Wireless Printing to ETHERNET Printer Xerox Phaser 6180 via AE not working

I can not print to my Xerox Phaser 6180. It is connected to my ethernet network and works correctly via ethernet wire, but not via airport express base station.
Printer is not recognized in the network when connecting the Mac Book via Ethernet.
The base station is working - i can connect to the network and to the internet.
Any ideas?
MacBook 1.83 GHz Intel Core Duo, OS X 10.4.11

There is a Netgear switch, in which both the printer and the airport express are plugged by cable. To my opinion ths shoul work - that's what switches are for....
Any help really appreciated - thank you in advance.
Hans

Similar Messages

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network

Need help connecting a windows network printer to my Mac (Xerox Phaser 3600) over a windows home network.
My Mac runs lion and the windows desktop runs Windows XP
I have tried for a few hours or so to connect my mac to this printer over a home network.
For your information it does work when connected directly to my mac using a USB Cable.
If there is no soultion could I have help getting the drivers for a Dell All-in-One Photo 926

In most cases you can connect to the Windows shared printer from the Mac. But there is a dependence on the Mac driver being compatible. For many consumer inkjets, the vendor created driver cannot be used for this type of connection so you need to look at alternative drivers, such as Gutenprint or PrintFab. If you can tell us which brand and model of printer you have shared from Windows then we can answer your question with the preferred procedure on the Mac.

Xerox Phaser 6180

Hi,
I'm trying to connect a xerox phaser 6180 to my network. I have a macbook air running Lion and a macbook pro running Snow Leopard. I have an airport express base station 802.11g being used to extend my network which is run off a time capsule (802.11n 3rd generation). I have tried connecting the printer to the airport express via a USB cable and also via an ethernet cable. The laptops do not seem to be able to find the printer in this set up. Any suggestions?
I have tried connecting the printer directly to the macbook pro and it prints fine so it is not the printer but must be the network configuration - or it is not compatible.
Any suggestions?
thanks,
Daniel

Hi,
I'm trying to connect a xerox phaser 6180 to my network. I have a macbook air running Lion and a macbook pro running Snow Leopard. I have an airport express base station 802.11g being used to extend my network which is run off a time capsule (802.11n 3rd generation). I have tried connecting the printer to the airport express via a USB cable and also via an ethernet cable. The laptops do not seem to be able to find the printer in this set up. Any suggestions?
I have tried connecting the printer directly to the macbook pro and it prints fine so it is not the printer but must be the network configuration - or it is not compatible.
Any suggestions?
thanks,
Daniel

New Xerox Phaser 6180 and OS 9

I had to replace a Tectronix Phaser and I just got the new one, a Xerox Phaser 6180DN. It is on a LAN at my office (University Medical School) where I use a newer Mac running OS X plus a mixture of older Macs running OS 9 and some PeeCees. I had no problem with OS X in linking to the printer by ethernet, but in OS 9 it does not show up in the chooser using LaserWriter 8. Xerox does not have drivers for this printer under OS 9. Any suggestions?

I had to replace a Tectronix Phaser and I just got the new one, a Xerox Phaser 6180DN. It is on a LAN at my office (University Medical School) where I use a newer Mac running OS X plus a mixture of older Macs running OS 9 and some PeeCees. I had no problem with OS X in linking to the printer by ethernet, but in OS 9 it does not show up in the chooser using LaserWriter 8. Xerox does not have drivers for this printer under OS 9. Any suggestions?

Wireless Printing to Xerox Phaser 6180...does it work?

Is there a list of compatible printers for the Airport Express? I want to wireless print to a Xerox Phaser 6180

jmchugh, Welcome to the discussion area!
You only need to worry about compatibility if it is connecting via USB to the AirPort Express (AX). If it connects wirelessly, it is just like any other wireless client.
If it is to connect via USB, check out iFelix's list.

Pages won't print in color on Xerox Phaser 6110

For some reason, I have to print as pdf, then use preview to print the pdf version if I want the document in color. If I try just going from pages to the phaser, I get a black and white document instead. I've been trying to find a setting in pages that might limit the color, but haven't found it. Does anyone know what I'm doing wrong?

