all to Skype when I return home from the states.
EVERYTHING else works fine - JUST facetime that is screwed up (a common occurrence sadly ... unclear how something so simple can make using it so difficult and awful).
Please explain how to resolve and not just change the password .... I have tried this and again EVERYTHING but facetime works so it must be facetime. Shame it can't be removed and reinstalled ...
IPAD2 recently upgraded to IOS8.1

ITunes password won't work

Aplle TV keeps telling me to put in my password but when I do it won't work. But I checked it on iTunes and it worked there, as well as online. Then I went online and changed it but Apple TV still won't accept it. What gives?
Edit: Nevermind it's working again. I had to reset Apple TV.
Message was edited by: TomCat4680

Try some of these things
http://www.apple.com/support/itunes/troubleshooting/

Old name and password won't work when networking to new Win7PC.

I have a name/password problem when trying to network a new Win 7 PC via a new Netgear 2200 Router to a MacMini.
It networked 100% OK with the old XP System and old Netgear Router, but now when I click on the PC icon that shows up in Workgroup the old password doesn't work and there is a different popup menu that won't allow the old name and password.
Interestingly the Mac Mini still networks with the XP laptop using the old pupup box with name and password.
Netgear say it's not their problem - even though they list 'mac compatible' on their box.
The PC manufacturer (Acer) say Mac issues are outside of their free technical support.
Apple support said the Macmini was 'out of warranty'.
So I'm stuck using a USB stick or email to transfer files from one to the other!
Please help, I need that network connectivity back asap.

Option 1
If you've enabled root logins, log in as root and promote the other user to an admin.
Option 2
Recover your entire system from the last Time Machine snapshot taken before the damage was done, if you know when that was. Afterwards you can restore any data that has changed since then from a later snapshot. If you’re an advanced user familiar with the shell, there may be a quicker fix, but I prefer not to get into that.
Option 3
Back up all data, then boot in single-user mode (command-S at startup.) When the text stops scrolling, follow the prompts to make the boot volume writable. Then enter the following command very carefully:
rm -i /var/db/.AppleSetupDone
You should get the following line of output below what you entered:
remove /var/db/.AppleSetupDone?
If you do, then enter
y
and press return. Then type
reboot
Press return again. The system will boot into the Setup Assistant, as if you were setting it up for the first time. Skip the prompt to transfer information. Create a user with the same name as the old admin user. Log in and test. You may need to recreate your other user accounts, if any. Their files won't be deleted.
Option 4
If you're not comfortable with any of the above options, get someone more experienced to help you. One way to do that is to make a "Genius" appointment at an Apple Store. It's a free service.

How to sync icloud with itunes have two different id's on ipod and password won't work for one of them not even the old one

Hi all,
I recently updated my itunes/istore id. Now my ipod touch won't recongized the id for the cloud. It works fine for the rest of the ipod but my old id (email) is still on for the cloud how do I change so all is the same. BTW the passwords old and new won't work with the old id... Should I put it back in?
Any help would be great!

Let me clarify if needed... the id I'm talking about is the email address...
Thanks again

My wireless keyboard won't work for one of the users

All of a sudden the wireless keyboard stopped working for me, but it works when my wife logs in. I had to create a new account for myself and the keyboard now works. However, the keyboard won't work for my original account. Any thoughts?

