Wireless printer wont connect to samsung tab

Hi,
Just downloaded the all in one app for a samsung galaxy tab3. The printer is a officejet 6500. Ive connected the printer to wifi but the tab wont connect to the printer. It showsnits found it, but says unavailable. Any ideas? Thanks

Hi,
What is the exact printer model?
If it is the HP Officejet 6500 (e709) printer, I afraid it only support printing via the HP ePrint app, the printer is not supported for the HP All-In-One Remote app:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02814760&cc=us&dlc=en&lc=en#N1311
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

  • WIRELESS RECEIVER WONT CONNECT

    MY WIRELESS RECEIVER WONT CONNECT TO MY LINK FROM THE BASEMENT.  IT WORKED WITH A SMALL TV AND NOW I HAVE REMODELED MY BASEMENT WITH A 60" BIG SCREEN AND THE REMOTE RECEIVER SAYS IT CAN NOT FIND THE NETWORK.   ANY COMMENTS ON THIS?  NEED  HELP!      

    How did the distance to the WAP change? THe WAP should be more than a meter from the RG. Move the WAP to a better location. Make sure it is powered & connected to the RG.

  • Wireless printer wont accept my password...help!

    I have am iMac OS 10.5.8. I have an Airport Extreme. My connection to the internet is via cable ..erethenet. My husband's computer is wireless and he connects via the Airport Extreme. It works fine for him and it works fine for our laptop.
    I recently bought a HP Photosmart eStation C510a which is a wireless printer. The printer is connected to my computer via usb cord. I spent 3 hrs with HP tech trying to resolve why the printer wouldn't accept the password for the airport wireless connection. He finally said it was probably a bad zeen (which is like a small detachable computer on the printer). I exchanged the printer. Now I am in the same situation.
    When I try to set up the printer, I get to part about entering the password and it won't accept it. I know its right. I went to keychain and checked it out for sure and it is correct.
    My Airport Extreme is at least several years old and I haven't done any updates. Should I and which ones. Does anyone have any suggestions?
    I have spent hours on this and am at my wits end. i will be the first to say that I am not very savvy the ends and outs of this sort of thing.

    Hi...I called HP again today. They gave me a list to go over with Apple. They are 1. Look for fireware updates. (I was so rattled when I first posted that I didn't realize that updates were on automatic) and all are updated.  2. OPen port 9100tcpudp 3. Change encryption to WPA 128 bit and 4. Allow printer through any firewall (firewall is not turned on.
    The AirPorts do have firmware updates over time and they may include updates to the AirPort's NAT firewall, but there are no specific updates just for the AirPort's firewall so item #1 would be a bit meaningless.
    However, when a wireless printer is connected to the AirPort, all communications do NOT go through the router's firewall as all of these communications are on the local network. Only if you were trying to access this printer from the Internet will these same communications be required to go through the firewall.
    For item #2, again this would only be of interest if you were trying to access the printer from the Internet. It would serve no purpose when accessing it from the local network.
    For item #3, I would be concerned that this printer does not support either WPA or WPA2 for wireless encryption. Their recommending that you switch to the basically outdated & unsecure WEP security would not be something I would agree with and would recommend against.
    Finally, for item #4, this may apply to a software firewall used on most computers. Just like the router, OS X & Windows operating systems provide a software version of a firewall on the computer itself. Most are enabled by default and it may be possible that the reason you are unable to print to this printer is that the communication between the computer and the printer is being blocked by this firewall. For OS X, you enable/disable this software firewall via System Preferences > Security
    So I called Apple tonight and they said my Airport Extreme is obsolete and I needed to buy a new one.
    Unless your AirPort is one of the 802.11b AirPort Base Stations (Graphite or Snow), it shouldn't be considered obsolete and there shouldn't be any reason why this printer is unable to connect to it.
    Just so I am sure which version you have, please look at the following Apple Support article and let me know which one you have.