For some reason, I have to print as pdf, then use preview to print the pdf version if I want the document in color. If I try just going from pages to the phaser, I get a black and white document instead. I've been trying to find a setting in pages that might limit the color, but haven't found it.
In principle, if the imports colour photographs and creates colour page geometries in Apple Pages, then these objects will be colour managed to the digital graphic display, the digital graphic printer, and the digital graphic press. The colours will match provided the digital graphic devices have correct ICC colour space profiles and provided the conversions are configured correctly.
A digital graphic device that is capable of colour can be addressed in 1 bit (off/on without tone), grayscale (tone) and colour. How a digital graphic device is addressed cannot be defined by Apple Pages, it is defined at the device driver or at the device interface whether as a colour managed or colour blind command.
Apparently, the Xerox device driver is addressed differently depending on whether Apple Preview is rendering PDF or Apple Pages is rendering. If you can't find any setting in the Xerox device driver to change from grayscale to colour, the simplest solution is simply to save out PDF from Pages and print from Preview probably until OS X 10.6 is out.
To check the settings for the Xerox device driver, one place you might have a look is Print > Printer: (Xerox Phaser), Presets: (check that there is no preset for grayscale), scroll from Copies & Pages down to check ColorSync and also check if any application features and printer features that are able to affect a conversion to grayscale.
Hope this helps.
/hh

Can't print over USB to Xerox Phaser 3450 using 10.4.9

I am using Mac OS Tiger 10.4.9 and have a Xerox Phaser 3450 printer connected to my Quicksilver G4 via USB.
When I try and print the job spools and the printer whirrs to life, the panel on the printer changes from Ready to saying Printing PS3, then the job ends. Nothing actually gets printed, the little print centre dialog that pops up in the Dock shows the job go from the queue to the completed jobs tab.
Any ideas?

. . .Entering the thread in midstream--
What printer driver are you trying to use? I scoured the Xerox site for information on this printer. The manual indicates that it can use either PostScript or PCL6 as a printer language.
For PostScript, Xerox has PPDs for CUPS under the Unix drivers. These are in the form of a tarball. You can install the by using using a Control-click on the file and selecting to open with the BOMArchiveHelper or by using the Terminal. If using the Terminal, you can install the files directly by using the command --
<pre style="font-family: 'Monaco', 'Courier New', Courier, monospace; overflow:auto; color: #000; background: #DDD; padding: 0.2em; font-size: 10px; width:400px">tar -C /Library/Printers/PPDs/Contents/Resources/en.lproj <pathToYourDownloadedFile></pre>
You could also try the Generic PCL6 driver that comes with the Gutenprint/Gimp-Print drivers which are probably already on your computer.
These drivers may not give you all the capabilities that you would have if Xerox updated their USB plug-in, but they should allow you to print. I see nothing in the literature that suggests that you cannot use the PostScript via USB. That is the default/stock interface for the printer.
Matt
Mac Mini G4; B&W G3/300

Deafult Printer won't "stick" XEROX Phaser 7760GX

When I set the XEROX Phaser 7760GX IP networked printer as default in system settings, it has reverted to "last used" next time I i look. I have downloaded and installed new printdriver since upgrading to Leopard and it prints fine but won't stick.
It might be the same problem but in the Adobe CS3 InDesign Print Presets [Deafult] I'm unable to select the Default Printer (Greyed out)

I have another idea on how to use the old driver. NO guarantees.
For all who may be reading this -- this is for Yosemite -- it reduces security by relaxing sandboxing. It is a workaround, not a permanent fix.
Use the Terminal utility to run the two commands below -
sudo sh -c 'echo "Sandboxing Relaxed" >> /etc/cups/cups-files.conf'
sudo launchctl stop org.cups.cupsd
(sudo means superuser do - this is your admin user on OS X. It asks for your password - but it hides it from you when you type - for security)

Can I use Airport Express for printing and Ethernet printing at same time?

I've been trying to set up a couple of laser printers that were given to me recently. The printers are Apple LaserWriter 16/600 PS and Samsung CLP-510. The reason I'd like to have both up and running is because the black toner for the Samsung costs twice as much as the toner for the LaserWriter. I have two questions that I am hoping someone will be able to answer.
1) The CLP prints a test page just fine. I was finally able to get the Samsung printing while directly connected to my PowerBook G4 via usb (I had to install a Xerox Phaser 6100 driver to do so!). Today I tried putting the usb into my Airport Express (which I use for my portable internet and airtunes) and now the printer does not respond. When I try to add the CLP as a bonjour printer, I get an error adding the printer and the printer does not respond. Can someone offer some advice as to how and if the CLP may work via the Airport Express?
2) The LaserWriter prints a test page just fine. I purchased a transceiver (albeit not an Apple transceiver - this one says Asante Friendlynet, the guy I bought it from said it would work though). The transceiver is connected to the Ethernet port on the printer - and I have a yellow ethernet cable (?) running from the transceiver to the ethernet port on my computer. I read somewhere on the internet that I need to turn on Appletalk in order to use the printer via ethernet but when I went into my network settings to do that, there was a warning that I could not turn on appletalk for ethernet without forsaking my airport. Can someone offer some advice as to how and if the 16/600 PS may work via ethernet without disrupting my (working) airport express? Also - I did not receive any software or drivers with this printer but I read that I may not need to (they come with Tiger - ?) Is anyone able to confirm this?
Any help would be TOTALLY appreciated!
Leigh-Ann

