Wireless Printer about 25-30 feet from Time Capsule Will it work?

Hi I will be placing my Wireless Printer in another room which will be appoximately 25-30 feet from my Time Capsule. Will I be able to copy, scan, and print from my Mac Pro? Thanks
Message was edited by: Stuart Lawrence

Stuart Lawrence wrote:
I set my printer up but it won't seem to print from the computer. I didn't know this at first but apparently when first setting it up you have to plug a usb cable from the printer into the computer.
That doesn't sound right. Read and follow Canon's instructions carefully. It seems that configuring it via USB will cause your computers to expect it connected that way. If you want to use it wirelessly be sure you follow instructions for that method and ignore instructions for connection via USB.
I installed the driver's and software, I followed the instructions, it searched for my network, I wasn't sure if I should select "WPA or WPA 2" so I tried both.
it asked me to type in my network password but I had forgotten it so I selected "guest network" I then unplugged the printer from the computer, it said that the wireless connection was good but it still won't print.
I don't have a wifi card in my computer, would that make any difference? Under Print & Fax my Canon printer is listed there.
I'm confused about this. If you're trying to communicate wirelessly, your computer needs to be wireless.
You need to go about this more methodically. Your network name, password, encryption type, etc must all be 100% correct, all of it. If you've forgotten one or more of these parameters, you'll probably want to reset your network hardware and start all over again.

Similar Messages

Time capsule: will it work wirelessly without disrupting my wireless system?

Time capsule: will it work wirelessly without disrupting my wireless system?

This type of setup is difficult, and not officially supported by Apple for good reason.
Before you attempt this, you should know that this type of setup will require a "double hop" wireless connection for backups.
In other words, for your Mac to back up, the wireless signal must travel from your Mac to your wireless router......hop one.....and then travel from the wireless router to the Time Capsule....hop two.
This doubles the chances of an error occurring and unfortunately also doubles the amount of time that it will take for a backup to occur.
I've tried this type of setup a few times as an experiment. It gives new meaning to word "SLOW".
In addition, the Ethernet ports are disabled in this type of setup on the Time Capsule, so it is not possible to use them for any purpose.
Bottom line....the fact that the Time Capsule can possibly be configured this way.....does not in any way imply that it should be configured this way.

Restore from Time Capsule slow not working properly help!

I bought my time capsule about two weeks ago. I have backups from most of those days on my time capsule. Since then I had to clear my hard drive and re-install my operating system. I did not think this was a big issue since i had the backups on my time capsule. However, whenever I try to do anything with a restore it is EXTREMELY SLOW. I only once got it to where it said it would restore, and I had and estimated time of over 15 days. That is just not even reasonable. I have tried restoring from several sources: restore from backup (after booting from disk), migration assistant, time machine. They all are very very slow and I only have about 100gb that was backed up. Does anyone have any tips on how to get this working. I have spend over 6 hours on tech support. I am connect via ethernet cable and I just do not understand why this is so slow.

I bought my time capsule about two weeks ago. I have backups from most of those days on my time capsule. Since then I had to clear my hard drive and re-install my operating system. I did not think this was a big issue since i had the backups on my time capsule. However, whenever I try to do anything with a restore it is EXTREMELY SLOW. I only once got it to where it said it would restore, and I had and estimated time of over 15 days. That is just not even reasonable. I have tried restoring from several sources: restore from backup (after booting from disk), migration assistant, time machine. They all are very very slow and I only have about 100gb that was backed up. Does anyone have any tips on how to get this working. I have spend over 6 hours on tech support. I am connect via ethernet cable and I just do not understand why this is so slow.

After System restore from Time Capsule Mail doesent work

HI
i resored my Time capsule backup on my mac because of the need for space to install windows on my mac (Boot camp doesent works!) i can use all my programms and data well exept Mail when i start mail it Flashes:
You can’t use this version of Mail with this version of Mac OS X
You have Mail version 4.0 (1075/1076). It can’t be used on Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button.
(help button is online help....)
But its just a 1to1 backup.....
Can anyone help me??

