Wireless printing problem with HP Envy all-in-one 110 when running Mac OS 10.7

I just bought the HP Envy all-in-one 110. I have a Macbook Air running IS 10.7. I managed to install the software correctly and the wirless network light is showing on the printer. I ran a test page from the printer and all the settings say they are "enabled." But I still can't get the printer to print over the wireless network. When I plugged in a USB cable, I managed to get it to print. I have a wireless router running over the Sonic.net DSL network. Network strength is good. I've switched off and restarted all equipment several times but still no results. Help!

Hi,
I believe the router may not support Multicasting, a network protocol used for Apple's Bonjour service to operate as it should.
Will be helpful to know the exact router brand and model.
As a workaroung, you may try setting the printer by using standard IP, it should allow you to print, however the router issue (more likely) have to be handled first to allow the full software functionality including scanning.
Follow the steps below to set an IP print queue, it will also help to better understand the cause for the problem:
Enter System Preferences > Print & Scan.
Click the plus sign.
Click the IP icon.
Select the HP Jetdirect Socket protocol.
Enter the printer IP address into the Address field
Now try printing using the newly created print queue, listed as the printer IP address.
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Similar Messages

Printing problem with HP F380 All-in One printer.

My HP F380 All-in One has stopped printing in colour. Don't know if I've accidentally changed a setting but I've unchecked 'Print in grayscale' and no difference. Can anyone please advise.

Hi there,
Welcome to the HP Forums!
I understand that your HP F380 has stopped printing in color, and I am happy to help you with this printing issue!
For further assistance, I will need to know the following:
If you are using a Windows or Mac Operating System, and the version number. To find the exact version, visit this link. Whatsmyos.
If the printer is able to make copies by itself.
If the power cable is plugged into a surge protector, or directly to the wall outlet. Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector. This applies to Inkjet printers as well.
In the meantime, please take a look through this guide. Streaks or Lines in the Printed Image.
Hope to hear from you, and thank you for posting!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Can anyone help; re: Faxing problems with my 6200 all in one

Our HP office jet 6210 which we use only for faxing and minor printing intermittenly goes crazy with blinking red and amber lights
when a fax is being received or when we are sending one. When the fax fails and we stop the blinking lights, it self tests then turns off. Sometimes when it does this we get an error message printed that says "Power Failure." The party being faxed gets 1/2 a fax or 1 page out of 5. I'll unplug it from the electric and plug it back in and then it will work fine for a day or two. We have tried faxing from the glass when we have problems and that seems to work when self-feed faing doesn't. We have not installed any drivers as this is not plugged into a computer but stands alone with it's own designated phone line.
Any ideas??? The machine is 5 years old and has never given us any trouble until now. Is it time to upgrade?
Thanks so very much!!!!
Joanne

I have a new photosmart plus printer B209a CD035A and I have never been able to set up the fax, I get a message saying that the phone line is not connected to the modem, the phone is connected to my modem or I would not have an internet connection, perhaps I am not understanding it, I have the printer set up wireless now but it was wired before and I still could not set it up, I purchased it in April this year along with my new desktop Elite HPE-150f model AY603AA, using windows7 64 bit, now I have a problem with the alignment, all the fonts are cut off down each side which makes it hard to read instructions, can someone give me some help with this. The alignment problem has only just started this past 2 weeks. thanks

Wireless printing problem with hp officejet 100 mobile printer from win 7 dell laptop

My hp officejet 100 mobile printer was working fine with my dell XPS 15 in bluetooth wirelessly until my laptop crashed. Now I can not get it to print internet info except with hard wire connection. Page loads half way and then stops. Must shut down laptop and shut off printer or hard wire and shut off bluetooth. down loaded lastest drivers to no avail. printer will print from cell phone and win 8 computer via bluetooth but not win 7 laptop.

