Wireless PC Card not Working - Lombard

My new Dell 1300 PC Wireless card worked immediately when I put it in. Then I set up my email account. I powered off the card. And it hasn't worked since. The port configuration is on for Airport, but the card is not picking up the network. The green lights on the card are no longer on, but I have the option to power off the card by clicking on the card's icon. Strange, I'm stumped. I've spent a couple hours trying to reset things. Any ideas? It seems the card is not getting power. i.e. the port is deactivated

Hi W,
It kind of sounds like the card isn't getting enough power. Does is have a jack to plug into a USB port or an AC adapter? If so try that.
Have you run an OS update recently (just prior to the issue) or made any other OS or software changes? Some third party cards will not work with an AP card also installed, so I'm wondering, even though it worked before, if maybe an update/addition changed something.
Basic maintenance: have you run Repair Disk? Boot from install disc (insert disc>restart>immediately hold down c key and keep holding it until you see “Preparing Installation”)>at first screen go to Installer Menu>open Disk Utility>select your HD in the panel on the left side>click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility such as DiskWarrior or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD (repair utilities can only repair the directory structure, not the HD itself).
Repair Permissions?
Tried another user account?

Similar Messages

  • Wireless pci card - not working under OS 9

    Hello everyone,
    I very rarely post on OS 9 sub board, but I have one quick question. First off, my mac is a powerful(to me it is!) 2003 MDD dual 1.25(last before G5) and has 2GB memory with 2GB L3 cache per processor.
    Now thats out of the way. I would like to know if the Belkin F5D7000 card(wireless-G 802.11g) supports working under OS 9.2.2? If Belkin does not have a driver for it, is there a generic driver I can install which would allow my wireless card to work under OS 9.2.2? Yes, I have the FW400 based system, however I might consider going with the FW800, but I would like to know really what the big differences are between the FW400 and FW800 machines?
    I know the FW800 has ONE FW800 port, has a slot to support AIRPORT EXTREME card(though my machine has a PCI Belkin F5D7000 wireless-G airport extreme card). It also has support for bluetooth which I wouldn't really use anyway since I have no device to make use of bluetooth.
    So, my question really is, is there a way to get the wireless card to be recognized under OS 9.2.2 even though Belkin does not have a driver for it? I really would like to use OS 9.2.2 sometimes, but its useless to me if I can't get on the i-net, and regular ethernet is NOT AN OPTION since where I live is only wireless internet.
    Ideas? Suggestions?

    Hi,
    A ethernet to wifi bridge is connected to your computer via the ethernet port.
    ex: http://www.macsense.com/product/networking/wua800-1.html
    So there is no need for driver in the OS since it's using the ethernet port like connected via a wire. It's the box that convert it to a wifi signal. You could even use this for OS X, Windows or Linux etc...
    Many manufacturers make this kind of device.
    A+

  • SB04100 Sound Blaster Card not working after computer rebuild

    =SB0400 Sound Blaster Card not working after computer rebuildZ I did a full disk format and reinstall for a friend on a Dimension 3000, running XP SP3. There is no sound at all. Speakers are good, tested on another system. Model number on the back of the sound card is SB0400, so I assume this is an older 24 bit PCI SoundBlaster card. Although I reinstalled all drivers from Dell, I found no drivers for this. The Creative site has no listing for this model.
    Computer does not seem to recognize the card. Have not opened the box yet but I assume if I were to remove and then reinstall the card it would be recognized (?) I then have to find an SB0400 driver.
    Does anyone know where I can find an SB0400 driver ? Does the strategy of pulling and reinstalling the card make sense ? (I have really avoided tampering with any of the hardware on this box -- since it is not mine.)