Blinkyrus wrote:
i restored my Time capsule backup on my mac because of the need for space to install windows on my mac (Boot camp doesent works!) i can use all my programms and data well exept Mail when i start mail it Flashes:
You can’t use this version of Mail with this version of Mac OS X
You have Mail version 4.0 (1075/1076). It can’t be used on Mac OS X Version 10.6.1 (Build 10B504). For more information, click the Help button.
(help button is online help....)
The first thing I'd try is to download and install the Mac OS X 10.6.1 updater:
http://support.apple.com/kb/DL930
It would have been more appropriate to post your message in one of the Mac OS X 10.6 message sections.

My Time Capsule will not work through Time Machine but need to back up because my hard drive is corrupt. I hard-wired it to my MacBook Pro and have been dragging files to capsule in finder window. Will I have problems since it's flashing yellow constantly

My Time Capsule is constantly flashing yellow and it will not preform periodic back-ups. When I tell it to from the icon on the top task bar, it freezes MacBook...every time. I am now dragging files from internal HD to TC found in Finder after hardwiring it to laptop treating it as an external HD. Can in trust it to store files and photos as my MacBook is telling me to back-up because my internal HD is corrupt and may need replacing?
Thanks in advance.

A PC can have more issues connecting than a Mac.
But it really should not matter.. so just try it in situ.. press and hold the reset.. once it starts up, it will return to default IP, 10.0.1.1 the PC should then be able to find it via the airport utility.
If not drag it over to the Mac and plug in there by ethernet.. or since it is a laptop, really should not be that difficult to drag the Laptop and plug it into the TC.
Important thing is to get access to the TC.
The Mac if it is running lion, then you MUST download and install 5.6 airport utility to do anything useful.
http://support.apple.com/kb/DL1482

My time capsule will only work with one device at a time

I just purchased the Airport time capsule. I have it set up with my imac, but I also run a macbook air, older macbook, PC laptop, PC desktop, wii, xbox, and 3 iphones off of this device. My issue is that my ISP does not serve more than 1 IP address and with previous routers, the IP address they recognized was only on my router. Now, each time a new device tries to use the internet, my ISP is bypassing time capsule and recognizing the device IP address. It's very frustratitng! How do I set up my Time Capsule so that it's IP address is the only one my ISP recognizes, but all my devices are able to run off of the Time Capsule as the router. (obviously I am not over educated in this area so solutions in simple language are greatly appreciated!) Thanks!

I read the same solution somewhere else in the forum but it does not solve my problem. When I set up the Airport, it sets up in bridge mode by default. When I contacted my ISP they said it needed to be in bridge mode (their rationale is that they only allow 1 IP address). I just switched it to DHCP and NAT and this is what the default settings go to:
After I update it with these settings my internet won't work at all and this is the error message I get:
Any suggestions?
My internet "Digis". www.digis.net. They are a smaller company and put a dish on my roof. The modem is very small, does not have a router.

Anyone else had success with Kodak 5100 printing from Time Capsule?

So I recently bought a Time Capsule and until now have been happily printing from USB port on PC and now on Mac.
We were going to buy a wireless printer but found out that the Time Capsule supports that capability by connecting a printer to the USB on the Time Capsule.
So, set it all up, connected my Kodak 5100 and it appears to see it and lists the printer in the print utility on my Mac as location "Time Capsule".
Printer is on, paper in, ink levels ok.... print a test page and my Mac thinks it's printing but the Kodak 5100 Easyshare (!!) is doing nothing!
Having searched the blogs for a while, and mindful that the Kodak 5100 is a couple of years old now, I eventually found a solution that appears to work!!
You can download an older software for the 5100 here http://www.userdrivers.com/Printer/Kodak-All-in-One-Printer-Software-3-5-for-Mac -OS-X/download/
I have to thank someone else for suggesting this back in 2009 on another post on this forum but I can't find the post so thank you whomever it is, this still works! When you set up the driver, you need to select that you are connecting to the printer through another Mac - I think the only other option I had was to select USB connection. Once you are in, you'll notice that the software is not as user friendly as the latest versions but if you can print wirelessly from your Mac, then I'd like to think you won't care about the UI of the printer software!
I've only just done this and tested with a colour excel from MS Excel for Mac so will let you know if anything else doesn't work!

