Wireless Printer connection to Time Capsule

I have a Canon Pixma MP620 wireless printer that I'm trying to connect wirelessly to my Time Capsule. Is there a way to do this using the touch button method? Most access points have a button that can be pressed to receive a signal from another wireless device so they can sync but I haven't seen anything like that on my Time capsule

So you plugedd the printer into the time capsule usb right?
You need to re-add the printer in the system preferences one more time because the location has moved.

Similar Messages

Set up printer connected to Time Capsule via USB and print without WiFi

Is there any way to do this? We use a Time Capsule for daily backups, for both Mac and PCs, and have a printer that we would like to share between all of them. Before, we had the printer connected to a PC as this allowed both PCs and Macs to print to it, but of course the PC had to be on. For whatever reason, when we plugged the printer into a Mac, the PCs couldn't connect or print.
From what Apple has told me, I have two options:
1. Share the printer via WAN, which is not desirable, as any other office could then print to our printer.
2. Create a hidden, password-protected, wireless network. This causes problems for two reasons. Firstly, we are not permitted to "extend" the network, and by creating a wireless network and attaching it onto the ethernet network, we are basically doing that. Secondly, if we did create this wireless network, computers that connected to the network to be able to see the printer would then default to the wireless network for internet access, rather than the ethernet connection.
If I am misunderstanding something, or someone has an idea of how to password protect a printer connected to a Time Capsule without using wifi, I would greatly appreciate it.

Sharing via WAN through the Time Capsule, for whatever reason, is not password protected. Any computer in our building can see the printer, and use it. When we were sharing the printer through the PC / Bonjour, when setting up the printer on a new machine, a valid username and password from the connected PC was required.
I should add that the purpose of trying to share this via the Time Capsule, rather than the PC, is that the Time Capsule is always on, and we notice an increase in performance when the PCs are powered down regularly.

Wireless printing with Brother - Time capsule

I try to get my printer Brother DCP-J715W up and running, but I can't connect to the router, Time Capsule.
Any suggestions? Is it a problem with WPS or AOSS, don't know exactly what it is, but that's what the error report says ...
Tx, Aldert

Using extend a wireless network on a TC wirelessly is a major no no and I quote from the web
Wi-Fi extenders (sometimes called wireless repeaters) seem like the obvious choice for helping a wireless router cover an entire house with Internet access. Essentially, they pick up a wireless signal just like your tablet or laptop, then rebroadcast that signal, giving you a second access point to connect to. But there’s a big problem with that which kind of cripples the functionality of extenders. Networking expert Tim Higgins wrote this about extenders on SmallNetBuilder in 2011:
“No matter what they are called or technology they use, repeaters start out with a minimum 50% throughput loss. The reason is that a repeater must receive, then retransmit each packet using the same radio on the same channel and with the same SSID. If the repeater is very efficient, then your loss will be close to 50%. But if it’s not, throughput loss can be higher.”
This is why I think you have to restart with cabling to the TCs

Printer connection after time capsule install

After installation of Time Capsule, none of the wireless printers on the network are recognized. Can they be setup or reconnected on my computer (iMac) or is that setup on each of the printers?

You setup printers on the printer..
The usual method is to connect to the computer by its usb port.. then use the CD that came with the printer for the installation wizard and setup wireless on the printer to work in infrastructure mode with the TC.. you can also use WPS method.. WPS is very well hidden in the TC or any of the apple products.
Most printers now have WPS.. you can use pin method.
Remember most printers are SMB devices.. so keep wireless name compatible.. short, no spaces pure alphanumeric. Not apple spaces and apple apostrophe.

Canon printer connected on Time Capsule won't print from the PC

Hi all !!
I just bought a small printer, Canon MP250.
Connected it to my Time Capsule. Works fine on wifi with my Mac.
But with the PC (connected by ethernet).... it sees the printer, but won't print.
Bonjour installed, firewall desactivated.
Any tips/suggestion/link/idea ?
Thanks for any help !