  • Printer wont connect when wep password enabled

    Hi. I've had a HP Deskjet 5850 for many years. It worked perfectly with my D-Link wifi router, it connected wirelessly with no issues. I recently bought an airport extreme, I've reset everything on the printer and it works via ethernet, but it only works via wifi when airport is set for wireless security is set to none. If I assign a password of any sort it won't connect.
    In the printer's admin webpage I've set and reset it for a wep password and it wont connect. Does anyone know if this printer is compatible with airports wep password protection?
    Thanks!

    I created a WEP password, this is what the printer supports. However, even my MacBook had issues logging in with WEP, it would get bumped off the network and then could only log into the my airport extreme's wireless network after a restart... and then it would get bumped off again. So I switched the airport to WPA/WPA2 password and the macbook works fine now, and the connection is faster than it was with a WEP password. Does the AirPort have known issues with WEP?
    Thanks!

  • Setting up a wireless print function for a Samsung S5

    Can someone please walk me through setting up the wireless print on the Samsung S5? I have already set up my wifi to find the HP printer however, I can not seem to get anything to print whatsoever. Ready to throw this printer out the window.,

    Hi @
    Thedeb1
    Welcome to the HP Support Forums. I see that you would like to learn how to print from your Samsung S5 to your HP printer.
    To better assist you, would you please supply some additional information:
    What model and product number of HP printer do you have? How Do I Find My Model Number or Product Number?
    How is the printer connected (USB cable, ethernet, or wireless)? I’m just looking for confirmation that the printer is connected to your home wireless network still.
    Was the phone connected to the same wireless network that the printer is connected to?
    What version of operating system are you using on your phone? If you are unsure how to find this information, please follow the steps in wikiHow’s How to Figure out Your Mobile Operating System
    Are you getting any error messages? If yes, what do they say?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • Wireless printer losing connection hourly.

    I currently have a Cisco 4400 wireless controller running 7.0.116.  We use Cisco 1262, 1242 and 1210 Access Points. I am fairly new to all this. Our issue is that we have a wireless laser device that runs fine for about 1 hour and then loses connection. I can not ping the device and the web page via IP is no longer reachable. The printer regains connection after a power off/on. I have talked with the manufacturer and supplied logs to them and they say they do not see anything. Other devices in the office are running fine. I am wondering if there is a setting closing idle ports. The only clue I have it that it appears to be when the device is idle.

    We have gone 3 hours now without issue, there was one change made. I noticed that the time on the printer was manually set and lagged the network time by 6 minutes. I corrected that and we have been without issue since. Without a time server paying attention does the 4400 WLC or WPA2-PSK/AES have any sensitivity to that? Security time out caused by time issue on peripheral device?
    I have moved this discussion to the Cisco Enterprise Product group. #3369390

  • Envy 4500 wireless printer wifi connection too strong! Cancels all other users

    Inave wireless printer connected to e wifi, also 2 iPads and iPhone on wifi. The printer over powers the other items and makes using the pads and phone difficult how do I change the settings on the printer as per the network recommendation

    Hello jsimps0110,
    Welcome to the HP Forums! I understand you are unable to connect your Envy 4500 over a wireless connection. Looks like you have tried a couple of troubleshooting steps to try and fix this issue.
    Please follow this HP document on 'Unable to find printer' Over A Wireless Connection.
    Make sure you have turned off any Firewalls or Anti-Virus on your computer.
    If this document doesn't resolve your issue, then I would suggest connecting this printer with a USB cord. After you have performed this step, try Convert USB To A Wireless Connection.
    Please inform me your troubleshooting steps.
    I worked on behalf of HP.

  • TS2235 Hi, how can I print from my IPAD to my wireless HP 6520 printer.  I have a wireless network and my IPAD and wireless printer are connected to the same network.  But when I send a job, I get the "no air printer found" message.

    My windows firewall is disabled (protected by Comcast's Norton program) so that should not be a problem.  Should I down load Bonjour?