I've tried using an ethernet connection. It does work faster and I seem to get more files over, but it STILL eventually hangs. I've given up with Time Capsule and now backup to a Lacie 1Tb disk. It would nice to know what is going wrong you Apple guys!

I CANNOT PRINT FROM MY IPHONE 4 TO MY BROTHER 8890DW PRINTER WHICH IS CONNECTED TO MY TIME CAPSULE/NETWORK VIA ETHERNET CABLE???

Why can’t I print from my iPhone 4 to my brother 8890dw printer which is connected to my time capsule/network via ethernet cable??? My iPhone does not even locate my printer,even though I have no problem printing from my Mac to the same printer.

Typing in all caps indicates shouting, is considered rude and is difficult to read. Many simply do not read such posts.
You would need an airprint enabled printer or an app that proides printing function.
iOS: AirPrint 101

How CAN I PRINT FROM TIME CAPSULE?

I've set up Time Capsule through Airport utility and Time Machine but had some problems doing so. Consequently, it was set up with print cable still hooked to iMac. Now that Time Capsule is functioning as a backup for my files, I've tried to print from Time Capsule to my HP PSC 1610 printer. I've transfered my print cable from iMac to Time Capsule and tried to make any changes necessary to print from it. But it doesn't work. What am I possibly doing wrong? I've tried following page 28 of Time Capsule setup guide (If your printer isn't responding) but that has not helped.
- Wayne

See my reply to your previous post with the same question.
Please do not double post questions on the community support area.
Thanks!

How do I print from time capsule

I plugged my printer into the usb port on my time capsule... now what?

Open System Preferences (gear icon on the dock)
Open Print and Fax
Click the + (plus button at the bottom of the printer list)
Does the name of your printer appear in the next box?
If yes....click the printer name to highlight it and then click Add at the lower right of the window
Try to print. Be sure to select the "correct" printer since you likely have it installed twice in two locations at this point...at your computer...and at the Time Capsule. You must choose the correct location in the print dialog window.
Note....if you have an All-in-One type of device, only the print function is supported at the Time Capsule location. If you need to copy, scan, fax, or perform maintenance checks, you will need to connect the device directly to your computer and restart the device.
If no.....your printer software has not been installed. Contact the printer manufacturer to download the latest printer drivers for your device. If still no luck.....not all printers are compatible, so that may be the case here.

Restore from Time Capsule after Hard Drive Crash

The HD on my iMac crashed Christmas Day. I have been running backups on Time Machine to a Time Capsule since I purchased the iMac (and also backing up a MacBook Air), but never had any occasion to see if it worked.
I yesterday got the computer back with a new HD installed. When I tried to do the restore from Time Capsule from the Setup Assistant which ran on start up, I could not get past the initial screen. It kept hanging up on "Opening Time Capsule," and then on one occasion it found only the MacBook Air back up volume.
After some research here, I tried running the utility after booting from my Snow Leopard disk. This time, it immediately found the backups from both computers, but hung up on opening the iMac backup.
After more research, I ran the disk utility and repaired the HD on the iMac. It finally worked -- I woke up to a "Restore Complete" message (it started around 10:00 pm last night). The iMac started up without a hitch to the way it looked Christmas morning. The only problem I have noticed is that my most recent events in iPhoto are empty. The thumbnails are there, but no pictures. I tried to rebuild the library using iPhoto Library Manager, but no luck. Any ideas?
The other thing I noticed is that I had to reauthorize the computer for my iTunes purchases. Will Apple fix that so it doesn't chew up my last remaining authorization?