Hello Kappy! Thank you for taking the time to reply to my question.
I should update you at this point to say that I can add the 16/600 PS printer through a process that I found called 'Direct IP printing over ethernet'. (I think I've done this correctly - but I honestly have no idea about network stuff). Here's what I did:
-went into system prefs and looked at the network settings under built-in ethernet tab. Under TCP-IP I found the IP address of my network host.
-In the Printer Setup Utility I tried to manually add the 16/600 PS printer. In the Printer Browser window, I selected IP Printer.
-Under IP printer, I selected LPD Protocol. I inserted the IP address copied from my network settings (above) in the address bar. In the Queue bar I typed in the name of the printer 'Apple LaserWriter 16/600 PS'.
-Again in the Printer Browser box I gave the printer a name and location. Finally, in the 'print using' box I selected Apple and then chose the model from the drop down list. 'Apple LaserWriter 16/600 PS fax v.2014.016'
-I got a dialogue box that asked about other installable features - clicked ok.
-when I tried to print a Word document, the Apple LaserWriter driver opened up and appeared in my dock and then I got an immediate error saying "network host ---.---.--.--- is busy, down, or unreachable..."
-I tried to repair permissions, but it did not resolve my issue.
-I noticed that even after adding the 16/600, it did not show up as a bonjour printer, but remained visible as a printer in my list (although grayed out).
I did some troubleshooting and the best I could find as a close match for my problem was that perhaps I had entered the name incorrectly in the Queue box...? If anyone knows how to find the appropriate name to insert I would sure appreciate knowing.
Finally - you should probably know that I received this printer from someone else. I guess I'm wondering if I need to be resetting network settings on the printer somehow? The test page lists the following:
Ethernet (Address: 08:00:07:84:78:e9)
EtherTalk: PostScript
NetWare: AutoSelect
TCP/IP: AutoSelect
IP address: 0.0.0.0
And - now finally, to answer your questions (the best I can, that is)
I did connect the yellow network cable directly into my laptop (right side, 4th input, counting away from me). I have a portable internet modem that plugs into my wall (for power) and then has a cable (Ethernet?) that goes into my Airport Express (LAN port?). I have no other router and there are no other inputs or outputs on my modem. My Airport Express has only one input for the modem, one mini input for airtunes, and one usb input (in which I have a cable connecting to my other laser printer (now working wirelessly via Airport Express!!)
Should I have these cables hooked up differently?
What is a Phonenet adaptor? My internet is provided via a cable service (not DSL). It is wireless and portable - I can take it to any major city in Canada and it works as long as it is plugged into a power source and near a window.
I really appreciate any help you can offer. At this point I must have spent the better part of almost two weeks trying to get these older laser printers up and running.
Thank you again.
Leigh-Ann

Can no longer print to ethernet printer on Airport Extreme network

I have a Mac/Windows home network with two airport extreme base stations. One is connected to my dsl modem. The other is used wirelessly to extend the network, and I have a Xerox Phaser 5500 connected to one of its lan ports. Until recently, all computers, connected wirelessly could share the internet connection and print to the Phaser. Due to a power failure, I have to reset both the Airport base stations, and now I can not print from any of the computers.
The print monitor says the network host is busy, but the IP address it gives for the printer is the same assigned to my MacBook.
Any help would be greatly appreciated.

