Wireless printing not working properly on HP officejet 4500

Hi,
I have recently bought the OfficeJet 4500 wireless printer.
Now I have a problem when printing a document from wireless connection. When I send a document to be printed from wireless network, it does not transfer completely, and the document can’t be printed completely.  This accurse when sending small files (128 KB) and a bit larger (1,14 MB) files.
When printing the same document when connected to the printer with the usb cable, the document will print correctly.
I have followed the steps of wizard for wireless set up, and when I printed the confirmation page, all was set correctly.
The router I’m using is a Linksys WRT45GL. The IPs are set by dhcp and I don’t have a MAC filter active.
Can you help me with my problem?

Does anybody have an idea where to start looking at least? Where could be the problem?

Similar Messages

  • Aluminum Wireless Keyboard not working properly after Firmware update 1.1

    Hi,
    Well, as the subject says, my keyboard is not working properly after I updated the firmware. The problem is that several keys (delete, down arrow, brackets and apostrophe) stopped working right after I installed the update. I never dropped it or hit it. And I did not stop or interrupt or did anything during the install. I take very good care of it.
    I have already tried toubleshooting with the support page, restarting the iMac, taking off the batteries, setting it up with bluetooth again, going back a week with time machine and to reinstall the firmware. So, if you have something new for me to try, I will really apreciate it.
    Thanks in advance.
    Franco.

    I have 24" iMac with the Apple wireless M&KB - I know this is basic but have you tried a fresh set of batteries? My KB will refuse to establish connection when batteries are on the weak side the firmware update may just be a co incidents. If your wireless mouse is working OK then I would guess the blue tooth is functioning.
    Not sure about the 10.49 download - are your other file downloads completing properly? Are there any error messages?
    Steve

  • Wireless printer not working after 10.5 upgrade

    My Canon All-in one MP600 was working fine using 10.4.11 and Airport Extreme Base Station. I upgraded to 10.5.4 and now the printer does not work. I checked the Airport utility and the printer shows under printer. The printer works fine on my wife's MacBook. The old printer setup utility app is not present on 10.5. Am I missing something? I followed the instructions to install the wireless printer but it still does not work. It works fine when I use the USB cable directly to my powerbook G4.

    Found problem. Removed printer from Sys Prefs -> Printers and Fax and re-installed it. Works now.

  • Apple airport express wireless printing not working on Windows

    I have installed the Airport Utility v 5.5.3 and Bonjour Printer Wizard on my Windows XP (SP3) machine. I have successfully set up the router, but am unable to print wirelessly. In the utility, I see my printer and have selected the checkbox Share printers over WAN. I have the driver printers installed on a Windows laptop, but am unsuccessful printing from the laptop.
    I read somewhere that I need to set the Internet > Connection Sharing to Off (Bridge Mode). I did that and then got the following error and then can't connect to the internet via the router at all:
         An error occurred while trying to access the Apple wireless device. Make sure your network connection is valid and try again. Error -6753.
    I have tried setting up Bridge Mode several times and ensured my virus protection and firewall were disabled, but always the same results, so I reset my router and am back to using the Internet > Connection Sharing option of Share a public IP address. 
    The whole reason I bought this router is because it is supposed to be easy for wireless printing, but this has been far from easy to set up. So frustrating. Any suggestions?

    Thank you for your quick response. Yes, I have Bonjour Print Services installed. I thought I had to select Share printers over WAN for some reason. Just now I deselected this setting, updated the utility and wireless printing still does not work .

  • HP 6980 wireless printing not working

    I cannot get my printer to go wireless.  I have tried all the advice I have seen so far but teh wireless does not seem to connect.
    I have tried the SES but the wireless light continues flashing and then turns off.
    I have gone into the printer through its IP address and it does not come up with the router in the list.
    I have manually entered all the details in the advanced tab, but when I unplug the ethernet cable the report page says
    wireless status disabled (even though the blue light is on)
    I can only think that the wireless facility is broken or am I missing something.
    I am working from windows 7 and the driverers are installed and working normally when connected by ethernet cable.

    Does anybody have an idea where to start looking at least? Where could be the problem?