Does it shows up as a device in your BT menu under the problematic user? Does it connect? If you delete it from your admin account and re-pair it, does it work?
There is a command called ioreg, which can help as well.
Here is sample output from ioreg -lw0 | grep -i keyboard
      |   | +-o AppleBluetoothHIDKeyboard <class AppleBluetoothHIDKeyboard, id 0x10000372d, registered, matched, active, busy 0 (4 ms), retain 10>
      |   |   |   "Product" = "BT-Keyboard-AL-i71"
      |   |   |   "PoweredOffNotificationType" = "KeyboardOff"
      |   |   |   "CFBundleIdentifier" = "com.apple.driver.AppleBluetoothHIDKeyboard"
      |   |   |   "IOClass" = "AppleBluetoothHIDKeyboard"
      |   |   | |   "Product" = "BT-Keyboard-AL-i71"
      |   |   | +-o AppleEmbeddedKeyboard <class AppleEmbeddedKeyboard, id 0x100003734, registered, matched, active, busy 0 (0 ms), retain 10>
      |   |   |   |   "IOClass" = "AppleEmbeddedKeyboard"
      |   |   |   |   "HIDDefaultBehavior" = "Keyboard"
      |   |   |   |   "Product" = "BT-Keyboard-AL-i71"
      |   |   |   |   "FnKeyboardUsageMap" = "0x00070050,0x0007004a,0x00070052,0x0007004b,0x0007002a,0x0007004c,0x0007004f,0 x0007004d,0x00070051,0x0007004e,0x00070028,0x00070058"
      |   |   |   |   "NumLockKeyboardUsageMap" = "0x00070029,0x00070029,0x0007002a,0x0007002a,0x0007002b,0x0007002b,0x0007003a,0 x0007003a,0x0007003b,0x0007003b,0x0007003c,0x0007003c,0x0007003d,0x0007003d,0x00 07003e,0x0007003e,0x0007003f,0x0007003f,0x00070040,0x00070040,0x00070041,0x00070 041,0x00070042,0x00070042,0x00070043,0x00070043,0x00070044,0x00070044,0x00070045 ,0x00070045,0x0007004a,0x0007004a,0x0007004b,0x0007004b,0x0007004c,0x0007004c,0x 0007004d,0x0007004d,0x0007004e,0x0007004e,0x0007004f,0x0007004f,0x00070050,0x000 70050,0x00070051,0x00070051,0x00070052,0x00070052,0x0007000d,0x00070059,0x000700 0e,0x0007005a,0x0007000f,0x0007005b,0x00070018,0x0007005c,0x0007000c,0x0007005d, 0x00070012,0x0007005e,0x00070024,0x0007005f,0x00070025,0x00070060,0x00070026,0x0 0070061,0x00070010,0x00070062,0x00070037,0x00070063,0x00070082,0x00070082,0x0007 00e0,0x000700e0,0x000700e1,0x000700e1,0x000700e2,0x000700e2,0x000700e3,0x000700e 3,0x000700e4,0x000700e4,0x000700e5,0x000700e5,0x000700e6,0x000700e6,0x000700e7,0 x000700e7"
      |   |   |   |   "CFBundleIdentifier" = "com.apple.driver.AppleHIDKeyboard"
      |   |   |   |   "HIDEventServiceProperties" = {"HIDKeyboardModifierMappingPairs"=()}
      |   |   |   +-o IOHIDKeyboard <class IOHIDKeyboard, id 0x100003737, registered, matched, active, busy 0 (0 ms), retain 9>
      |   |   |   | |   "HIDKeyboardRightModifierSupport" = Yes
      |   |   |   | |   "HIDKeyboardKeysDefined" = Yes
      |   |   |   | |   "Product" = "BT-Keyboard-AL-i71"
      |   |   |   | |   "HIDKeyboardCapsLockDoesLock" = No
      |   |   |   | |   "HIDKeyboardSupportedModifiers" = 33431807
      |   |   |   | |   "HIDResetKeyboard" = Yes
      |   |   |   | |   "HIDParameters" = {"HIDKeyboardModifierMappingPairs"=()}
      |   |   |   | |   "HIDKeyboardModifierMappingPairs" = ()

HP Pavilion g4-1117dx Wireless Button Won't Work

My HP Pavilion g4-1117dx wireless button(F12) won't work. I've tried rebooting, reformatting, changing operating systems(win7 to win8), nothing works. At very rare instances I turn-on the laptop it is already on but only for a short while before it turns off again. The wireless adapter shows-up at the device manager and I've tried updating it but I cannot confirm if the update was successful because the wireless light turns orange by itself. I have also tried to enable and disable the action keys in the BIOS menu. Please help.

Hey Tung,
If your connect an external keyboard are you able to type? I would first give it a good cleaning to make sure there is nothing interfering with it. A can of compressed air usually works wonders or a air compressor if you have one handy.
If this does not work try a hard reset:
Disconnect all external devices first
Remove AC power
Remove the battery
Press and hold power button for at least 20 seconds
Reinstall your battery
Plug in the Power
Turn on the computer
Let me know if this helps!
Sean
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Installed adobe but password won't work to read on tablet

Installed reader and adobe on new tablet, but adobe password will not work to let me read. I reset
Password but that doesn't help

A password protected PDF? How did you reset it?
What's the operating system on that tablet?