Here's the Canon's response (sorry, in French). I'm happy that Canon answered personnaly & very quickly to my questions. That's a great support.
Lors du partage d'une imprimante en réseau, Windows utilise un port virtuel et non local, en USB l'ensemble des imprimantes sont configurer en port USB virtuel, Windows peut donc transférer les données vers un autre port virtuel.
Pour la partie scanner, le port est un port USB physique afin de gérer l'alimentation du scanner (puissance de la lampe), il vous faut donc un utilitaire qui vous permet de rediriger le flux de donnée réseau vers le port USB.

Why does my printer connected through time capsule only print once after powering on then never again?

Hey,
I have a TimeCapsule which is logging in to my wireless network (i.e. it's not extending it, neither is it serving its own network). I have a Brother HL-2030 connected to it (via USB). I have two issues:
* the printer will only print directly after plugging in the USB cable to the TC, but only once. Subsequent attempts to print would not succeed. Disconnecting and reconnecting the USB cable will help, again, only once. The printer works flawlessly when directly connected to my MBP.
* the TimeCapsule is not found by AirPort utility, and neither am I able to apply a software update to it. Configuring it to extend my WLAN does not work reliably.
Does anyone have an idea what might be wrong here?
Regards,
Matthias

Thanks for the hint. I had thought about that, too. It was the easiest to configure the network this way as the modem is provider pre-configured. But I need to see if I can get to bridged mode. There's an additional problem with the location of the device in the building...
The printer had worked through the TC when it was the router (with my previous provider) and served the WLAN. Thus I don't see where the difference should be, particularly as I believe the printer is served via IP and thus it should IMHO not matter if the TC serves the WLAN + device or only the device.

How do I connect my Time Capsule on my modem wirelessly?

I already have a modem that I use to access the internet wirelessly on my macbook. Is there a way that I can connect my Time Capsule on this modem without having to use an enthernet cable?
Thanks!

So you are saying that if I use the AirPort Extreme Base Station I would be able to connect my TC wirelessly and expend my wireless signal at home?
No, please see my previous answer.....
and then use it to expand the internet signal.
That is not possible. The Time Capsule could "extend" the signal only if it is provided by another Apple router.
What I did say was.....
When the Time Capsule "joins" a wireless network, it simply connects to the network...like another computer. If you configure the Time Capsule this way, it becomes a wireless hard drive. it performs no routing functions and it will need to be located where it can receive a strong wireless signal from your main wireless router.
I am not recommending that you set up the Time Capsule this way, but will provide the steps if you want.
So, to clarify....
The Time Capsule can be configured to "join" your existing wireless network. It will not extend or expand the wireless network. The Time Capsule becomes a wireless hard drive in this type of configuration.
I do not recommend this type fo setup for most users because it is difficult to configure and limits backups to wireless only. You will not be able to connect to the Time Capsule using Ethernet to backup, which is much faster than wireless.

Can not print from my pc using time capsule's printer, but the mac in the office will. PC sees the network just not the printer connected to the capsule.

I can't get my pc to see the printer connected to the time capsule, it sees and connect to the network but will not see the printer. The mac in the office see both the network and the printer connected to the capsule.

Suggest that you check to make sure that you installed Bonjour Print Services for Windows v2.0.2 on the PC.
Run the program and hopefully it will find your printer so you can select it and click to get things going.

We traded our home internet service for a Sprint Hot Spot. The hot spot does not have an ethernet port to connect through. Can we connect our time capsule to the wireless hot spot?

Hello, we switched our home internet service from an ethernet modem to a wireless hot spot.
Do you know if there is a way to connect our time capsule to the hot spot?
Everything I read only suggests connecting through an ethernet cable. I'm hoping there is a way to do this.
Any help would be appreciated!
Thanks!!!

No you can't join a wireless hotspot with a Time Capsule directly via it's 'join' option (tried and failed - well to be exact it kinda works but the Time Capsule's ethernet ports no longer work).
What you can do is buy an airport express and use it's 'join' option to connect to the iPhone's hotspot. Then you connect the airport express via ethernet to the time capsule (in bridge-mode).
You can then connect your computers to the time capsule via ethernet or use it's wireless function to set up wireless network (with a different name to that of the hotspot) that your wifi stuff can connect to.
Thingi

I have a wifi router already. Can I connect a time capsule to that wirelessly?, I have a wifi router already. Can I connect my time capsule to that wirelessly?