    Re: SB0400 Sound Blaster Card not working after computer rebuild? Thanks much for your response. Problem solved for now. I removed the board and then reinserted it, after which I was able to download the drivers directly. Some of my difficulty with this whole process has been ) I didn't know there was no working speaker in the computer and 2) I apparently misunderstood the BIOS settings for this. I re-set it up as an add-on board during the troubleshooting process. After loading the driver, I went back to the original setting (don't recall what it was but it was for integrated sound). The setting for integrated sound works fine, with external speakers and the new 24 bit driver. Still some noise (popping and static) but this board shares the bus with 2 other cards one of which is a wireless network card. May be a PCI latency issue but I'm reluctant to change that because the network card is a bit shaky anyway.
    Everything works for now -- I'll be glad to get this particular computer out of my house !

  • Getting Wireless PCMCIA card to work

    Attempting to get a Linksys wpc54G wireless PCMCIA card to work on my 1.5Ghz G4 PB.
    I verified that the card works, by plugging it into to a PC.. ( works fine)
    Plugging the card into my pcmcia slot, on nothing. No lights.. nothing.
    I get the PCMCIA icon on the menu bar, three options
    unknown vendor <-grayed out
    Network controller <-grayed out
    Power card off.
    I read where there might be some hack that I have to do to get PCMCIA support running, but no clues after that.
    Any help is greatly appreciated...
    Larry

    Hi,
    When I got my PCMCIA wireless card (not Linksys) it came with an install CD. The G4 maybe wouldn't of known what it was or what to do with it on it's own, needed the install feature.
    Works fine once installed. Did you get an install CD for it from Linksys? For the Mac OSX? If not, it might pay to check their web-site for one.

  • Imac wireless mouse is not working ?

    maci wireless mouse is not working.  Is blue tooth hardware not working or is problem related to airport extreme card?

    A common problems that occurs when wireless Bluetooth device suddenly stop working or pairing correctly with your Mac is a a corrupt Bluetooth preference list.
    You can fix the problem following these instructions:
    How to Fix OS X Bluetooth Wireless Problems
    Tom

  • Runtime error R6025 message after log on to Vista - Flash Card not working

    Hi
    I'm a newbie & would appreciate any advice.
    I am getting a runtime error message R6025 when I log on to Windows Vista.
    When I click out of the box I then get a message saying Toshiba Flash Card not working.
    I cancel that and my laptop is ok except I don't know if the flashcard is working or not because I don't know what it does.
    Sorry if I sound thick
    Thanks
    Neelie

    Hi
    I found this MS knowledge base article:
    +Description of the R6025 run-time error in Visual C++\+
    http://support.microsoft.com/kb/125749
    But I doubt this description would be useful for you or anyone here. It describes this error in Visual C++ and this is programming language.
    However, I think you should simply reinstall the Value Added Package which you could download firstly from the Toshiba European page.
    At first you have to remove the old Value Added Package from the system, then reboot the notebook and follow with new VAP installation.
    Bye

  • How do I correct the "Wireless Radio is not working" problem on my Photosmart C410 Printer?

    HP Photosmart Prem C410a All-in-One
    Windows 7 64-bit
    Wireless Radio is not working
    Trying to change from USB to wireless setup
    purchased at Staples on 8/19/2010 - means warrenty has expired

    With the printer ON, unplug power from the back of the printer for 30 seconds.  Does that reset the radio?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

  • HT3917 My apple wireless keyboard is not working after new batteries installed

    My apple wireless keyboard is not working after new batteries installed.

    Do you get a steady green light to say there is a connection.    If not, are the batteries the right way round.   Do you have a monitor to tell the batteries strength. Is there a reading.   Are the batteries good quality ones, Duracell, Energiser or Apple rechargeables.