  • Scanner and Wireless Printing Not Working

    Most of the features in my new printer are not functioning probley. The scanner does not work at all. Whether I'm using th wireless network or the printer is connected with UBS. Wireless printing is not working too.  I don't know what to do. I tried to contact the customer support, but in order to do that, I had to provide the serial number. I put the number, but it said that they're unable to identify the serial number. Listed below all the information pf my frustrating printer.
    My compurt is MacBook Air. OSX 10.7.5
    Model: Deskjet 3050A J611
    Serial No.: {Removed for privacy}
    FPU No.: CR23164001

    Hi Alsahafi,
    I mention they were unable to verify the serial, was this a new in box printer?
    Also, make sure you've installed the full feature driver for your OS X version, you can find this download here.
    Don't forget to mark a post as solved if it fixed your issue

  • Epson NX420 wireless printing not working

    After upgrading to Yosemite, I noticed the printing capability on my NX420 was gone. I get communication errors and a prompt to download software; but after downing, a notice for error downloading. No updates show up via App store.
    I have downloaded the software via Epson and installed; but it still doesn't work. My son's i5 iMac running Yosemite is printing fine wirelessly.

    Hi @AllysonR , and welcome to the HP Forums!
    I see you're experiencing connectivity issues.  I would like to help!
    I'd recommend performing a power reset.  Disconnect the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug the printer back in. Ensure you plug the printer directly to a wall outlet. Make sure to bypass any sort of surge protector or power bar.
    I'd then suggest following this document:
    Wireless printing center Troubleshooting Issues
    Good luck and please let me know the results of your troubleshooting steps. Thank you for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • HP Photosmart Premium C309g-m Wireless Printing Not Working

    I have a HP Photosmart Premium C309g-m running as a network printer that is not working on my Windows 8.1 laptop.  I have tried uninstalling and reinstalling the all-in-one software, which did not help (and the solution center software had issues, but a test page did successfully print), nor did the HP troubleshooting software.  
    Whenever I click print nothing seems to happen, I see no document in the spooler.  I have also tried selecting the 'printer properties' only to have a pop up say the driver is not installed.  
    I need help!!!!

    Hi ZacharyW, and thanks for getting back to me!
    I know you have uninstalled in the past, but I would like to take a bit of a different approach:
    First, you'll want to uninstall the current software:
    Uninstalling the Printer Software
    Then, put your printer into clean boot mode:
     How to perform a clean boot in Windows
    Once the computer is in clean boot mode, reinstall the software via the HP Printer Install Wizard for Windows.
    Good luck and please keep me posted!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • C7289 All in one- wireless printing not working

    It looks like all connected for wireless printing, however, nohing will print! Please help

    Print a Wireless Network Test from the front of the printer (Setup > Network area).  Does the printer have a valid IP address (not  0.0.0.0 or 169.254.x.x)?
    Tell me about your network - router brand/model, encryption type (WEP, WPA, etc) and ISP type (DSL, Cable, etc).
    What operating system?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • MFP 177 wireless printing not work on win8.1

    Hi,
    Just bought a HP color Laserjet MFP177 4 in one printer. After installation (and many attempts) i am failng to print from my PC. However it did print the test page at the time of installation and scanning function is working fine.
    Please help

    Hi @Razeen ,
    I see that you are not able to print over the wireless network, but you can scan. I can help you with this.
    Temporarily turn off any Firewalls to make sure they aren't interfering.
    I have provided a document to try and resolve this issue. Also download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it.
    'Printer is offline' Message Displays on the Computer and the HP Printer Will Not Print.
    Disregard the title.
    What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
    Please provide in detail the results if you are still having issues.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Deskjet 6988, wireless printing not working. Network light blinking.

    Deskjet 6988 will only print when connected via USB, used to work wirelessly.....now network light on printer blinks.  Please assist. 

    Get the latest software for your printer from the "Support & Drivers" link at the top of this page, run it and choose Network or Wireless installation when it asks.
    What operating system are you using?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • IOS6: Beats Wireless Does Not Work Properly With Bluetooth

    Half year ago, I spent 400 USD of my hard-earned money on a Beats Wireless headset (v2).... LOVE that headset... great sound when playing music and very good sound quality too when talking on the phone (iPhone 4S).
    However, since "upgrading" to iOS 6, my Beats Wireless headset keeps on stopping when I play music (or skips parts of the music)... it is ANNOYING to say the least!
    It's my understanding that it's a known problem, but WHY does Apple not DO anything about it??? The issue has been there for a long time now, and people who use Bluetooth in their cars have reported issues with using Bluetooth, too! Apple actually puts the lives of those drivers in danger by not fixing the problem!!
    WAKE UP, APPLE!!!
    I am just SO disappointed by Apple and iOS6... I am strongly comtemplating selling my iPhone and NEVER go back to an Apple product again!!!!!

