Wireless printing with airport express/extreme?

i'm trying to figure out how to use either an express or an extreme (I have both) as a wireless print network of sorts. In the past I hooked up my modem to the extreme along with my printers, and was able to connect wirelessly to my computer; thus, wireless printing. i have since changed to google fiber (including that just in case that's part of the issue), and my modem/router is on a different level of the house than the rest of my computer setup, and i don't think it can be moved. All the solutions i've found require a computer to be directly connected to the modem/express for the initial setup, which isn't possible in this case as i don't have a laptop, just a desktop. Any suggestions would be much appreciated!

It helps if you use specifics.
Are you talking about a USB printer?
What is the google modem router??
How and where do you hope to place the airport and printer? ie will it be plugged into the main router by ethernet?
There is no problems doing the setup over wireless.. as long as wireless reaches the computer. There is also no problem manually setting up the airport router in total isolation from the network.. once setup you can place it back into the network.
Typical method of manual backup.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

Similar Messages

Slow wireless printing with Airport Express

I have a Canon MP530 printer hooked up to an Airport Express for wireless printing. My wireless internet network is through an Airport Extreme. The only thing hooked into the Express is the printer, and it works but is extremely slow. It can take an hour to print one 15 page document. Any ideas how to fix this?

I'm not sure I understand your question, or at least I don't know how to tell connection speed with the utility. The express is set up as an extension to my current wireless network, although I'm only using it for printing.
I had a similar experience with a hard drive wirelessly connected to the Extreme - data transfer was ridiculously slow. Is this something to be expected with wireless connectivity?

How to setup wireless printing with AirPort Express?

Hey, I just bought a AirPort Express today and I can't figure out how to setup the usb wireless printing. Could someone explain in detail on how to do this? Thanks-Michael
I have a Windows 7 64-bit PC and a Hp Deskjet F380 USB printer.

Download the install Bonjour Print Services for Windows v2.0.2
Run the program. Hopefully, your printer will be recognized.
If it is, "install" the printer and try to print.
Keep in mind that if you have an All-in-One type of device, that only the print function will be supported.
Advanced features like copy, scan, maintenance, etc are not supported. You will need to connect the All-in-One directly to your PC if you need those services.

Wireless Printing with AirPort Express

Hi all, I've had an AirPort Express on my network for a while now and have been printing to a Canon LBP2900i laser printer without any problems.
It seems that since the last firmware upgrade for the AirPort Express was released and installed I receive the error message 'this port type is not supported by your printer' when trying to print.
It worked fine before so I can't figure out why it should be different now.
Any ideas?

I am using Airport Express with an Epson Photo R380 printer. When I use the Gutenprint 5.1.3 driver I get faded black type but I do have a connection to the printer and it prints.
When I use the Epson driver (and not Gutenprint as the Epson support page suggests not using it to solve the faded print problem) the printer shows up on the Airport Express but nothing happens when I send anything to it to print.
I've tried reloading the Epson driver etc - nothing seems to work.
Any suggestions on either how to get regular not faded printing using the Gutenprint driver or any connection at all using the Epson driver?

Wireless printing with Airport Express not working

I set up my Airport Express. I have an HP photojet printer and I can print from my Mac Air but the other 3 windows-based laptops that are connecting to Airport Express can't. Anyone know why that is or how to fix it?

You did install and run Bonjour for Windows on each PC, correct?
Does Bonjour "see" the printer...and it won't install....or.....does Bonjour not "see" the printer at all?
Just in case.....
Bonjour Print Services for Windows v2.0.2 - Support - Apple

How to print with a wireless printer with airport extreme

how to print with a wireless printer with airport extreme

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Extend wireless network with AirPort Express

How to extend the wireless network with AirPort Express and Belkin PlayMax as the primary router ?

How it work if I have an AirPor Station and 4 Airport Express, I actually also have an old TimeCapsule and an old AirPort Express. Can I cover all my house (around 300 m2). And will the old Airport slow down or convict with the new ones?

