Wireless Printers not working since Windows 10 download

Since my download of Windows 10 on August 5, 2015, both my printers deskjet 3000 and photosmart 7520 are not connected to my desktop any longer, I had just printed on Monday, Tuesday and Wednesday. I uninstalled and reinstalled the printer software several times, rebooted router and computer to no avail. I am frustrated to no end. Are these printers even compatible with windows 10, does your software need to be updated? Helllllllpppp.

Try removing one printer completely from Windows 10.Make sure to remove the driver in Print Server Properties in Devices and Printers.

Similar Messages

Apple wireless mouse not working in Windows 7

I have Windows 7 loaded in Boot Camp and, for the most part, it works perfectly.
However, neither my Magic Mouse nor my Super Drive work ... at least, not immediately. My wireless Apple keyboard works perfectly and instantly, but my mouse only works after around a half hour after Windows opens and I haven't gotten the drive to work yet.
Any suggestions?
I'm flying a new iMac, 2.7 GHz Core i5, 16 GB 1600 MHz DDR3, running Mountain Lion.

I had the exact same problem as you did (less the drive) Kybd ok mouse didn't work, after installing Updates for Win 7 (about 100+ lol) then my BT kybd stopped working
In the Bootcamp Discussions there is a post about that. The post I didn't bookmark (i will from now on) but I followed this instruction posted (I copied & pasted to Notes)
"Control Panel > Device Manager > Network Adapters > Broadcom 802.11n Network Adapter (right click and choose "Properties". Under the "Advanced" tab, highlight the setting named "Bluetooth Collaboration", then change it to Enable. Then click OK."
After that wasn't working yet so, I went to start menu selected Devices & Printers...(if I recall), in the window selected "Magic Mouse icon (it was always showing but not working) right click & selected "Properties" for Magic Mouse, don't remember which tab it was but a driver was listed I checked it and clicked ok after a couple of minutes both the BT mouse and kybd worked and hasn't stopped since.
Sorry for lack of precise instruction, not exactly a techie, but can handle myself somewhat in front of a screen & kybd.
Hope this helps, it did for me, good luck
Message was edited by: jdemelo11

Apple airport express wireless printing not working on Windows

I have installed the Airport Utility v 5.5.3 and Bonjour Printer Wizard on my Windows XP (SP3) machine. I have successfully set up the router, but am unable to print wirelessly. In the utility, I see my printer and have selected the checkbox Share printers over WAN. I have the driver printers installed on a Windows laptop, but am unsuccessful printing from the laptop.
I read somewhere that I need to set the Internet > Connection Sharing to Off (Bridge Mode). I did that and then got the following error and then can't connect to the internet via the router at all:
An error occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again. Error -6753.
I have tried setting up Bridge Mode several times and ensured my virus protection and firewall were disabled, but always the same results, so I reset my router and am back to using the Internet > Connection Sharing option of Share a public IP address.
The whole reason I bought this router is because it is supposed to be easy for wireless printing, but this has been far from easy to set up. So frustrating. Any suggestions?

Thank you for your quick response. Yes, I have Bonjour Print Services installed. I thought I had to select Share printers over WAN for some reason. Just now I deselected this setting, updated the utility and wireless printing still does not work .

Wireless Keyboard not working in Windows applications running thru Bootcamp

I have recently upgraded to Snow Leopard and installed XP and Office on Bootcamp. My wireless aluminium keyboard would not work in Pages or Numbers but worked in Safari and Mail etc. It also didn't work in Excel and Word.
I have fixed the Pages and Numbers problem by downloading updates but I can't find anything to allow me to get the keyboard working in Windows application.
Does anyone know of an upgrade to sort this or will I have to buy a wired keyboard to overcome the problem?
Thanks
Nick

In order to get bluetooth items paired in Windows boot camp you first have to find the bluetooth symbol at the bottom of the windows start page. Next click on it and pick show bluetooth items. Then try to add a new bluetooth item. When this bluetooth item shows up double click the icon for the item. At this time it should show a window at the top it says general and other. Pick other and a small box needs to be checked. When you check the box Windows will find the exact drivers for the exact bluetooth device. After that it should be paired and work properly.

Microphone not working since Windows 7 clean install: Satellite P505-S8980

Ever since I reinstalled Windows 7 on my Satellite P505-S8980 laptop the microphone with the webcam has not worked. Has anyone else experienced this and resolved it? I am unable to chat with friends and family through Google hangouts, which is a little disappointing.
I've unsinstalled and reinstalled the drivers, checked all settings, tried to find updated drivers, etc., but with no luck.
Any help is appreciated.
Possibly helpful info:
Model P505-S8980
No modifications to hardware (original hard drive, etc.)
Running Windows 7 64 bit. Clean install, NOT from Toshiba restore disk or similar utility.