    I concur.  I have the same problem with my Wireless Beats and my iPhone5.  Skipping and disconnecting mid song.  I'm hoping this will get fixed with the next update.  Funny thing is, my other bluetooth devices, jaybird, LG soundbar work fine...  I don't know who to point the finger at because it worked fine prior to upgrading my iPhone4 w/ iOS6.

  • PRINTING not working properly in OSX Tiger 10.4.10.

    For whatever reason whenever I try and print 2 pages or more in Tiger I seem to have issues. I am using a HY Deskjet 842C.
    AppleWorks 6.x and Quicken 2005 cannot print documents that are more than 1 page. And I recently just tried MS Word 98 and it also has issues with printing docs more than 1 page.
    However I can print web pages that are multiple pages and TEXT files as printed in TEXT EDIT.
    What happens when I try and Print is the printer makes strange noises, prints the last page and stops there with the paper stuck in the machine. I then have to yank the paper out or turn the printer off.
    Anyone got any tips?
    John

    I deleted the HP Deskjet 842C printer driver and re-added it, and the problem seems to have vanished (for the moment). I can know print in Quicken, AppleWorks and Word.
    However what I do not understand is why I could print 2-3 page web documents in FireFox, and 1 page docs in Word. If I was having a printer error, strange why I still could print in some ways.
    As good as OSX is, its lagging in a few areas over OS 9. But not to say I would ever go back. But printing is something I almost never ha a problem with in my OS 7-9 days.
    Printing seems to be a common problem in X.
    John

  • HP computer will not work properly with an HP printer

    I have the following two items that I am trying to use together:
     - HP 23" TouchSmart Desktop, T6500 2.1GHz 4GB DDR3, 500GB HDD (Windows 7)
     - HP OfficeJet 6500 Multi-Function Printer/Scanner/Fax
    When I try to scan to Adobe Acrobat Professional 9.0, the document goes through the scanner, however the dialog box that I would expect (e.g. "Next Page" or "Done") never shows up.  At this point, the system is unresponsive with respect to Adobe or the printer.
    I suspect that it is waiting for the input from the dialog box that never showed up.  I tried to move the other windows to see if the dialog opened in the background, however I am not able to select any of them (they remain frozen).
    I contacted HP Support, only to have them tell me it must be the driver, and I have an "old" printer.  (I did not realize that a 9 month old printer was considered "old").  I have tried all of the possible drivers that are available (original disk, downloads, other downloads from HP tech support), none of these resolves the problem.
    In any case, they were unable to resolve the problem of having an HP computer work properly with an HP printer.  (The printing function seems to work, just very slowly).
    Has anyone else heard of this?  Is there a resolution?

    Update: I am still looking for a solution to this problem - the scanning portion of the Multi-function OfficeJet 6500 does not work properly with the HP TouchSmart computer.
    I have not been able to find anyone in HP that can tell me when (or if) new drivers will be released for this printer.
    I decided to investigate upgrading to a newer version of printer since HP told me the 9 month old printer I have was "obsolete", only to find that the identical printer is still on sale in many stores.  Hmmm....
    I feel like I am getting the run-around from HP.
    I have since tried several more driver/software combinations, but every time I have the same problem (as described in the previous post).
    If anyone has any ideas or suggestions, I would be most happy to hear them.
    Thank you.

  • I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I cannot connect to the internet wirelessly. the wireless light has a fast green blinking light. how can I fix the router?

    I have a Linksys WRV200 wireless router and the wireless signal is not working properly so I am unable to connect to the internet wirelessly.  The wireless light is blinking green very quickly and I connect and disconnect from the network constantly.  How do I get the router to work properly

    Hello James,
    The flashing WLAN light means activity (data getting transferred). Try disconnecting all your devices and check whether the light is still flashing or disconnect the router from internet and do the check.
    Do you have your SSID as linksys or the default one? If your neighbor has the same SSID, then traffic could result from your neighbor's one. Try changing your SSID and password. Make your security WPA/WPA2.
    Hope this helps,
    Thanks
    Vijay

Maybe you are looking for