Wireless printing help needed

How do I print wireless to my hp office pro 8500 from my I pad mini, help needed please

use the hp eprint app. For more details, see: http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=c01619067#N52

Similar Messages

Wireless Printer Help needed with a brand new AE router.

Hello there, I just purchased an Airport Extreme router and I'm having problems getting my HP Photosmart C8180 All-in-one printer to receive print jobs even though it and my computers are all connected and visible to the new AE wireless network. This is happening to my mac and windows computers as well. Any suggestions?

Does this help:
http://support.apple.com/kb/HT3500
How is the printer hooked to the network?

Wireless printer help

I have an acer laptop.I am using a belkin router.I also have an hp wireless printer.I had everything working right until I changed my internet & phone from cable to satillite to save money.I contacted belkin and they told me taht my problem wwas that I needed a more powerful router.I puchased one from them and I still cannot get my printer to connect.Please help. thank you

Hello @craftyone61,
I understand that after changing your internet and phone to a satellite connection your HP Deskjet 3520 e-All-in-One Printer stopped working over the network with your Windows computer. I would like to assist you today with resolving this wireless connectivity issue. Now, just so you are aware, any time you make a change on your network (network name, password, change of router, or changing service type: satellite) would require you to rerun the wireless setup for your printer to 'allow' your printer access to the network with the new changes present. If you did not run the wireless setup for your HP Deskjet after your service changed from cable to satellite, than you may not require that new router as the reason your printer was failing to work was because it did not have permission to access the new satellite network. To reconfigure the wireless on your printer and resolve this wireless connectivity issue please follow the steps below.
You will need a USB Cable for the wireless configuration. Do not plug in the USB Cable at this time. Should you have a USB Cable currently connected to your computer from your HP Deskjet, please disconnect that cable before proceeding.
Step 1: Remove Driver:
To ensure that there are not duplicates of your printer installed once we've completed the wireless setup of your Deskjet, I am going to have you remove your driver. This way we have a nice clean slate to work with.
Click on your Start menu
Select All Programs
Select the HP folder
Select the HP Deskjet
Select Uninstall
Please follow the onscreen prompts to complete the uninstall. Once the uninstall is complete please proceed to the next step.
Step 2: Install and Configure Wireless:
Please click here to download the latest drivers for your printer
Once the download is complete please follow the onscreen prompts to install your printer
When prompted choose the 'Wireless' connection method
You will now see a Wireless Setup Using a USB Connect screen. This screen will prompt you to connect your USB Cable. When prompted, please connect the USB Cable.
The wireless configuration will now take place
Once the wireless connection has been established you will be prompted to disconnect the USB Cable
You should now be able to use your printer wirelessly again.
- Source
Please respond to this post with the result of your wireless reconfiguration. Good luck!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

Wireless Printing Help/Advice

I would like to be able to print to 2 different printers wirelessly. I currently have an HP all in one that I was able to set up through my Netgear WGPS606 print server, and it works well. I also need to purchase a laser to use and would like to hook up also. The server allows for 2 printers, so I don't think it should be a problem to hook up another. My problem is, I am looking at the HP 1022 and Netgears says that printer is incompatable with all wireless print servers. The reviews on the Apple site have people stating that they are using this printer with an Airport Express. Is the Airport Express that much different thant my Netgear server? I only went with the Netgear so I can use 2 printers. Does anyone know of another wireless print server that allows for 2 printers to be hooked up? Sorry for so many questions, but it seems wireless printing is still in its infancy? Or maybe no one has figured out an esy way to do it!

Greg as promised,
The ESP I (Had) is Print Pro I did not have Ghostscript but did have hpijs foomatic. I still have the many Print Pro drivers but have just obtained the EPS companion CD in the hope of a painless installation of Ghostscript. Sadly that seems to be so only for OS other than OSX. I have the ghostscript files from an ESP download but compiling and installing from the command line is beyond me and so far I have failed to find compiled binaries. I have used Fink for Ethereal and something else but don't want to try such for something as important as the printing. Do you know of a location for up to date compiled Ghostscript?
I am finding it very difficult to get a not abnormal print server to run this HP from this Mac. Is it really too much to hope that this vaunted OS have a built in printer interface that copes with plain vanilla print devices? I know there are many more printers than OS and that tends to put the blame on the printers. However that multiplicity of printers cant reflect a similar variation in fundamental characteristics so perhaps the platforms should get a share of blame. Don't you bother answering that Greg. There are other more partisan conflicts in this forum I might wade into.