Sorry you are having problems with printing from the internet. I have a few more questions to ask you before I can be of much assistance.
What web-browser are you using?
Do you have any problems printing from Word or other non-internet documents?
What did you do to fix your computer (system restore, clean install of the OS, etc)?
Have you tried an alternate web-browser?
Make sure to install all of your Microsoft updates to see if that helps. Otherwise, answer those questions for me please and I will be happy to help.
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

HP Wireless Printing - problems with MAcbook Airport

I've read through most of the problems related to printers on here and I think I have a unique one!!
I've just bought and installed a HP C8180 all-in-one printer. Installed as per instructions - on home network and across ethernet. I've reserved an IP address for it so its always in the same place. Works brilliantly (good printer!). However if I then disconnect ethernet and connect to my network via airport - it won't print! It will however, align, print test page (albeit slowly), clean cartridges etc - but no printing.
If I disconnect from Airport and reconnect to ethernet - no problems it prints fine. If I then connect via airport (keeping the ethernet connection at the top of the list) it works fine. If however airport is top of the list - it won't print.
Prints fine on USB too.
So I've deduced that for some reason its the Apple Macbook wireless that's causing the problem.
So does anyone have a solution - 'cause this is driving me nuts!
Thanks in advance.

I have a HP Photosmart 2710 All in One connected to a Aiport Express USB port, it works great, the WIFI in the printer doesn't work because it doesn't support WPA2 so I disabled it. The main router is quite a ways away but I still want to print to the printer wirelessly.
My suggestion:
1. Connect the printer via USB directly to macbook to load and test driver.
2. Use Airport Utility and configure Airport for printer, if it is already listed, remove and reinstall it.
3. On your Macbook it should change the driver from USB to the name of Airport, sometimes it helps to turn off the printer and turn it back on while connected to Airport.
Keep messing with it, it can be stubborn with Bonjour but it finally shows up. Make sure the Airport Utility can see the printer when connected to it.

Printing problem with HP Envy 5530

I'm using the Instant Ink service but intermittently I am unable to print. The printer simply displays a message "Printing" but nothing happens. Any ideas?

Hi ,
Welcome to the HP Forums, and thanks for posting! I'd like to help you with the hang-ups you are experiencing when printing to your HP ENVY 5530 e-All-in-One printer. Firstly, do you have the printer plugged directly into a wall outlet? The printer has a power moderator built in, so if it is plugged into a power surge or battery backup, it can cause serious power fluctuations. The most common cause of the hang-ups that you are experiencing, would be if the printer is unable to pull power fast enough to complete the action. If that doesn't immediately resolve the issue, can you try to make a copy on the printer for me, and let me know if it completes? If the copy works fine, the issue may have something to do with your wireless connection or the software installed on your computer. Please answer the following questions so that I'm better able to assist: What operating system, and version do you have? Mac or Windows ?What program are you printing from?Have you tried printing from multiple programs or multiple file types?I look forward to hearing back and working towards a resolution for this issue.

Wireless printing problems with 10.5.4 and Epson printers

Anyone else know about problems with Epson printers such as this no longer functioning wirelessly with bonjour once upgrade to 10.5.4? It appears they are not supporting this with a new driver yet?
At this time, Epson says they have no drivers for 10.5 and this specific printer but wondered if there are more general problems with 10.5.4 and bonjour with Epson or others?
Thanks
Paul
MacBook Pro Mac OS X (10.5.4) Using Epson CX11-NF printer

I have 5 computers-G4 PowerPC, two G4 12" laptops, G5 Mac Pro dual, Macbook Pro--with the older computers all running 10.4.11, the new ones 10.5.4. Until Friday, I was able to print with all of them to an Epson Stylus Photo R200 via Airport Extreme. After installing software for my new G3 iPhone on the G5 Mac Pro the printer connections on all the computers stopped working. I have so far been able to get the G4 Power PC to print, but none of the others. I have tried Bonjour, Gimp-print v.5.0.0-beta 2, cleared all the print drivers and restarted, and everything else I have been able to find on both Epson and Apple sites. The Printer Set Utility described by Epson does not exist in Leopard machines, and doesn't work for the older laptops. As soon as I select one of the printers in the "selected printer in print dialogue box" it grays out. I have set up sharing on the G4Power PC that does print, but it is not accessible--it shows up but is grayed out. There is a diamond next to the printers in the Print dialogue box in applications' menus, but it still doesn't work. It either cannot make the connection, cannot find the printer, or keeps spinning with the message that it is finishing printing (but it hasn't even started.) Again, everything worked fine until the new iPhone was added to the mix. My old iPhone didn't cause any problems. This is really a problem. Any suggestions welcome.

