Wireless printing via airport express

Ive encountered a problem when it comes to printing over my home wireless network. The network consists of a single airport express base station connected via ethernet to my modem and broadcasting a wireless signal for both a macbook and a acer laptop to access the internet, which works just fine.
I also have a HP deskjet multifunction printer connected to the base station via the usb port, witch also shows up in the airport utility as being connected to the router. I'm aware that the scan function will only work when its directly connected to the computer, but as for printing, Ive set up the printer using bonjour for windows on the acer laptop, and that machine is able to print via the base station with no troubles at all.
Here is the problem. I'm able to add the printer to the list of printers on the macbook using the correct driver, and it says under location that its connected to the airport express, but when I go to print (a test page, etc) the document wont print. i get the following message - "Unable to read response header - short read" and it just hangs in line until I cancel the job. Ive tried the options on the apple troubleshooting guide, removing and adding the printer, restarting the base station and the multifunction, etc, but still no result. any ideas?

you might find pointers in the _*Printer Troubleshooting Guide*_.
JGG

Similar Messages

Can we print with a non-wifi printer via Airport Express?

Is it possible to print with non-wifi printer via Airport Express?

Read through this previous thread for answers: https://discussions.apple.com/message/21994667#21994667

MacBook trying to connect wireless printer via A Express

Am trying to connect my macbook with an existing linksys network to a wireless printer via an Apple Express.
The computer seems to reconize the Apple Express but, in following the instructions to use the Printer Setup Utility to get the computer to recognize the connection, when I designate my printer I get and error message......." An error occurred while trying to add the selected printer Error -9672"
Does anyone know a cure or, at least, where to research "error 9672" ??

Open Macintosh HD > Applications > Utilities > AirPort Utility
Click on the Time Capsule icon, then click on Edit in the small window
Click the Base Station menu at the uppermost top of the computer screen up where the Help, File, Window, etc menus appear
Click Show Passwords

HP printer not printing via Airport Express

I have a HP DeskJet D2330 printer that I am trying to use via Airport Express. The issue is that while the printer is detected in the Airport Utility, and is detected in System Preferences as a Bonjour printer, I can't print to it. Documents sent to the printer appear in the queue and then disappear but no pages come out of the printer.

Hi - similar problem. Mine talked a little (test page would print about ~1 inch then grind to halt). No luck with escalated apple network tech. Problem (apple sez) is with HP. HP is quiet but has list of printers "likely" to work with Airport Extreme , but dated (indicates rendezvous with extreme vice bonjour). FYI, my printer works fine when USB direct to mac. Also Works fine from Mac or PC as ethernet-connected printer on home network (with Linksys/N Giga router) as network printer (also sets up as "bonjour" printer for what that is worth). Also problem exists with imac connected to Airport extreme via wireless or wired. So...problem seems to be pretty specific to talking via airport extreme USB. Havent tried to use ethernet yet, but need the slot for other equip.
Anyone else having any luck?
Also anyone have proven good printer hookup? I need photo quality printer.
mpw

Epson Aculaser CX11NF printing via Airport Express

Well today has been an interesting day...
Connected printer to airport express usb port - had problems printing via this in the past but since I'd moved the printer so I could plug it into the usb port on a computer and then share it that way I thought I'd give it another go.
Macbook 10.5.2 prints perfectly first time
Powerbook 10.4.11 can see it and connect but won't print
Toshiba XP laptop) can't see it
Check out the net, try out the info I find and hey presto! Toshiba XP laptop sees and prints perfectly
Share printer via Markbook and Markintosh and Powerbook prints fine but still won't print directly via airport express.
Feels wrong that an xp book can print via an apple airport express easier than an apple laptop...
Anyone have any thoughts?

