Wireless printing is not working

Hello,
I have a printer all in one : HP ENVY 4502 (HP ENVY 4500 Series)
The printer works wireless.
At the smartphones : it works
At the laptop (Medion) of my daughter it works : printing and scanning. (Windows 8.1 64 bit)
But when I want to install it on my laptop of dell with windows 8.1 64 bit it does not work.
During installation he does not find the printer.
What can be wrong?

Addiotional info : when I go to the IP adress of my printer it works on my dell. I can scan but he does not print.
So my laptop finds my printer and still I can not print.

Similar Messages

  • Wireless printer does not work after update

    I have VM fusion running on my MAC with a wireless printer enabled on my MAC. Prior to the security update, the printer worked seamlessly. Since the update, I can no longer "see" the printer in Windows XP. Any suggestions?

    More information.
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

  • My wireless printer is not working since i allowed hp updates from the internet with no solution

    I accepted upgrades from the internet for my printer HP Photosmart 5510 series; now I cannot print anything not even a test page.  What are my options and how can this issue be solved?

    Hi,
    My suggestion: rollback or backout the updates using Windows Restore. To help us answer question quicker, please read this:
       http://h30434.www3.hp.com/t5/First-Time-Here-Learn-How-to/Welcome-Get-started-here/td-p/699035
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Wireless printing does not work when VPN into network (officejet 4500)

    Officejet 4500 G510n
    I print with wireless, which works fine,
    Until I VPN into the network (which is most of the day) at which point printer shows offline.
    To print what is in the que, I have to log out of the network, wait for it to print, then log back in.
    Is there a fix for this?

    Hi,
    Thank you for your reply.
    For that you will have to contact your network administrator, ask them to grant you access to use the resources on the local network when you are connected to  the VPN. So that you can use the printer, when you are connected to the VPN.
    As I Said earlier, when you are connected to the VPN you completely on a different network (Office Network) and you are disconnected from your local network. Your local network will just be acting as a bridge.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"
    (Although I am employed by HP, I am speaking for myself and not for HP)

  • Wireless Printer function not working - was when purchased a year ago

    Serial # if needed: [ Moderator edited Serial Number]
    Hi,
    As stated above, I can't print wirelessly as was able to previously.  I am completely at a loss and have tried numerous times to solve this knowing it was working at some time.  I know, definition of insanity with numerous attempts.  Anyway, seems to not be recognizing IP address.  Below error message:
    Unable to Find Printer;
    Paraphrasing
    "The ip address is either incorrect or it is from a different wireless network that has the same name as your network." 
    I have a Netgear router model N300 model # wnr3500L.
    It recognizes an HP printer on the home network.
    I looked at another forum with a Cisco/Linksys router with Windows and the advice was to change ip range on router to
    192.168.1.100 to 192.168.1.150 and change printer to static 192.168.1.10.  I changed printer to latter address just for fun and got error message again.  I am going to go back to original setting which is 10.0.0.9 dynamically given.
    Please help.  Thanks.
    Steve

    BTW, how can I personalize my login handle?  It seems to have named me manifold (student) by default.

  • Wireless printer suddenly not working - EPSON WF-2540

    I have a Macbook Pro and suddenly it has stopped printing to my Epson WF-2540 printer, which I've had for a couple years. It printed something last week and now it won't print anything. I've restarted the printer, reset the settings and reconnected to our wifi network on my printer, turned the router on and back off, deleted the printer from my Mac and deleted the drivers and reinstalled them. Now when I go to add my printer back onto my Mac, it doesn't show up as an option. The fax does, but the printer doesn't. So, I added it via its IP address, but it said it couldn't connect to the printer due to an error. I went ahead and configured the printer, but if I go to print, it keeps pausing. The light in the printer window in System Preferences is yellow all the time now. I can print from my iPad or iPhone just fine. Anybody have any suggestions as to what's wrong?

    I'm unsure from your post, but have you tried resetting the printing system?
    OS X Mavericks: Reset the printing system  also Yosemite
    If you have the printers IP address open Terminal (Applications/Utilities) and at the prompt type: ping {printerIP}. You will get a reply or failure.
    Network Printer Troubleshooting

  • How do I correct the "Wireless Radio is not working" problem on my Photosmart C410 Printer?

    HP Photosmart Prem C410a All-in-One
    Windows 7 64-bit
    Wireless Radio is not working
    Trying to change from USB to wireless setup
    purchased at Staples on 8/19/2010 - means warrenty has expired

    With the printer ON, unplug power from the back of the printer for 30 seconds.  Does that reset the radio?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • My HP wireless printer does not shpw up on my pc and iphone. Is you website nor working?