Satellite P505-S8980
The order of installing drivers is problematic. Best to restore the hard disk to the original out-of-the-box contents using Toshiba recovery media. All the drivers and utilities are properly preinstalled. Windows is preactivated.
If you failed to burn recovery discs, you can obtain them from Toshiba. Scroll down to Get Recovery Media here
For instructions, see the section Restoring from recovery media, which begins on p. 71 of the User's Guide.
Satellite P500 Series User’s Guide
-Jerry

5.1 Surround Sound speakers not working since 7.1 downloaded

I'm not sure what is causing it...But I cannot get my surround sound speakers working with ITunes since I down loaded 7.1. They all work with Windows media player. Is therre any setting I should be aware of?
Dell Dimension E510 Windows XP

I have the same problem and it is driving me crazy. I have an older logitech quadraphonic Z-560 speaker system that I love and have been using for years with never any problems, until I installed Itunes 7.
At first after the upgrade I was completely unable to play any file at all, which was later resolved by updating my SoundBlaster live Audigy card drivers. Now I can at least listen to music but only out of my front 2 speakers. I also noticed my QuickTime player does the same thing only playing out of the 2 front speakers. The issue only exists when trying to play audio through these 2 programs.
I have read all the posts on this issue that I could find yet have not been able to resolve it. I changed all the QuickTime, and creative settings appropriately for my hardware and no luck. I'm running the most current version of divers on windows XP with SP1.
Is it simply an incompatibility issue with my sound card?
PLEASE HELP with any advice!!!
Windows XP Pro

Wireless router not working after Windows update

I have a WRT54G V.5 wireless router. Windows Vista Home Premium did an auto update. Now wired connection works, wireless does not. Asks for key, but when entered nothing happens. Diagnosis states action was canceled. I have disabled and enabled, does not fix. Any help will be appreciated!
Solved!
Go to Solution.

Take not of the Wireless Settings(SSID and WEP/WPA Key) on your Router...
To know the Wireless Settings follow this link
Once you know the Wireless Settings attempt to connect to your Wireless Network...
XP :
Click on Start and goto the Control Panel and double click on Network Connections, right click on Wireless Network Connection and click on Properties.
Now on this window, click on the second tab Wireless Network and give a check mark on "Use windows to configure my wireless" and then remove all the network names present in the Preferred Networks Window. Then click on OK...
Right click on the Wireless Network Connection again and click on View Available Wireless Networks and try to re-connect to your network...
Now it will give you the opportunity to put the network/wep key, make sure you enter the correct network key and confirm it...
It will connect...
Vista :
Click Start >> Control Panel >> Network and Sharing Center >> Manage Wireless Networks, here remove all the networks present and close the Window...
Click on Connect to a Network and try to re-connect to your Network, it should ask for your Network Key/Password, enter the correct password/network key and click Connect...
It should connect...Once you are connected you should restart the computer, it should connect to Internet...

X230T camera not working since Windows update (Windows 8)

Hi experts!
I have a X230T with a camera and Windows 8 installed on it.
The camera driver Lenovo offers for Windows 8 always was unstable. I had a lot of trouble with it already. But after a reboot the camera always worked again. Now, after a Windows 8 update (by Microsoft), the camera is not working at all anymore.
I already did an uninstall/install of the camera + cold boot, but every time i tried there is no camera function. So it has given up it's work completely. I am pretty sure that the camera is without any fault physically, but the driver just doesn't work anymore under Windows 8.
Anyway, Lenovo should have fixed the bad driver for a long time already, but now this is obviously a really major issue.
Any ideas?

Did you try a real reboot, not just turning off and on (totally different things)
A reset/reboot is:
Go to Home Screen
Press and Hold Home Button
Keep holding and press and hold Lock Button
Keep holding Both
You will see Slide to Turn Off (Don't let go to slide, just keep holding)
The phone will turn off (in time, but screen will look like it has some white lines)
Keep Holding
When you see the Apple Logo, you can let go.
Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer.

Hotmail in Safari not working since Yosemite was downloaded

Good morning.
I installed Yosemite (version 10.10.2) yesterday on my imac and since then cannot open Hotmail in Safari (everything freezes or once I got the message 'Safari can't find server').
I was normally login in to hotmail using dub125.mail.live.com
I have already cleared my search history. And one of the Apple chat help persons told me to do a safe reboot, which did not change anything.
Any idea what I should do?
Many thanks!

Try a restart.
Do a backup, using either Time Machine or a cloning program, to ensure files/data can be recovered. Two backups are better than one.
Try setting up another admin user account to see if the same problem continues. If Back-to-My Mac is selected in System Preferences, the Guest account will not work. The intent is to see if it is specific to one account or a system wide problem. This account can be deleted later.
Isolating an issue by using another user account

Magic mouse and aluminum wireless keyboard not working in windows 7

Aluminum wireless keyboard (fully upgraded firmware as of 2/19/2010) not working, or magic mouse. Both from Apple Store, not amazon or ebay.
No error shown for magic mouse, only "connecting to device" for 15 minutes now.
With keyboard, at times it shows an error, but sometimes it lets me type a passkey. It doesn't recognize the passkey although it's saying it's paired, it doesn't work.
Help?