Wireless printing problems with Canon iP4300, but USB printing ok

My MacBook Pro is setup for wireless printing with a printer(Canon Pixma iP4300) connected to my other PC Desktop. The only problem is that when I print anything all the text and images are miniaturized and squished about a quarter of a page large into the upper left corner of an 8.5x11 paper. I installed all the programs that came with the printer installation disk and when I connect my MacBook directly to the printer via USB everything prints out just fine.
I suspect the problem is with the selection of printer model when you go to "Printer Setup" in System Preferences. The existing list of Canon printer models given to me by the computer does not contain anything specific for my iP4300. I simply chose the option "BJC 4300 Gimp-Print v.5.0.0-beta 2". Does anyone know of a way where I could add to that list of printer models or is there another way to get my wireless printing to work normally? Thanks to anyone who can help.

I have the same printer and network printing is a pain. Canon decided not to include a network specific driver for this printer.
You can try getting the latest version of the gimp-print drivers. The latest version has better support for ip4300. If it's worth it to you, PrintFab drivers have been working for me but PrintFab isn't free.
The latest Gimp-print (Gutenprint) drivers are here: http://gimp-print.sourceforge.net/MacOSX.php3
Hope that helps.

Wireless printing problems with Asus router RT-N56U and HP8500

Neew MacBookPro with Lion. Also have HP 8500a 909a printer hooked up to an Asus router RT-N56U Google search indicates MANY problems with HP printers being used with wireless Mac, even with Airport. Of course we know HP is one of the worse customer support companies on earth,, so I came here in hopes to find a solution. I updated my mac and firmware for router. The Mac doesn't find any printers wirelessly at all. If I hook up with a cable it works fine.. Thanks

I own the RT-N56U (best router on the market hands-down), along with an HP LaserJet 1320, however it's connected via USB to my computer instead of the router. While it's true that HP don't have a terrific support record for Mac drivers in fairness it may be the Asus router causing the problem; if you Google "Asus RT-N56U" and "mac os x print server", you'll find complaints similar to yours from other users. From what I understand this is partly dependent on your printer and whether it supports network printing, and partly on compliance with the Asus router firmware. I Googled what appears to be a possible solution to configuring the Asus print server, however I haven't yet tested this myself:
http://forums.techarena.in/networking-security/1424669.htm#post5384770

Ink Cartridge problem with the 7525 all in one printer

I put all new cartridges in the 7525 all in one printer and it keeps telling me that the cyan cartridge is damaged. also the ink levels on the new cartridges are not appearing full. they are all new HP cartridges.

The troubleshooting steps in the document here may help resolve the issue with your cyan cartridge on your Photosmart 7525 printer.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Power problem with my 4620 all in one printer / scanner / fax

Hi,
My problem is this. I have a 4620 all-in-one printer / scanner / fax. However, I have discovered this problem.
Scenario:
The printer hasn't been used for a day or two but is plugged in still with the light above the power cord on. I want to print a word doc or whatever. I click print. I obtain a message that the computer (via wifi) can't communicate with the printer. Pressing the Power on button on the printer interface doesn't work.
My solution, I have to disconnect the power supply from the printer, then reconnect and then press the Power On button.
This isn't normal I think. I don't think for one minute that I should have to go and disconnect and reconnect the power suppy for it to print etc.
Any ideas?
Thank you in advance!!

maybe here: http://discussions.apple.com/thread.jspa?messageID=11110856&#11110856 ?
found doing a quick search of the forum
all results here: http://discussions.apple.com/search.jspa?objID=c263&search=Go&q=laser+printer
JGG

Wireless printing - problem with MAC integration

Hi everybody.
Just bought a Macbook pro and cannot get it to recognize my printer.
Devices within network:
- Belkin WLAN Router
- HP Laserjet CM1312 multifunctional printer - with HP 2101nw wireless G (printing and even scanning works fine wireless!)
- Acer Notebook with XP Home (used to set up the 2101 wireless)
- Acer Netbook with XP Home (added later to network, no problem with printing, setup took 5 min)
Antivirus software: Avira Premium Security Suite on both XP's
WPA-PSK encryption, no mac filtering.
The Macbook can access internet, but nothing happens when I try to print. I wanted to stop the hassle that Windows is causing occasionally. Frustrating experience with the Mac so far.
Can anybody help?
This question was solved.
View Solution.

