Wireless printing on HP 6500A Plus -wireless does not work

windows 7, linksys E2000 router, sony vio computer wireless N.
No issues printing by USB. When using wireless, prints first few lines, then slows to a stop. Loses feed from router and disconnects. Tried disabling all firewalls, removed antivirus, etc - nothing is working. Not the only computer in household with same issue as well - Toshiba running xp is having same problems. Need fix or I will trash printer and never purchase HP again and I have long been an HP customer for printers.

There have been a few issues with printing using the new E-series Linksys routers. Make sure the router has the latest firmware. If that does not work, set a static IP address for the printer:
- Print a Network Config Page from the front of the printer. Note the printer's IP address.
- Type that IP address into a browser to reveal the printer's internal settings.
- Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
- On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). Yours is 192.168.1.100 to .149. Let's use 192.168.1.200 for your printer.
- Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
- Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
- Click 'Apply'.
Now, shut down the router and printer, start the router, wait, then start the printer.
After this you may need to redo 'Add a Printer' using the new IP address.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

3 times..i hate 4500 wireless printer,,,can i return...does not work

heloo...4x...i hate 4500 eireless printer...can i return

Hey there!
Im sorry to here that. But if its not working properly we can try to troubleshoot. But regarding your question if you can return it. Ofcourse you can, provided that you purchased it within a month.
if one of my advice works or helped a little, you can click the *KUDOS* button on the left. thanks.
Disclaimer : Even though im working for HP, all comments and suggestions are my personal opinion. HP still has a process to follow. (But i hope it will help ü)

Printing only odd/even numbered pages does not work

I've got following problem: Printing only odd/even numbered pages does not work. Not in Preview, nor Adobe Reader. I Don't know why. i'm using a hp Color LaserJet 2550L. I just worked fine, but I cannot remember the time this failing first occured. I really hope the problem will be solved quick and easy.
Thanks so far
Bastian.

Mine does not work either. I have trashed prefs, rewrote permissions, ran Disk Utility from a separate HD, etc. and I cannot get this feature to work.
I got 45 odd pages to print last night and now it won't print odd or even pages. I am reduced to printing every backside page one at a time. If I would have known about this problem before I could have saved myself an hour and just printed them all on single sided sheets. I tried to save paper and now I'm screwed (timewise)......
Any other suggestions would be greatly appreciated.
Thank You,
Dave Buckley

In printing a document my preview mode does not work??

in printing a mail recieved message my preview mode sends a message stating Preview is not supported???

I have paid the full extended version, but it is not working. See my screenshots.

Printing problem: "fit to page" option does not work, even from cmd

hello!
i am switching a company over to linux, that's why i am trying to make it shine as much as possible!
unfortunately i have to explain why something as simple as printing an email to one page instead of 1 and half isn't working...
no matter what i always get the same layout ... through
a) print menues which give me the option to scale to page e.g. firefox's print menue or
b) command line with the option found in (http://localhost:631/help/options.html#FIT_TO_PAGE)
lp -o fit-to-page filename
lpr -o fit-to-page filename
they both do not result in a scaled to one page output, instead i get the same result a print without any extra configuration gives me (2 pages).
i don't know where to report this problem!?
since i don't know whether it is an arch, Canon, CUPS or postscript problem ...
my setup is:
manjaro/arch linux (latest packages)
CUPS 1.7.1
canon imagerunner irc2880 - printer language = postscript
gnome 3.10
(i use the canon "cque" aur package to get the only working ppd for this printer (cel-irc2880-ps-de.ppd) [working = print both b/w & color] ... ps stands for postscript.
pls help or direct me to the right channels
THANK YOU
Last edited by brrbrrbruno (2014-04-14 11:26:40)

i have checked with another printer ... same problem
can anyone with firefox tell me whether the checked checkbox
"ignore scaling and fit to page" or something (mine is german) under:
firefox -> print... -> options
works for you?

Print VI front panel to file does not work after building executable.

I am using a property and invoke node to print the front panel of my VI to an HTML file. It works fine in the development mode. After Building the application, this subvi will no longer
print the front panel. Is there some special files that included in the build??

