Wireless Print Nightmares..

Hi - It recently took me ages to suss out how to connect :
2 Macs
Airport Express
BT Wired Router
Samsung ML1630 wireless printer
I was trying to connect the printer straight to my Macs - didn't realise I had to connect them to my NETWORK... Anyway, all was fine until today, when I migrated to a different ISP (SKY)...
They gave me a wireless router, so, to keep my existing network settings (my PS3 is also connected to this Airport net) I turned off the wireless access point on my new Sky (SAGEM) router and plugged it into my AE.
Now, the internet is fine, but I can't print! I don't think the PS3 connects either... I looked on the routers webpage - it says it is blocking ALL incoming traffic, and there is no radio button to delete this rule... Also, I can't access my printers webpage even when I connect with a network or USB cable now!
I thought I had got my head 'round this, the wireless devices networking through AE. Where does the internet router come into it? Now I know I could use AE's print function but it is doing my internet, connected to a phone outlet, and the printer is on another wall across the room.
Any advice appreciated folks.
Cheers and best regards
mackers

Thank you for trying to help!
Well - Got it going - But don't know how...
Printed a network configuration page out from the printer itself... Showed it's IP, MAC, subnet addresses etc... Anyway, I clicked on the Bonjour button on Safari, my printer was there, and hey presto! Its web page was there! I did a test print and it worked. Looking back at the config page I noticed it had changed from the one I printed out last night - The printers IP address had changed from 192.168.1.10 to 192.168.0.6.... It normally has a static IP... How has it changed?
mackers

Similar Messages

Wireless printing on an HP LaserJet 1025nw

Any further information on wireless printing?. I have successfully set up wireless printing but when I try it on Touchpad I see the printer but am told it is not supported.
Thanks
Post relates to: HP TouchPad (WiFi)

Hi, Kappy. Thanks for the response.
Actually, it's neither article.
The one I'm looking for appears at the bottom of a help page (Mac Help) when I do a search on "compatible printers". It's listed in the "Open this for me" sdection at the bottom of the help page and is entitled "Printers compatible with Mac OS X".
When I click on that link, I end up at a web page that says "Looking for something on the Mac OS X site? The page you tried was not found."
This whole exercise is turning into an absolute nightmare!!! The day before yesterday, following the suggestions in one of the Apple documents, I re-installed the HP drivers from the supplemental installations on the Tiger DVD.
I then deleted the printer in the System Preferences and re-created it.
When I tried to print, in OS X, it printed without a hitch! I then tried an application in the Classic environment and this also printed without a problem. I figured that my problem was solved and had been solved by the re-installation of the HP drivers. I left the printer on, as usual, shutdown the Mac, as usual, and went to bed.
Yesterday morning, I figured I would confirm that my problem was indeed solved; just before leaving for work, I turned the Mac on, and tried to print. Guess what? It wouldn't print at all. Nothing happens other than what I've been getting since installing 10.5.2: "Waiting for device", etc...
Next step: I'll partition one of my drives, re-install 10.4 from the original DVD and won't apply any upgrades. I won't migrate any users either but will just create a dummy user. This should allow me to print, since this setup had been running without any problems for a few years. Then I can always re=boot from that system whenever I want to print... But what a hassle!!!

HP AIO Remote shows wireless printer offline when it is online and can print to it.

HP AIO Remote installed on my Windows 8.1 Yoga 2 shows my wireless printer is offline, when it is online and I can print to it wirelessly. How can I get it to recognize my wireless printer is online wirelessly? AIO Remote will only recognize the printer is online when the USB in connected to the Yoga 2.

Hi rpmcintyre,
Thank you for the additional information. I apologize for misunderstanding. I just want to confirm that the HP AiO app that you downloaded onto your Windows 8.1 computer is showing your printer as offline when you are able to print wirelessly to the printer.
I have two different documents for you. The first one is How to Use the HP AiO Remote App for Windows 8. It has a FAQ section at the bottom of the document with trouble shooting steps. I have also included the Supported Printers for the HP Scan and Capture App.
If the above documents don’t assist you, would you please let me know which make/model/product number of HP printer that you have? How Do I Find My Model Number or Product Number?
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

HP webservices tab not available when using HP Jetdirect 2700w wireless print server

I recently bought HP Laserjet Enterprise 500 m551 dn color laser printer with HP jetdirect 2700w wireless print server ( one day old at this time).
I was able to configure the device and enable/ use eprint services using the embedded server with a wired connection.
However when I attach a the mentioned wireless print server, the "Webservices" tab disappears from the configuration website, the printer reports that the eprint services are not enabled and ofcourse hp eprint or google cloud print do not work. The printer appears offline at eprintcenter. Everything else works fine.
On the product website for the wireless server, it clearly states that this is compatible with eprint services.
What am I doing wrong.
Arjun
HP Laserjet Enterprise 500 m551 dn color laser
HP Jetdirect 2700 w wireless print server
Win 7 Ultimate x 64
Netgear WNDR 4500