think about the speed of wifi here
speed at 802.11n = a theoretical 540Mbps (less in real world scenarios)
Mbps = Mega bits per second
MBps - Mega bytes per second
8 bits = 1 byte
8 mega bits = 1 mega byte
How long would it take you to download a 1 gig file from the internet wired into your modem? About 10-20 min? And that is taking into account that the info is being uploaded hardwire. Now imagine that same file over wireless in your home being upload by the Airport card in your computer. People over look upload speed when considering these things. The wireless upload speed of your Airport card is what is limiting this. Just a limitation of the technology, not a fault of Apple just stating the numbers here.

Data transfer from Time Capsule to new Mac

I have a MBP which up until 7 days ago had Mountain Lion on it. The week before that, i had major abdominal surgery and when i was in the hospital, i accidentally knocked a bottle of water over and it fried my MBP. I would not turn on after that.
I took the MBP to the Apple Store for it to be repaired, at a cost of about $800. Meanwhile, i bought a new MBP. Both computers are the same with 2.5Ghz intel processor Core i5. As far as i know, the only difference is that the newer one has a 500GB HD and the older one has a 1 TB HD, and the older one ran Mountain Lion while the new one came with Mavericks.
I had the older computer backed up on a Time Capsule. When i got the newer one, i turned it on and went through the set up process. When asked at the beginning if i wanted to transfer stuff over from another computer or drive, i said 'ask me later' or something like that. I have never used Migration Assistant before and did not understand it well enough to use it.
I transferred the backed up data on Time Capsule to the new computer wirelessly. It worked fine. When i got done,
the hard drive looked like the old one, same set, same files on the desk top, dock arranged the same way, same Safari bookmarks, and also, the same third party
programs and data, with one exception, but for the most part it was the same.
Since i set up the new computer, it has been having regular back ups onto Time Capsule.
Now, i have the older computer back, repaired. The older computer no longer has Mountain Lion. It has Mavericks OS 10.8.5. The newer computer has OS 10.9.3.
I want to do the same thing i did a week ago in order to transfer the data to the older now repaired computer, but i can't remember what i did, i'd never transferred data from Time Capsule before. I have not been in the best shape mentally, having been cut open with a 10 inch incision and pain pills.
All i know is that whatever i did, it was very easy, i believe i used Time Machine to do it, and it transferred my third party programs with their data. It did NOT involve using Migration Assistant.
I don't plan on using the newer computer. i plan to go back to using the older one which has the larger hard drive.
Both computers have the same user account names and login info. I just want to replace what is currently on the older freshly repaired MBP with what is on the Time Capsule.
I am not sure if my question is very clear but i'm wondering if anyone can tell me how i can transfer the data from my Time Capsule to my older now repaired MBP without using Migration Assistant (which i think would not transfer my 3rd party stuff). i just want to do what i did a week ago but can't remember what i did. I think i used Time Machine, i connected the computer and Time Capsule (or they were already connected wirelessly).
I did NOT choose Enter Time Machine. I think i went in to Time Machine Preferences and clicked on 'Select Disk.' I think i selected a disk that has the name of my Airport connection and has the word Data on it. Does that sound possible?
Does anyone know what i'm talking about from experience or other knowledge? because i'm inexperienced with this process and am not very clear about what happened, but i know it didn't involve Migration Assistant and it didn't involve Time Machine > Enter Time Machine, because i have never seen those before today.
Whatever i did, it was so easy, just click on the disk i wanted to transfer data from and click some button that meant "ok" or "connect" or "transfer." And then, just wait, and after some time, my computer was set up reflecting the back up from Time Capsule, including third party stuff.
Thanks for any help with this.
btw, in Time Machine now, under Select Disk > Back up disks, there are two boxes. The first box says Backup Disks, and in that box is the name of my Airport connection, i.e. the Time Capsule i guess, and on the icon, it says Data. In the second box, it says Available Disks, and in that box, it has an icon of a disk with the name of my Airport or Time Capsule and it has an icon of a Wifi symbol which has the name, Other Time Capsule. Apparently that is an option to set up another Time Capsule not listed. I wonder if i chose one of those icons and clicked "Use Disk", would that data be transferred to my now repaired computer?