You can use the Report Generation VIs to generate the HTML report. Specifically, you could use Append Front Panel Image to Report.vi and Save Report to File.vi to save the image of the panel to an HTML report.
Check out the examples in examples\reports to get a better idea how to use these VIs if you've never used them before.
Good luck,
-D
Darren Nattinger, CLA
LabVIEW Artisan and Nugget Penman

COMMAND plus T does not work on the keyboard but does from the menu...

Is there a way that that shortcut could have gotten shut off from the keyboard? When I click on file or edit and then go to something like "make new tab (command t)" works fine but from the keyboard it does nothing.

System Preferences->Keyboard prefPane->Keyboard Shortcuts->Restore Defaults and restart.

Vivienne Tam wireless Mouse does not work.

My wife's Vivienne Tam wireless Mouse for HP Mini 210-1032VU does not work anymore, but the light at the scroll wheel keep flashing/flickering.
We tried changing the battery, but that did not help.
Any suggestions what the problem might be? The mouse is still under warranty.
Any help is very much appreciated.

i have a disease in both hands. It causes a boney like process to grow in the palms of my hands causing my hands to draw up like a claw. Repeated operations for the rest of my life are happening. It is more and more difficult for me to hold a mouse of any kind.
So the vivienne tam mouse has a smaller rise. The microsoft a high rise mound that hits the nerves causing intense pain. The pain makes me break out into a sweat. Where can I find the correct vivienne tam driver? It used to be online. I understand vivienne tam hp driver was taken off the site. it got lost on my computer when the computer crashed. What can I do? how do I get that unique driver back. I alread wrote hp and microsoft online and no help. the driver is specific to the tam. I wonder how many other people have pain with this disease process. The logtech also has a high rise hill in the palm as well. Help anyone

How can i make a soft return with pages shift enter does not work!

how can i make a soft return with pages shift plus enter does not work!!

On full keyboards with a numeric keypad, the key above the right shift is "return" & the one on the numeric section is "enter." On a Mac (or Apple IIgs ) they do have separate functions. On the "mini" keyboards, both names are on the same key, but "enter" is written in smaller letters. I'll have to check to see how that works on another Mac later today.

I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

I have a macbook pro. i have a photosmart 7510. we just bought a new windows tower and the printer works wireless for us, but now the mac does not print anymore wirelessly. i keep getting a message Network host 'HPE93F2A.local.' is busy. what can i do to

it is a windows 8

Wireless Card does not work in Windows 8.1 for G585

I just wanted to inform someone that the wireless network card does not work in Windows 8.1 Preview. I suspect the driver needs to be updated. When I go to the Device Manager it appears as a Realtek device RTL8192DE instead of a Qualcomm device that does not start. I tried installing the latest driver from the website but it makes the computer crash (BSOD) when trying to reboot after the installation which makes the Windows 8 automatic recovery turn on and I had to restore the system to a previous state before the driver installation.
For now, I just refreshed my system back to Windows 8, instead of trying to use Windows 8.1 Preview . If you have any suggestions, it would be great, otherwise I'll wait for a driver update.

neilwar wrote:
Oh goody. Just updated to 8.1 and it doesn't work. Looks like everyone else is having the same problem. Why no answer from Lenovo?
Please refer to the dedicated thread on "Blue" 8.1.
Thread locked
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Officejet 6830 wireless scan does not work

Wireless scan to computer file does not work ever. Scan starts and then computer losses connection to scanner before scan can send file to computer. Happens both when scan is started from computer and when scan is started from scanner. After that, browser interface reports scanning is disabled. This sometimes causes entire device to fail to respond to anything, including power switch, must be disconnected to power and reconnected to wake up. HP Print and Scan Doctor gets the same failure and cannot fix the problem. Document printing works. I have had this failure on two different scanners. I thought there was a manufacturing defect so I returned first and received another. Same exact problem.