PDF Printing Help Needed

I have a Windows pc only for 1 thing - printing pdfs. My problem is that Windows printer drivers allow me to have auto select paper size/tray depending on if the pdf page is standard or legal. I have not yet found anyway to do this through the mac.
I have a Brother HD-5370 laser printer and need some assistance with the paper auto select. If any one has any suggestions or an actual fix, I am all eras.
Thank You,
Dan

Dan231,
Welcome to Apple Discussions.
We are willing to help however we need you to complete your Public Profile (look to your right) so we can tell what computer you have, the version of OS X, how much RAM etc. Also letting us know where you are located could help in future posts.
Most printing issues are handled in the Printing forums. Each version of OS X has it's own printing forum. For example if you use Snow Leopard (10.6) then that forum is located at:
http://discussions.apple.com/forum.jspa?forumID=1344
However let me try and take a stab at your problem. I am guessing you are using Preview to print the PDFs so let's start there. When you print (Command-P) the printing box will appear, look under the Orientation and right below that it will probably default to Preview. Click that radio and choose paper handling to see if your printer offers more choices. You can also run Software Update to see if you have the most up-to-date drivers and retry.
Hope this starts to give you some direction.
Roger

Printing Help Needed

How do you print witn Adobe Reader legal and letter sized paper which are in one pdf file, the documented solution does not work on HP printers using Windows XP....

you would have to network both your mac and your desktop together... share the printer on the computer that it is connected to... then on your mac you can set up a wireless printer by going into system preferences, printer and follow the steps.... in order for you to have wireless printing you have to make sure that the computer that the printer is connected to is always turned on.. printing will not work if the computer is turned off.

Wireless printer help please

I just had my OS reinstalled and now my mac can't find my wireless printer. The only things that seem to be listed under Apps are my printer related manuals, etc.

First you should look at the printer manufacturer website and see if the printer is supported for Mavericks.
If it is, try this, it will probably work:
key step: uninstall all printer manufacturer apps and "utilities"
go to System Preferences > Printers & Scanners > Print
control-click on your printer in the column on the left
select "Reset Printing System..." and "reset" in the dialog that follows
do a factory reset on your printer. You'll have to consult the printer manual for how.
power down everything: modem, router, computer, and printer
power up each item in turn in the same order: modem, router, computer, and printer. Let each power up completely before moving on to the next
enter your wifi password in your printer so it can connect to the network
go back to printers & scanners and it should see your printer and download a driver for it from Apple
resist the temptation to install any printer manufacturer apps in the future.

Just plugged in my wireless printer and need assistance please - can anyone help me to start printin

just plugged in my hp deskjet 3070A e-ALL-IN-ONE SERIES and want to do a test print - I'm not sure what I am doing and don't want to make any stupid mistakes - the software was loaded on to my new hp laptop when I bought it from PC world/currys - can anyone "talk me through" the basics that I need please?
sorry to be such a wuss but am okay once I know what to do - if I get in a jam when first trying, I get a bit worried about what to do so would much rather get it right first time and then I can go on from there
thanks in anticipation ...

Since you installed it, just follow what the manual and instructions say and print away....
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Ipad rocognises wireless printer but needs a password

Hi, please assist.
Firstly I dont have a desktop computer.
I am attempting to hook up my ipad to my new hp 2540 for direct wifi printing and having great difficulty.
I am seeing on my wifi list on my ipad that the device is recognised but it is requesting a password?
I havent been given a password...please advise what I can do...please no demo videos for other model printers.

Hi @Dogwallop,
Welcome to the HP Support Forums. I understand that you would like to learn how to find the password to the Wireless Direct network your Deskjet 2540 printer is broadcasting.
You will need to print the Wireless Direct Information Page to get the password. The steps can be found on page 53 of your User Guide.
Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Setting up HP L-7590 via usb to wireless router, help needed..!

Hi,
I have been using my L7590 via lan to a wireless router for a few years... that was perfrect...
Recently I had to change router because of change of ISP. The new router is a Huawei B683... the problem I have is that this router does not allow LAN connections from the router ...!! It does has a USB port that is for the printer...
I am unsure as to how I setup the printer connected via usb to the router....
Do I use the network installation setup...? Or do I use the USB setup...??
Any help is greatly appreciated...
Thanks

Hi,
Connecting the printer to a router's USB port (aka. print server) will only allow you basic print functionality , it won't provide you any scan functionality, faxing from the computer, ink levels or any operation of the HP Solution Center program.
To get full functionality you must work with the provided functionality which means USB connection directly to a single PC or Ethernet connection to a router.. therefore using an Ethernet router will be the preferred solution for you.
In order to setup the printer as you described you should connect the printer to the USB port and go to Control Panel > System. click add a printer and add it through the network.. there might be a need to enter your wireless homepage to enable the printer through the USB, there might be additional setup information in there.. that veries between different print servers and you may contact Huawei support or your ISP for any assistant within the print server configuration.
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

HP 3512 wireless reconfiguration help needed

I recently had to buy a new mifi hotspot, now my printer refuses to print. I'm running windows 8 and cannot figure out how to reconfigure the wireless settings on the printer. Any help would be much appreciated. I'm ready to throw it out and buy a new one!!!!!!