I Have a wifi router which is located in my brothers bedroom. Now I am buying a iMac. Along with it I want to buy a time capsule which I want in my bed room. Is it possible to connect the two wifi routers wirelessly?

The Time Capsule can be configured to "join a wireless network" so backups will occur over the wireless network that is being provided by the wireless router in the other bedroom.
Things will be fine as long as there is a strong wireless signal where the Time Capsule will be located.
But...the Time Capsule cannot "extend" the wireless network or provide more wireless coverage...unless...the other router is also an Apple product.

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages sometimes. How do I fix?

I have connected my time capsule to motorola SG6580 modem via ethernet. I have a wireless network on the motorola and a wireless network from the time capsule. I get duplicate IPs error messages (no connection) sometimes when trying to connect devices to the wireless network. How do I fix? Sometimes devices cannot connect to the network because of conflicting IPs. I look on the Motorola and every device has a unique IP assigned but occasionally a device has taken the IP of another device. I have been writing down all the devices and the IPs they have been using. It happens more with PCs than Macs, ipads or iPhones.

If the Time Capsule is set up correctly in bridge mode, then it is the responsibility of the Motorola modem/router to provide the correct IP address assignments for all devices on the network.
Check to insure that the Time Capsule is correctly set up to operate in bridge mode as follows:
On your Mac, open AirPort Utility
Finder > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click Edit in the smaller window that appears
Click the Network tab at the top of the next window
Insure that the setting for Router Mode is configured to read "Off (Bridge Mode)"
Once you have confirmed that the Time Capsule is configured correctly, everything else is the responsibility of the Motorola modem/router as far as network routing and IP address assignments for devices.
If you continue to have IP address issues, then you should contact the Internet Service Provider (ISP) that provided the Motorola device to you and ask them to fix the issue.

HT1178 I just bought an Airport Time Capsule. I already have a AirportExtreme for my wireless network for my home. Which would be better; connect the time capsule up to the extreme or use it as the primary base station?

Is it better to connect my Time Capsule up to my existing wireless network or use the Airport Time Capsule as the base unit and start over again by creating a new network?

There is no end of answers to this..
But if you want AC wireless.. assuming you bought a new TC.. and the Extreme is the older N model.. then simply make sure the TC is as close as possible to where wireless AC client will be used.. and connect it back to the main router whichever that is, by ethernet.
If both are AC then it will make no difference.
As long as you can connect them both by ethernet and not use wireless extend.. it won't make much difference.
The worst case is where you use wireless extend and expect high speed but totally lose it because of your bridge link.. if that is the case you wasted your money and you can return the TC and buy a hard disk and plug it into the AE.

Setting up wireless connection to time capsule

Does anyone know how to fix this? I am replacing my airport extreme with a Time Capsule. The lan connection works fine with our laptop, but not the iMac. I had an ethernet cable connected when I first set up Time Capsule via the iMac, and now the iMac only connects to Time Capsule when the ethernet cable is connected. The wireless connection is not recognized, even though it is set up.
Any ideas?

Naline wrote:
Does anyone know how to fix this? I am replacing my airport extreme with a Time Capsule. The lan connection works fine with our laptop, but not the iMac. I had an ethernet cable connected when I first set up Time Capsule via the iMac, and now the iMac only connects to Time Capsule when the ethernet cable is connected. The wireless connection is not recognized, even though it is set up.
When you say "the wireless connection is not recognized", do you mean that you can't see the network under the AirPort menu bar item?
It's not guaranteed to solve your problem, but you might try the three suggestions in the second message of this thread:
http://discussions.apple.com/message.jspa?messageID=10445592

I created a wireless network with my Time Capsule but would like to connect this network to a WiFi Hotspot for Internet Access

I have created a Wirelss Network at home with the Time Capsule and would like to connect this network to the Internet.
I can't use LAN Cable to connect to it anything becasuse I usually use the WiFi that runs through my building.
Can I connect the Time Capsule to the WiFi hotspot somehow so that all computers on my network have Internet access and if so, what do I need?
I need this done because the computers can only be connected to either the WiFi network or to my Time Capsule Network at any given time.
Or is there a way to be connected to both networks simultaneously?
I have two PC's and two Macs.
Thank you for any support and I apologise for my ignorance. I am not too good with networking.
I have tried the silliest of things like connecting a router to the TC only to then realise that the TC had an inbuilt router.
I tried connecting a USB WiFI adapter to the USB Port on the TC but it doesnt detect it that way apparently.
Please help!