Hi,
Thanks for all your replies. I tried repairs pewrmissions in disk utility again and got slightly excited when printer utility automatically selected a generic post script driver but my printer just printed jibberish.
I've just run repair permission in pinter setup repair and this is my log:
The file /System/Library/StartupItems/PrintingServices/PrintingServices is missing!
The file /private/etc/cups/classes.conf is missing. This file is deleted when using the Reset Printing System option.
The file /private/etc/cups/ppds.dat is missing. This file is deleted when using the Reset Printing System option.
The permissions for the file /usr/libexec/cups/filter/rastertodymo are incorrect!
They are lrwxr-xr-x, but should be -rwxr-xr-x
Repaired.
Recreating symbolic links...
Done.
Verification complete.
2075 files examined. 1 problem was found and repaired. It is recommended that you verify the permissions again to make sure the values are correct.
3 missing files/directories found during the verification process. They may be responsible for certain printing problems. Printer Setup Repair cannot replace these items. Please refer to the log file for a list of the missing files/directories. You may need to reinstall OS X to resolve your printing issues. Certain files and directories are deleted when using the Reset Printing System option. These files and directories, if required, will be recreated during normal printing.
Does it mean anything to anyone?

Printing via Airport Express does not Work

I have been using an Airport Express Basestation with my Mac Mini and Epson Stylus 880 for about a year without a problem. Now I have moved to an Intel iMac and cannot print via Airport anymore. The file get´s spooled but then I get an error message saying that the printer driver might be incompatible. If I use the same driver with the local USB port everythings works fine.
Please help,
Ingo

Ingo,
try this link:
<http://discussions.apple.com/message.jspa?messageID=1674987#1674987>
Deivy

Wireless Speakers via Airport Express

I have two sets of powered speakers which I play my music from iTunes via Airport Express units. My issue is after months of excellent sound and no problems, it appears I am now losing connection to the speakers which means the music stops and starts, VERY frustrating....! The internet connection via the Airport Express units is not a problem, just the music.
Has anyone had similar problems and is there an answer...??????

Check out this article:
http://www.macfixit.com/article.php?story=20070322005336248
I don't know if it's good or anything, but it looks like the info you want.

Wireless printer and airport express

I have an HP officejet 7410 "all in one" printer that use to connect to my Imac wirelessly just fine but now I have to connect it to the usb cable to get it to print. my family has 4 mac bookpro's also and its hit or miss whether or not they will print so would it be best for me to shut everything off, connect an airport express to my modem and then restart everything? I'm just tired of fooling with it and know there must be a better way? Thanks!

You can connect your printer via USB to the USB port on an AirPort Express or Extreme and share them throughout your network.
Instructions can be found here.
http://manuals.info.apple.com/en_US/AirPort_Express_SetupGuide_5.1.pdf

Wireless Printing w/ Airport Express and HP Printer

I'm running Snow Leopard. Connected my HP 4280 Printer via USB to Airport Express. Presto! Instant wireless printing. Then 3 days later, without changing any settings, I now get "Printer is Offline" message.
I've tried dumping printer driver, and reinstalling new driver downloaded from HP. No luck.
I went to Airport Set Up Utility > Printer > Manual Set Up, and there is no printer listed.
Thanks in advance for any ideas to help me!

I got in touch with HP through their website. They sent me an email with step-by-step instructions. Here they are. Problem solved!
From HP:
Cause for the issue:
This issue may occur due to device or network conflicts.
Resolution:
Before we proceed with troubleshooting this issue, please confirm if the latest printer software (Mac os x 10.6 compatible) is installed on your Mac and the Mac is able to communicate wireless with the router.
If yes then continue with the following steps,
Step 1: Reset the Print System
1. Click on Apple icon
2. Select System Preferences
3. Click on Print and Fax
4. Click on the printer on the left side
5. Press the Ctrl key + click on Your printer icon
6. You will get an option to choose Reset Print system.
7. Click on Reset Print System. This will reset the print system.
Step 2: Repair Disk Permissions
1. On your Mac, click on Go menu from the finder menu bar at the top
2. Select Utilities tab
3. Click on Disk utility
4. Once the disk utility pops up, select the hard drive and click on Verify Permissions tab.
5. This may take some time to complete as the Mac will try to verify all the permissions for the hard drive.
6. Once the Verify Disk Permission is complete, restart the mac.
7. Follow steps 1 – 4.
8. In the 4th step select Repair Disk Permissions. Once the repair disk permissions is complete,
9. Restart the Mac.
Step 3: Re-add the Printer
1. Click on Apple icon
2. Select System Preferences
3. Click on Print and Fax
4. Click on the + sign to add the Printer
5. Select your printer next to which says Bonjour.
6. Click on Add.
Try Printing.