This seems to be a commercial product. For the best chance at finding a solution I would suggest posting in the forum for HP Business Support!
You can find the Commercial Jetdirect board here:
http://h30499.www3.hp.com/t5/Print-Servers-Network-Storage/bd-p/bsc-254
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

Resolution - Printing HP LaserJet & Linksys Wireless Print Server WPS54GU2

Hello Guys:
After trying to figure out for 10 days and calling HP, Applet and Linksys support, i finally am able to print to my printer.
I have iMac running Tiger 10.4.8. I have a HP LaserJet 1012 Printer connected in a USB Port to the Wireless Print Server WPS54GU2. This is what I did to get it working.
First install the following drivers:
1) Go to http://www.linuxprinting.org/macosx/hpijs/ and download hpijs-foomatic-2.0.2.ppc.dmg and espgs-7.07.1.ppc.dmg file. Install hpijs first and espgs second.
2) After that Go to Server Preferences, Double click on Print/Fax.
3) Click on the "+" sign, select Line Printer Daemon - LPD
4) In the Address field, enter the IP address of your print server.
5) In the Queue name (This is very important). I used L2 for USB. You can try P1, L1 as well. Not sure how you have connected to the print server. For me L2 worked. I had tried using L1 and P1 and it didn't work for me.
6) The Name field should automatically be populated.
7) In the Print Using, select HP and then select "HP LaserJet 1012 Foomatic/hpijs" as the printer or whatever driver you have for your printer.
8) Click on Add
And now open up text edit or something and you should be able to print.
let me know if there are any questions.

Try Repairing permissions (Disk Utility). Then restart, then add again.
What do you mean by the printer doesn't show up - the driver (print using:)?
You can try the generic HP Photosmart P1100 Gimp-Print driver that comes in OS X.

I have an wireless printer and a new wifi router. I have set the printer and iPhone / iPad correctly to the new router but when i try to print it won't recognise the air printer. Help. All was working fine on my old router

I Have a new wifi router and have set up my iPad / iPhone and wireless printer correctly to the new router but I can't print from the iPad and iPhone. It keeps saying ' no AirPrint printer found'. Help please!

Start with the most basic thing that you can try. Unplug the router from power for about 30 seconds, and restart the printer and the iPad and plug the router back into power.

Wireless printing to Canon MX310 fails using D-Link Router - Can't Connect

I recently bought a D-Link wireless router (320), which supports wireless printing and I am trying to set it up to work with MBP. I set it up to run with Windows XP and it works fine with no problems, but with my MBP it won't work. Here is a screen shot showing the XP set up and the printer server info from the router (bottom).
http://img338.imageshack.us/img338/1645/printerq.jpg
From this, I've been using the following information to add the printer,
Protocol: HP Jetdirect - Socket
Address: 192.168.0.1
Queue: lp1
The printer shows up as idle in the printer selection menu. When I print it goes through the following messages,
Connecting to Printer...
Printer Online...
Printing...
And then the queue clears itself as if it printed, but nothing ever comes out of the printer. At first I assumed it was a problem with the router, but when I tested it with Windows it doesn't have any hang-ups.
Any help would be appreciated with this, as I've read several posts and tried all recommendations but nothing will work. I'm also curious if I have the "Queue" in the printer dialogue right, or if it should be 9100. Thanks in advance!

Based on your Windows port configuration, your Mac printer queue configuration is reasonably correct. Although based on your Windows port configuration, you don't seem to require a queue name of lp1 - this would normally be required for LPD connections.
Your issue will be with the driver used. The Canon Mac drivers cannot be used when you have the printer connected to the USB port of a wireless router or print server (although the exception to this rule is an Airport device). When you have the printer connected via USB to a router or being shared by Windows, then you need to use a CUPS-based driver like Gutenprint or PrintFab (yes I know the Canon driver says CUPS but it is not true CUPS).
The Gutenprint tends to be the preferred driver because it is free, however your MX310 is not listed as a supported model so you would have to experiment with using a model that is supported and this can waste a lot of time and ink/paper.
PrintFab (www.printfab.net) costs 49 Euro but it does support your MX310. A trial version is also available so you could see if the printer does work before making a purchase.
One final note. For your Windows queue you don't need to add the colon 9100 after the IP address. The fact that you have selected RAW and have 9100 set for the Port Number is adequate.

