Wireless printer connection

I lost my wireless printer connection. It keeps telling me the printer is "offline" What do I do?

WHAT TYPE OF PRINTER DO YOU HAVE????
Try doing the "wireless setup wizard"
-this usually found in the SETUP menu> wirless(network)> Wireless
If I have solved your issue, please feel free to provide kudos and make sure you mark this thread as solution provided!
Although I work for HP, my posts and replies are my own opinion and not those of HP.

Similar Messages

  • I have a new Epson wireless printer connected and the iPad recognizes it but it won't print. What is AirPrint and how do I connect it?

    I have a new Epson wireless printer connected and the iPad recognizes it but it still won't print.  What is AirPrint & how do I connect to it?

    Patti-
    Is your Epson printer on Apple's list of AirPrint capable printers?  See <http://support.apple.com/kb/ht4356>.
    If it is an AirPrint printer, then your WiFi router may not correctly handle Bonjour data required by AirPrint.  Contact the router's manufacturer to see if there is a change to its setup or a firmware update, that will make it work.
    One other possibility is that there could be a print job stuck in the iPad's print queue.  Double click the iPad's Home button and a row of recent Apps will appear along the bottom of the screen.  Scroll across and see if the Print Center is there.
    Fred

  • Can you print from an iPad to non wireless printer connected to timecapsule

    I just purchase an iPad. Can I print to non wireless printer connected to timecapsule? If yes, what app do I need for the iPad?

    You might want to take a look at Print Central or Printopia.
    PrintCentral for iPad on the iTunes App Store
    Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
    I can verify that Printopia works just fine for me on my iPad, but haven't tried Print Central.

  • HP Deskjet 460 wireless printer connection problem

    I just replaced my Airport Extreme (pre-n) with a Time Capsule. My HP Deskjet 460 WiFi printer no longer connects through wireless. However, configuring the Time Capsule wireless mode to "802.11g/b only" (i.e. no 802.11n) resolves the connection problem.
    Any suggestion on how to get the printer to connect with 802.11n enabled?
    Thanks in advance,
    - gael

    I also have an HP 460wbt and have similarly replaced my old airport base station with the TC. Without any wireless security the printer connected fine - but couldn't get connection using WPA or WEP. I've tried every combination I can - but have gone back to reconnecting the airport base station alongside the TC with bridging to the ADSL netgear modem I use. This seems a bit like overkill but I just can't get the WPA on the printer to work with the WPA personal options of the TC. Have you any ideas on this one?

  • I have an airport extreme with a HP Folio laptop and cannon pixma MX882 printer. when i am VPN'd in thru Cisco vpn and try to print the wireless print connection stops. i Un-VPN and it prints. then i have to go back into VPN to continue?how do i configure

    i have an Airport Extreme wireless router, HP Folio laptop (company supplied) and a Canon PIXMA MX882 wireless printer,copier, scanner and fax.
    when i am VPN's in thru CISCO VPN to my company Intranet site I cannot print wirelessly. i have to turn off VPN, priint and log back into the company intranet site.  is there a way to configure the router so that it is not blocking the signal?
    Tx

    The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
    Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
    Read up the issue.
    http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
    Cisco vpn client..
    https://supportforums.cisco.com/thread/239113
    I did not search much.. just grabbed the first article I could find that explains the issue.
    The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
    It is also a security risk using split tunnelling so often it will not be allowed.
    Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

  • IPad air to wireless printer connection?

    HHow to connect iPad to wireless printer?

    First off, the printer needs to be AirPrint capable, and then connected to the same wi-fi network as the iPad. If it is not AirPrint capable, then there may be an app that supports that brand of the printer in the App Store that might allow the device to work. About AirPrint - Apple Support

  • MacBook Pro Loses Wireless Printer Connection

    I have installed my new HP wireless printer twice now. Each time it prints successfully, but after a few hours it loses the connection to the printer. My PC always works fine with the printer. I did discover that if I turn the printer off and then back on, the Mac will find it again. But of course that is a pain. Can anyone tell me why the Mac is losing connection and if there is a way to fix it? Thanks.

    See this HP support article. Not all of the steps are applicable, and there may be a more relevant article for your model.

  • WRT110 wireless printer connection to Brother HL-2170W wireless printer

    New here and I have a question.
    I have Linksys WRT110 wireless router that works great. I have 7 notebooks working very well. Assignment were done with WEP connection and made sure that all the MAC addresses are registered and limits that router to recognize only computers with such MAC addresses... no problems at al here.
    Recently I bought Brother HL-2170W wireless printer... followed all the instructions in their manual, registered its MAC address in my router, provided WEP key to the printer (via their web browser utility)... and this is where the brain fart started...
    I can ping to my router just fine... I can ping the printer from the router just fine... however, I can not get the printer to work with any of my notebooks... It works fine if I connect it via USB or Ethernet connections, but nothing on the wireless side..
    I know the IP address that this printer was assigned via DHCP... When I programmed the printer with the correct IP address, it also points to port number 9100... and this is where it falls apart...
    Can someone please tell me what am I doing wrong or better yet, what step am I missing?
    Thank you in advance!