Sorry the printer is not supported on a mifi hotspot.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

Wireless Printing Help

I just bought a Samsung CLP-300 Color Laser Printer and I can't seem to get it to print wirelessly when it is connected to my airport via usb. I just replaced this printer with my HP Inkjet that had no problems printing wirelessly through my airport via usb.
Please someone help before my wife gets home and punches me for replacing her printer.
Thanks in advanced!

Hello jeremydpenn. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations. In addition, the AirPort's USB port does not support the "advanced" printer functions, like scanning, copying or faxing, of multi-function printers.
To see if your printer is compatible, take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
o 802.11n AirPort Extreme Base Station (AEBSn)
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also you can try this Apple Tech Support articles to see if it will help: Printer troubleshooting for AirPort Extreme and AirPort Express

Printer Help Needed

I have a MBPro 17 running osx10.4.8. I have a home network which I utilize multiple printers. I am having trouble with the driver for my kyocera mita FS-9100DN. I have gone to the mfr's website and downloaded the osx104.sit file which is explained to be the driver for the printer for OSX. When I try to open the file to execute the installer for the driver, I get a message stating that there is no program designated to open the file. I am new to mac's, and I really need some help here. Anyone that can give me a hand would be greatly appreciated. Thanks.

Hey, Greg, I had a similar situation downloading an update for Quicken 2007 for Mac; the update was a ".sit" file and hence requires Stuffit Expander. Is Stuffit Expander a good program for the new Intel Macs? I have a MacBook Pro 17" with the 2.16 Ghz Intel chip. For some reason I feel a little hesitant to download and install the Stuffit app. What's the current experience with this app?
Thanks & God Bless!
Rick

Printer help needed from the Apple community

Hello Apple Community,
Can you help me to print from a new Mac to an old Canon printer?
I'm here in Vietnam (first time in Asia) as a teacher. I have the latest model MBP (running Mac OS X 10.8.4). There's an old Canon that I'm trying to print to. I've Google'd the model number but nothing comes up for Mac. There are sites in the Google search that say they have the software. I'm worried they might be malware sites.
On the back of the printer it says L11121E. But when I connect it (via USB) and open Print & Scan it detects it as a Canon LBP2900.
I looked here: http://support.apple.com/kb/HT4670 and here: http://support.apple.com/kb/HT4670.
But neither of those links list the Canon L11121E or LBP2900.
When I Google'd "L11121E mac driver" this link came up:
http://support.apple.com/kb/DL899
Do you think that would work?
I checked for updates from the App Store (and System Preferences Print & Scan) with the USB cable of the printer plugged in. Nothing came back.
I'm a teacher trying to print material for my students. Any help at all would be appreciated.
Confused,
.Sean

Thank you, Linc!
Following the instructions from AlexeyU (thread: https://discussions.apple.com/message/15765876#15765876) worked!
AlexeyU's instructions:
"Try this:
1) Download & Install official drivers for Lion v3.36 – http://support-au.canon.com.au/contents/AU/EN/0100359005.html
2) Download & Install this package –http://www.uzhva.com/temp/Canon_LBP3000_to_LBP2900_patcher.zip
3) Reboot
You probably will need to manually match your printer with LBP 2900 driver from drivers list."

Printing help needed quickly

I am trying to print out football tickets I purchased thru stubhub. In my e-mail I recieved a link to download the tickets. I can see the page needed to print showing my ticket.When I hit the print icon a box opens and says This document could not be printed.I hit ok. Then a second box opens and says There were no pages selected to print. I went back to try again and after hitting the printer icon I see under pages 1 was selected but I was unable to access it or change it. I need to download these tickets soon...Thank you for help resolving this issue...

What printer? What driver? What OS and Reader version?
Can you try to print as image?
The option is present under Advanced options in the print dialog.
Sometimes if you remove the printer driver and re-install it, you can
then print the pdf.

Wireless printing help needed

Similar Messages

Maybe you are looking for