    Hello Bleedingblue65
    Check out the section highlighted below to troubleshoot your issues printing through AirPrint.
    AirPrint Basics
    http://support.apple.com/kb/ht4356
    If you are unable to print, or if you see the message "No AirPrint Printers Found"
    Verify that the printer:
    Has power and is turned on. If it has power, turn the printer off and then on again to see if that resolves the issue.
    Is connected to the same Wi-Fi network as the iOS device.
    Has the latest firmware version installed.
    Has paper with enough ink or toner installed.
    Is free of any errors displayed on the printer's control panel.
    If necessary, consult the printer documentation or contact the printer vendor for help with the above steps.
    Notes:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    Some Wi-Fi AirPrint printers can take several minutes to join a Wi-Fi network after being turned on. Ensure that the AirPrint printer is connected to the Wi-Fi network before attempting to print.
    Regards,
    -Norm G.

  • Wireless PC wont connect---wont acquire network address

    Your Network Magic Version installed: 5.5.5195
    The type of connection to the Internet : ADSL2
    The Brand of Modem and its Model Number the router is connected to.Linksys ADSL WAG120N
    The Method of connection your problem computer has to the Router:  Wireless.
    The Connection in use on the problem computer: TP-Link TL-WN350GD
    Operating system and version and Service Pack Level, XP Service pack 3
    Software Firewall in use: windows
    Also if any Anti-Virus Program or Spyware Program is actively protecting your computer. Iobit Security and Avast
    I have a problem, ever since I had to do a hard reset of my pc. It works on wireless and the signal is strong. But it cannot acquire the network address from the router no matter what I do.
    Can anyone help ?

    Firstly, you must know your router's wireless settings. click on these links to learn how:
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&articleid=3698
    http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&articleid=22046
    After getting your router's wireless settings, get your  Kindle and follow the steps on this link:
    http://askville.amazon.com/Kindle-connect-wireless-router-passwords-work-Help/AnswerViewer.do?reques...

  • Printer wont connect to computer properly

    Have recently purchased HP Envy 4507 is connected to the network but will not print all trhe time. will print one day and then decides not to the next. what can we do to prevent this?
    thanks  

    Hi @gemmawestlake 
    Do you have the printer connected directly to a wall outlet or is it in a surge protector or power bar? Even if you have been using a surge protector/power bar all this time and you feel it is not the cause, please connect it to a wall outlet just so we can eliminate the power source as the root cause.   Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector
    In this document you will see, ISSUE: Problems or issues may arise when an HP LaserJet series printer is connected to an uninterruptible power supply (UPS), a power strip, or a surge protector
    ^ This is not limited to Laserjet printers.
    Also, choose the appropriate link below to ensure the printer has the latest firmware update. 
    Choose this link if you have a 32bit operating system: HPCOM_HP_ENVY_4500_series_x86_000_003.exe
    Choose this link if you have a 64bit operating system: HPCOM_HP_ENVY_4500_series_x64_000_003.exe
    Is the Windows Version on My Computer 32-bit or 64-bit?
    This Firmware update improves and fixes the following issues:
    Enabled Scheduled Delivery/Printables
    Improves Connectivity reliability of your device
    Fixes miscellaneous minor defects
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP2710 Wireless printing wont work

    How in the world do you set the printer up for wireless printing?

