Wireless Printing with Airport Extreme just stopped

Strangely, it is not working on one of my 3 computers only! Was working with all 3, today it would not print from my iMac with Intel 2.33 GHz.
No problem recognizing the printer. When I print the printer comes on, the printer head moves normally but a blank page comes out.
I have tried all the suggestions from Apple under the heading "Top Searches", subheading "Aiport Extreme/Express wireless printing" and I have also repaired disk permissions but nothing has changed.
Why would wireless printing work in an older computer and not a newer one? I have all the latest updates in BOTH the iMac and my Power Book so I can't blame a Security Update etc.
What now?
iMac Intel 2.33 GHz Mac OS X (10.4.10) Power Book G4, HP PSC 2410 All-in-one
iMac Intel 2.33 GHz Mac OS X (10.4.10) Power Book G4, HP PSC 2410 All-in-one

The exact problem for me. I also have checked all me settings, they seem to be
the way they should, but I can not get to print whatever.
I hope someone tell us what to do to make the printer work in an Airport
Extreme connection
PowerBook G4 Mac OS X (10.4.6) Airport Extreme Base Station and 2 Airport Express

Similar Messages

How to print with a wireless printer with airport extreme

how to print with a wireless printer with airport extreme

The problem is not the router.. the issue is the vpn has put your computer in a different IP range with a different gateway. When you turn off the vpn the computer returns to local lan and can print.
Some vpn software allows you to set gateway to use local net instead of remote gateway or access to other webistes or local lan.
Read up the issue.
http://stevejenkins.com/blog/2010/01/using-the-local-default-gateway-with-a-wind ows-vpn-connection/
Cisco vpn client..
https://supportforums.cisco.com/thread/239113
I did not search much.. just grabbed the first article I could find that explains the issue.
The whole point of the vpn is whilst it is connected your computer is NOT part of the Local Lan .. it is part of the Remote LAN via the vpn tunnel.
It is also a security risk using split tunnelling so often it will not be allowed.
Plug the printer directly into the computer via usb or whatever.. Local connection will work.. not local lan.

Wireless Printing with Airport Extreme?

I have a iMac(OS-X 10.3.9) and an Airport Extreme (white model) I wish to hook up my Epson USB printer to the Airport Extreme and use the Airport as a wireless printer router. It says I can now print from any Mac on my network using OS 10.2.3 or later. However, I have a windows XP (boo! Hiss! long story) on my network also. Can I use the Airport Extreme to print from my Windows wireless machine too and how do you set it up?
iMac Mac OS X (10.3.9)

Hi Moosewood
I don't think the folk in this forum know too much about windows. I suggest you post in the
Windows Compatibility forum, and i hope you get a better response. If not try the Airport forum.
good luck.
regards roam

Wireless printing with airport extreme and uverse modem

Hi,
I'm trying to hook up an airport express so that my PC Windows 7 and Mac Mini mid 2011 can print to both of my laser printers.
The dell is network attached and the oki is network attached as well as usb attached directly to the express.
Both systems see the printers but when i send a print job from the MAC it just errors out. If i send it from the pc like normal then it still works ok.
I also can't see either printer from my iPad 2 running iOS 5.0.1
Right now I'm running a UVerse 3800 router/modem and i have the airport express ethernet connected to one of the lan ports of the uverse router.
All printer drivers are current as well as the MAC software.
Help

The dell is network attached and the oki is network attached as well as usb attached directly to the express.
If both printers are Network-Ready, then there is no need to connect either to the AirPort Express Base Station (AX) by USB. Being Network-Ready, these printers have their own built-in print servers which should be controllable by their front-panel interface and/or via a web-based interface.
I also can't see either printer from my iPad 2 running iOS 5.0.1
Unless both printers are AirPrint-enabled, no iOS device will be able to print to them directly.

Real wireless printing with airport extreme

My D-link 615 router and Brother HL-3070CW work flwalessly for two years.
I decided to get an AEBS when D-link gave up. I thought I will be able to connect my printer to the AEBS as easily as I did with the D-link.
I have a sony desktop/windows 7. I cannot connect my printer via USB port. I need a way to wirelessly connect my printer to the AEBS.
My problem is that the printer cannot detect the wireless network after I installed the station. I tried to reinstall the printer but it did not work.
I really like the dvice, but I cannot keep it if I cannot connect the printer wirelessly to four computers. I do not have a wired netwrok.
Is there any way or link or instruction that can help me solve this issue. I apprecite your input and let me know if I need to add any missing details.

Anyone?