There are some differences in sharing but it will work. I have a G4 that I use as a server, too.
First, tell me what printer model. There are driver differences, too.
At the heart, CUPS (the print control subsystem) uses IPP as the print sharing protocol. That part hasn't changed. So I recommend, for troubleshooting, setting up the printer on the client using IP printer > IPP protocol.
Here's a guide:
1) On the 10.5 print server, use a browser and point it at the CUPS admin web page athttp://localhost:631
Go to Printers list and find the queue name from the left side of the page next to the printer you want. Also note the IP address of the server Mac.
2) On a client, Add the printer as an IP printer > IPP protocol, and enter the IP address and queue name you noted above.
3) Select the generic postscript driver (on client Mac)
(after reading your second post, I want to remind you to set the server to use the correct driver.)
Finish and try it.

This.print(pp) with interactive type silent or automatic does not work after upgrade acrobat reader 9 to acrobat reader 11

After an upgrade of acrobat reader 9 to acrobat reader 11 the automatic printing of a pdf. The pdf is opened, but the print does not happen. With acrobat reader 9 it works. But with acrobat reader 11 the printing does not happen.
I discovered when you specify pp.constants.interactionLevel.full it works on acrobat reader 11. But when you specify pp.constants.interactionLevel.silent or pp.constants.interactionLevel.automatic it does not work on acrobat reader 11. But with the full option we have a dialog print box
we do not want.
In our jsp we load a pdf document and create a message handler to detect the print events of a pdf document that is in an <object> tag.
In the pdf document we add
package be.post.lpo.util;
import org.apache.commons.lang.StringEscapeUtils;
import org.apache.commons.lang.StringUtils;
public class AcrobatJavascriptUtil {
    public String getPostMessageToHostContainer(String messageName, String messageBody){
        return "var aMessage=['"+messageName+ "', '"+ messageBody+"'];this.hostContainer.postMessage(aMessage);";
    public String getAutoPrintJavaScript(String interactiveType, String printerName,String duplexType) {
        String interactiveTypeCommand = "";
        if (StringUtils.isNotBlank(interactiveType)){
            interactiveTypeCommand = "pp.interactive = " + interactiveType + ";";
        String duplexTypeCommand = "";
        if (StringUtils.isNotBlank(duplexType)){
            duplexTypeCommand = "pp.DuplexType = " + duplexType + ";";
        return "" + // //
                "var pp = this.getPrintParams();" + // //
                // Nointeraction at all dialog, progress, cancel) //
                interactiveTypeCommand + //
                // Always print to a printer (not to a file) //
                "pp.printerName = \"" + StringEscapeUtils.escapeJavaScript(printerName) + "\";" + //
                // Never print to a file. //
                "pp.fileName = \"\";" + //
                // Print images using 600 DPI. This option MUST be set or some barcodes cannot //
                // be scanned anymore. //
                "pp.bitmapDPI = 600;" + //
                // Do not perform any page scaling //
                "pp.pageHandling = pp.constants.handling.none;" + //
                // Always print all pages //
                "pp.pageSubset = pp.constants.subsets.all;" + //
                // Do not autocenter //
                "pp.flags |= pp.constants.flagValues.suppressCenter;" + //
                // Do not autorotate //
                "pp.flags |= pp.constants.flagValues.suppressRotate;" + //
                // Disable setPageSize i.e. do not choose paper tray by PDF page size //
                "pp.flags &= ~pp.constants.flagValues.setPageSize;" + //
                // Emit the document contents. Document comments are not printed //
                "pp.printContent = pp.constants.printContents.doc;" + //
                // printing duplex mode to simplex, duplex long edge, or duplex short edge feed //
                duplexTypeCommand +
                // Print pages in the normal order. //
                "pp.reversePages = false;" + //
                // Do the actual printing //
                "this.print(pp);";
snippets for java code that adds
package be.post.lpo.util;
import org.apache.commons.lang.StringUtils;
import com.lowagie.text.Document;
import com.lowagie.text.DocumentException;
import com.lowagie.text.pdf.PdfAction;
import com.lowagie.text.pdf.PdfDestination;
import com.lowagie.text.pdf.PdfImportedPage;
import com.lowagie.text.pdf.PdfName;
import com.lowagie.text.pdf.PdfReader;
import com.lowagie.text.pdf.PdfWriter;
import java.io.IOException;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.ArrayList;
import java.util.Iterator;
import java.util.List;
public class PdfMergerUtil{
    private static final PdfName DID_PRINT = PdfName.DP;
    private static final PdfName WILL_PRINT = PdfName.WP;
    private List<PdfActionJavaScriptHolder> actionJavaScripts = new ArrayList<PdfActionJavaScriptHolder>();
