Wireless Phone 7921G

hi all,
We are trying to authenticate cisco 7921G wireless phone through EAP-TLS..
getting error message in ACS server
EAP-TLS or PEAP authentication failed during SSL handshake
but EAP-TLS works fine with same ACS server when user machine is connected.
please let us know if any particular service need to be enabled in cisco 7921G(other than choosing in profile) to make it work
thanks in advance

one more thing observed is, in ACS server, the manufactured CA root certificate loaded in ACS server and checked in edit trust list.
but in certificate revocation list..that root is displayed as not in use.
CRL Issuers
Issuer Friendly Name Status
Cisco Manufacturing CA Not in use
while edit to make it used it asking for CRL Distribution URL..where can i get this URL?
thanks

Similar Messages

How to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB

how to upgrade firmware on 7921g wireless phone from 1.0.2 to 1.0.4 via USB?
The 7921g is connected via USB to a PC. I am using a browser to access the phone. Documentation says "Click the Phone Upgrade hyperlink under SYSTEM options. " but that option is not present or not visible.

You can use the Phone Upgrade area on the web page to upgrade firmware files on the phones by using the USB connection or by using the WLAN. To upgrade the phone software, enter the phone software TAR (firmware file name) or use the Browse button to locate the firmware file on the network.
To display the Phone Upgrade area, access the web page for the phone as described in the Accessing the Configuration Web Page for a Phone section available at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7921g/5_0_1/english/administration/guide/21adm50.pdf

L2 Roaming issue with Avaya wireless phone on WISM -V6.0.196.0

Hello Friends,
I am facing Layer2 roaming issue with Avaya Wirless phone 3620 which are configured WPA / Pre-shared key auth with a SSID1 and face a cut or delay in the voice.
But when i use Cisco Wireless phones and try to roam between one LWAP to other i dont face a cut or delay in the vocie which are
Configured with 802.1x +CCKM auth .
Then i configured new SSID 3 with 802.1x+CCKM settings for the new Avaya wireless module 3631 , but still face cut and delay while doing Layer 2 roaming.
While i was using these AP in WDS mode i never faced this Layer 2 roaming issue with Avaya wireless phones.
In current WISM all the LWAPs are supporting properly to the Cisco phone and Wirelss laptop clients.
I request you to please let me know how do i proceed further to solve the issue and please let me know if anybugs or incompatibilty for WISM with Avaya wireless phones.
Appreciate your response.
Regards,
KA.

Hello ,
Can any body please respond to my above Query.
Thanks,
KA.

Airport Extreme runs on same frequency as my wireless phones

My wireless phones run on the dame frequency as the AirPort Extreme Base Station. I would like to be able to connect to the internet wirelessly but this seems to be a problem with the AirPort. Are there any subsitutes that would be compatible with my Powerbook G4?

reasonabledoubt, Welcome to the discussion area!
You will need to replace your phones with ones that operate at a different frequency.

WRT54GS and wireless phone interference

Up until a few days ago, I had a 2.4 GHz wireless phone system in the house but was getting constant "clicks and taps" on the phone. Since the wired phones operated fine and had no intereference, I figured it was the router. Changing the channels didn't help. Then I read and also was told that I should convert to a DECT 6.0 (1.9GHz) wireless phone system because wireless router signals wouldn't interfere with it. Fortunately the phones are not that expensive and I did that this morning...problem is, the interference is still there. I've upgraded my firmware to the latest via suggestion from a helpful gentleman in Live Chat, and changed the channel to the highest in the range but am still getting the interference.....any ideas?

1) This is very odd. Do you have a DSL or ADSL system? Or do you use cable or satellite?
2) Also, does the problem stop if you unplug the router?
If you have a DSL or ADSL system, then you need "line filters" on all your telephones, fax machines, etc. All telephone lines need a filter, except the line that goes to the modem. Your ISP should have supplied you with these line filters.

Showing Full AP name in cisco Wireless phone 7921-site survey

Hi,
I am working on a project where cisco wireless phone 7921 is utilized. We use phones sitesurvey tool for coverage tests. Our AP names are 18 characters in length and are not dispayed in full in site survey screen. Please suggest on a way to increase the display character count in the site survey or to make it a running text. Thank you.
Regards,
Madhan kumar G

Hi Leo,
Thanks for the suggestion. I looked at the Fluke OptiView XG Network Analysis Tablet. Looks very interesting, but looking at the cost of the Tablet, I am pretty sure that my Employer will say NO.
Anyways, Can you recommend some vendor options (It will be really helpful, if you can share the Model information as well) for the list highlighted below.
1. AP Tripod (Reaches 3 meters max) - Need recommendation on AP Telescopic Tripod which should be portable to carry in the Peli Case.
2. Distance measuring tool - Need recommendation on this.
3. Laptop harness - I did some research and found Connect-A-Desk Laptop Harness, which I am planning to purchase
Also, I need your inputs in choosing Antennas for Site-Survey Kit (I am looking at must to have options for the Kit).
Thanks,
CJ

Log-In Using Wireless Phone Number

I "normally" log in to my accounts through My Verizon. This USED to give me access to BOTH my wireless and my residential (FiOS) accounts. Now, when I log in through My Verizon, I can access my wireless account, but when I try to access my residential (FiOS) account, it asks for my log-in again. When I input my wireless phone number, I get a message that the Account Name is not on record ... or something like that. I called Verizon to find out why. After getting transferred back and forth, I was routed to a menu system and eventually hung up on. I tried again and spoke to a representative at Verizon Residential and was told, "We've made a lot of changes. Just use your Account Name to log on." This is not really an answer. Has somehthing changed without notification from Verizon? This response sounds like someone who really didn't want to take the time to get to the bottom of the issue to me. Any help out there from anyone??