  • Windows 8.1 freeze on any hardware scan or changes. USB wireless keyboard mouse not working

    Problem : System Freezes frequently on any hardware scan or changes.
    Symptom : Wireless Keyboard Mouse not working.
    Caused by : VMkbd.sys located in C:\Windows\System32\drivers.
    Issue : VMware player or VMware Workstation installed on Windows 8.1 causes compatibility issue leading to system freeze
    Soultion : Please follow steps below
    Step 1: Start > run > regedit
    Step 2: Locate to this registry HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e96b-e325-11ce-BFC1-08002BE10318}
    Step 3: On the left side plane, Right click on the registry {4d36e96b-e325-11ce-BFC1-08002BE10318} and then export it as backup. Just to be safe.
    Step 4: Edit the UpperFilters, The value current would be kdbclass vmkbd. Remove the vmkbd. So only value left would be kbdclass.
    Step 5: Restart your system and connect your USB wireless reciever. If all is well it will not freeze your windows now.
    This worked for me. Hope this works for you. Enjoy..!!

    Hi AshishSrivastava,
    Thank you for your sharing and update.
    Besides, I will change this thread type as discussion.
    Best regards
    Michael Shao
    TechNet Community Support

  • The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    My first post to the Apple Support Community so it looks like all I wanted to know is covered in the title. The research I have done led me to solutions that I am not comfortable trying for fear of irreparably damaging my keyboard and/or Mac mini. Does anyone have a simpler solution? Please? Hellooooo?
    Just in case the title is too long to show, I have re-pasted here:
    The volume keys on my Logitech K760 wireless keyboard do not work with my 2.3 GHz, Intel Core i5 Mac mini which runs Mac OS X 10.7.4. Anyone know how to correct this without having to re-code firmware?

    BDAqua wrote:
    Hello & welcome to the Forums!
    I think Spark cured this for another person and the same problem...
    http://www.shadowlab.org/Software/spark.php
    http://scripts.sil.org/cms/scripts/page.php?site_id=nrsi&id=ukelele
    http://doublecommand.sourceforge.net/
    Thank you for the response. Unfortunately, I could not figure out how to work the above applications. I thought that i had managed to assign the appropriate function keys in Spark to their volume counterparts, but it had no effect. Below is a screen shot. Do you see anything amiss?

  • Wrt610n wireless network does not work after firmeware upgrade

    Hi
    I just updated my Wrt610n hardware version 1 to the newest firmware, it did finish with sucess, I did factory reset reboot and reconfig. But the wireless network does not work , cant connect computers to it. Did downgrade the firmware to the same it was and restore my settings but still wireless does not work. But router works fine with lan.  Any suggestions? maybe the firmware tosted the router?
    Regards
    Stefan

    Update -
    After last reset and reupgrade with the newest firmware for hardware version 1 I could config the router and connect 2 computers with wireless - but only for about 15 mín - then they lost connection and could not reconnect.
    I did then get the newest update for hardeware version 2 - just to try and upgraded with that and got success, and now I have reset the router again and config it and those 2 computers are connected and have been for 1 hour now. So seems to be working - is it okay to have the firmware for hardware version 2 on my version 1 router?
    Any thought what is going on - could it be that the other firmware had not loaded compleytle or?

  • Wireless net does not work after installing SP1 for Vista - Error code 10

    After installing Vista SP1 on my computer (T61 - Vista Business 32 bit) my intel 82566mm wireless net does not work.
    Windows says "Error code 10" and suggests that I update the driver. I have downloaded the newest driver via another computer, but it does not help. Still error code 10.
    Any one else has the same problem?

    I fixed the problem. Uninstall iTunes and then reinstall it clean. Looks like upgrading is problematic.

  • The letter "u" on my iMac's wireless keyboard is not working.

    The letter "u" on my iMac's wireless keyboard is not working. Does anyone know how to fix this? All the other key are working fine.

    I started a having problems with it a few days ago. It worked intermittently then.

  • Wireless key will not work

    I just moved my mac mini to my new apartment and my wireless keyboard will not work. My man mini model is A1103. The problem is that I need to type in a password to get on my mac to get to the bluetooth config screen. So I'm stuck at the login screen with a keyboard that just blinks. Its also my TV so im goin nuts. PLZ help.

    If you know someone with an USB keyboard, borrow it and use it to input the password. It doesn't need to have been made by Apple or designed to be used with a Mac.
    (50804)

Maybe you are looking for