Cannot print via airport express - mac novice

I have an ibook g4 running tiger 10.4.2 OS. i recently got an airport express which i connected to my cable modem and an HP PSC 1350 printer. beautiful!..however, i subsequently connected my stereo and can no longer print to that printer. when a job is sent to the printer the status icon pops up on the dock, but eventually i get the dreaded red exclamation point and a 'job stopped' message when i view the printer status. the printer works when connected directly to my ibook. i ve tried everything i can think of--resetting the base station, changing security types, deleting/re-adding the printer, using different drivers, , disconnecting the stereo, even 2 hours with applecare after which they told me 'sorry dude'. i checked the unofficial list of printers that are compatible with airport express and the hp 1350 is on there. can anyone help? this is my first mac and everything has been GREAT so far except this issue. i just cant figure this one out..

Thomas I did find this on HP's Web site. But beside this you may want to look for other (GIMP printer drivers that may accomodate the wireless compatibility).. HP does state:
Is my All-in-One product supported via the Rendezvous/Bonjour protocol?
NOTE: Bonjour is the new protocol for Mac OS X v10.4.
ANSWER:
HP does not offer support for any All-in-One product via Rendezvous/Bonjour, however some products might work when plugged into an Airport Basestation via USB. These products might work with the print functionality only. See the list below for such products.
PSC 1100 series
PSC 1200 series
PSC 1310 series
PSC 1350 series
PSC 1600 series
PSC 1400 series
PSC 1500 series
PSC 2100 series
PSC 2170 series
PSC 2200 series
PSC 2300 series
PSC 2400 series
PSC 2500 series*
PSC 2600 series*
PSC 2700 series*
Officejet 4100 series
Officejet 4200 series
Officejet 5500 series
Officejet 6100 series
Officejet 6200 series
Officejet 7200 series*
Officejet 7300 series*
Officejet 7400 series*
LaserJet 1220
LaserJet 3200m
LaserJet 3030
LaserJet 3300 series
NOTE: Printers marked with an * have built-in networking allowing them to connect to an Airport via either Ethernet or 802.11b wireless without the need for a USB connection. These products also have full functionality when connected via one of these connection types.

Cannot print via AirPort Express

I bought Airport Express a few days ago and have connected the ethernet cable and have wi-fi running. However I cannot print wirelessly (the printer is connected to AirPort Express via USB) and everytime I try it fails to locate the printer. This is because the settings are old (I used to hav my iMac as a base station but now the printer is not connected to the iMac and is now connected to AirPort Express). Could somebody tell me how I can fix this problem.
Thank you in advance

Thomas I did find this on HP's Web site. But beside this you may want to look for other (GIMP printer drivers that may accomodate the wireless compatibility).. HP does state:
Is my All-in-One product supported via the Rendezvous/Bonjour protocol?
NOTE: Bonjour is the new protocol for Mac OS X v10.4.
ANSWER:
HP does not offer support for any All-in-One product via Rendezvous/Bonjour, however some products might work when plugged into an Airport Basestation via USB. These products might work with the print functionality only. See the list below for such products.
PSC 1100 series
PSC 1200 series
PSC 1310 series
PSC 1350 series
PSC 1600 series
PSC 1400 series
PSC 1500 series
PSC 2100 series
PSC 2170 series
PSC 2200 series
PSC 2300 series
PSC 2400 series
PSC 2500 series*
PSC 2600 series*
PSC 2700 series*
Officejet 4100 series
Officejet 4200 series
Officejet 5500 series
Officejet 6100 series
Officejet 6200 series
Officejet 7200 series*
Officejet 7300 series*
Officejet 7400 series*
LaserJet 1220
LaserJet 3200m
LaserJet 3030
LaserJet 3300 series
NOTE: Printers marked with an * have built-in networking allowing them to connect to an Airport via either Ethernet or 802.11b wireless without the need for a USB connection. These products also have full functionality when connected via one of these connection types.