    private class PdfActionJavaScriptHolder{
        private final PdfName actionType;
        private final String javaScript;
        public PdfActionJavaScriptHolder(PdfName actionType, String javaScript) {
            super();
            this.actionType = actionType;
            this.javaScript = javaScript;
        public PdfName getActionType(){
            return this.actionType;
        public String getJavaScript(){
            return this.javaScript;
    public void writePdfs(OutputStream outputStream, List<InputStream> documents, String documentLevelJavaScript) throws Exception {
        Document document = new Document();
        try {
          // Create a writer for the outputstream
          PdfWriter writer = PdfWriter.getInstance(document, outputStream);
          document.open();
          // Create Readers for the pdfs.
          Iterator<PdfReader> iteratorPDFReader = getPdfReaders(documents.iterator());
          writePdfReaders(document, writer, iteratorPDFReader);
          if (StringUtils.isNotBlank(documentLevelJavaScript)){
              writer.addJavaScript(documentLevelJavaScript);
          addAdditionalActions(writer);
          outputStream.flush();
        } catch (Exception e) {
            e.printStackTrace();
            throw e;
        } finally {
            if (document.isOpen()){
                document.close();
            try {
                if (outputStream != null){
                    outputStream.close();
            } catch (IOException ioe) {
                ioe.printStackTrace();
                throw ioe;
    public void addAdditionalDidPrintAction(String javaScript){
        actionJavaScripts.add(new PdfActionJavaScriptHolder(DID_PRINT, javaScript));
    public void addAdditionalWillPrintAction(String javaScript){
        actionJavaScripts.add(new PdfActionJavaScriptHolder(WILL_PRINT, javaScript));
    private void writePdfReaders(Document document, PdfWriter writer,
            Iterator<PdfReader> iteratorPDFReader) {
        int pageOfCurrentReaderPDF = 0;
          // Loop through the PDF files and add to the output.
          while (iteratorPDFReader.hasNext()) {
            PdfReader pdfReader = iteratorPDFReader.next();
            // Create a new page in the target for each source page.
            while (pageOfCurrentReaderPDF < pdfReader.getNumberOfPages()) {
              document.newPage();
              pageOfCurrentReaderPDF++;
              PdfImportedPage page = writer.getImportedPage(pdfReader, pageOfCurrentReaderPDF);
              writer.getDirectContent().addTemplate(page, 0, 0);
            pageOfCurrentReaderPDF = 0;
    private void addAdditionalActions(PdfWriter writer) throws DocumentException{
        if (actionJavaScripts.size() != 0 ){
            PdfAction action = PdfAction.gotoLocalPage(1, new PdfDestination(PdfDestination.FIT), writer);
            writer.setOpenAction(action);
            for (PdfActionJavaScriptHolder pdfAction : actionJavaScripts ){
                if (StringUtils.isNotBlank(pdfAction.getJavaScript())){
                    action = PdfAction.javaScript(pdfAction.getJavaScript(), writer);
                    writer.setAdditionalAction(pdfAction.getActionType(), action);
    private Iterator<PdfReader> getPdfReaders(Iterator<InputStream> iteratorPDFs) throws IOException {
        List<PdfReader> readers = new ArrayList<PdfReader>();
          while (iteratorPDFs.hasNext()) {
            InputStream pdf = iteratorPDFs.next();
            PdfReader pdfReader = new PdfReader(pdf);
            readers.add(pdfReader);
        return readers.iterator();
JSP code
<script type="text/javascript" src="<bean:message key="scripts.js.internal.jquery" bundle="app"/>"></script>
    <script language="javascript">
    function goToDidPrintUrl(){
        var url = "<%=didPrintUrl%>";
        window.location.assign(url);
    function createMessageHandler() {
        var PDFObject = document.getElementById("myPdf");
        PDFObject.messageHandler = {
            onMessage: function(msg) {
                 if (msg[0] == "WILL_PRINT"){
                    $("#printingTransitFeedBackMessage").text('<%=willPrintMessage%>');
                 if(msg[0] == "DID_PRINT"){
                    $("#printingTransitFeedBackMessage").text('<%=didPrintMessage%>');
                    setTimeout('goToDidPrintUrl()',4000);
            onError: function(error, msg) {
                alert(error.message);
    </script>
</head>
<body onLoad="createMessageHandler();">
<div id="printingTransitFeedbackArea">
<div class="info" id="printingTransitFeedBackMessage"><%=documentOpenMessage%></div>
</div>
<object id="myPdf" type="application/pdf" width="100%" height="100%" data="<%=toBePrintedUrl%>">
</object>
</body>

From the JS API Reference of the print method:
Non-interactive printing can only be executed during batch, console, and menu
events.
Outside of batch, console, and menu events, the values of bUI and of interactive are ignored
and a print dialog box will always be presented.