How make wireless connection with airport express to Yamaha Clavinova CVP-403 ?

I would like to wirelessly connect my Yamaha Clavinova CVP-403. I would like to use a D-link DWA 125 and my airport express. Does anyone has any experience on how to do that?

Hi Henry - you seem to be a very helpful and knowledgeable person and I am wanting to dive in to the depths of wireless working at home and could probably do with your advice. I certainly dont have as much knowledge as Jaybee and if hes had problems I am feeling a little apprehensive.
I know that the first thing I need to do is get an ethernet modem to use with Airport Express as I currently only have a USB modem. I was wondering if you have any recommendations or if I should go straight for the Netgear DSL modem/router (DG834B) that Jaybee ended up with. Although the bit about disabling the Airport Express resp. Extreme routers scares me rigid
I have looked at About this Mac and got the following for you hope its helpful.
OSX 10.3.9
1.33 HGz PowerPC G4 processor
Airport Extreme: Worldwide
Firmware: 400.17(3.90.34.0.p11)
Airport admin utility: 4.2 (v420.31)
My ISP is also Tiscali (UK) - they have said they can only provide modem support on the USB modem they provide so once I switch to an ethernet modem Ill be on my own. I have checked the Tiscali website and found the following modems, so I would assume (probably unwisely) that they would be compatible with my account...
Zoom X6 5590 DSL Modem (55907200)
D-Link DSL-300T
Zoom Hayes ADSL Ethernet (H0-15805) (081580572)
Any help is very gratefully received.
Regards,
... LIZ ...

HT4307 Works out-of-box with Airport Express Extreme, or not?

"With most Wi-Fi networks, Game Center will just work."
Does this mean that a Airport Express Extreme will work out of the box with Game Center? Or do I need to configure the firewall?

The HT4307 article you attached has a sentence that starts: "To use Game Center on a restricted Wi-Fi network, ..."
So it would make sense that whether you can use Airport Express Extreme (I believe it's either AirPort Express or AirPort Extreme, not both) out of the box would depend on your Wi-Fi environment.

Wireless Printing with Airport Extreme just stopped

Strangely, it is not working on one of my 3 computers only! Was working with all 3, today it would not print from my iMac with Intel 2.33 GHz.
No problem recognizing the printer. When I print the printer comes on, the printer head moves normally but a blank page comes out.
I have tried all the suggestions from Apple under the heading "Top Searches", subheading "Aiport Extreme/Express wireless printing" and I have also repaired disk permissions but nothing has changed.
Why would wireless printing work in an older computer and not a newer one? I have all the latest updates in BOTH the iMac and my Power Book so I can't blame a Security Update etc.
What now?
iMac Intel 2.33 GHz Mac OS X (10.4.10) Power Book G4, HP PSC 2410 All-in-one
iMac Intel 2.33 GHz Mac OS X (10.4.10) Power Book G4, HP PSC 2410 All-in-one

The exact problem for me. I also have checked all me settings, they seem to be
the way they should, but I can not get to print whatever.
I hope someone tell us what to do to make the printer work in an Airport
Extreme connection
PowerBook G4 Mac OS X (10.4.6) Airport Extreme Base Station and 2 Airport Express

I have installed Airport Extreme on my iMac, but want to extend the wireless network with Airport Express. Everything is fine until I try to select Extend the wireless network. I select Extend Wireless network but have no success. Ideas?