Administrator Bios Password won't work on HP 4420s XT940UT#ABA Windows 7 64 Bit

Someone please help me with this!!
I bought this laptop from a friend (have a receipt) who sold it to me because the screen was cracked and all spidered out when you turned it on. Well everywhere he went to ask about getting the screen fixed it was very expensive ($250 - $350) and he said he would just get a newer laptop. So he sold me this one which is a HP4420s XT940UT#ABA Probook Model. About a week after I bought this Probook the friend who sold it to me died suddenly. This was sudden and terrible. Some time later I got around to buying the LCD screen for this model, replaced it myself (was very easy actually) and booted up the laptop with a fresh install of Windows 7 Pro edition 64 Bit. After installing all my software and using the laptop for quite some time now, I wanted to get into the Bios which I had never done. So when I started up the laptop, hit escape, then F10 to enter BIOS, there were two places to enter a password which is different then any Dell I've ever owned. One was mine I guees that I set up using HP protect tools and the other says BIOS/Administrator. Well I can make most changes using the one I set up with my password however my password doesn't work nor can I get into some of the very important changes I wanted to make using the Bios/Administrator, like turning on the LoJack, figuring out the hard disk lock etc, turning on turbo boost, fan controls, etc. Well Since the person I bought it from is no longer with us, there is no one to turn to for the answer to this Administrator/BIOS password question / problem. I tried taking out the Rtype battery and resetting it that way, didn't work. I called HP multiple times and they sent me to a BIOS page to download the same BIOS I have already, wouldn't let me install it. When I bring up the command prompt and put in BiosConfigureUtility.exe nothing happens, just tells me wrong command. When I try to get into the BIOS going through the C: file into the SSM files, I reach the BiosConfigUtility.exe file, click on it to open and it just flashes a small command page way to fast to read what it says. I would like to have complete control over my laptop figuring I have so much time and money invested into it now. Could the problem have something to do with installing the 64 bit version of Windows 7 instead of the 32 bit I guess it originally came with? I have all the manuals and they say that this laptop is Windows 7 Pro Ultimate 64 bit compatible so that's what I installed. I get mixed answers from a lot of different people on this and would like a answer from an HP person who has experience dealing with the BIOS in the Business models of Probooks if possible please. I really like this Probook and have since became a major fan of HP over Dell and Lenovo products. I plan to buy two more probooks, one for my wife and one for my daughter because this one is like a MacBook, only better. Thank you for reading this and hopefully someone can help.
Model: HP Probook 4420s
Type: XT940UT#ABA
Operating System: Windows 7 Ultimate
BIOS Version: 68AHHH Ver.F.20
SM BIOS Version: 2.6
Hardware Extraction Layer: Version 6.1.7601.17514
This question was solved.
View Solution.

once you log a support case with HP customer care, they will provide you once utility and steps to run it. which can capture the UUID. BTW- UUID is a unique ID for each machine (16 or more digits) stored in BIOS itself.
Once the utility results(UUID and other info) in the log file, shared with HP. they can generate a key file(SMC) to reset.
well, Technical support depertment can help you in it, no need to ask for any specific person or department.
hope it helps.
Regards,
WW
“I am an HP Employee“
***** Click the KUDOS star on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem***

Sticky password won't work on Firefox 4, but did before

I just updated to Firefox 4 and now Sticky Password doesn't work.

You have to update to their latest build..
http://www.stickypassword.com/download

I have Version 11 in the Adobe Reader now. Now I can't open-password won't work

I have downloaded my new verison 11--now I can't open. Password won't work

Thank you for the message. That also tells us that you're on a Mac. The error is a strange one, -1712 means "timeout" and it's hard to think what will cause that. Some more questions. Please answer them all, or let us know if any of the questions don't make sense.
1. Can you open the Adobe Reader app in the normal way? That is, from Applications?
2. Can you open other PDF files, from web pages rather than mail? Here is one to try out http://www.adobe.com/enterprise/pdfs/ebxml_faq.pdf - it isn't to read it's just a test. What happens?
3. What is your mail app? That is, at the time of this -1712 error, what app name is shown at the left of the menu bar?

Wireless password won't work

Similar Messages

Maybe you are looking for