Getting Bluetooth set up initially in Bootcamp is a bit of a hit and miss affair in my experience, but persistence pays off, and connection is reliable. I gave up with the keyboard on my Mac Pro at one stage, tried again a few days later and it worked.
How did you do it?
Persistence and repetition, reading lots of threads and getting snippets from various sources, can't recall any silver bullets.
Have you searched this forum, there are a LOT of posts on the subject.
Links please? I can't find any.
If you type "bluetooth" in the search box while at the top level of the Bootcamp section you will get six pages of hits. Here are just a few, not necessarily the best or a complete list or in any particular order, but they contain relevant info.
I can't remember the detail now but one of the key steps for me was launching the bluetooth "service" mentioned in some of these links. Initially option wasn't appearing at all. Also mine (and others) seems to need a single click after boot to be activated. If you try and move it before a click it won't respond so you might think it wasn't working.
BTW I am assuming you have successfully installed the Boot Camp 3.1 drivers?
http://discussions.apple.com/thread.jspa?threadID=2221427&start=0&tstart=0
http://discussions.apple.com/message.jspa?messageID=10943844#10943844
http://discussions.apple.com/thread.jspa?messageID=10669525&#10669525
http://discussions.apple.com/thread.jspa?threadID=2057008&tstart=0
http://discussions.apple.com/thread.jspa?messageID=10948512&#10948512
http://discussions.apple.com/thread.jspa?messageID=10935130&#10935130
I am afraid at this point I stopped trawling through looking for the most relevant ones so the above is incomplete.

DesignJet T520 plotter - not working since windows update

Our clients new plotter worked flawlessly until a couple of weeks back when the machines were suddenly unable to print one morning.
It turns out that an optional update for the T520 24" on the affected machines has been applied which has basically killed the drivers they have a yellow symbol now.
There is no uninstall option for this update.
I downloaded the original drivers again from HP and reinstalled plotter forcing it to use the downloaded driver but still no go
Presumably a core underlying windows kernel file was changed by the update ?
How can I fix this.

Hi NovaTech,
DesignJet issues are discussed on another board: http://h30499.www3.hp.com/t5/Printers-Designjet-Large-Format/bd-p/bsc-414#.VCGzRfkujsI
You'll have better luck if you repost there.
Regards,
AlliBee
I am an HP employee, but opinions expressed here are my own.
Click the thumbs up + button if I have helped you. Mark Accepted Solution if your problem is solved. If both apply......do both.

Setup Airport Extreme for the home wireless - MacBook Air, Pro, and iPad connect just fine. Wireless will not work to Windows 7 and Vista machines - network seen, tries to connect, but fails after entering WPA key.

Can't get Windows Vista or Windows 7 laptops to access internet via Airport Extreme. Works fine with security on MacBook Air, MacBook Pro, and iPad. Brand new Airport, bought today. Windows machines worked fine with existing, relatively modern Cisco home router. The Windows machines see the wireless network, prompt for password, and then cannot connect. Have tried all sorts of things with Windows machines, deleted existing networks, etc. even tried guest login with no security on the Airport - no luck. Windows XP machine directly (wire) connected works fine. Magic Jack works OK. Light is green on the front.

Thank you very much for your help @Sunshyn2005!!!!! I think we're good to go now!

Printers not Working since last week

I have two wireless Epson Printers, as of last week when I try to print to either printer does not print and message is looking for printer; however it is able to print a test page. Any suggestions would be greatly appreciated. Thanks

Step 1
Open the Sharing pane in System Preferences. If the Computer Name is not set, enter a name. You may first have to click the lock icon in the lower left corner and authenticate to unlock the settings.
Credit for this solution to ASC user Yuengdog1983.
Step 2
If there's no improvement after Step 1, restore the following folder from the last backup you made before the EPSON update:
/Library/Printers/EPSON
You may have to reset the printing system for the change to become effective.

A355 internal mic not working since Windows 7 upgrade

I've spent like 30 hours trying to figure this out.I has become somewhat of a crusade of sorts.Seems as if many people have had this problem , but can't find anyone who has solved it.I've tried many different realtek drivers,enabled ,disabled, vista drivers,windows 7 drivers I am at a loss for ideas.I've searched all over the web.Please help, I need to figure this out.Thanks in advance

Is this the mic by the web cam?
Did you installed the Toshiba Windows 7 Sound driver? I get the drivers from the Toshiba Canada web site. They have the latest drivers.
Check it out.

Wirless not working since 3 years

wiless doesn t work sine I bought laptop
plz help me
serial [Moderator edited Serial Number]
product a7m80ea#a2n
model dv6-6c40ex
thanx

Hi @ali122 ,
Welcome to the HP Forums!
It is a superb place to find answers and tips!
For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
I grasp that the wireless has not worked since the day you purchased the notebook.
When you are trying to connect wirelessly have you disconnected the Ethernet cable?
Is the wireless adapter seen in the Device Manager?
Here is a link to Troubleshooting your wireless network and Internet connection (Windows 7)
You could also test the card for a hardware issue.
Testing for Hardware Failures (Windows 7, Vista)
If you use the UEFI diagnostics under the component tests you will find the wireless listed.
Good Luck!
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Wireless Printers not working since Windows 10 download

Similar Messages

Maybe you are looking for