Hi,
Thank you for your reply.
For that you will have to contact your network administrator, ask them to grant you access to use the resources on the local network when you are connected to the VPN. So that you can use the printer, when you are connected to the VPN.
As I Said earlier, when you are connected to the VPN you completely on a different network (Office Network) and you are disconnected from your local network. Your local network will just be acting as a bridge.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
(Although I am employed by HP, I am speaking for myself and not for HP)

I get wireless connection but my internet does not work on my ipad 2

I get wireless connection but my internet does not work on my ipad 2

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Kernel 2.6.32 does not work with RT2860 Wireless Card

since 2.6.31 my RT-2870 is not longer working
ifconfig says that the Wireless ra0 was renamed to wlan0 and since then its not longer working
since 2.6.32 my RT-2860 (build in) is not longer working too
it was renamed from ra0 to wlan0 too and read above^^
whats happening there?
since now i used wpa_supplicant but i already tried with NetworkManager and WICD
//Edit: 2870 works in 2.6.32
Last edited by Vamp898 (2009-12-17 06:58:27)

The Official RT-2860 from the RaLink homepage does not work too
Homepage: http://www.ralinktech.com/support.php?s=2
Error:
make -j3 HOSTCC=i686-pc-linux-gnu-gcc CROSS_COMPILE=i686-pc-linux-gnu- LDFLAGS= -j1 -C /usr/src/linux M=/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux PLATFORM=PC CHIPSET=2860 RT28xx_DIR=/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0 RT28xx_MODE=STA clean modules
make: Entering directory `/usr/src/linux-2.6.32'
CLEAN /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/Module.symvers /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/modules.order
LD /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/built-in.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_md5.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_sha2.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_hmac.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_aes.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/crypt_arc4.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/mlme.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_wep.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/action.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_data.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/rtmp_init.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_tkip.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_aes.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_sync.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/eeprom.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_sanity.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_info.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_cfg.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_wpa.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/dfs.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/spectrum.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/rtmp_timer.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/rt_channel.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_profile.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_asic.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../common/cmm_cmd.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/assoc.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/auth.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/auth_rsp.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/sync.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/sanity.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/rtmp_data.o
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/rtmp_data.c: In Funktion »STAHandleRxMgmtFrame«:
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/rtmp_data.c:689: Warnung: Variable »pRxD« wird nicht verwendet
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/connect.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../sta/wpa.o
CC [M] /var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.o
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c: In Funktion »RtmpOSNetDevAttach«:
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1689: Fehler: »struct net_device« hat kein Element namens »open«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1690: Fehler: »struct net_device« hat kein Element namens »stop«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1691: Fehler: »struct net_device« hat kein Element namens »hard_start_xmit«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1692: Fehler: »struct net_device« hat kein Element namens »do_ioctl«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1702: Fehler: »struct net_device« hat kein Element namens »get_stats«
/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.c:1736: Fehler: »struct net_device« hat kein Element namens »validate_addr«
make[1]: *** [/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux/../../os/linux/rt_linux.o] Fehler 1
make: *** [_module_/var/tmp/portage/net-wireless/ralink-rt2860-2.2.0.0/work/2009_0918_RT2860_Linux_STA_v2.2.0.0/os/linux] Fehler 2
make: Leaving directory `/usr/src/linux-2.6.32'

How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)

How can I print to my HP OfficeJet 6500 Wireless Printer from my iPhone 4S which used to work (on prior iPhones) before AirPrint printers were even available? (running Mac Lion OS, all software and HP sw updates are all performed)
I don't get it, I read one post about why would we have to buy an AirPrint Printer when we have used the "print to a wifi printer" just fine in the past? Yes I feel that's exactly what's happening to me now too. I want to print from my iPhone and iPad to my WiFi Printer which is also now connected to my Airport Express WiFi network just fine. No problems.

Very glad you added that bit of information because I see different problems similar to this. I want to share with them what you did and hopefully you not only fixed your specific problem but you can lend some more advice to others with problems like this. Thanks!
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Wireless printing on HP 6500A Plus -wireless does not work

Similar Messages

Maybe you are looking for