Can't print with Airport Extreme

I am having trouble printing with Airport Extreme.
My printer is connected to the AE but every time I try to print I get a printer offline message.
I have tried in the past to print wirelessly but have given up.
I just bought a new MacBook Pro so I thought I would give it another go.
Thank you.

Not very much to go on here but I'll give it a stab.
Go to the Airport Utility program located in Applications/Utilities folder.
Run this and select "manual setup" for your AE displayed on the left.
Hit the Printers icon on the top. Your shared printer should be displayed here. If it's not, then ensure it's powered on, good usb connection etc.
After this shows a usb printer connected then go to System Preferences>Print & Fax. You'll see printers you have setup before on the left. A green icon usually means they are available. If print doesn't work to the desired printer the best thing to do is remove the previous definitions by highlighting the printer and hitting the "-" icon.
Now hit the "+" sign and define the shared printer. It should be listed in the resulting "add Printer" dialog. Highlight, change any naming info and click "add".
Printer should now be available. I'm assuming a supported printer that have the device drivers loaded on your system.
That's all I got.

Can I use powerline wireless adapters with airport extreme

can I use power line wireless adapters with airport extreme?

Can this work?
Yes
I read somewhere that powerline adapters are not compatible with Airport.
That information is not correct.
If the AirPort Extreme is already set up as your "main" router, you would connect a short Ethernet cable from one of the LAN <-> ports on the Extreme to the power line adapter.
Locate another adapter in the area where you want to use the AirPort Express and connect a short Ethernet cable from the adapter to the Express.
Configure the Express to "create a wireless network" using the same wireless network name, same security settings and and same password as the AirPort Extreme network and select the Bridge Mode setting for the Express so that it work correctly on the network.

Windows XP Home & Wireless printing with Airport

I have a PC running Windows XP Home, a macBook connected wirelessly through an Airport Extreme and an HP Photosmart C3180 all-in-one printer. The printer is plugged (usb) into the airport extreme. The macBook prints wirelessly to the HP just fine. What I cannot get is the Windows PC to utilize the HP printer. The PC is a desk top and is not wireless. Am I trying to do something that is not possible? Does the HP printer need to be directly connected to the PC for it to work?

Are you trying to print without an Airport (Extreme or Express) Base Station? You won't be able to print without the specific equipment.
As far as trying to get the XP side of your MacBook to work, have you installed the latest Boot Camp available? The drivers for Boot Camp have been updated recently. Hope this helps!
Hello iFelix;
I desperatly need yor help.I just bought Macbook Mac
OS 10.4 and I installed WIndows XP SP2,Every thing is
working very fine except wireless network and
bluetooth. Bluetooth is not issue but wireless
yes.Network driver is working ok and Atheros Network
wireless Adapter is working properly.I use Linksys as
arouter. But somehow wireless network does not take
the signals.When use Macintosh side, there is no
problem and it is not asking any password, wireless
working just fine.I dont know what to do. I hope this
information would be helpful to solve the problem.PLS
HELP ME. THANK YOU.
Mac OS X (10.4.7)
15 Al PowerBook G4 Mac OS X (10.4.7)

My Airport Extreme just stopped working. The message says ethernet cable not plugged in, but it is. Cable modem works fine. Is this a common problem?

My 2-year-old Airport Extreme instantly stopped working last night and is flashing the status light. The problem description is that the ethernet cable is not plugged in... however, the ethernet cable is still plugged into the cable modem. I checked the modem by plugging directly into my laptop... it works fine. Is this a common problem? Is there anything I can try other than sending it in for warranty repair?

At this point, before sending it back, I would recommend that you do the following as a minimum:
Power-down the modem, AirPort base station, and computer(s).
Disconnect the AirPort base station from the Internet broadband modem.
While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
After the base station resets, go ahead and power it back down.
Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
Power-up your computer(s).
In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

Wireless printing with airport express/extreme?

i'm trying to figure out how to use either an express or an extreme (I have both) as a wireless print network of sorts. In the past I hooked up my modem to the extreme along with my printers, and was able to connect wirelessly to my computer; thus, wireless printing. i have since changed to google fiber (including that just in case that's part of the issue), and my modem/router is on a different level of the house than the rest of my computer setup, and i don't think it can be moved. All the solutions i've found require a computer to be directly connected to the modem/express for the initial setup, which isn't possible in this case as i don't have a laptop, just a desktop. Any suggestions would be much appreciated!