I have a kinda same problem @ https://discussions.apple.com/thread/3531642
Please reply (somebody)!
JeremyZ

Time capsule 2TB,connected to mac mini server leopard, LG DP1W mediacenter/player for watching movies on my tv from my harddisk tower connected to time capsule by usb/hub on G-technologie 8 TB G-SPEED Q RAID-oplossing(hard disk tower) is this gonna work??

hello,
ik have a question about the hardware i wanna buy
i have a IMAC that is 3 years old and running on leopard snow 10.5, i want to upgrade the software from this mac to 10.6 and put 4GB workmemory into it, i have now 1GB.
I have ordered a MAC MINI SERVER leopard snow 10.6(also ordered a dvd superdrive, wireless typing, and a wireless mouse for the mac mini)
i have ordered a Time Capsule 2TB
i want to connect to the Time capsule this:
G-technologie 8 TB G-SPEED Q RAID-oplossing (hdtower)
UPC of EAN nr.: 705487185744 in the mac store
i want to connect to the Time Capsule this for my TV to play movies from the harddisktower connected to my time capsule:
LG DP1W MEDIAPLAYER/CENTER without harddisk build into it, with WiFi connection butt, i'm gonna use te 2.0 USB connection that is faster and stabile.
-Connecting the Time Capsule to the Internet
i'm also gonna use this: gear4 PG467 UNITY REMOTE(control everything with iphone)
i'm also want to connect by 2.0 USB my canon all in one foto printer, WiFi is not working properly and i have many times problems with connection my printer wireless.....
And for the future i also want to connect a Dymo Labelprinter by 2.0 USB
in total 7 usb connections: only the time capsule have one port, so i can split to more ports by a usb-hub????
Well i have another question: i want to store a movie database on the external harddisktower that is connected to the time capsule.....
How can... let me say: my sister, and father who live on 2 different adresses get access to the movie database and watch them at their own home?????
can i secure it with a password given to my sister or father that is only works for 1 file???? so that i get multiple passwords
how does this works??? to share/upload/download to the internet only to one person????
i hope someone can help me????

hello,
ik have a question about the hardware i wanna buy
i have a IMAC that is 3 years old and running on leopard snow 10.5, i want to upgrade the software from this mac to 10.6 and put 4GB workmemory into it, i have now 1GB.
I have ordered a MAC MINI SERVER leopard snow 10.6(also ordered a dvd superdrive, wireless typing, and a wireless mouse for the mac mini)
i have ordered a Time Capsule 2TB
i want to connect to the Time capsule this:
G-technologie 8 TB G-SPEED Q RAID-oplossing (hdtower)
UPC of EAN nr.: 705487185744 in the mac store
i want to connect to the Time Capsule this for my TV to play movies from the harddisktower connected to my time capsule:
LG DP1W MEDIAPLAYER/CENTER without harddisk build into it, with WiFi connection butt, i'm gonna use te 2.0 USB connection that is faster and stabile.
-Connecting the Time Capsule to the Internet
i'm also gonna use this: gear4 PG467 UNITY REMOTE(control everything with iphone)
i'm also want to connect by 2.0 USB my canon all in one foto printer, WiFi is not working properly and i have many times problems with connection my printer wireless.....
And for the future i also want to connect a Dymo Labelprinter by 2.0 USB
in total 7 usb connections: only the time capsule have one port, so i can split to more ports by a usb-hub????
Well i have another question: i want to store a movie database on the external harddisktower that is connected to the time capsule.....
How can... let me say: my sister, and father who live on 2 different adresses get access to the movie database and watch them at their own home?????
can i secure it with a password given to my sister or father that is only works for 1 file???? so that i get multiple passwords
how does this works??? to share/upload/download to the internet only to one person????
i hope someone can help me????

Wireless Printer connection to Time Capsule

Similar Messages

Maybe you are looking for