    You said "I know the IP address that this printer was assigned via DHCP... When I programmed the printer with the correct IP address, it also points to port number 9100...".
    When you programmed the printer, do you mean that you entered the DHCP assigned address directly into the printer, so the printer could use it as a fixed (static) LAN IP address?  If so, this might be the cause for your problem.  When you manually assign an IP address to a printer (or other network device), by entering that address directly into the printer, then you must use an IP address that is outside the DHCP server range.  See "Using Static LAN IP addresses" below, for more info on this topic.
    Additionally, to get your printer to work, you must install the network printer drivers on each computer that will use that printer.
    Additionally, for WEP, you must enter WEP "key 1"  (found in the router)  into your printer, not the WEP password or passphrase.
    *****   Using Static LAN IP addresses   *****
    Linksys has several rules for using fixed (static) LAN IP addresses.  You must follow these rules carefully.
    Rules for using fixed LAN IP addresses on Linksys routers:
    With Linksys routers, a fixed (static) LAN IP addresses must be assigned in the device that is using the address. So you need to enter the fixed address in the computer or printer, not in the router.
    When using a Linksys router, any fixed LAN IP address must be outside the DHCP server range (typically 192.168.1.100 thru 192.168.1.149), and it cannot end in 0, 1, or 255.
    Therefore any fixed LAN IP address would normally need to be in the range of
    192.168.1.2 thru 192.168.1.99 or
    192.168.1.150 thru 192.168.1.254
    assuming you are still using the default DHCP server range.
    Also, in the computer, when you set up a static LAN IP address, you would need to set the "Subnet mask" to 255.255.255.0 and the "Default Gateway" to 192.168.1.1 and "DNS server" to 192.168.1.1
    It is also important that no two devices on your network be set to the same static LAN IP address.

  • Wireless Printer connection to Time Capsule

    I have a Canon Pixma MP620 wireless printer that I'm trying to connect wirelessly to my Time Capsule. Is there a way to do this using the touch button method? Most access points have a button that can be pressed to receive a signal from another wireless device so they can sync but I haven't seen anything like that on my Time capsule

    So you plugedd the printer into the time capsule usb right?
    You need to re-add the printer in the system preferences one more time because the location has moved.

  • HT2421 set up wireless printer connection

    Requesting assistance with required steps to set up wireless printer connection

    This would be a starting point.. I cannot see the later articles..
    But the method is basically the same..
    I have only done it using the manual method.. ie plug the printer into a computer by USB.. and run through the setup wizard CD.. supplied with most printers.. to set them to infrastructure mode to the wireless of the TC.
    It works fine for all the printers i have tried.
    So read the instructions for the printer for Mac installation.

  • Wireless printing connection over large network

    I have  computer in a large apt. complex which comes with Wifi, and a single password for everyone in the building. I have a Wireless HP Printer and a Mac OSX.6 .  I want to be able to wirelessly connect the printer to my Mac, but the printer wont accept the password because so many other computers are also on the same network. (20 to be exact).  
    How does the setup work so this can be done?
    Thank you in advance

    Hi,
    In this environment, the safetest and quickest way for one computer: use USB cable. For more than one computer, using a separate home network will help.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Wireless Printing connection issues

    My printer is connected to my wireless router.  From a wireless computer I can ping the printer, I can browse to the printers web page, but I cannot add the printer ....it says cannot connect to the printer  Help

    jham111 wrote:
    1) XP
    2) When I follow the add printer wizard in XP, I type the name of the printer and I get a pop up box which says - can't connect to this printer, although I can "Ping" in and Browse to its IP address
    3) I have the manual for the printer.  Printer is successfully connected to the router with the proper WEP key.  When at look at the network components on the router home page, I see the printer and its associated IP address
    #1 What does the manual tell you to do to add this printer?
    #2 If you want to, point to where the manual is online.
    b) OR at least tell what the brand and model of it is...
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • How do i disconnect wireless printer connection when downloading driver updates?

    My printer is only printing blank pages. I have tried cleaning printheads, etc. and I am now trying to download driver updates. The instructions say to disconnect the printer from the computer, but I am connected through a wireless connection. I'm not sure how to properly disconnect that. 

    Driver updates are for your print driver in your computer.... You can simply power down your printer.
    Although I work for HP, I am speaking for myself and not for HP.
    Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )

  • I loose my wireless printer connection after sleeping?

    My wireless link is fine until my Mac goes to sleep. After waking I can't print via wireless connection unless I completely shut down and restart my Mac.

    Hello Warrior801,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Troubleshooting printer issues in OS X
    http://support.apple.com/kb/ts3147
    Reset the printing system, then add the printer again.
    If the issue still persists, reset the printing system again.  Download and install your printer's drivers. Then, add the printer again.
    Have a nice day,
    Mario

  • 10.6.5 and Wireless printer connection errors

    I have just updated both my iMac and Macbook pro to 10.6.5 and both now just show "connection error" when trying to print to my canon mp640 wifi printer.
    Another macbook I have that has non-updated OS is still printing fine to the same printer so the network and printer are obviously all ok.
    I have deleted printer and reinstalled new driver to no avail. Not sure what else to do from here??

    You marked this question as answered with no one making a reply with any help. If you found the solution on your own please share it.

Maybe you are looking for