(Sorry, after i posted this, i discovered it posted it in the wrong product forum, i guess when i typed in what i was interested in, it just took me to the Snow Leopard forum. i don't see a way to delete my post. Maybe the answer will be the same?)

Full Restore from Time Capsule after hard drive failure

Authorized agent replaced hard drive after it failed. Installed 10.5.5 and currently attempting to do a full restore from Time Capsule - progress is slow and in question after 22 hours. The backup size approx. 100 gb.
Screen reads "Transferring Information" at the top, progress bar is moving, and bottom of the screen reads "Looking for applications and documents to transfer" and hasn't changed for 22 hours.
Is this normal? how long should 100 gb take to restore?

think about the speed of wifi here
speed at 802.11n = a theoretical 540Mbps (less in real world scenarios)
Mbps = Mega bits per second
MBps - Mega bytes per second
8 bits = 1 byte
8 mega bits = 1 mega byte
How long would it take you to download a 1 gig file from the internet wired into your modem? About 10-20 min? And that is taking into account that the info is being uploaded hardwire. Now imagine that same file over wireless in your home being upload by the Airport card in your computer. People over look upload speed when considering these things. The wireless upload speed of your Airport card is what is limiting this. Just a limitation of the technology, not a fault of Apple just stating the numbers here.

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine. Any ideas on how to get 5.0 working?

When I switch my time capsule to 5.0ghz mode the range of my wireless network drops significantly. Near the Time Capsule my Macbook Pro works fine, in my bedroom I have almost no signal. In mixed mode it works fine both placed. Any ideas on how to get 5.0 working? I thought 5.0Ghz was supposed to have a wider range. Do I need to change a setting on the Macbook Pro?
Thanks, W

I'm not sure if you understand that 5 GHz has some upsides, but also some very significant downsides.
The upside is that the 5 GHz signal will allow faster speeds.
The downside is that you must always give up something in order to gain something else.Unfortunately, the marketing hype about 5 GHz does not go into very many details about this.
In the case of 5 GHz, the 5 GHz signals are much weaker than 2.4 GHz signals, so they do not travel as far or penetrate any obstructions like walls or ceilings nearly as well as 2.4 GHz signals. In many cases, in order to get good 5 Ghz performance, you literally have to have almost a line-of-sight relationship between your computer and the wireless router.
If you have a new dual band router, which broadcasts both a 2.4 GHz and 5 GHz signal simutaneously, your Mac will connect to the best signal quality automatically depending on its location in relation to the router. In the same room, without any obstructions, it will connec to 5 GHz. But, take the laptop down the hall a few rooms and around the corner and the Mac will connect to the 2.4 GHz signal because at that location, the 2.4 GHz signal is not only stronger, it is also faster.

I have lost my calendar data and am having a hard time retrieving it from Time Capsule. Can anyone help? I am using Mountain lion OS

I have lost my iCal data and am having a hard time retrieving it from Time Capsule. I am using Mountain Lion OS om iMac. Can anyone help?

You cannot see it because it is hidden.. one of those great things apple does.. if it is hidden in your Mac then it will be hidden in the Time Machine Backup.
You will need to restore the entire folder to a different location.. and unhide it.
There is some info here about restoring particular files or folders.
http://pondini.org/TM/16.html
And some info from Lion which should also relate to Mountain Lion.
https://discussions.apple.com/thread/3231381?start=0&tstart=0
There is stuff about recovery near the end.
One wonders sometimes when Apple make these decisions if they ever think about what happens when something goes wrong. Hiding files..???

Wireless Printer about 25-30 feet from Time Capsule Will it work?

Similar Messages

Maybe you are looking for