    Wireless Printer does not show up on the printing screen

    You might want to take a look at Printopia to see if it will do what you want. There is a free trial, so you will know for sure before you buy.
    The upside with Printopia is that printing from the iPhone will work just as if you had an AirPrint printer.
    The downside with Printopia is that you must have a Mac running on the network to be able to print.
    Printopia - AirPrint to Any Printer - Print from iPad - Print from iPhone ...
    I have no interest in Printopia other than that as a customer.

  • I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    I'm having problems printing from my 15" macbook pro to my HP wireless printer. It works sometimes but not reliably, it can spend hours "seating for printer". I can print from my i pad with no problems

    Hi,
    Apple's AirPrint only support specific models while using wired or wireless network connection.
    Plugging a printer into a USB port of Apple base is not supported for AirPrint:
    AirPrint printers connected to the USB port of the Apple AirPort Base Station or Time Capsules are not supported with AirPrint.
    As well you must use AirPrint enabled printers for a such, none of your printers are AirPrint enabled:
    http://support.apple.com/kb/ht4356
    There are 3rd party solutions which allow sharing a printer connected to your Mac as AirPrint, Printopia as example provide a such:
    http://www.ecamm.com/mac/printopia/

  • Printer will not work after update to Mavericks

    I have a macbook pro and an HP7280 printer connected wirelessly.  After upgrading to Mavericks the printer will not work.  The first time I used it the system upgraded automatically (I forget what it said but it just went ahead and did some upgrading)  When I clicked on something to print it did recognized the printer but just scrolled and scrolled and never printed.  So I deleted the printer and reset the system and then added the printer back on - same thing.   Any ideas??

    It means there is no issue with the driver you are using and with it working correctly on Mavericks. So you have a network issue with the printer queue you are using. Normally a reset of the printing system and re-adding the printer would be enough to get things working again. But since you have done this and your issue is not resolved, there must be some other gremlins in the system.
    With the HP connected to the network, if you know its IP address you can enter this as a URL into a web browser. This should result in you connecting to the internal web page of the HP. Does this work?

  • Help with hp 7520 wireless printer does not recognize black photo ink

    brand new 7520 hp photosmart wireless printer . i set it up put in all set up ink cartridges correctly. machine says missing cartridge shows photo of black photo ink . this machine is not recognizing the ink. i heard it snap in and i see it but this wireless photosmart 7520 wireless printer is not smart enough to recognize its own set up photo black ink ive tried everything i even went to staples and purchased a new  photo black ink. put it in and again it states that it is missing. any suggestions before i throw it in the trash where a stupid machine belongs many thanks

    Hello @notrevo157,
    Welcome to the HP Support Forums! I see you are setting up your HP Photosmart 7520 and it is not recognizing the Black setup cartridge. You have tried replacing the cartridge with no success.
    I would like you to start troubleshooting here: Ink Cartridge Problem: An 'Ink Cartridge Problem,' 'Incompatible Ink Cartridge,' or 'Ink Cartridge F..., I understand you may not be getting this exact error message however these are the steps I would like you to do to try and resolve the issue you are experiencing.
    If after the troubleshooting you are still experiencing the issue, I would call our technical support at 800-474-6836 as you may need the setup cartridge replaced. If you live outside the US/Canada Region, please click the link below to get the support number for your region. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Wireless Printing Doesn't Work

    In February I had to purchase a Mac desktop computer due to the failure of my semi-old HP Windows computer. When we bought the Mac we also purchased a new printer since it would be cheap since we bought it with the computer. The printer is a HP Photosmart Plus B210a series model and so it has wireless printing. However, the only way to get the 'wireless printing' to work is if you first install the software. Seems good, right? No. After proceeding to turn off the printer like every normal person since you don' want to leave it on, everything goes wrong. If you turn the printer on at some time, the wireless printing won't work at all! Even if I disconnect and reconnect the WiFi to it and print the diagnostics page, where everything turns out normal EVERYTIME. This is quite thoroughly making me irate because to get the wireless printing to work again, you have to uninstall the software and reinstall it. I got so fed up with it the other night that I connected a USB cord to it, which totally defeats the purpose of the entire printer since it's suppose to be hi-tech for it's wireless printing and e-services ( which require WiFi). Can anyone please help me figure out how to have the printer continuously working so it doesn't just stop when I turn it off?
    Solved!
    Go to Solution.