Wireless printing through Airport Express stops after a few pages

I have a Canon MP780, which I tried hooking up to my Airport Express USB. Installation seemed to work smoothly with the Airport Utility, and it printed a test page just fine. However, when I printed a longer document, something kacked after a few pages (a communications error).
Hooking it up is a hassle (have to go through a wall to get to the AE/DSL modem setup), and I ripped it apart after upgrading the canon drivers to no avail. I'll try it again to get the exact error messages if there's more than a snowballs chance in hades that this might work, but thought I'd at least find out if it's hopeless or not before throwing more time at this.
Any help's appreciated... many thanks.

There has been similar posts on this forum regarding wireless stability. A few have indicated that there printing was fine until the recent Airport Client Update 2009-002. If you check your System Prefs > Software Update > Installed Software list, have you also run this update?
Pahu

HP Laserjet 1010 & Wireless printing via Airport USB - Not working in SL

Hi There,
After just upgrading to Snow Leopard on my MacBook I tried printing wirelessly to my HP Printer, but no luck!
Printer: HP Laserjet 1010
Connected via: Airport with USB cable
Snow Leopard recognises the printer and is fine to print when the printer is connected directly to the MacBook via USB cable, but:
When I set up wireless printing, it finds the printer (via Bonjour) but simply will not print. The print monitor gets to 24% or so of the file processed and then just stops & fails.
Everything was fine under 10.5 Leopard. It seems it should work, but no printing occurs! Any ideas?
Many thanks,
Paul

I had a similar-sounding problem with my HP1012.
The fix:
a. power-cycled the Airport Extreme.
b. Updated firmware.
c. Select Print in an application.
For an extended discussion of what I did see here - some of this may help:
http://discussions.apple.com/thread.jspa?threadID=2142906&tstart=60
Actually, at this point I have two printers connected: Airport Extreme ->USB powered hub ->2 printers. One is the HP1012, the other is an HP 4300 series inkjet. Took sometime to get it right, the first hub I tried apparently was not powered enough. In that vein, one earlier thread (a response to one of my posts) pointed out the possibility that the AE -> printer USB connection might not be adequately powered, and to try using an intermediate hub. Assuming your AE is performing properly in all other respects, don't rule out a cable or other printer connection issue even if the setup was working properly before.
stan

How to setup wireless printing with AirPort Express?

Hey, I just bought a AirPort Express today and I can't figure out how to setup the usb wireless printing. Could someone explain in detail on how to do this? Thanks-Michael
I have a Windows 7 64-bit PC and a Hp Deskjet F380 USB printer.

Download the install Bonjour Print Services for Windows v2.0.2
Run the program. Hopefully, your printer will be recognized.
If it is, "install" the printer and try to print.
Keep in mind that if you have an All-in-One type of device, that only the print function will be supported.
Advanced features like copy, scan, maintenance, etc are not supported. You will need to connect the All-in-One directly to your PC if you need those services.

Slow wireless printing with Airport Express

I have a Canon MP530 printer hooked up to an Airport Express for wireless printing. My wireless internet network is through an Airport Extreme. The only thing hooked into the Express is the printer, and it works but is extremely slow. It can take an hour to print one 15 page document. Any ideas how to fix this?

I'm not sure I understand your question, or at least I don't know how to tell connection speed with the utility. The express is set up as an extension to my current wireless network, although I'm only using it for printing.
I had a similar experience with a hard drive wirelessly connected to the Extreme - data transfer was ridiculously slow. Is this something to be expected with wireless connectivity?

Wireless printing via airport express

Similar Messages

Maybe you are looking for