I know it some cases (myself included) the did disconnect wireless bill and FIOS bill.Used to be called One Bill, but that appears to have been discontinued.

Download to verizon wireless phone

download to verizon wireless phone? LG cosmo 2

gdgmacguy wrote:
How about using a complete sentence including a noun AND a verb?
To be fair, there was both a noun and a verb in the first sentence. Just no subject or object of the verb.

Conference phone with a wireless phone.

VOIP8551B from Philips looks nice but I need a good conference phone in the base unit together with a wireless phone as well. Is there such a set? I am not looking for a USB connected one. I need a one that do not need a computer (usb) to work.

Hi Matt,
There is known defect about DTMF at FXS of UC320W through FXO. We have a beta image which resolves it. If you would like to use it, please send me an email at [email protected] and let me know your CCO ID. I will post the image for you to download.
Best regards,
Wendy Yang

How can we block a wireless phone number?

We use fios tv/internet/phone package and recently almost every day we got 2 or 3 times phone calls from the same wireless phone number we do not know. When we pick up the phone to answer, the caller makes no sounds and we have to hang up. It is very annoying. Is there a way that we can block this person phone number so that he/she can not bother us anymore?

THere is a service you can subscribe to, not sure what the name is right now, but if you call the billing office and tell them you are getting harrasing calls, they can put a block on it.
Some of the services like FiOS digital voice, the Hub or I think the old IOBI let you block up to 5 or so numbers so it shouldn't be a big deal.

Wireless Phone 7925 authentication with Windows NPS

Hello,
I try to enable Authentication on our Wireless phone 7925 that are connected on WLC.
Can I use Windows NPS?
I try to use it without success, phones are not able to authenticate.
Someone can help me?
Thanks a lot!
Seb

Same thing for 2003, it is called IAS (Internet Authentication Service).
http://www.microsoft.com/technet/network/ias/default.mspx
Basically you will set up IAS with a RADIUS Client which would be your wireless access point(s). Then you will set up a remote access policy which will define how connections are authorized or rejected (windows groups, protocols etc.). Don't forget to register IAS with active directory.

Having issues with wireless phones disconnecting my wireless connection.

Hi, I need some help determining why my wireless connection keeps getting knocked off when the wireless phone is in use. I dont know if its any setting i may have but i couldnt find any. thanks a lot.

The phones may be using the 2.4 GHz frequency. You can find out the channel and make sure that the router's channel is +/-5 or get another phone using a different frequency.
The box said windows xp or better... So I installed Linux!

Wireless phones drop connection when multiples phones on same AP

I'm attempting to find a solution as to why wireless phones drop the calls when there are multiple phones associated with an AP. The BW usage of the phones is a small fraction of the available BW. Call quality is OK with multiple phone associations, and a single phone on an AP does not drop a call.
There doesn't appear to be any pattern associated with the dropped calls. Not every phone drops a call, but this happens frequently.
Thank you.

Are these Cisco APs? If so, can enable QBSS.
For Cisco IOS, enter "dot11 phone". For Airespace is called "AP CAC Limit" in the WLAN config. This will send a Channel Utilization value to the phone for that AP's channel. If 12.3(7)JA or later, this will be CCA based value showing true channel utilization. This is on a 255 scale, where default limit for calls is 105. Can still receive incoming calls though when > 105.
The phone call shouldn't be dropped though even if AP association is lost, unless some device is disconnecting the call due to not receiving any RTP packets (i.e. Cisco CallManager Express). If this is a 7920, go to the 7920 site survey to view the CU value. The last # displayed will be the QBSS / CU value. If this somewhat > 0 (i.e. 30+ or so) without any 802.11 traffic present, then may want to investigate what devices or causing this load on the 802.11 channel. An option could be to move to another channel as well. Ensure non-overlapping channels are used though per 7920 scanning mechanism and to ensure seamless roaming.
If these are 7920s, recommend using 3.01 fw.

New software on 7925G wireless phones stuck on speaker.

We are about to launch the newest software for the 7925G wireless phones. CP7925G-1.4.6.3
A few of them that we tested this on went right to speakerphone when turn on. The speakerphone symbol was showing on the display screen. Has anyone else experienced this?

There is a known bug with this firmare
https://tools.cisco.com/bugsearch/bug/CSCut25250/?reffering_site=dumpcr
You need to upgrade to one of the fixed releases.
HTH
Manish

Why does my $40 wireless phone work better than my airport?

I have a $40 wireless phone... ge... 2.4ghz... that works in any room in my home.
I have an $200 airport that doesn't work more than 10 feet away...
What is the difference that makes one work so much better than the other?
Are they completely differenct technologies, and if so, why wouldn't apple use the better one?
Don't get me wrong, I love apple and I love the airport when I am in the same room with it, but just don't understand why it can't work through a wall.
agp g4 1 ghz - titanium powerbook - airport Mac OS X (10.4.8)
agp g4 Mac OS X (10.4.2)

There are several things that affect wireless technology all through the spectrum of Bluetooth, LAN's, WAN's
Here is a site that covers all aspects of the technology. This should answer any questions you have.
http://wireless.utk.edu/overview.html
Don

Wireless Phone 7921G

Similar Messages

Maybe you are looking for