It helps if you use specifics.
Are you talking about a USB printer?
What is the google modem router??
How and where do you hope to place the airport and printer? ie will it be plugged into the main router by ethernet?
There is no problems doing the setup over wireless.. as long as wireless reaches the computer. There is also no problem manually setting up the airport router in total isolation from the network.. once setup you can place it back into the network.
Typical method of manual backup.
Airport Utility shows "unexpected error - please try again" when connecting to Time Capsule

HP printing with AirPort Extreme

I have a imac with Intel, OSX 10.6. I am using a HP Photosmart C7280 All-in-One printer, and have been for a few years and it has worked extremely well. Earlier this year my old airport extreme went bad and I purchased the latest one. It has the latest updates available. When I got the new Airport Extreme the directions said to plug the printer via USB cable into the Airport. I have been through the system preferences, deleted and added the printer, went through the manual set-up for the Airport Extreme, rebooted everything and it will NOT print. The Airport Utilities recognizes the printer and it tries to print and stops giving me a message of "Printer Paused", or printer offline. When I hit "resume", the printer cycles a bit and them goes to "Printer Paused" again. Everything worked great until I purchased the new Airport Extreme.
The printer works excellent when plugged into the back of my imac, however, it does not make my wife happy because she can't print from her laptop. My Son brought a friend home with him for the weekend that is a Software Engineer. He downloaded software and drivers and installed them and he could not get it to print with the USB cable plugged into the Airport either. He worked with it for 4 hours. The HP printer just will not communicate with the Airport. I have also been getting a message this evening that one of my ink cartridges has expired. I can shake it and it appears to be almost full. I opened a new one and get the same message that it is expired. I have had the new one for several months though because I hate running out of ink.
Any help would be most appreciated.

I am not exactly the sharpest tool in the shed when it comes to setting this stuff up. I was hooking the printer up to the Airport Extreme because the set-up instructions said to. When the software engineer was here, he could not get the wireless on the printer to find the Airport Extreme. The kid is pretty sharp but was under a lot of pressure to get done so that he and my Son could get on the road. He wasn't expecting to get into the hassles of setting this up.
This is probably mostly because of the name I have given to the Extreme being too long and not remembering, or KNOWING anything about this. I have given the Extreme one name and the network another. I don't know where the set-up instructions are and he was trying to guess. I just tried doing as you said to make the printer wireless but failed for the same reasons he did. I got a message to go back and check the set-up. I am not sure what I am supposed to check for. I guess I will have to change some of the set-up information on the router as far as naming the router and network.
When I got this pinter I did not have v.10.6 on the imac at the time. However, when I downloaded the software from HP, it was for 10.6 and 10.7. I just a few minutes ago got the printer to work with the USB cable plugged into the computer, actually a USB hub. Just a few minutes after i got the printer working by hooking it to the USB hub, a software update popped up for a HP printer update. For a bit of information, I have had problems with concentration since several war injuries in Viet Nam and I get lost easily. I don't mean to use this as an excuse, just explaining that I will be a bit slow following you. I was a Senior Radio Repairman and Communications Chief in the Army and head of the Crypto Center. Now I feel like a lost ball in high weeds. I can still work things out by reasoning to an extent, but sometimes it is very frustrating, so I ask that you bear with me.
Ed

Problem printing with Airport Extreme/Bonjour through Mozilla Firefox

Hi.
With the help of Apple's telephone tech support, I just set-up my new PowerBook G4 and Airport Extreme (including cable internet, desktop nonwireless PC, and HP LaserJet 3012).
I can now print from the PowerBook and through MS Word on the desktop. The problem is I can't print email or web pages through Mozilla Firefox on the PC. Has anyone else had any problems with this? Is there a Mozilla update that would fix it? Unfortunately, Apple tech support said they can't help with it since it is printing through other applications, just not Mozilla Firefox. They suggested I try this discussion board.
I haven't downloaded Mozilla Firefox on the PowerBook yet so I don't know if the Mozilla problem with replicate there too. I can print from Safari on the PowerBook right now.
Any suggestions?
Thanks!

Same problem, kind of... Have an Imac G5 with HP Laserjet 1012 connected usb. The Imac is direct wired to a 2Wire DSL wireless access point.
Setup bonjour on a (checks to make sure nobody is listening...) Toshiba Tecra L2 (Windows XP SP2). Prints fine from IE, refuses to print from firefox. Acts like it is printing, doesn't go. Prints fine from Word.
Setup bonjour on my wife's (covers mouth, looks embarrassed and coughs) dell d610 (windows xp sp2). Prints fine from ie and firefox. same network, same basic software.
Apple's bonjour site said something about an ie bonjour plugin, but that wouldn't explain why my wife's dell prints from firefox.
Anyone know if there is a firefox bonjour plug? haven't been able to find one. any suggestions on what settings would account for the differences. checked the firewall and exceptions in laptops.
Imac G5 Mac OS X (10.4.6)