    Well the first thing to do is read the instruction manual which came with the printer which explains the step by step procedure to get you up and running and loading the CD.
    After that you can try here.
    Wireless Printing Help
    http://www.hp.com/global/us/en/wireless/index.html?jumpid=ex_r11400_go_wirelessprinting
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

  • HPC8180 Printer wont connect to wireless network, after firmware upgrade to Wireless Router

    My HPC8180 has been connecting wirelessly since I bought it sometime ago.  I recently had to upgrade the firmware on my Netcom NB9W wireless router and since then my HP wont resolve to the wireless network.
    I run the Wireless Network wizzard on the printer, select the correct SSID and enter the WEP key as per instructions.
    It then will not connect.
    The summary I print out says it passes everything except:
    No Filtering = Fail
    Connected = Not Run
    Signal Strength = Very Low (which is strange because it's about 10ft from Wireless Router).
    Other networks detected matching your network name (SSID) = No
    Summary says:
    Network Name (SSID) altnet (correct)
    IP Address = Not applicable
    Configuration Source = Not applicable
    Communication Mode = Infrastructure
    Authentication Type = Open System
    Encryption = 64-bit WEP
    I have NOT turned on mac address filtering
    Any ideas??
    This question was solved.
    View Solution.

    Your router appears to be a DSL modem router.  Those can be tricky to connect to.  Also, WEP can be problematic and is no longer a good security measure.  WEP can be broken in about 10 minutes with freeware from the internet.
    Let's do three things:
    1. Change to WPA or WPA2 encryption.  You can make up your own password.  Make it 13 or more characters, numbers and letters, upper and lower case.
    2. Reset the Network Defaults in your printer (Setup > Network area).
    3. Attach to the router in this way:
    Sometimes DSL providers have more control over the router than the printer likes.
    - Unplug the telephone line from the router
    - Turn the power off on the router, wait 30 seconds, then turn the power back on.
    - Go through the normal process of connecting the printer to the device (Wireless Setup WIzard)
    - Now find the IP address of the printer (it should be on the self-test printout), type it into a browser.
    - On that screen you will find a Networking Tab, then on the left Wireless, then the IPv4 Tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). If you know what that is, set an IP outside that range but no higher than 254 (the last number in the address).
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Leave the gateway and DNS blank
    - Finally, plug in the phone line, reboot the router and test.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Imac find wireless but wont connect!

    As the subject states...i recently purchased an imac G5 from a friend, he wanted rid and i got it for dirt cheap; so figured id make most of a bargain!
    Anyway while setting up the computer and ridding it of all his rubbish etc i tried connecting to my household wireless network, the computer found the network but wouldn't connect to it and gave me the following message
    "There was an error joining the AirPort network "MadHouse""
    I know that the wireless network works fine as i can connect my Nokia N8, Blackberry Curve, Nokia N900, Ipod Touch, MacBook, and another 5 windows based laptops succesfully!!
    Any suggestions as to why it wont?

    try reinstalling the OS on the mac. if that's not possible try connecting the mac to your router by using an Ethernet cable. if you are able to get it to connect to the internet try to update it.
    if it still dosent work then, as the last resort, you will have to reinstall the IMAC G5's operating system. do not install the one that supports intel or it will not work on your imac g5.

  • I can not connect my samsung tab s tablet with ADE on my computer with a usb cable(.No connextion)

    I have a new Samsung Tablet TAB S. I want E-books that i store on my computer in Adobe Digital Edition transport
    to my samsung tablet to( Play Books App) if i connect a usb cable nothing hapens. If i connect my old tablet then there
    come a connection symbol on my computer in ADE. Who can help me ?

    Try going to system preferences>displays with evrything connected. You should see 2 windows "stacked" click detect display, then click the window in the back and it should show your monitor. Click mirror display.

  • Envy printer wont connect to internet

    I bought an HP printer 7640.  I am trying to get it set up.  The Network Configuration page includes the following information:1) Network Status - Ready;2) Active Connection Type - Wireless;3) Internet - Not Connected.   The printer "discovered" my 802.11 network, and I entered the password. The little blue light on the front of the printer is solid (always on, not flashing). I cannot get a Claim page printed out because after I 1) touch ePrint,2) then Accept, it goes into checking for printer updates, then tells me I'm not connected to the internet.  

    1. Turn off router for 30 seconds and on again
    2. Settings>General>Reset>Reset Network Settings

Maybe you are looking for