I have installed Airport Extreme on my iMac, but want to extend the wireless to rooms with a weak signal. The internet connection is fine with the basic setup. As soon as I go into Airport Utility to select Extend Wireless Network and fill in what I believe is proper information, I get an error message that Airport Extreme no longer has an IP address, the internet connection is broken, and under Wireless, that there is a wireless network in existence that can't be found. Rebooting the modem only brings the Airport Extreme back to the starting gate so that the internet is once again available. I assumed (naively) that with the All Mac All-the-Time context, adding Airport Express would truly be Plug and Play. I got the plug, but no play. I asked a Comcast technical specialist about it and he said that I needed to reset the Airport Express settings back to their default, factory status. I looked that process up online and found out that the way to do that was to hold down the reset button, then plug Airport Express into the socket and wait for the green light to flash four times. Then wait 45 seconds and the default settings will return. I did all that, only to find out that after the initial flash of green, green never appeared again. I got a fast flashing yellow light, followed by the light going off. Apparently this didn't reset it properly. So, after hours trying to get this system to work, I appeal to someone who can see through this mess and provide the key to success!
highFly376

Let's see if I can get this straight.
You have an Airport Extreme base station that is set to "Create a wireless network" and you have the box checked for "allow this network to be extended"....
Then you have an Airport Express that is set to "Extend a wireless network" which you selected the name of your network in the box...
Correct?
See this Apple document:
http://support.apple.com/kb/HT4259?viewlocale=en_US&locale=en_US
The wireless unit on the right of the diagram can be either of the newer Apple base stations.
Extreme, Express, Time Capsule

Expanding wireless network with Airport Express but without Airport Extreme

Hey guys,
I was wondering if I can expand my wireless network with my Airport Express without Airport Extreme base station. I have a Netgear wireless router. Is it possible? Can you give me tips on how to set it up?
Thanks a lot!
Marc

marcribeiro, Welcome to the discussion area!
No that is not possible. The Netgear is not compatible with Apple's WDS.

Wireless Printing with Airport Extreme?

I have a iMac(OS-X 10.3.9) and an Airport Extreme (white model) I wish to hook up my Epson USB printer to the Airport Extreme and use the Airport as a wireless printer router. It says I can now print from any Mac on my network using OS 10.2.3 or later. However, I have a windows XP (boo! Hiss! long story) on my network also. Can I use the Airport Extreme to print from my Windows wireless machine too and how do you set it up?
iMac Mac OS X (10.3.9)

Hi Moosewood
I don't think the folk in this forum know too much about windows. I suggest you post in the
Windows Compatibility forum, and i hope you get a better response. If not try the Airport forum.
good luck.
regards roam

Wireless printing with airport extreme and uverse modem

Hi,
I'm trying to hook up an airport express so that my PC Windows 7 and Mac Mini mid 2011 can print to both of my laser printers.
The dell is network attached and the oki is network attached as well as usb attached directly to the express.
Both systems see the printers but when i send a print job from the MAC it just errors out. If i send it from the pc like normal then it still works ok.
I also can't see either printer from my iPad 2 running iOS 5.0.1
Right now I'm running a UVerse 3800 router/modem and i have the airport express ethernet connected to one of the lan ports of the uverse router.
All printer drivers are current as well as the MAC software.
Help

The dell is network attached and the oki is network attached as well as usb attached directly to the express.
If both printers are Network-Ready, then there is no need to connect either to the AirPort Express Base Station (AX) by USB. Being Network-Ready, these printers have their own built-in print servers which should be controllable by their front-panel interface and/or via a web-based interface.
I also can't see either printer from my iPad 2 running iOS 5.0.1
Unless both printers are AirPrint-enabled, no iOS device will be able to print to them directly.

Wireless printer and airport express

I have an HP officejet 7410 "all in one" printer that use to connect to my Imac wirelessly just fine but now I have to connect it to the usb cable to get it to print. my family has 4 mac bookpro's also and its hit or miss whether or not they will print so would it be best for me to shut everything off, connect an airport express to my modem and then restart everything? I'm just tired of fooling with it and know there must be a better way? Thanks!

You can connect your printer via USB to the USB port on an AirPort Express or Extreme and share them throughout your network.
Instructions can be found here.
http://manuals.info.apple.com/en_US/AirPort_Express_SetupGuide_5.1.pdf

Wireless printing with airport express/extreme?

Similar Messages

Maybe you are looking for