    By the fact that you desire the printer to be turned off, I would think that you probably shut off your computer and other devices as well? You do this every time you're done?
    There are two schools of thought on this.
    Turning it off:
    - Reduces electrical usage versus leaving it on in low power or 'sleep mode'. In today's modern terms, you'll probably save about $40 a year.
    - If you have a fan or cooling issue, such as you're in a tight space with no airflow, this can reduce heat and cause hardware to last longer.
    - No one can access your machine or other devices when they are turned off. This prevents virus's from executing or running so long as the machine *remains* off.
    Leaving it on:
    - Allows programs to update automatically when you are not there, dramatically reducing the chances of getting a virus and also giving you the latest version of your software.
    - Virus scans can be run *automatically* to fully scan your computer while your not there, making it unnessasary to do this when you're actually using the computer, and therefore speeding up the computer greatly.
    - Instant-access to what you're doing, instead of having to wait for the machine and devices to turn on.
    - If you're sharing files, folders, or printers, this makes them available on the network.
    Computers and their accessory devices are designed to run 24/7, 365 days a year. They are also designed to be shut off every night, if that is your preference. However, I think the benefits of leaving things on greatly outweigh the benefits of turning things off. Again, however, it's a personal decision.
    If you decide to turn your devices off after use, please spend the time at each session to download and make updates to your computer, especially WIndows Updates and anti-virus databases. Especially with the anti-virus updates, try not to access the internet until you have the latest anti-virus update installed.
    I am a Bestbuy employee who volunteers on these boards on my own time. I am not paid for posting here, and you should understand that my opinions are exactly that - opinions. I do not represent Bestbuy in any way.
    : Open Mailbox

  • HT4356 Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

    Up photos mart c7100 series wireless printer does not show up as a printer. Anyone found a fix for for use with ipad3?

    It sounds like the features are working through the USB connection rather than the wireless connection since it is still not seeing the networks.
    Everything points to a hardware failure since the steps provided through the private message did not work and the wireless test showed it had failed.  Sorry.
    You do have some options at this point.
    If it is under warranty, either standard or extended, you can contact HP support at 1-800-474-6836 to have it serviced under warranty.
    If it is out of warranty, you can still contact HP support to find out all the options and the cost of each option.  However, it is my opinion that this money would be better spend being applied towards a new printer. 
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Wireless scanning does not work with Yosemite

    When I uppgraded from Mavericks to Yosemite the wireless scanning doesn't work anymore.Tried to find some new driver at the support page, but there are only drivers for Maveriks and erlier versions of OS X.

    Hi , Welcome to the HP Forums! I noticed that wireless scanning is not working after upgrading to Mac OS X 10.10, with your HP Deskjet 3520 printer. I am happy to help!  Some questions for you:  Is your HP Deskjet printer an all-in-one? Meaning, can it print, scan and copy?What is your printer's Product/Model Number? To find your printer's Product/Model Number follow instructions in this link. Finding Your HP Product Model Number. As their are multiple types HP Deskjet 3520 printers.Are you able to make a copy with the printer from the scanner glass?  In the meantime, please see this how to scan guide, Scanning in OS X v10.10 Yosemite without HP Software, for some alternative scanning methods, and let me know if any of these options work!  Thank you for posting, and hope to hear from you soon!  “Please click the Thumbs up icon below to thank me for responding.”

  • Airport Express USB printing suddenly not working

    Hi, we have an airport express which doesn't seem to be working properly. We've had it at least 2 years now. All has been working fine but suddenly USB printing is not working on it. When I load up AirPort utility and go to the printers tab, it says "USB printers: None". It didn't use to say that! I've checked the printer - it works fine when printing direct from computer to printer over USB (hence both the printer and the USB lead are fine). We use the airport express for iTunes and it works fine. The airport is running version 6.3. We used to print (when it worked) from both Windows computers running XP and from macs running Snow Leopard...
    Any thoughts?
    Edward

    Erm... help!
    In a bid to try to sort out the problem myself, I decided to restore the Airport Express (b/g) to the factory default and see if that helped... I did this through the airport utility. The airport reset fine and I then went through the set-up wizard. However, when it then tried to restart as part of the setup process, it said that there was an error and that it could not restart. It said to restart the airport utility and try again. This I did but it cannot see the airport. If I rescan, it says the same thing (unable to find any apple wireless devices). What should I do?
    All thoughts and suggestions gratefully received!
    Edward

Maybe you are looking for