I have removed the printer, and added again - a couple of times. I was not sure what protocol to chose (LPD, IPP, Socket).
I took your advice and tried, but with the right click (ctrl pressed), nothing happens. The normal window for the print queue opens, and I cannot select anything like "Reset Printing System".
This does not work either, no Printer with "Bonjour" is offered for selection:
"Select the plus sign to re-add it. Look for the printer with Bonjour next to it, select it and wait until the "Add" button becomes available. Click it."
When I select the plus sign, I can only make settings in the "IP" area. Standard, Fax and Windows have nothing to select or to put in. "IP" offers Protocol to select and Address to fill in. I put in 192.168.2.6 and tried the different protocols. "Print with" offers generic PostScript printer, Generic PCL Laser printer, "other" and printer software - thats where I selected the driver for the cm1312
Can you tell what I did wrong? Thanks for trying

Problems printing envelopes with HP 4480 all in one

I purchased the HP 4480 all in one because I was told it would do the job(we hold a reunion each year and write to over 110 people. However I have had nothing but trouble (30 envelopes wasted already) it jams-jams-jams) sometimes at the back and sometimes at the front lots of messy hands!! Have now started to write the envelopes which defeats the whole idea of speed. Can any one help or shall I bin the printer not a year old yet.

I've had the very same issues with printing envelopes. I'm using standard #10 envelopes, so it should not be an issue. I have a new 4480 printer coming today to replace the one I have, but I am not encouraged about what will happen since I see at least another person has had the same issue.....we"ll see what happens...

Printer: Driver Update Problem with HP 6700 All In One Printer

My HP 6700 All in One Printer is not set up correctly on my laptop (16 months old),. I need to update the Driver but the auo system says the driver can not be found, when I try to do in manually it loads onto my lap top but does not update the printer. Any suggestions?

Hi,
I request you to try the following:
For network connection:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03086294&tmp_task=useCategory&cc=us&dlc=en&lc=e...
For USB:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03521864&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Although I am an HP employee, I am speaking for myself and not for HP.
Say thanks by clicking the "
Kudos! Thumps Up" which is on the right
Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue
Regards,
Ray

Having problem with HP Deskjet All-in-One 3050

I am trying to help someone who was given a Compaq Presario C700 (running Vista) and a HP All-in-One 3050 by her son. She doesn't understand how to use her computer, and it contains the remnants of things people have done to it trying to help her.
I believe her son set her up to use gmail by logging in the the gmail site and reading/writing her mail there. She would like to print her mail on the printer, and we managed to do that, even printing attached photos, but now printing doesn't work. It prints a Gmail header and her email address in color, but the text of the message, which is in b/w doesn't get printed. Print preview shows it as it should be. I created a simple document in wordpad and tried to print it and the same thing happened, except in this case the page was completely blank.
On the other hand, when I printed her inbox at gmail.com using File>Print, it did print the titles of messages listed.
The printer is connected to the computer over the local wireless network.
Could this have something to do with the cartridge being used up? Also, were that the case, wouldn't the printer indicate that somehow.
Any suggestions about how to proceed would be helpful.

Hello,
If you want to have the printer hooked up with a USB cable with printing option, then please try the below steps..
1.Click Start button on the Computer .
2.then click on Control Panel .
3.then Printers and Faxes
4.On top-left, click on Add a Printer
5.Click on Add a Local Printer
6.Then while "Use an Existing port" is selected , select "Virtual USB port ... " then click Next
7.from the Manufacturer list, select HP, and then under Printers list select Deskjet 990c" , then Click next and complete the wizard
Now try printing . It should work.
If you want to try using wireless installation then please visit www.hp.com/go/wirelessprinting
Regards,
Jabzi
Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
Click "Accept as Solution" if it solved your problem, so others can find it.
Although I am an HP employee, I am speaking for myself and not for HP.

Wireless printing problem with HP Envy all-in-one 110 when running Mac OS 10.7

Similar Messages

Maybe you are looking for