The USB ethernet adapter for the macbook air is not working. Cable unplugged. How can I fix this for the recent patch 10.7.2?

I have recently purchased an ethernet usb adapter for the MBA and after a month it is not working. Says cable unplugged.
Now I have tried it with 2 other connections on other computers that are working and still no response. Many reviews or fixes online mention something with a 10.5.5 patch that seems quite outdated and do not work. Anyone figure out how to fix this or do I have a broken adapter?

I've used Apple's adaptor on a mini MBA without a problem.

Have 2006 MacBook Pro with wireless KB. Some of keys (caps lock, tab) are not working. How do I fix this?, Have 2006 MacBook Pro with wireless KB. Some of keys (caps lock, tab) are not working. How do I fix this?

Have a 2006 MacBook Pro with wireless mouse and Keyboard. Some of keys (caps lock, tab) on KB do not work any longer. I attempted to replace wireless KB with wired KB, but could not find one that was compatible with Snowleopard (10.6.8) OS. Would like to replace KB with either another wireless KB or wired KB.
However, in view of the scarcity of the above items, it appears I might serve myself better by fixing my current KB. Any suggestions?
Thanks!

Hello Jimbo5451,
Thank you for using Apple Support Communities.
For more information, take a look at:
Troubleshooting wireless mouse and keyboard issues
http://support.apple.com/kb/ts3048
Have a nice day,
Mario

My Macbook Pro doesnt seem to connect to my Belkin wireless router. It is connected but the internet would not work. any suggestions?

hey guys. I am having trouble with my internet. My MacBook Pro seems to be connected with Belkin wireless router, but the internet would not work. We recently changed the router so its pretty new, and it used to work on my HP laptop. Although there were some problems, it still worked. But now, the internet works and stops suddenly, and then works again.
I would love to hear some suggestions to get rid of this.
Thanks
Kiran

If you have not already done so, read the troubleshooting section in Belkin's user manual, contact their customer tech support by phone or go to its website. Please detail all you have done to resolve your issue. Need this information so that the users can avoid the "been there, done that" scenario type responses. This is to avoid repeating the troubleshooting you may have already tried. Thank you.

How to use AE for wireless printing with Ethernet Printer?

Hi all,
I have been using my AE connected to a printer via USB for printing but have now replaced my printer with another model that only has Ethernet connections.
Can someone please explain how to set up the AE so that I can print? I can get so far but seem to be doing something wrong somewhere. Here's my setup:
Mix of Macs and PC's using Airport Time Capsule for wireless network. Currently setup as 'Create a Wireless Network'
1 x b/g Airport Express - now with Ethernet connection between AE and Printer. Currently connected as 'Join a Wireless Network'
Via 'Add Printer' I have selected 'Internet Printing Protocol - IPP' as the Protocol and added the IP address of the Airport Express '10.0.1.10' as the Address. This seems to connect OK but all I get is printer paused.
Any idea where I am going wrong please?
Many thanks, Mike

Sorry you are having difficulties.
Suggest that you first get the printer working with your AirPort Extreme in case the configuration on the Express may not be quite right.
I'm not familiar with the Epson products, but I do use an HP ethernet all-in-one device.
The basic "must do's" on the device include entering the printers MAC address and assigning a fixed IP address that the printer will always will receive using a DHCP Reservation on the AirPort Extreme. My all-in-one gets 10.0.1.25 It sounds like you may have done this.
After installing the printer software from the disc, you go into the Mac's System Preferencesj > Print and Fax and click the small + (plus) button at the bottom of the printer list. The HP printer appeared immediately as an available printer, so click it to highlight it and then click Add at the lower right. It's been flawless since it was installed about 3 months ago.
You'll need to Add the device for each Mac computer on the network. I don't use PC's but imagine that Add Printer or Add New Device would be the way to go here.
Sometimes it helps to call the manufacturer and endure the hold for 15-20 minutes waiting for the manufacturer's tech support people.

Wireless Printing to ETHERNET Printer Xerox Phaser 6180 via AE not working

Similar Messages

Maybe you are looking for