My airport Extreme just stopped assigning IP addresses to wired devices

I have an fairly large home network that is run by an Airport Extreme.
- Comcast Cable Modem for 3 public (not static) IP addresses
- small switch to be able to obtain three addresses
- Apple Airport Extreme connected to the switch and it receives an IP address and internet connectivity from Comcast
- Airport Extreme connected to a 16 port Cisco switch to handle the wired connections in the house. I have 54 ports of which 9 are currently in use.
all wired devices connected through the wall and a patch panel to the Cisco switch.
The issue is that after working flawlessly for about a month (just moved into this house) it stopped today. any device going through the hardwired Cisco Switch is no longer getting an IP address from the Airport Extreme.
I replaced the switch with a second one to see if that was the failure and it is not.
I unplugged the Cisco Switch from the Airport Extreme and plugged devices directly into the Airport Extreme 1 by 1 and they were able to obtain IP addresses.
I need more than the three ports available on the Airport extreme.
What changed and what do I do?

I unplugged the Cisco Switch from the Airport Extreme and plugged devices directly into the Airport Extreme 1 by 1 and they were able to obtain IP addresses.
This tells you that the AirPort Extreme is working correctly and the issue....whatever it is....is appearing after the AirPort Extreme on the network.
A few thoughts:
You have tested the ports on the AirPort Extreme and they are working, so the next step would be to disconnect the Ethernet cable that runs from the AirPort Extreme to the switch at the switch, and then connect a laptop to the Ethernet cable to check to make sure that you are getting a good IP address that way.
If you cannot, then you have a bad Ethernet cable between the AirPort Extreme and switch that will need to be replaced.
If the laptop is getting a good IP address when you run this "test", then you know that the AirPort Extreme and Ethernet cable are working correctly and the troubleshooting focus must now move to the switch.
Check to make sure that you have an unmanaged switch. Or, if it is managed design, that it has been configured to operate as an unmanaged switch.
Next, connect the Ethernet cable from the AirPort Extreme to the switch and disconnect all of the other Ethernet cables that are connected to the switch and test each port one by one with your laptop and a spare Ethernet cable to make sure that each port is working correctly.
If you cannot get a good IP address on your first test with the laptop connected to the switch, then you know that you have a misconfigured or defective switch.
If the switch checks out OK when you test each port, then the next step is to connect one of the Ethernet cables that runs to another area, and connect your laptop to the Ethernet cable to make sure that the cable is working correctly. Continue to test each Ethernet cable the same way.
About 95% of the time in issues like you are having, the problem is bad wiring somewhere on the network, even though the "tech" said that he tested everything. The trick is to find it....when there are no shortuts.

HP Deskjet F380 problem printing with airport extreme

Have tried everything under the sun from the apple and HP support websites and cannot get my printer to work wirelessly. When I try to add my printer, I get error message "-9672". Any other suggestions. Already spent 90 minutes on HP support and they gave me "their best effort", meaning they didn't think they could really help with outside products. Thanks.

Hello jds17. Welcome to the Apple Discussions!
Unfortunately, not all USB printers are compatible with AirPort base stations.
Take a look at one of these iFelix Unofficial AirPort Printer Compatibility links, depending on which AirPort base station you have:
o 802.11g AirPort Extreme Base Station (AEBS) or AirPort Express Base Station (AX)
o 802.11n AirPort Extreme Base Station (AEBSn)
If your printer isn't listed, it doesn't necessarily mean it won't work, but simply that it has not been verified. iFelix also provides the following workaround for printers not on the list that would certainly be worth a try.
Also, you may find the following Apple article helpful.

How to do wireless printing with aiport extreme and HP c4280

I admit it... I'm a dunce. I usually just plug the usb for the hp c4280 printer right into my macbook pro, but I want to finally be able to use it wirelessly. I have an airport extreme, and i know there is a usb port... how do I add the printer so i can print wirelessly?
obviously i can't just plug it in and print (right? becuase i tried and no go on the printing).
someone please take pity on me!
thanks!

Download the install Bonjour Print Services for Windows v2.0.2
Run the program. Hopefully, your printer will be recognized.
If it is, "install" the printer and try to print.
Keep in mind that if you have an All-in-One type of device, that only the print function will be supported.
Advanced features like copy, scan, maintenance, etc are not supported. You will need to connect the All-in-One directly to your PC if you need those services.

Wireless Printing with Airport Extreme just stopped

Similar Messages

Maybe you are looking for