Can not connect All in one 209b to new router for wireless printing....

Have an HP laptop and All in one priner 209b. All was working fine, wired and wireless printing. Then we had to upgrade our ATT Uverse router. Everything works...even wireless laptop and printer when connected to laptop. However, can't get printer to printer wireless since it has the old router info. I used the disk but when it asks to you to pick the printer, I choose the printer but it says printer now found ??? what ???? and this is with the cable connected. I do not have the wizard on the touch screen but I did reset to factory settings hoping it would load new router info but it does not. How do you manually enter router into for wireless printing. Is it best to delete the printer and reinstall as new...wired and then wireless ???
I am about to call an outsite company and pay the outrageous charge as the help on HP is not working. Thanks

Try this utility:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02114394&cc=us&dlc=en&jumpid=reg_r1002_usen&lc=...
007OHMSS
I was a support engineer for HP.
If the advice resolved the situation, please mark it as a solution. Thank you.

Can not connect my wireless printer to the new router.

Can not connect my wireless printer to the new router.

Can you please provide details:
1. The make and model of printer
2. Make and Model of Wireless Router
3. Is your printer connection wireless to router or a cable to PC
4. What have you done or attempted to do to establish a connection?
5. Any further info to assist

How do I connect a wireless printer with my ipad 5.1?

How do I connect a wireless printer to my iPad?

If its listed as 'airprint enabled', then you can follow the steps in this article:
http://support.apple.com/kb/HT4356

Hp - photosmart e-all-in-one wireless printer cn731a- nothing prints??

HP - Photosmart e-All-in-One Wireless Printer (CN731A)
Went through setup on Windows 7 64-bit, printed the test photo, came out great. Thought everything was good to go. Later, when trying to print a document, it wouldn't print. Computer popped up a message saying "Successfully printed" but when I went to the printer, there was nothing there. I tried running a wireless network test on the printer's screen, and once that page printed with the results, immediately after that, the document I was trying to get finally printed. This was an early Christmas gift for my parents, & my mom just informed me that she tried to print again today, but nothing happened on the printer. I am out of town now and am not able to troubleshoot on my own on the printer like I did a couple days ago so came here for advice.. Any idea what the issue might be? Did I maybe miss a step after doing the test print of the photo? Any ideas would be appreciated!

Hello,
Try the below steps ..
While the printer is ON, Unplug the power cord from back of the printer.
Disconnect all the cables that are connected to the printer.
Wait for 30 seconds.
Plug in only the Power Cord. ( Printer would Power on ).
Try making a standalone Color copy of a document . If it fails to print a copy, then it could either be an issue with the Ink cartridges or the Printer .
Regards,
Jabzi
Help the community by marking this post .
Was your question answered? Mark it as an Accepted Solution!
See a great post? Give it a Kudos!
I work for HP
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

How do i connect my macbook air to a wireless printer as there is no cd slot

I have a wireless printer and it has a CD to insert into the computer to connect it but i have a macbook air....and therefore no CD slot. what can i do? thanks!

lindsay397 wrote:
I have a wireless printer and it has a CD to insert into the computer to connect it but i have a macbook air....and therefore no CD slot. what can i do? thanks!
This might help:
http://support.apple.com/kb/HT3500

Wireless printer does not work after update

I have VM fusion running on my MAC with a wireless printer enabled on my MAC. Prior to the security update, the printer worked seamlessly. Since the update, I can no longer "see" the printer in Windows XP. Any suggestions?

More information.
Wireless Connection Problems - Fix
Wireless Connection Problems - Fix (2)
Wireless Connection Problems - Fix (3)
Wireless Connection Problems - Fix (4)
Wireless Diagnostics - About

MacBookPro cannot find my HP wireless printer.

I have a HP8600 Plus wireless printer. I recently bought a new airport extreme, which is working ok. When I try to reconfigure my printer, my Mac cannot find it. Report says I should disable MAC address. How do I do this?

From the Canon website: "Printer firmware update is necessary for AirPrint function. Certain exception may apply. AirPrint functionality requires an iPad, iPhone 3GS or later, or iPod touch 3rd generation or later device running iOS 4.2 or later, and an AirPrint-enabled printer connected to the same network as your iOS device. A printer connected to the USB port of your Mac, PC, AirPort Base Station, or Time Capsule is not supported. "
Sounds like you need to update the firmware.
Oh and here is the website to do that at: http://usa.canon.com/cusa/consumer/products/printers_multifunction/photo_all_in_ one_inkjet_printers/pixma_mg5320

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

Restart your WiFi router and printer by removing power for 30 seconds.

Wireless Print Nightmares..

Similar Messages

Maybe you are looking for